PHILIPPINE FIRE PROTECTION CODE

1. In Division 10 Day care occupancies under illumination of means of egress, which of the following areas
are needed to have emergency lightings?
Answer: C
a. Comfort rooms, sleeping areas, entrances, and storage rooms.
b. Parking, hallways, rooftops, assembly use spaces, and stairs.
c. Interior stairs and corridors, assembly use spaces, flexible and open-plan buildings, interior or
limited access portions of buildings, and shops and laboratories.
d. None of the above.

2. According to Division 15 of Chapter 2, which of the following are considered as Mercantile occupancies?
Answer: A
a. Stores, markets, and spaces for the display and sale of merchandise.
b. Hotels, apartments, lodging, and dormitories.
c. Buildings where business transactions take place.
d. A place where merchants hangout.

3. In accordance with section 10.2.19.1 or Aerodrome facilities, what is the purpose of bonding and
grounding?
Answer: A

a. To prevent the accumulation of static electricity between the refueling vehicle (or equipment) and
the aircraft or fuel storage tanks.

b. To prevent the accumulation of smoke between the refueling vehicle (or equipment) and the
aircraft or fuel storage tanks.

c. To prevent the accumulation of dynamic electricity between the refueling vehicle (or equipment)
and the aircraft or fuel storage tanks.

d. To stop the process of refueling.

4. In accordance with section 10.2.19.6 or Motion picture and television production, studio sound stages
and approved production facilities, is it allowed to turn the fire alarm system off during filming?
Answer: B
a. No, it is prohibited to turn the fire alarm system off due to the danger of not having it.
b. Yes, as long as it is done with relevant permissions from the authorities, they should have
immediate contact with the fire department and a clear indicator that the fire alarm system is off.
c. Maybe, potential faults in fire alarm systems can disrupt the filming process, therefore it should be
turned off.
d. None of the above.

5. What is the minimum qualification requirement for a Chief of the Fire Safety Enforcement Section/Unit
(FSES/U) in the BFP, as per Section 8.1.1.3?
Answer: C
 a. Must have a baccalaureate degree with at least five (5) years of service in the BFP.
b. Should be a licensed engineer or architect with at least one (1) year in the BFP service.
c. Must be a licensed engineer or architect with at least three (3) years in the BFP service.
d. Any personnel with lower rank who is a licensed engineer or architect, or a graduate of any
baccalaureate degree with at least five (5) years of service in the BFP.

6. What are the minimum qualification requirements for a Uniformed Personnel appointed as a Fire Safety
Inspector, according to Section 8.1.1.1 of the BFP regulations?
Answer: D
a. Must be a licensed Engineer (Civil, Electrical, Mechanical, Chemical, Sanitary, and Electronics) with
at least one (1) year in the BFP service.
b. Should be a licensed Architect with at least one (1) year in the BFP service.
c. Must be a graduate of any baccalaureate degree course with at least three (3) years in the BFP
service.
d. All of the above.

7. When it comes to electrical equipment in the context of cryogenic containers, which standards are
mentioned for conformity?
Answer: B
a. NFPA 55 and PEC
b. NFPA 77 and PEC
c. NFPA 59A and NFPA 99
d. NFPA 430 and NFPA 432

8. In the section about flammable and combustible liquids (SECTION 10.3.7.5), what color should cabinets
be painted, and what should be labeled on them?
Answer: B
a. Painted in blue with "Dangerous Chemicals"
b. Painted in red with "Flammable Liquids"
c. Painted in green with "Caution"
d. Painted in yellow with "Non-Flammable"

9. What is the purpose of "Chapter 5. Miscellaneous Safety Measures"?

10. Why is understanding safety precautions in the field of electrical engineering important?
Answer: C
a. For higher tuition fees
b. To maintain cleanliness in the classroom
c. For the safe operation of electrical equipment and prevention of accidents
d. It is not important
11. What could be the effect of not following safety regulations?
Answer: B
a. Higher grades in the subject
b. Danger to life and property
c. Easy progression in the course
d. Higher income after graduation

12. How can safety be maintained in "Chapter 5"?

13. A place where hot works and the handling and storage of fuels and fluids, tires, plastics, combustibles,
and hazardous materials.
Answer: C
a. Oil Burning Equipment
b. Mechanical Refrigeration
c. Automobile Wrecking Yards
d. Repair Garages

14. No person shall engage in fumigation or thermal insecticidal fogging without an FSC from the C/MFM
having jurisdiction.
Answer: B
a. FireWorks and Pyrotechnics
b. Repair Garages
c. Manufacture of Organic Coatings
d. Industrial Ovens and Furnaces

15. An FSC from the C/MFM having jurisdiction shall be issued for spraying and dipping operations utilizing
flammable liquid, and powders included within the scope of this RIRR.
Answer: D
a. Fumigation and Insecticidal Fogging
b. Manufacture of Organic Coatings
c. Ripening Processes
d. Spraying, Dipping, Coating Using Flammable or Combustible Materials and Liquids

16. Every equipment, except those portable types, shall be kept securely fastened to a stable surface.
Answer: A
a. Motion Picture Projection
b. Mechanical Refrigeration
c. Dust Producing Machines
 d. Industrial Ovens and Furnaces

17. What system is activated by the presence of fire?

18. What type of designation is an electrically powered unit that has its electric motors and all other electric
equipment completely enclosed?
Answer: A

a. Type Designation EE
b. Type Designation ES
c. Type Designation EX
d. Type Designation E

19. Every sign shall be suitably illuminated by a reliable light source giving a value of not less than?
Answer: A
a. five thousandths (0.005) lumens
b. four thousandths (0.004) lumens
c. eight thousandths (0.008) lumens
d. seven thousandths (0.007) lumens

20. Which of the following does this RIRR cover?

a. Only land transportation vehicles and equipment