ACOUSTICS

SOUND INTENSITY
P R O D U C T D ATA SOUND POWER DETERMINATION, SOUND SOURCE LOCATION.
SI2020 - V2.1. When “where the sound is coming from” is in question, nothing is as simple and as intuitive, as our sound intensity solution.
INTRODUCTION APPLICATIONS FUNCTIONALITY
Sound Intensity is part of the solutions • Sound power determination, e.g. for Sound intensity is a measure of the noise Sound intensity – troubleshooting
offered by Dewesoft for industrial acoustic product noise labelling per unit area and is used when measuring
applications. Sound Intensity is an • Sound source identification and noise generated by a machine or device Sound intensity measurements can
experimental technique providing detailed localization, e.g. compressors, pumps, in operation. Sound intensity allows identify, localize, quantify and map critical
information, such as Sound Power or Noise gearboxes, rotating machinery, trans- calculation of the ISO sound power value. sound sources and detect acoustic leaks
Source localization, on the sound patterns formers and HVAC systems. and hot spots providing a basis for noise
emitted from a source. Simple scans for • Troubleshooting on machinery, e.g. Sound power – noise compliance reduction and improvement of products
viewing intensity levels and complex scans vehicle NVH performance and components.
for developing a sound map of the test • Building acoustics evaluation The Sound Intensity solution complies
area are both common techniques used • Noise in the workplace to sound intensity-based sound power
with sound intensity. calculation - discrete points segmentation
method (ISO 9614-1) and scanning method
(ISO 9614-2) to determine product noise.

SOFTWARE

RS232 TO USB

SIRIUS MINI

OBJECT UNDER TEST

SOUND INTENSITY PROBE

QUICK SOUND SOURCE

COMPLIES TO SOUND POWER

ADAPTED FOR IN-SITU AND

UNMATCHED FLEXIBILITY
Measure additional process parameters like
vibration, video and others, all synchro-
nized.

SUPPORTS MAJOR
MANUFACTURERS HARDWARE
Use any intensity probes from all major
manufacturers - plug and play - integrating
remote control functionality.

IEC 61672 CALIBRATION

AUTOMATED PHASE
CALIBRATION
Enjoy straightforward, automated phase
calibration and correction with a single
button click.
SPECS
DAQ SYSTEM - SIRIUS ACC TYPE INPUT SOFTWARE: DEWESoft X3
Inputs Recommended
Input types Intel Core i7 with 4 Cores (3rd
Voltage, IEPE Processor: generation or higher)
ADC Type 24bit delta-sigma dual core with anti-aliasing filter RAM: 8 gigabyte (GB)
Sampling Rate Simultaneous 200kS/sec Hard drive: Solid-state drive (SSD)
Ranges (Dual Core Low Range) ±10V (±500mV) ±500mV (NA) Graphic card: Compatible with DirectX 11
Input Accuracy (Dual Core) ±0.1% of reading ±10(1)mV ±0.1 of reading ±1(NA)mV Display 1280x720 (HD Ready)
Operating system: Windows 10 64-bit
Dynamic Range@10kS (Dual Core) 140 dB (160 dB) 135 dB (NA) LEARN MORE:
Typ. SNR@50kS (Dual Core) 107 dB (125 dB) 100 dB (NA) *Actual requirements may be different due to specific https://dewesoft.com/applications/
link
setup configuration.
Typ. CMR @ 50Hz/1kHz 140/120 dB 140/120 dB acoustics/sound-intensity
Gain Drift Typical 10 ppm/K, max. 30 ppm/K TYPICAL CONFIGURATIONS
Offset Drift Typical 0.5 μV/K + 2 ppm of range/K, max 2 μV/K + 10 ppm of range/K DEWESOFT G.R.A.S. BASIC
• DEWESoft SI: sound intensity plugin HEADQUARTERS
Gain Linearity <0.02% • SIRIUSm-4xACC: Sirius mini, 4 Channels Gabrsko 11A, 1420 Trbovlje, Slovenia
• 50GI-R CCP: Sound intensity probe inlc. preampli-
Inter Channel Phase-mismatch 0.02° * fin [kHz] + 0.1° (@ 200 kS/sec) fier, remote control, G.R.A.S. +386 356 25 300
Channel Cross talk >160 dB @ 1kHz
• 42AG: G.R.A.S. Multifunction Sound Calibrator, www.dewesoft.com
Class 1 [email protected]
• Meteo: SPARC meteo (Temp., humidity and static
Input Coupling DC, AC 0.1 Hz,1Hz pressure) or [email protected]
Input Impedance 1 MΩ (270kΩ for AC coupling ≥ 1Hz) in parallel with 100pF • CPB-CAL: Filter calibration according to IEC 61260
• UC-232A: USB to RS-232 Adapter (35cm)
Overvoltage Protection In+ to In-: 50 V continuous; 200V peak (10msec)
DEWESOFT G.R.A.S. ADVANCED
• DEWESoft SI sound intensity plugin
IEPE mode
• SIRIUSi-8XACC, 8XAO: Sirius, 8 Channels, 8 Analog DEWESOFT WORLDWIDE:
Excitation 2, 4, 8, 12, 16 or 20mA outputs Austria, Belgium,
Brasil, Belgium,
Brazil, China, Den-
• 12AB: G.R.A.S. 12AB 2-Channel Power Module
Compliance voltage 25 Volt • 42AG: G.R.A.S. Multifunction Sound Calibrator, mark, France, Germany, Hong Kong,
Class 1 Italy, India,
India, Italy, Mexico,
Russia, Singapore,
Russia, Singapore,
Sweden,
Output Impedance >100 kΩ • 51AB: Sound intensity calibrator, G.R.A.S. UK, USA - Sweden,
Slovenia, partners UK,
in more
USA than
and part-
50
• Meteo: SPARC meteo (Temp., humidity and static
Sensor detection Shortcut: <4Volt; Open: > 19Volt pressure) countries
ners in more than 50 countries.
• CPB-CAL: Filter calibration according to IEC 61260
Counters (ACC+ type only) • UC-232A: USB to RS-232 Adapter (35cm)
Inputs 1 digital counter input, 3 digital inputs, Fully synchronized with analog data DEWESOFT KIT (SUPPORTS B&K PROBE)
Counter Modes counting, waveform timing, encoder, tacho, gear-tooth sensor
•
•
DEWESoft SI: sound intensity plugin
SIRIUSm-4xACC - Sirius mini, 4 Channels
FIND YOUR SALES OFFICE AT:
• 12AB: G.R.A.S. 12AB 2-Channel Power Module dewesoft.com/support/distributors
Additional Specifications • Adapter LEMO: 18 pin LEMO to 12 pin & RS232
Input connector BNC BNC adapter
• Meteo: SPARC meteo (Temp., humidity and static
TEDS support pressure)
IEPE mode only • CPB-CAL: Filter calibration according to IEC 61260
• UC-232A: USB to RS-232 Adapter (35cm)

RELATED PRODUCTS
OPTIONAL ACCESSORIES
• 42AA G.R.A.S. Pistonphone, Class 1
• Sound Power • 50GI-CAL: Microphone calibration IEC 1043 Class
1 accredited
• Sound Quality • 42AG-CAL: Calibrator calibration IEC 60952
• RT60 accredited
• Sound Level Meter • 51AB-CAL: Calibrator calibration IEC accredited