Scribd
Upload
16 views3 pages

QS-302 110907

QUICSEAL 302 is a two-component, non-pigmented epoxy resin used for injection sealing of cracks, bonding materials, and more. It has excellent adhesion strength when cured. It can be used for crack injection, anchoring, adhesive, sealing, and more construction applications. The document provides technical data on the product including ratios, strengths, pot life, uses, and safety precautions.

Uploaded by

Gobi Nava
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views3 pages

QS-302 110907

QUICSEAL 302 is a two-component, non-pigmented epoxy resin used for injection sealing of cracks, bonding materials, and more. It has excellent adhesion strength when cured. It can be used for crack injection, anchoring, adhesive, sealing, and more construction applications. The document provides technical data on the product including ratios, strengths, pot life, uses, and safety precautions.

Uploaded by

Gobi Nava
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

QUICSEAL 302

Product Name

Epoxy Resin

Description
QUICSEAL 302 is a two-component, non-pigmented low viscosity epoxy resin.
When cured, QUICSEAL 302 has excellent adhesion strength to most building substrates to
provide good water resistance and protection against chemical attack.

Uses
 injection sealing of hairline cracks in concrete structures and masonry
 grouting and anchoring of starter bar
 excellent adhesive for bonding together concrete, steel, ceramic or wood materials
 Sealer for all cement-based surfaces eg. in parking garages, factories and workshops
 binder for abrasion-resistant self-leveling mortars for high service temperature and
mechanical loads at the same time
 Rebonding and cavity filling of hollow walls and floors
 grouting machinery base when combined with clear dry silica sand
 virtually impermeable to carbon dioxide and protects the concrete against carbonation

QUICSEAL – the professional’s choice of quality products and systems for building construction
Technical Data

Mixed Ratio (A:B) 2.5: 1 (By volume)


3
Density 1070 kg/m
Solids Content 100%
2
Tensile Strength 55N/mm
(BS 6319: Part 7 at
20C – 7 days)
2
Compressive Strength > 50N/mm
(ASTM D695 – 02a)
2
Flexural Strength 50N/mm
(BS 6319: Part 3 at
20C – 7 days)
Tensile Bond Strength Concrete failure
Shore D Hardness 85
Usable Pot-life 30 – 45 mins
Storage Life (at 30c) 12 months in original containers
Flash Point over 65c
Physical or Chemical Change Chemical cure

Instruction for Use


QUICSEAL 302 injection is particularly useful as a method of carrying out structural repairs of
concrete and masonry. It forms a bond between the broken sections stronger than the
materials itself and seals the cracks the cracks against ingress of water and other aggressive
agents which may have a deleterious effect on reinforcement.

Before deciding to inject cracks, the cause of the cracks must be established and ensure that
they are not still moving by using suitable tell tale devices. If movement is occurring, the crack
should be treated as a normal movement joint. Otherwise, the crack and surrounding surface
must be thoroughly clean, dry and all loose debris removed.

QUICSEAL 304 EPOXY PUTTY is then used to the surface and bond on the injection nipples
will be approximately 1 ½ - 2 times (less for very fine cracks) the thickness of the concrete
member to be repaired. Cracks through the entire thickness of the concrete member should be
sealed on both sides. Once QUICSEAL 304 EPOXY PUTTY has hardened, which normally
takes about an hour, the injection resin is mixing by using slow-speed drill and paddle for about
2-5 minutes until a homogenous honey colored liquid is achieved. Simply inject the mixed resin
into the horizontal or vertical cracks.

QUICSEAL – the professional’s choice of quality products and systems for building construction
Other Applications
As a Primer or Sealer
Apply QUICSEAL 302 by roller, brush or broom over a properly cleaned and textured surface.
2
Apply in one layer as a primer bond coat and two layers as a sealer at 200 to 350 gm/ m . As a
self-leveling mortar or repair mortar.
Apply a first layer of QUICSEAL 302 as a primer coat. Scatter the freshly applied area with dry
2
sand at 1kg/m .
Use fine filler for the final topping. Sand content will depending on application. (Trowel or self-
leveling).
As an Anchoring System
QUICSEAL 302 is suitable for use as a normal set anchoring material for dowel bars and
anchor bolts.
For vertical surfaces, use QUICSEAL EPOXY PUTTY.

Coverage
1 liter will fill a length of 13m for a cavity of 25mm deep by 3mm wide.

Cleaning of Tools
Tools and equipment may be cleaned with xylene or aromatic solvents

Packing
QUICSEAL 302 is supplied pre-weighed in 2.5ltr set.

Precaution
 As with all EPOXY RESIN products, wear protective overalls and gloves- prolonged
contact with the skin should be avoided.
 ensure adequate ventilation
 Skin contamination should be cleaned immediately with soap and plenty of water. If resin
or hardener enters the eyes, wash immediately with running water and consult a doctor
immediately

Important Notes

The information set forth herein is furnished in good faith and is based on technical data that QUICSEAL considers to be reliable. This
information is intended for used by persons having technical skill and at their own discretion and risk. Information contained in this
product sheet conforms to the standard detail recommendations and specifications for the installation of QUICSEAL products as of the
date of publication of this document. QUICSEAL makes no other warranties and assumes no liability, expressed or implied, as to the
architecture, engineering or workmanship of any project. To ensure that you are using the latest, most complete information, contact
QUICSEAL

Reference No.: QS 302/110907

QUICSEAL – the professional’s choice of quality products and systems for building construction

You might also like