Cubdmihc10qcaxtkliebherr LR 1130 Hydraulic Lift Crawler Crane Network
Cubdmihc10qcaxtkliebherr LR 1130 Hydraulic Lift Crawler Crane Network
Ñ
Dimensions
Basic machine with undercarriage
Ñ
Ñ
ÑÑ
Ñ
Total weight appr. 322,100 lbs 3. The weight of the lifting device (hoisting ropes, hook block, shackle etc.)
must be deducted from the gross lifting capacity to obtain a net lifting
value.
Ground pressure 4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must
be deducted to get the net lifting capacity.
Ground bearing pressure 15.4 psi
5. For max. wind speed please refer to lift chart in operator’s cab or manual.
6. Working radii are measured from centre of swing and under load.
Equipment
7. The lifting capacities are valid for 360 degrees of swing.
Main boom (No. 2017.xx) max. length 262 ft
High reach (No. 2017.xx and 1309.xx) 305 ft 8. Calculation of stability under load is based on 75% tipping load,
Luffing jib (No. 1309.xx) max. length 258 ft ANSI B 30.5 and ISO 4305 Table 2.
Max. combination boom 154 ft and luffing jib 258 ft
Fixed jib (No. 0806.xx) 36 ft – 105 ft 9. The structures are calculated according to F.E.M. 1.001 – 1998
Auxiliary jib 53,000 lbs lifting capacity (optional 79,400 lbs) (EN 13001–2 / 2004) and tested according to SAE J 987.
2 LR 1130
Transport dimensions and weights
Basic machine and boom (No.2017.xx)
Ñ
Basic machine
Ñ
with A–frame, 2x 26,500 lbs crane winches and boom foot, without hoisting
ropes, basic counterweight and crawlers
Width 9’10”
Weight in lbs 73,650
Ñ
Crawler 2x
Flat track shoes (option 47.2”) 39.4”
Width 55.1”
Weight in lbs 35,300
Ñ Boom section
Width
Weight in lbs*
(No. 2017.21) 10 ft
6’11”
1,450
Ñ
Transport option
Boom - luffing jib transport option
40 ft boom – and 38 ft jib extension
20 ft boom – and 20 ft jib extension
(No. 2017.xx/1309.xx) 20 ft/20 ft 40 ft/38 ft
Width 20’1” 40’
Weigh in lbs* 3,450 6,300
*) Including pendant straps
LR 1130 3
Transport dimensions and weights
Luffing jib (No. 1309.xx)
Ñ
Width 45”
Weight in lbs* 985
4 LR 1130
Transport dimensions and weights
Counterweights
Counterweight 1x
Width 65.4”
Weight in lbs 31,970
Counterweight 1x
Width 65.4”
Weight in lbs 35,935
Counterweight 4x
Width 53.5”
Weight in lbs 11,245
Carbody counterweight 2x
Width 57.1”
Weight in lbs 22,050
Ñ Width 28”
ÑÑ
Weight in lbs 600
Hooks
Ñ
352,750 lbs hook block - 7 sheaves
Width 25.2” 30” 34.6”
Weight in lbs 3,310 4,960 6,615
Ñ
220,500 lbs hook block - 5 sheaves
Width 21.3” 26.4 30.3”
Weight in lbs 2,870 3,970 5,070
Ñ
176,400 lbs hook block - 3 sheaves
Width 14.2 18.1 22”
Weight in lbs 2,200 3,310 4,410
LR 1130 5
Technical description
Swing
Consists of rollerbearing with external teeth, swing drive with fixed axial
piston hydraulic motor, spring loaded and hydraulically released multi–disc
holding brake, planetary gearbox and pinion. Noise emission
Both swing modes are possible – speed control or free swing.
A multi–disc holding brake acts automatically at zero swing motion. Noise emissions correspond with 2000/14/EC directive on noise emission by
Swing speed from 0 – 3 rpm continuously variable. equipment used outdoors.
6 LR 1130
Boom combinations
Ñ
5.5 m (18 ft)
No. 0806.16
5.5 m (18 ft) 11.7 m (38 ft)
No. 1309.22 6.0 m (20 ft) No. 1309.20
No. 0806.15
Mid fall 0.35 m (1.1 ft)
6.0 m (20 ft) No. 1309.32
11.7 m (38 ft) No. 0806.15
No. 1309.20
Ñ
No. 0806.15
11.7 m (38 ft)
Ñ
No. 1309.20 5.5 m (18 ft)
No. 0806.16 11.7 m (38 ft)
Ñ
12.0 m (40 ft) No. 1309.20
No. 2017.21
Ñ Ñ
No. 2017.21 No. 1309.22
Tapered 12.0 m (40 ft)
Ñ
No. 2017/1309.22
10.0 m (33 ft)
12.0 m (40 ft) No. 2017.21
No. 2017.21
ÑÑ
12.0 m (40 ft)
No. 2017.21
Ñ
12.0 m (40 ft)
No. 2017.21
Ñ
12.0 m (40 ft)
No. 2017.21
Ñ
12.0 m (40 ft)
No. 2017.21
12.0 m (40 ft)
ÑÑ
Ñ
No. 2017.21
12.0 m (40 ft)
Ñ
No. 2017.21
12.0 m (40 ft)
ÑÑ
Ñ Ñ
No. 2017.21
12.0 m (40 ft)
Ñ
No. 2017.21
6.0 m (20 ft) 12.0 m (40 ft)
Ñ ÑÑ Ñ
No. 2017.21 No. 2017.21
6.0 m (20 ft)
3.0 m (10 ft) 3.0 m (10 ft) No. 2017.21
Ñ Ñ
No. 2017.21 No. 2017.21
Ñ Ñ Ñ Ñ
7.0 m (23 ft) 7.0 m (23 ft) 7.0 m (23 ft) 7.0 m (23 ft)
No. 2017.24 No. 2017.24 No. 2017.24 No. 2017.24
LR 1130 7
Self assembly system
Ñ Ñ
Ñ Ñ
Ñ
Unloading of basic machine
Ñ Ñ
ÑÑ Ñ Ñ Ñ
Ñ Ñ
Ñ Ñ
Unloading and assembly of crawlers
Ñ Ñ Ñ Ñ
Ñ Ñ Ñ Ñ
Ñ Ñ
Unloading and assembly of carbody counterweight Unloading and assembly of boom
Ñ Ñ Ñ
Ñ ÑÑ Ñ ÑÑ ÑÑÑÑ
Ñ
Unloading and assembly of counterweight
Ñ ÑÑ Ñ
Ñ Ñ
Ñ ÑÑÑ
Assembly of boom
Ñ Ñ
8 LR 1130
Erecting of main boom to working position
Ñ
Ñ Ñ Ñ
Ñ Ñ Ñ
Reeving of hoist and jib ropes
ÑÑ
Ñ
Ñ
Ñ
ÑÑ Ñ
Ñ Ñ Ñ
Erecting of main boom and luffing jib
Ñ Ñ Working position
LR 1130 9
Working range - main boom (No. 2017.xx) 86° - 15°
max. 112,215 lbs counterweight and 44.100 lbs carbody counterweight
Ñ
79”
Ñ
ÑÑ
of the auxiliary jib is
53,000 lbs.
The corresponding load
chart is programmed in the
LMI system.
Ñ
ÑÑ
Ñ
Ñ
ÑÑ
Ñ
ÑÑ
Ñ
10 LR 1130
Lift chart for main boom (No. 2017.xx)
Capacities in 1000 lbs for boom lengths from (56 ft – 262 ft) – with 26,500 lbs winches
counterweight 112,200 lbs and carbody counterweight 44,100 lbs
Boom length in (ft)
Radius 56 66 85 105 125 144 164 184 203 223 243 262 Radius
(ft) lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs (ft)
12 302.5 12
15 281.5 289.5 247.4 207.1 15
20 210.7 220.7 207.6 188.7 162.4 140.4 119.8 20
25 169.9 174.2 168.3 164.9 147.0 128.2 113.6 98.2 83.6 68.5 57.2 25
30 147.6 141.1 142.1 140.6 135.7 117.5 107.3 95.1 80.8 66.9 56.6 46.3 30
35 120.8 123.5 120.1 118.4 116.6 109.8 99.4 91.7 77.6 65.4 55.2 45.2 35
40 102.4 100.4 102.0 99.9 99.2 95.2 94.8 89.2 75.3 63.2 53.8 44.3 40
45 87.1 87.2 87.1 87.0 86.7 86.3 85.6 83.9 73.6 61.3 50.7 42.6 45
50 75.5 75.7 75.6 75.4 74.2 74.8 73.2 71.1 69.3 60.0 49.5 41.1 50
55 66.4 66.6 66.6 66.4 66.0 65.7 65.2 64.8 64.1 56.9 48.5 40.0 55
65 53.2 53.3 53.2 51.6 52.3 50.9 50.8 50.9 49.6 45.1 37.2 65
70 48.2 48.1 47.7 47.3 46.8 46.4 45.9 45.4 43.8 35.8 70
80 40.2 40.2 39.8 39.4 38.9 38.4 37.9 37.4 36.9 33.5 80
85 36.9 37.0 36.6 36.2 35.7 35.2 34.7 34.2 33.6 32.6 85
90 34.2 33.8 33.4 32.9 32.5 31.9 31.4 30.8 30.3 90
100 29.4 29.1 28.8 28.3 27.8 27.2 26.7 26.3 24.7 100
110 25.5 25.2 24.7 24.2 23.7 23.1 22.6 22.0 110
120 22.4 22.1 21.6 21.1 20.6 20.0 19.5 18.9 120
130 19.5 19.0 18.5 18.0 17.4 16.9 16.3 130
140 17.3 16.8 16.3 15.8 15.3 14.7 14.1 140
150 14.9 14.4 13.9 13.4 12.8 12.2 150
160 13.2 12.8 12.2 11.7 11.1 10.6 160
170 11.3 10.8 10.3 9.7 9.1 170
180 10.0 9.5 9.0 8.4 7.8 180
190 8.3 7.9 7.3 6.7 190
200 7.3 6.8 6.2 5.7 200
210 5.9 5.3 4.8 210
215 5.4 4.9 4.3 215
220 4.5 3.9 220
230 3.7 3.1 230
235 3.3 2.8 235
240 2.4 240
245 2.1 245
Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator’s cab or manual.
LR 1130 11
L - boom high reach (No. 2017 / 1309.xx) 198 ft - 305 ft
Working range 86° - 15°
Ñ
Ñ
Ñ
ÑÑ
Ñ
Ñ
L - boom configuration with 131 ft main boom (No. 2017.xx / No. 1309.xx)
Configuration for L – boom lengths (198 ft – 304 ft)
Length Amount of boom and luffing jib extensions
Boom foot 23 ft 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 10 ft* 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 20 ft* 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 40 ft* 2 2 2 2 2 2 2 2 2 2 2 2
Tapered 40 ft* 1 1 1 1 1 1 1 1 1 1 1 1
Luffing insert 10 ft* 1 1 1 1 1 1
Luffing insert 20 ft* 1 1 1 1 1 1
Luffing insert 38 ft* 1 1 1 1 2 2 2 2 3
Luffing jib head 18 ft 1 1 1 1 1 1 1 1 1 1 1 1
Max. L – boom length (ft) 198 208 218 227 237 247 257 265 275 285 295 304
*Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 11.7 m, 12 m). The figures shown above are approximate conversions to feet.
12 LR 1130
Lift chart for L - boom (No. 2017 / 1309.xx)
Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator’s cab or manual.
L - boom configuration with 171 ft main boom (No. 2017.xx / No. 1309.xx)
Configuration for L – boom lengths (238 ft – 305 ft)
Above lift chart is forLength Amount
reference only. For actual lift duty please refer to lift of operator’s
chart in boom and cab
luffing
or jib extensions
manual.
Boom foot 23 ft 1 1 1 1 1 1 1 1
Boom insert 10 ft* 1 1 1 1 1 1 1 1
Boom insert 20 ft* 1 1 1 1 1 1 1 1
Boom insert 40 ft* 3 3 3 3 3 3 3 3
Tapered 40 ft* 1 1 1 1 1 1 1 1
Luffing insert 10 ft* 1 1 1 1
Luffing insert 20 ft* 1 1 1 1
Luffing insert 38 ft* 1 1 1 1 2
Luffing jib head 18 ft 1 1 1 1 1 1 1 1
Max. L – boom length (ft) 238 248 258 266 276 286 296 305
*Actual lengths of boom sections are metric (e.g. 3 m. 6 m. 11.7 m, 12 m). The figures shown above are approximate conversions to feet.
LR 1130 13
Working range - luffing jib (No. 1309.xx) 78° - 15°
Main boom 88° - 45°
Ñ
Ñ
Ñ
Ñ
Boom configuration for main boom lengths (75 ft - 174 ft) – see table 1 on page 10
Jib configuration for jib lengths (74 ft - 258 ft) (No. 1309.xx)
Length Amount of luffing jib extensions
Luffing jib foot 18 ft 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 10 ft* 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 20 ft* 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 38 ft* 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5
Luffing jib head 18 ft 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib length (ft) 74 84 94 104 113 123 133 142 151 161 171 181 190 200 209 219 228 238 248 258
*Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 11.7 m). The figures shown above are approximate conversions to feet.
14 LR 1130
Lift chart - tower crane (No. 1309.xx)
Main boom angle 88°
LR 1130 15
Lift chart - luffing jib (No. 1309.xx)
Main boom angle 83°
16 LR 1130
Lift chart - luffing jib (No. 1309.xx)
Main boom angle 75°
LR 1130 17
Lift chart - luffing jib (No. 1309.xx)
Main boom angle 65°
Capacities in 1000 lbs with luffing jib (No. 1309.xx) 112,200 lbs counterweight + 44,100 lbs carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
18 LR 1130
Lift chart - luffing jib (No. 1309.xx)
Main boom angle 45°
Capacities in 1000 lbs with luffing jib (No. 1309.xx) 112,200 lbs counterweight + 44,100 lbs carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
LR 1130 19
Working range - fixed jib (No. 0806.xx) 15° and 30°
Main boom 88°- 30°
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Boom configuration for boom lengths (56 ft - 233 ft) – see table 1 on page 10
Fixed jib configuration for fixed jib lengths (36 ft - 105 ft) (No. 0806.xx)
Length Amount of fixed jib extensions
Fixed jib foot 18 ft 1 1 1 1 1 1 1 1
Fixed jib insert 10 ft* 1 1 1 1
Fixed jib insert 20 ft* 1 1 2 2 3 3
Fixed jib head 18 ft 1 1 1 1 1 1 1 1
Fixed jib length (ft) 36 46 56 66 76 85 95 105
*Actual lengths of boom sections are metric (e.g. 3 m, 6 m). The figures shown above are approximate conversions to feet.
20 LR 1130
Lift chart - fixed jib (No. 0806.xx)
Offset 15°
Capacities in 1000 lbs with fixed jib (No. 0806.xx) 112,200 lbs counterweight + 44,100 lbs carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
LR 1130 21
Lift chart - fixed jib (No. 0806.xx)
Offset 30°
Capacities in 1000 lbs with fixed jib (No. 0806.xx) 112,200 lbs counterweight + 44,100 lbs carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
22 LR 1130
Notice
LR 1130 23
LR 1130 – 10020384 –06/2006 Subject to change without notice.