Question Bank MSC ISE
Question Bank MSC ISE
2. Describe the cellular wireless network. Compare each other its generations.
3. What are the basic devices used in cellular operation? Describe the operation of cellular
operation systems and its benefits.
4. What are the GSM applications? How does it operate? Explain GSM content of Network planning
and wireless network planning.
5. Describe wireless network plan coverage as well as capacity in different conditions. How can you
optimize it?
6. What are QoS matters in cellular communications? Explain.
7. What are vital issues in cellular communications? How can you resolve it?
8. How can you characterize frequency reuse? Explain frequency reuse for cluster size 4. What
would be the minimum distance between the centers of two cells with the same band of
frequencies if cell radius is 1 km and reuse factor is 12?
9. Explain various handoff strategies and practical considerations in cellular system.
10. What is 0G wireless communication? How it is differ than Advanced Mobile Phone System?
11. What are the cellular network designs approaches to increase capacity and it security issues to
1G wireless communications?
12. What are the general characteristics of 2G cellular communication? Explain its architecture.
What are advantages of Digital Communications for Wireless? Differentiate between 1G and
2GSystems.
13. A particular cellular system has cluster size =7, uniform cell size, user density =100 users/sq km,
allocated frequency spectrum = 900-949 MHz, bit rate required per user =10kbps uplink and 10
kbps downlink, and modulation code rate =1 bps/Hz. A. Using FDMA/FDD: How much bandwidth
is available per cell using FDD? How many users per cell can be supported using FDMA? What is
the cell area? What is the cell radius assuming circular cell? B. If the available spectrum is divided
in to 35 channels and TDMA is employed within each channel: What is the bandwidth and data
rate per channel? How many time slots are needed in a TDMA frame to support the required
number of users? If the TDMA frame is 10 ms, how long is each user slot in the frame? How
many bits are transmitted in each time slot?
14. What are the general characteristics of GSM (2G-TDMA)? Explain its architecture. What are the
functions provided protocols? Write drawbacks of CDMA cellular.
15. Differentiate between 3G and 4G system of communications. What are the engineering issues?
Explain the steps in an MTSO Controlled Call between Mobile Users.
16. What is WiMax? What are advantages and limitations of WiFi?
17. Explain how the path loss is predicted in hilly terrain. If a transmitter produces 50 W power,
express the transmit power in the units of (a) dBm (b) dBW. If 50 W is applied to unity gain
antenna with a 900 MHz carrier frequency, find the deceived power in dBm at a free space
distance of 100 m from the antenna. Assume unity gain for the receiver antenna.
18. Explain the small scale fading based on both multi-path time delay spread and Dopplor spread.
19. Explain Hata Model.
20. Explain Walfish-Ikegami Model.
21. What are different mechanisms to affect radio wave propagation? Explain.
22. Describe propagation characteristics differ with the environment through and over which radio
waves travel.
23. How can you measure capacity of wireless network? What are the approaches of increasing
capacity?
24. What is channel allocation? Describe the channel allocation schemes.
25. What is radio planning? To minimize cost and maximize traffic, what should you have to do?
26. Explain Self Organize Network.
27. What is Green Wireless Network? Explain.