दि ण पि म रे लवे

SOUTH WESTERN RAILWAY

मंडलीय कायालय / Divisional Office आरॆ ख अनुभाग / Drawing Section
सं. H/W.100/west / Genl / Drg काय शाखा,हबली / Works Branch, Hubli
काय का नाम Hubballi Division- Proposed construction of Type-II staff quarters 4-units at Caranzol station
NAME OF
मा ा इकाई दर कु ल
SN DSR No काय का िववरण DESCRIPTION
QTY UNIT RATE TOTAL
Earth work in excavation by mechanical means (Hydraulic
excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m
1 2.6.1 in width as well as 10 sqm on plan) including getting out and disposal 430.1 cum 205.45 88364.05
of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by
Engineer-in-charge. All kinds of soil
Extra for every additional lift of 1.5 m or part thereof in excavation /
2 2.26.1 60 Cum 104.50 6270.00
banking excavated or stacked materials. All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth,
3 2.25 215.05 Cum 253.95 54611.95
consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift upto 1.5 m.
Supplying and filling in plinth with sand under floors, including
4 2.27 20 Cum 2161.2 43224.00
watering, ramming, consolidating and dressing complete
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
5 4.1.6 122 Cum 6670.25 813770.50
level 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone
aggregate 40 mm nominal size)
Random rubble masonry with hard stone in foundation and plinth
including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse
6 7.1.1 93 cum 6653.45 618770.85
sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level
with :
Providing and laying damp-proof course 40mm thick with cement
7 4.10 concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone 50 sqm 370.85 18542.50
aggregate 12.5mm nominal size)
Providing and laying in position machine batched and machine mixed
design mix M-25 grade cement concrete for reinforced cement
concrete work, using cement content as per approved design mix,
including pumping of concrete to site of laying but excluding the cost
of centering, shuttering, finishing and reinforcement, including
8 5.33.1.1 admixtures in recommended proportions as per IS: 9103 to accelerate, 114 cum 8683.80 989953.20
retard setting of concrete, improve workability without impairing
strength and durability as per direction of Engineer-in-charge. (Note :-
Cement content considered in this item is @ 330 kg/cum. Excess/ less
cement used as per design mix is payable/recoverable separately). All
works upto plinth level
Providing and laying in position machine batched and machine mixed
design mix M-25 grade cement concrete for reinforced cement
concrete work, using cement content as per approved design mix,
including pumping of concrete to site of laying but excluding the cost
of centering, shuttering, finishing and reinforcement, including
9 5.33.2.1 admixtures in recommended proportions as per IS: 9103 to accelerate, 90 cum 10306.2 927558.00
retard setting of concrete, improve workability without impairing
strength and durability as per direction of Engineer-in-charge. (Note :-
Cement content considered in this item is @ 330 kg/cum. Excess/ less
cement used as per design mix is payable/recoverable separately). All
works above plinth level upto floor V level
Centering and shuttering including strutting, propping etc. and removal
10 5.9.1 of form for : Foundations, footings, bases of columns, etc. for mass 300 sqm 307.95 92385.00
concrete
Centering and shuttering including strutting, propping etc. and removal
11 5.9.3 of form for : Suspended floors, roofs, landings, balconies and access 260 sqm 766.55 199303.00
platform
Centering and shuttering including strutting, propping etc. and
12 5.9.5 removal of form for : Lintels, beams, plinth beams, girders, bressumers 490 sqm 608.35 298091.50
and cantilevers
Centering and shuttering including strutting, propping etc. and removal
13 5.9.6 270 sqm 804.25 217147.50
of form for : Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc. and removal
14 5.9.19 44 sqm 814.95 35857.80
of form for : Weather shade, Chajjas, corbels etc., including edges
 Providing and laying factory made Precast concrete solid blocks of
200 mm thickness of grade M10 made of C&D waste from
15 26.69.1 84 cum 8086.60 679274.40
approved manufacturer in superstructure above plinth level up to
floor V level Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of
16 6.1.2 class designation 7.5 in foundation and plinth in: Cement mortar 1:6 10 cum 6658.25 66582.50
(1 cement : 6 coarse sand)
9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door
Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm
x 15 mm to receive shutter of 30 mm thickness. The laminate shall be
moulded with fire resistant grade unsaturated polyester resin and
17 9.121 40 metre 702.6 28104.00
chopped mat. Door frame laminate shall be 2mm thick and shall be
filled with suitable wooden block in all the three legs. The frame shall
be covered with fiber glass from all sides. M.S. stay shall be provided
at the bottom to steady the frame.
Providing and fixing to existing door frames. 30 mm thick Glass Fibre
Reinforced Plastic (FRP) panelled door shutter of required colour and
approved brand and manufacture, made with fire - retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate for
18 9.122.1 12.6 sqm 3496.75 44059.05
forming hollow rails and styles, with wooden frame and suitable blocks
of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to
IS: 14856, including fixing to frames.
Providing and fixing ISI marked M.S. pressed butt hinges bright
19 9.55.1 24 each 48 1152.00
finished with necessary screws etc. complete : 125x65x2.12 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868 ) transparent
20 9.97.4 16 each 75.55 1208.80
or dyed to required colour or shade, with necessary screws etc.
complete : 150x10 mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
21 9.100.2 48 each 53.25 2556.00
to required colour or shade, with necessary screws etc. complete : 100
mm
Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position with hold fast
22 9.1.1 lugs or with dash fasteners of required dia & length ( hold fast lugs or 3.276 cum 131576.95 431046.09
dash fastener shall be paid for separately). Second class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to

frame with 10 mm diameter bolts, nuts and wooden plugs and
23 9.53 120 each 194.35 23322.00
embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement
: 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction
with frame of 1st class hard wood and well matched commercial 3 ply
24 9.21.1 52 sqm 2015.75 104819.00
veneering with vertical grains or cross bands and face veneers on both
faces of shutters: 35 mm thick including ISI marked Stainless Steel butt
hinges with necessary screws
Extra for providing lipping with 2nd class teak wood battens 25 mm
25 9.23 minimum depth on all edges of flush door shutters (over all area of door 52 sqm 401.4 20872.80
shutter to be measured).
Providing and fixing bright finished brass door latch with necessary
26 9.75.2 60 each 259.8 15588.00
screws etc. complete : 250x16x5 mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
27 9.100.2 48 each 53.25 2556.00
to required colour or shade, with necessary screws etc. complete : 100
mm
Providing and fixing aluminium tower bolts, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868 ) transparent
28 9.97.2 24 each 104.4 2505.60
or dyed to required colour or shade, with necessary screws etc.
complete : 250x10 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868 ) transparent
29 9.97.4 24 each 75.55 1813.20
or dyed to required colour or shade, with necessary screws etc.
complete : 150x10 mm
 Providing and fixing aluminium sliding door bolts, ISI marked
anodised (anodic coating not less than grade AC 10 as per IS : 1868),
30 9.96.2 24 each 234.9 5637.60
transparent or dyed to required colour or shade, with nuts and screws
etc. complete : 250x16 mm
Providing and fixing aluminium hanging floor door stopper, ISI
marked, anodised (anodic coating not less than grade AC 10 as per IS :
31 9.101.1 16 each 35.5 568.00
1868) transparent or dyed to required colour and shade, with necessary
screws etc. complete. Single rubber stopper
Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows fixing with butt hinges of required
size with necessary screws, excluding panelling which will be paid for
32 9.5.1.1 48 sqm 3704.45 177813.60
separately, all complete as per direction of Engineer-in-charge. (Note:-
Butt hinges and necessary screws shall be paid separately) Second class
teak wood 35 mm thick shutters
Providing and fixing panelling or panelling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory
windows (Area of opening for panel inserts excluding portion inside
33 9.7.7.1 32 sqm 1897.1 60707.20
grooves or rebates to be measured). Panelling for panelled or panelled
and glazed shutters 25 mm to 40 mm thick : Float glass panes 4 mm
thick glass pane (weight not less than 10 kg per sqm)
Extra for providing frosted glass panes 4 mm thick instead of
ordinaryfloat glass panes 4 mm thick in doors, windows and clerestory
34 9.12 32 sqm 148.5 4752.00
window shutters. (Area of opening for glass panes excluding portion
inside rebate shall be measured).
Providing and fixing M.S. grills of required pattern in frames of
windows etc. with M.S. flats, square or round bars etc. including
35 9.48.2 720 kg 197.7 142344.00
priming coat with approved steel primer all complete. Fixed to
openings /wooden frames with rawl plugs screws etc.
Providing and fixing wire gauge shutters using galvanized M.S. wire
gauge of average width of aperture 1.4 mm in both directions with wire
of dia 0.63 mm, for doors, windows and clerestory windows with
36 9.27.1.1.1 44 sqm 4342.3 191061.20
hinges and necessary screws : 35 mm thick shutters with ISI marked
M.S. pressed butt hinges bright finished of required size Second class
teak wood
Providing and fixing specified wood frame work consisting of battens
50x25mm fixed with rawl plug and drilling necessary holes for rawl
37 8.27.1 0.06 cum 163814.1 9828.85
plug etc. including priming coat complete Kiln seasoned and
chemically treated hollock wood
Providing and fixing cup board shutters 25 mm thick, with Pre-
laminated flat pressed three layer particle board or graded wood
particle board IS: 12823 marked, exterior grade (Grade l Type ll),
38 9.129 having one side decorative lamination and other side balancing 48 sqm 1982.7 95169.60
lamination, including IInd class teak wood lipping of 25 mm wide x12
mm thick with necessary screws and bright finished stainless steel
piano hinges, complete as per direction of the Engineer-in-Charge
Providing and fixing factory made shutters of Pre-laminated particle
board flat pressed three layer or graded wood particle board with one
side decorative finish and other side balancing lamination conforming
to IS: 12823 Grade l Type ll, of approved design, and edges sealed with
water resistant paint and lipped with aluminium 'U' type edge beading
39 9.131.1 32 sqm 1559.05 49889.60
all- round the shutter, including fixing with angle cleat, grip strip,
cadmium plated steel screws, including fixing of aluminium hinges
100x63x4 mm etc. complete as per architectural drawing and direction
of Engineer-in- Charge (Cost of 'U' beading and hinges will be paid for
separately). 25 mm thick
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer
board ISI marked IS : 14842, including top cover of 6 mm coir veneer
board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod
40 9.43 with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 96 metre 626.55 60148.80
10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x
40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm
long etc. all complete.
 Providing and fixing stainless steel ( Grade 304) railing made of
Hollow tubes, channels, plates etc., including welding, grinding,
buffing, polishing and making curvature (wherever required) and
fitting the same with necessary stainless steel nuts and bolts complete,
i/c fixing the railing with necessary accessories & stainless steel dash
41 10.28 fasteners , stainless steel bolts etc., of required size, on the top of the 50 kg 612.25 30612.50
floor or the side of waist slab with suitable arrangement as per approval
of Engineer-in- charge, (for payment purpose only weight of stainless
steel members shall be considered excluding fixing accessories such as
nuts, bolts, fasteners etc.).
Structural steel work in single section, fixed with or without
42 10.1 connecting plate, including cutting, hoisting, fixing in position and 4500 kg 93.05 418725.00
applying a priming coat of approved steel primer all complete.
Providing corrugated G.S. sheet roofing including vertical / curved
surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm
diameter with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead, including a coat of approved steel
43 12.1.1 primer and two coats of approved paint on overlapping of sheets 210 sqm 1135.45 238444.50
complete (up to any pitch in horizontal/ vertical or curved surfaces),
excluding the cost of purlins, rafters and trusses and including cutting
to size and shape wherever required. 0.80 mm thick with zinc coating
not less than 275 gm/m²
Providing and fixing in position collapsible steel shutters with vertical
channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm
44 10.3 size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia 10 sqm 9397.35 93973.50
steel pulleys, complete with bolts, nuts, locking arrangement, stoppers
handles, including applying a priming coat of approved steel primer.,
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality
conforming to IS : 15622 of approved make in colours such as White,
45 11.37 Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 44 sqm 935.6 41166.40
(1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3
kg/sqm including pointing the joints with white cement and matching
pigment etc., complete.
Providing and laying vitrified floor tiles in different sizes (thickness to
be specified by the manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved make, in all colours
46 11.41.1 and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse 180 sqm 1334.35 240183.00
sand), jointing with grey cement slurry @ 3.3 kg/ sqm including
grouting the joints with white cement and matching pigments etc.,
complete. Size of Tile 500x500 mm
Providing and fixing Ist quality ceramic glazed wall tiles conforming
to IS: 15622 (thickness to be specified by the manufacturer), of
approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer-in-Charge, in skirting, risers
47 8.31 150 sqm 1063.45 159517.50
of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg
per sqm, including pointing in white cement mixed with pigment of
matching shade complete
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base cement
48 8.2.2.1 mortar 1:4 (1 cement : 4 coarse sand), joints treated with white 10 sqm 4679.35 46793.50
cement,mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss
finish etc. complete at all levels. Granite of any colour and shade
Area of slab upto 0.50 sqm
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base cement
49 8.2.2.2 mortar 1:4 (1 cement : 4 coarse sand), joints treated with white 10 sqm 4425.35 44253.50
cement,mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss
finish etc. complete at all levels. Granite of any colour and shade
Area of slab over 0.50 sqm
 Providing edge moulding to 18 mm thick marble stone counters,
Vanitiesetc., including machine polishing to edge to give high gloss
50 8.3.2 20 metre 418.85 8377.00
finish etc complete as per design approved by Engineer-in-Charge.
Granite work
Kota stone slab flooring over 20 mm (average) thick base laid over and
jointed with grey cement slurry mixed with pigment to match the shade
51 11.26.1 60 sqm 1706.6 102396.00
of the slab, including rubbing and polishing complete with base of
cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3
52 11.27 coarse sand) and jointed with grey cement slurry mixed with pigment 12 sqm 2038.55 24462.60
to match the shade of the slabs, including rubbing and polishing
complete.
Extra for pre finished nosing in treads of steps of Kota stone/ sand
53 11.31 120 metre 157.35 18882.00
stone slab.
Extra for Kota stone/ sand stone in treads of steps and risers using
54 11.32 12 sqm 36.35 436.20
single length up to 1.05 metre.
55 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) 2000 sqm 282.00 564000.00
56 13.16.1 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) 320 sqm 253.05 80976.00
Providing and applying plaster of paris putty of 2 mm thickness over
57 13.26 1020 sqm 214.30 218586.00
plastered surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade : New work (two or more
58 13.41.1 1340 sqm 162.55 217817.00
coats) over and including water thinnable priming coat with cement
primer
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade: New work (Two or more coats
59 13.47.1 980 sqm 162.35 159103.00
applied @ 1.43 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
Polishing on wood work with ready mixed wax polish of approved
60 240 sqm 164.15 39396.00
13.69 brand and manufacture :13.69.1 New work
Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications : Painting
61 13.48.3 Steel work with Deluxe Multi Surface Paint to give an even shade. 48 sqm 140.05 6722.40
Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of
primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
Providing and laying water proofing treatment on roofs of slabs
by applying cement slurry mixed with water proofing cement
compound consisting of applying: (a) after surface preparation, first
layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still
green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @
62 22.6 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 256 sqm 585.55 149900.80
kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air
cure for 4 hours followed by water curing for 48 hours. The entire
treatment will be taken upto 30 cm on parapet wall and tucked into
groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which
will be paid for separately.
(For the purpose of measurement the entire treated surface will be
measured.)
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen and the like
consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm
mixed with water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.(ii) IInd course of 20 mm cement
63 22.3 plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing 40 sqm 774.25 30970.00
compound in recommended proportion including rounding off junction
of vertical and horizontal surface.(iii) IIIrd course of applying blown
or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth
course of 400 micron thick PVC sheet. (Overlaps at joints of PVC
sheet should be 100 mm wide and pasted to each other with bitumen
@ 1.7 kg/sqm).
 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as
per IS:13983 with C.I. brackets and stainless steel plug 40 mm,
64 17.10.1 including painting of fittings and brackets, cutting and making good 4 each 6008.45 24033.80
the walls wherever required : Kitchen sink with drain board
510x1040 mm bowl depth 250 mm
Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
65 17.1.1 device (handle lever) conforming to IS : 7231, with all fittings and 4 each 5781.35 23125.40
fixtures complete, including cutting and making good the walls and
floors wherever required: White Vitreous china Orissa pattern W.C.
pan of size 580x440 mm with integral type foot rests
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
66 17.7.1 painting of fittings and brackets, cutting and making good the walls 4 each 2275.00 9100.00
wherever require: White Vitreous China Wash basin size 630x450 mm
with a pair of 15 mm C.P. brass pillar taps
Providing and fixing C.P. brass bib cock of approved quality
67 18.49.1 12 each 434.20 5210.40
conforming to IS:8931 : 15 mm nominal bore
17.22B(a Providing and fixing CP Brass Single lever telephonic wall mixer of
68 quality & make as approved by Engineer in charge.15 mm nominal dia 4 each 6119.15 24476.60
)
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
69 17.73.1 arrangement of approved quality and colour. 450 mm long towel 4 each 573.60 2294.40
rail with total length of 495 mm, 78 mm wide and effective height
of 88 mm, weighing not less than 170 gms
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
70 17.31 4 each 1411.15 5644.60
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
Providing and fixing PTMT soap Dish Holder having length of
71 18.65 138mm, breadth 102mm, height of 75mm with concealed fitting 8 each 96.75 774.00
arrangements, weighing not less than 106 gms.
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, IS : 12701 marked, with cover and suitable locking
72 18.48 4000 per litre 9.70 38800.00
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank.
Providing and fixing ball valve (brass) of approved quality, High or low
73 18.18.3 8 each 399.15 3193.20
pressure, with plastic floats complete : 25 mm nominal bore
Providing and fixing trap of self cleansing design with screwed down
or hinged grating with or without vent arm complete, including cost of
74 17.60.1.1 12 each 1604.10 19249.20
cutting and making good the walls and floors : 100 mm inlet and 100
mm outlet Sand cast iron S&S as per IS: 3989
Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast
75 17.35.1.1 20 metre 1018.05 20361.00
iron S&S pipe as per IS: 1729
Providing and fixing bend of required degree with access door,
76 17.38.1.1 insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm 12 each 530.70 6368.40
dia Sand cast iron S&S as per IS - 1729
Providing and fixing soil, waste and vent pipes : 75 mm diameter :
77 17.35.2.1 20 metre 931.55 18631.00
Sand cast iron S&S pipe as per IS: 1729
Providing and fixing square-mouth S.W. gully trap class SP-1 complete
with C.I. grating brick masonry chamber with water tight C.I. cover
with frame of 300 x300 mm size (inside) the weight of cover to be not
78 19.4.1.1 8 each 2,453.55 19628.40
less than 4.50 kg and frame to be not less than 2.70 kg as per standard
design: 100x100 mm size P type With common burnt clay F.P.S.
(non modular) bricks of class designation 7.5
Providing and fixing trap of self cleansing design with screwed downor
hinged grating with or without vent arm complete, including cost of
79 17.60.2.2 8 each 1296.40 10371.20
cutting and making good the walls and floors :100 mm inlet and 75 mm
outlet Sand Cast Iron S&S as per IS- 1729
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
80 18.10.2 i/c cutting and making good the walls etc.Internal work - Exposed on 60 metre 373.35 22401.00
wall 20 mm dia nominal bore
Providing and fixing G.I. Pipes complete with G.I. fittings and
clamps,i/c making good the walls etc. concealed pipe, including
81 18.11.2 40 metre 541.1 21644.00
painting with anti corrosive bitumastic paint, cutting chases and
making good the wall : 20 mm dia nominal bore
 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
82 18.10.3 i/c cutting and making good the walls etc. Internal work - Exposed on 80 metre 491.20 39296.00
wall 25 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
83 18.10.5 i/c cutting and making good the walls etc. Internal work - Exposed on 40 metre 725.15 29006.00
wall 40 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings including
84 18.12.5 100 metre 558.35 55835.00
trenching and refilling etc. External work 40 mm dia nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved
85 18.17.1 16 each 532.35 8517.60
quality (screwed end) : 25 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved
86 18.17.3 2 each 589.90 1179.80
quality (screwed end) : 40 mm nominal bore
Providing and fixing G.I. Union in G.I. pipe including cutting and
87 18.46.3 threading the pipe and making long screws etc. complete (New work) : 16 each 369.35 5909.60
25 mm nominal bore
Providing and fixing G.I. Union in G.I. pipe including cutting and
88 18.46.5 threading the pipe and making long screws etc. complete (New work) : 2 each 523.20 1046.40
40 mm nominal bore
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal
89 12.41.2 60 metre 319.75 19185.00
ring conforming to IS : 5382, leaving 10 mm gap for thermal
expansion, (i) Single socketed pipes. 110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded
fittings/ accessories for unplasticised Rigid PVC rain water pipes
90 12.42.5.2 conforming to IS : 13592 Type A, including jointing with seal ring 16 each 132 2112.00
conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Bend 87.5° 110 mm bend
Providing and fixing on wall face unplasticised - PVC moulded
fittings/ accessories for unplasticised Rigid PVC rain water pipes
91 12.42.6.2 conforming to IS : 13592 Type A, including jointing with seal ring 16 each 115.95 1855.20
conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Shoe (Plain) 110 mm Shoe
Providing and fixing unplasticised -PVC pipe clips of approved design
to unplasticised - PVC rain water pipes by means of 50x50x50 mm
92 12.43.2 hard wood plugs, screwed with M.S. screws of required length, 40 each 309.5 12380.00
including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete. 110 mm
Constructing brick masonry chamber for underground C.I. inspection
chamber and bends with bricks in cement mortar 1:4 (1 cement : 4
coarse sand) C.I. cover with frame (light duty) 455x610 mm internal
dimensions, total weight of cover with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab
with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate
93 19.30.1.1 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine 6 each 6,431.30 38587.80
sand : 10 graded stone aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse
sand), finished smooth with a floating coat of neat cement on walls and
bed concrete etc. complete as per standard design: Inside dimensions
455x610 mm and 45 cm deep for single pipe line : With common
burnt clay F.P.S. (non modular) bricks of class designation 7.5
Constructing brick masonry circular type manhole 0.91 m internal
dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement
: 4 coarse sand), inside cement plaster 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat
cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6
graded stone aggregate 40 mm nominal size), and making necessary
channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) finished with a floating coat of
94 19.9.1.1 neat cement, all complete as per standard design : 0.91 m deep with 3 each 11,886.45 35659.35
S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560
mm internal diameter con- forming to I.S. 12592, total weight of cover
and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including centering, shuttering all complete. (Excavation, foot rests and
12mm thick cement plaster at the external surface shall be paid for
separately) : With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
 Steel reinforcement for R.C.C. work including straightening,
95 5.22.6 cutting,bending, placing in position and binding all complete upto 12540 Kg 89.65 1124211.00
plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or
more.
Steel reinforcement for R.C.C. work including straightening, cutting,
96 5.22A.6 bending, placing in position and binding all complete above plinth 9900 Kg 89.65 887535.00
level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
-21% over DSR items 12100546.48 -2541114.76
Preparation of Site plan, GAD and designing foundation and other
structural design, preparation of detailed structural drawing and
submission of design calculation with check print for verification and
corrections, carrying out correction as per corrected check print and
submission of 4 copies of drawing with negative and floppy etc., as per
97 NS-12 140 sqm 120 16800
general arrangement drawing and submission of completion drawing as
per the execution in tracing paper/tracing film after completion of work
duly incorporating any deviation/changes carried out during execution
from original approved drawing without completion drawing final bill
will not be finalized.
98 NS-13 Conducting Soil Investigation from recognized Government Institution 2 Each 10000 20000
total 9596231.72
Contingency @ 1% 95962.31717
Grand total 9692194.03

Sr.DEN/West/UBL