Class 12 Interference
Class 12 Interference
a) 𝑦 = 𝑦 + 𝑦
The superposition principle holds goods for Mechanical waves as well as Electromagnetic waves
(or light waves).
Types of Interference of light:
(I) Constructive Interference
1
→ When crest of one wave falls on
crest of other wave (or trough of one
wave falls on trough of other wave)
constructive interference is said to be
taken place due to superposition.
→𝑦 =𝑦 +𝑦
→ Amplitude is maximum
→ Intensity maximum
→ path difference = 𝑛𝜆
Intensity minimum
(odd)
2
→ Young, in 1801, demonstrated the interference of light by a simple experiment with double
slits, then alternate bright and dark bands appear on the screen.
Let us consider S be the monochromatic source of light. Let 𝑆 𝑎𝑛𝑑 𝑆 be the two coherent
sources separated by a small distance 'd' which are kept at a distance 'D' from the screen XY.
Point 'M' lies midway between 𝑆 𝑎𝑛𝑑 𝑆 and MO is the normal from M into the screen. The point
'O' is at equidistant from 𝑆 𝑎𝑛𝑑 𝑆 . Since the wave from 𝑆 𝑎𝑛𝑑 𝑆 arrives at O in the same phase
and path difference between two waves is zero, the point 'O' will be the centre of a bright fringe.
Let P be any point at distance Xn from 'O' on the screen can be calculated by finding path
difference.
Here, 𝑆 𝑁 ⊥ on 𝑆 𝑃
Path difference between 𝑆 𝑎𝑛𝑑 𝑆 at P = 𝑆 𝑃 − 𝑆 𝑃 = 𝑆 𝑁
Also, ∠𝑆 𝑆 𝑁 = 𝜃 = ∠𝑃𝑀𝑂 (∴ 𝑠𝑚𝑎𝑙𝑙 𝑎𝑛𝑔𝑙𝑒)
Now, From ∆𝑆 𝑆 𝑁,
sin 𝜃 = = …….. (1)
Also from ∆𝑃𝑀𝑂,
tan 𝜃 = = ………(2)
𝑠𝑖𝑛𝑐𝑒, 𝜃 is very small angle so tan 𝜃 ≅ 𝜃 ≅ sin 𝜃. Then from (1) and (2);
=
∴𝑆 𝑁= i.e. path difference (𝑆 𝑁) = , …………….(3)
For P to lie at the centre of bright fringe,
Path difference = 𝑛𝜆 ………..(4) for bright fringe (constructive interference)
Where n = 0,1,2,3
∴ from (3) and (4)
𝑛𝜆 = Or, 𝑥 = ………(5)
Here,
For n = 0, 𝑥 = 0; central bright fringe
For n = 1, 𝑥 = ; 1st bright fringe
For n = 2, 𝑥 = ; 2nd bright fringe
For n = 3, 𝑥 = ; 3rd bright fringe
3
If Q is neighbouring bright fringe i.e. (𝑛 + 1)𝑡ℎ bright fringe.
( )
Then, OQ = 𝑥 = (6)
So, the distance between two successive bright fringes called fringe width.
i.e. fringe width (𝛽) = OQ-OP = 𝑥 − 𝑥 = (n+1) − 𝑛
∴𝛽= ….(7) for bright fringe (Constructive interference)
For P to lie at the centre of dark fringe (Destructive interference)
Path difference = (2n+1) , ………..(8) where n = 1,2,3,4
Now, from (3) and (8) ; (2n+1) =
∴ 𝑥 = (2𝑛 + 1) … … … … … (9); nth dark Fringe
𝑛 = 1; 𝑥 = …………….. 1st dark fringe
𝑛 = 2; 𝑥 = …………….. 2nd dark fringe
The distance between two successive dark fringe is called fringe width.
i.e. 𝛽 = …………..(10) for dark fringe (destructive interference)
Thus, from equation (7) and (10), it is seen that, both dark fringe and bright fringes are of equal
width. So, 𝛽 =𝛽
Note: 1) Young's double slit experiment can be used to determine the wavelength of
monochromatic light, and fringe width (𝛽).
Note (2) : Fringe width (𝛽)=
a) 𝛽 ∝ 𝜆 → Directly proportional to wavelength of light used
b) 𝛽 ∝ 𝐷 → Directly proportional to distance between screen and coherent sources.
c) 𝛽 ∝ → inversely proportional to distance between two slits.
Note (3): Conclusions from Young's double slit experiment:
a) As expression for 𝛽 is independent of n, all fringes are of same width.
b) For appreciable fringe width, D should be large and d be small.
c) As 𝛽 ∝ 𝜆 , the fringe produce by light of shorter wavelength will be narrower as compared
to those produced by light of longer wavelength.
d) The two slits should be lie very close to each other otherwise width of fringe be different.