TECHNICAL SPECIFICATIONS

FORD MUSTANG – EUROPEAN SPECIFICATIONS

PERFORMANCE AND ECONOMY

Fuel consumption
Performance
(l/100 km WLTP) 1
0-100 km/h
Power CO2 Max speed
Engine Combined 0-62 mph
(PS) (g/km) km/h
(sec)
5.0-litre V8
fastback 450 268 - 276 11.8 – 12.1 249 4.6
(6-speed manual)
5.0-litre V8
fastback
450 256 - 265 11.2 – 11.6 249 4.3
(10-speed
Selectshift auto)
5.0-litre V8
convertible 450 268 - 276 11.8 – 12.1 249 4.8
(6-speed manual)
5.0-litre V8
convertible (10-
450 256 - 265 11.2 – 11.6 249 4.5
speed Selectshift
auto)
Mach 1 (6-speed
460 284 12.4 267 4.8
manual)
Mach 1 (10-speed
460 270 11.7 249 4.4
Selectshift auto)

1
CO2 emission and fuel efficiency ranges may vary according to vehicle variants offered by individual
markets.

The declared WLTP fuel/energy consumptions, CO2-emissions and electric range are determined
according to the technical requirements and specifications of the European Regulations (EC) 715/2007
and (EU) 2017/1151 as last amended. The applied standard test procedures enable comparison between
different vehicle types and different manufacturers.

BODY

Construction Unitised welded steel body, aluminium bonnet and front wings
Body Styles Fastback and Convertible; Left-hand and Right-hand Drive
Final assembly location Flat Rock, Michigan, USA

For news releases, related materials, photos and video, visit www.fordmedia.eu or www.media.ford.com.
Follow http://www.twitter.com/FordNewsEurope or www.youtube.com/FordNewsEurope
ENGINE

Configuration Aluminium block and heads

Intake manifold Composite shell-welded with runner pack and charge motion control
valves.
Shelby GT350 induction system, 87 mm throttle body (Mach 1)
Exhaust manifold Stainless steel tubular manifold
Valvetrain DOHC, four valves per cylinder, twin independent variable camshaft
timing
Valve diameter/lift (mm) Intake 37.7 /13
Exhaust 32.0 /13
Pistons Cast aluminium
Connecting rods Forged steel
Ignition Distributor-less with coil-on-plug
Bore x stroke (mm) 93.0 x 92.7
Displacement (cc) 5038
Compression ratio 12.0:1
Engine control system PCM
Power 450 PS (331 kW) @ 7000 rpm 460 PS (338 kW) @ 7250 rpm
(Mach 1)
Torque 529 Nm @ 4600 rpm 529 Nm @ 4900 rpm (Mach 1)
Fuel capacity (litre) 61
Fuel delivery Dual-injection system featuring low-pressure port fuel injection and high-
pressure direct injection
Oil system 9.5-litre 5W-20 with filter

Shelby GT350 air-to-oil cooler, bespoke engine oil filter adaptor (Mach 1)

DRIVETRAIN

Layout Rear-wheel drive with limited-slip differential

Transmission oil cooler and rear axle cooler (Mach 1)

TRANSMISSION

Standard 6-speed manual 10-speed Selectshift TREMEC TR-3160 6-

automatic speed manual (Mach 1)
Gear ratios
First 3.24 4.70 3.25
Second 2.10 2.99 2.23
Third 1.42 2.15 1.61
Fourth 1.00 1.77 1.24
Fifth 0.81 1.52 1.00
Sixth 0.62 1.28 0.63
Seventh N/A 1.00 N/A
Eighth N/A 0.85 N/A
Ninth N/A 0.69 N/A
Tenth N/A 0.64 N/A
Final drive 3.55 3.35 3.55

For news releases, related materials, photos and video, visit www.fordmedia.eu or www.media.ford.com.
Follow http://www.twitter.com/FordNewsEurope or www.youtube.com/FordNewsEurope
SUSPENSION

Front Double-ball-joint independent MacPherson strut and tubular stabiliser bar

Rear Integral-link independent with coil springs, solid stabiliser bar and mono-tube
dampers
Optional MagneRide® Damping System with Monotube rear dampers and inverted
monotube front dampers; suspension position sensors and Vehicle Dynamics
Module (standard on Mach 1)

BRAKES

Type Four-wheel power disc brakes with four-sensor, four-channel anti-lock braking
system and AdvanceTrac electronic stability control.

High performance brake booster and dedicated undertray brake-cooling fins

(Mach 1)
Front 380 mm x 34 mm vented discs, Brembo six-piston 36 mm fixed aluminium
callipers
Rear 330 mm x 25 mm vented discs, single-piston 45 mm floating iron callipers, integral
parking brake

STEERING

Type Selectable electric power-assisted steering with rack-and-pinion gear

Ratio 16:1
Turning circle, kerb-to-kerb 12.2 m

WHEELS AND TYRES

5.0-litre V8 Front: 255/40 R19 tyres, 19-inch x Rear: 275/40 R19 tyres, 19-inch x
9-inch aluminium wheels 9.5-inch aluminium wheels
Mach 1 Front: 255/40 R19 tyres, 19-inch x Rear: 275/40 R19 tyres, 19-inch x
9.5-inch aluminium wheels 10-inch aluminium wheels

DIMENSIONS

Fastback Convertible
EXTERIOR
Wheelbase (mm) 2720 2720
Overall length (mm) 4789 4789
Overall width excluding mirrors (mm) 1916 1916
Overall width including mirrors (RHD) (mm) 2081 (2097) 2081 (2097)
Overall width mirrors folded (RHD) (mm) 1957 (1985) 1957 (1985)
Overall height (max) (mm) 1382 (1403) 1396
Track, front/rear (mm) 1642/1642 1642/1642
1594/1646 (Mach 1)
Minimum ground clearance (kerb) (mm) 144 144
120 (Mach 1)

For news releases, related materials, photos and video, visit www.fordmedia.eu or www.media.ford.com.
Follow http://www.twitter.com/FordNewsEurope or www.youtube.com/FordNewsEurope
INTERIOR
Seating capacity Four Four
Front headroom (mm) 955 954
Front legroom – maximum (mm) 1146 1146
Front shoulder room (mm) 1430 1430
Front hip room (mm) 1395 1395
Rear headroom (mm) 884 906
Rear legroom (mm) 737 742
Rear shoulder room (mm) 1327 1135
Rear hip room (mm) 1203 1111
Loading Width Between Wheelhouses (mm) 1010 1010
Load Opening Width at floor (mm) 640 640
Liftover Height (kerb) (mm) 761 761
Cargo volume (litre) 2 408 332
2
Measured in accordance with ISO 3832. Information provided for base vehicle, except where specified.
Dimensions may vary dependent on the model and equipment fitted.

WEIGHTS

Kerb weight Gross Vehicle Mass

(kg) 3 (kg)

5.0-litre V8 fastback (6-speed manual) 1744 2105

5.0-litre V8 fastback (10-speed Selectshift auto) 1757 2105
5.0-litre V8 convertible (6-speed manual) 1807 2150
5.0-litre V8 convertible (10-speed Selectshift auto) 1818 2150
Mach 1 (6-speed manual) 1839 2114
Mach 1 (10-speed Selectshift auto) 1861 2150

3
Represents the lightest kerbweight assuming driver at 75 kg, full fluid levels and 90 per cent fuel levels,
subject to manufacturing tolerances and options, etc., fitted.

###

Note: The data information in this press release reflects preliminary specifications and was correct at the
time of going to print. However, Ford policy is one of continuous product improvement. The right is
reserved to change these details at any time.

MagneRide® is a trademark of BWI Group.

About Ford Motor Company

Ford Motor Company (NYSE: F) is a global company based in Dearborn, Michigan, that is committed to
helping build a better world, where every person is free to move and pursue their dreams. The
company’s Ford+ plan for growth and value creation combines existing strengths, new capabilities and
always-on relationships with customers to enrich experiences for and deepen the loyalty of those
customers. Ford designs, manufactures, markets and services a full line of connected, increasingly

For news releases, related materials, photos and video, visit www.fordmedia.eu or www.media.ford.com.
Follow http://www.twitter.com/FordNewsEurope or www.youtube.com/FordNewsEurope
electrified passenger and commercial vehicles: Ford trucks, utility vehicles, vans and cars, and Lincoln
luxury vehicles. The company is pursuing leadership positions in electrification, connected vehicle
services and mobility solutions, including self-driving technology, and provides financial services through
Ford Motor Credit Company. Ford employs about 183,000 people worldwide. More information about the
company, its products and Ford Motor Credit Company is available at corporate.ford.com.

Ford of Europe is responsible for producing, selling and servicing Ford brand vehicles in 50 individual
markets and employs approximately 41,000 employees at its wholly owned facilities and consolidated
joint ventures and approximately 55,000 people when unconsolidated businesses are included. In
addition to Ford Motor Credit Company, Ford Europe operations include Ford Customer Service Division
and 14 manufacturing facilities (10 wholly owned facilities and four unconsolidated joint venture facilities).
The first Ford cars were shipped to Europe in 1903 – the same year Ford Motor Company was founded.
European production started in 1911.

Contacts: Finn Thomasen

Ford of Europe
[email protected]

For news releases, related materials, photos and video, visit www.fordmedia.eu or www.media.ford.com.
Follow http://www.twitter.com/FordNewsEurope or www.youtube.com/FordNewsEurope