Scribd
Upload
11 views

NWC203c PE23

To determine the smallest possible frame size for continuous transmission between Earth and the Moon over a 2 Mbps HDLC link, the round-trip time

Uploaded by

hayhe2910
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
11 views

NWC203c PE23

To determine the smallest possible frame size for continuous transmission between Earth and the Moon over a 2 Mbps HDLC link, the round-trip time

Uploaded by

hayhe2910
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Q1 :

Connection-oriented acknowledged service is a network communication service that


establishes a dedicated connection between the sender and receiver before any data
transmission takes place. In this service, the receiver sends an acknowledgement to
the sender after receiving each packet of data.
In contrast, connectionless acknowledged service does not establish a dedicated
connection before data transmission. The sender simply sends packets to the
receiver, and the receiver sends acknowledgements back to the sender for each
received packet.
The protocols that provide these services differ in their handling of packet loss and
protocol overhead. Connection-oriented acknowledged service protocols, such as
TCP (Transmission Control Protocol), use a three-way handshake to establish a
reliable connection between the sender and receiver. This protocol also implements
flow control and congestion control mechanisms to ensure efficient data transfer and
minimize packet loss. Once the data transmission is complete, the connection is
terminated.
Connectionless acknowledged service protocols, such as UDP (User Datagram
Protocol), do not establish a dedicated connection with the receiver. Instead, they
simply send the packets to the receiver without guaranteeing their delivery or order.
These protocols have lower overhead and are useful in applications where speed is
more important than accuracy, such as online gaming and live streaming.
In summary, connection-oriented acknowledged service is reliable but has higher
overhead and may be slower, while connectionless acknowledged service is faster
but less reliable and does not guarantee the order of packet delivery.

Q2 :
To determine the smallest possible frame size that allows continuous transmission,
we need to calculate the round-trip time (RTT) for a signal to travel from Earth to the
Moon and back.

RTT = 2 * distance / speed of light

Converting the distance between Earth and the Moon to meters:

375,000 km * 1000 m/km = 375,000,000 meters


Plugging in the values:

RTT = 2 * 375,000,000 / 3 x 10^8


= 5 seconds

To achieve continuous transmission on a 1.5 Mbps link with HDLC, we need to


calculate the minimum frame size that can be transmitted within this RTT.

Minimum frame size = (Link speed * RTT) / Efficiency

The efficiency factor takes into account the protocol overhead, such as header and
trailer bits.

Assuming an efficiency factor of 80%, we get:

Minimum frame size = (2 Mbps * 5 sec) / 0.8


= 12.5 megabits

To convert to bytes:

12.5 megabits / 8 bits/byte = 1.5625 megabytes

Therefore, the smallest possible frame size that allows continuous transmission on a
2 Mbps HDLC link to the Moon is approximately 1.5625 megabytes.

Q3 :
Forwarding table for B1:
MAC Address Port
--------------------
S1 MAC port 2
S2 MAC port 1
S3 MAC port 3
B2 MAC port 4

Forwarding table for B2:


MAC Address Port
--------------------
S4 MAC port 2
S5 MAC port 1
S2 MAC port 3
B1 MAC port 4

When S1 transmits to S5, the frame goes through B1 and B2 before reaching S5. B1
learns S1's MAC address on port 2 and forwards the frame to B2, which learns S5's MAC
address on port 1.
When S3 transmits to S2, the frame goes through B1 before reaching S2. B1 learns S3's
MAC address on port 3 and forwards the frame to B2, which learns S2's MAC address on
port 3.
When S4 transmits to S3, the frame goes through B2 before reaching S3. B2 learns S4's
MAC address on port 2 and forwards the frame to B1, which learns S3's MAC address on
port 3.
When S2 transmits to S1, the frame goes through B2 and B1 before reaching S1. B2
learns S2's MAC address on port 3 and forwards the frame to B1, which learns S1's MAC
address on port 2.
When S5 transmits to S4, the frame goes through B2 and B1 before reaching S4. B2
already knows S5's MAC address on port 1 from the first transmission, so it forwards the
frame to B1, which learns S4's MAC address on port 2.

Q4 :
a. To modify Selective Repeat ARQ so that ACK messages contain a list of the next m
frames that it expects to receive, the protocol needs to be modified as follows:

The sender maintains a sliding window that includes all unacknowledged frames, as in
the standard Selective Repeat ARQ protocol.
When the receiver receives a frame, it checks to see if it is the next expected frame in the
sequence. If it is, the receiver sends an ACK message that contains a list of the next m
frames that it expects to receive.
If there are gaps in the received frames, the receiver sends an ACK message that requests
retransmission of the missing frames. The sender then retransmits the requested frames.
b. The effect of this change on protocol performance depends on the value of m and the
characteristics of the network.

One potential benefit of this modification is improved efficiency, particularly in networks


with high latency or high error rates. By including a list of expected frames in each ACK
message, the receiver can help reduce the number of unnecessary retransmissions. For
example, if the sender knows that the receiver is expecting frames 10-20, it can prioritize
those frames for transmission instead of sending other frames that may not be needed.
However, there are also potential drawbacks to this modification. One concern is
increased overhead due to the larger size of the ACK messages. Depending on the value
of m, the size of each ACK message could be significantly larger than in the standard
protocol, which could impact network performance. Additionally, the more frames that
are included in each ACK message, the greater the risk of errors in the ACK message
itself, which could lead to further retransmissions and delays.

Q5 :

(a) If a packet with an IP address of 135.46.61.31 arrives, the router will forward the
packet to Interface 1. This is because the destination address falls within the range of the
CIDR entry 135.46.60.0/22, which has a longer prefix than the other matching CIDR
entry for the destination address.

(b) If a packet with an IP address of 135.46.57.63 arrives, the router will forward the
packet to Interface 0. This is because the destination address falls within the range of the
CIDR entry 135.46.56.0/22, which has a longer prefix than the other matching CIDR
entry for the destination address.

In general, when a packet arrives at a router, the router looks up the destination IP
address in its routing table to determine where to forward the packet. The router selects
the route with the longest matching prefix (i.e., the most specific entry), known as the
"most-specific match," to determine the next hop for the packet. If there are multiple
matching entries with the same prefix length, the router uses the entry with the lowest
administrative distance, which is a value assigned by the router to indicate how
trustworthy the route is. If no matching routes are found in the routing table, the router
forwards the packet to the default route, which is typically the gateway to an external
network such as the internet.

You might also like