Scribd
Upload
31 views

Section 1

The document provides information about the geometry and properties of an ISMC200 steel structural section. It includes dimensions of 150 x 200 mm and details geometric properties like cross-sectional area, moments of inertia, radii of gyration, elastic and plastic moduli, and dimensions to centroids, edges of compression zones, and principal axes. The section can be rotated 180 degrees without changing its material properties of steel with an elastic modulus of 205 kN/mm^2.

Uploaded by

Ganesh Rasankar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Section 1

The document provides information about the geometry and properties of an ISMC200 steel structural section. It includes dimensions of 150 x 200 mm and details geometric properties like cross-sectional area, moments of inertia, radii of gyration, elastic and plastic moduli, and dimensions to centroids, edges of compression zones, and principal axes. The section can be rotated 180 degrees without changing its material properties of steel with an elastic modulus of 205 kN/mm^2.

Uploaded by

Ganesh Rasankar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Z Y

Section element Rotation Mirror Material E (kN/mm^2)


angle
S Shapes ISMC200 Steel 205.0
S Shapes ISMC200 180.0 Steel 205.0

The overall dimensions of the section are 150 x 200 mm

Basic geometry of the section


Parameter Value
A Cross sectional area 5642.0 mm2
 Angle between Y-Z and U-V axes -0.0 deg
Iy Moment of inertia about axis parallel to Y 36386001.74 mm4
passing through centroid
Iz Moment of inertia about axis parallel to Z 17540466.61 mm4
passing through centroid
It Torsional moment of inertia (St. Venant) 184000.0 mm4
Iw Warping constant 0.0 mm6
iy Radius of gyration about axis parallel to Y 80.31 mm
passing through centroid
iz Radius of gyration about axis parallel to Z 55.76 mm
passing through centroid
Wu+ Elastic modulus about U-axis (+ve extreme) 363860.01 mm3
Wu- Elastic modulus about U-axis (-ve extreme) 363860.01 mm3
Wv+ Elastic modulus about V-axis (+ve extreme) 233872.88 mm3
Wv- Elastic modulus about V-axis (-ve extreme) 233872.88 mm3
Wpl,u Plastic modulus about axis parallel to U-axis 417759.03 mm3
Wpl,v Plastic modulus about axis parallel to V-axis 294502.36 mm3
Iu Moment of inertia about U-axis 36386001.74 mm4
Iv Moment of inertia about V-axis 17540466.61 mm4
iu Radius of gyration about U-axis 80.31 mm
iv Radius of gyration about V-axis 55.76 mm
au+ Centroid to edge of compression zone along +ve 41.45 mm
U-axis
au- Centroid to edge of compression zone along -ve 41.45 mm
U-axis
av+ Centroid to edge of compression zone along +ve 64.49 mm
V-axis
av- Centroid to edge of compression zone along -ve 64.49 mm
V-axis
yM Geometric axes origin to centroid along Y-axis 75.0 mm
zM Geometric axes origin to centroid along Z-axis -100.0 mm
yP From geometric origin to geometric equal area 75.99 mm
axes along Y
zP From geometric origin to geometric equal area -100.27 mm
axes along Z
Iyz Moment of inertia Iyz in the user coordinates 0.0 mm4
uP From principal origin to principal equal axes -0.99 mm
along U
vP From principal origin to principal equal axes -0.27 mm
along V

You might also like