Scribd
Upload
127 views2 pages

Dynacoll® 7361-En

DYNACOLL 7361 is a partially crystalline copolyester used to manufacture reactive hot melt adhesives. It has a hydroxyl number of 10-16 mg KOH/g and acid number below 2 mg KOH/g. DYNACOLL 7361 is compatible when blended 1:1 with other DYNACOLL copolyesters and has a softening point of 65°C. When combined with 4,4-MDI at a ratio of OH/NCO of 1/2.2, it forms a reactive hot melt adhesive with a softening point of 63°C, open time of 50 seconds, and tensile strength of 20 N/mm2.

Uploaded by

LU CHUNHUI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
127 views2 pages

Dynacoll® 7361-En

DYNACOLL 7361 is a partially crystalline copolyester used to manufacture reactive hot melt adhesives. It has a hydroxyl number of 10-16 mg KOH/g and acid number below 2 mg KOH/g. DYNACOLL 7361 is compatible when blended 1:1 with other DYNACOLL copolyesters and has a softening point of 65°C. When combined with 4,4-MDI at a ratio of OH/NCO of 1/2.2, it forms a reactive hot melt adhesive with a softening point of 63°C, open time of 50 seconds, and tensile strength of 20 N/mm2.

Uploaded by

LU CHUNHUI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DYNACOLL 7361

43.13.652e / 01.18

Chemical composition

Solid, partially crystalline and saturated copolyester.

Application

Manufacturing of reactive hot melt adhesives with fast setting properties.

Specification

Property Value Unit Test method


Hydroxyl number 10 – 16 mg KOH/g DIN EN ISO 4629-2
Acid number max. 2 mg KOH/g DIN EN ISO 2114

Typical data

Molecular weight 8500 - from Hydroxyl number


Softening point (R + B) 65 °C DIN ISO 4625
Melting point 57 °C DSC
Open time 28 s Evonik method
Viscosity at 80 °C 15 Pa s Parallel plate

Compatibility with other DYNACOLL copolyesters (1:1 blends)


Transparent: 7110, 7111, 7130, 7131, 7150, 7230, 7231, 7250, 7255, 7320, 7321, 7330,
7331, 7340, 7360, 7362, 7363, 7365, 7380, 7381
Cloudy: -
Opaque: -
Phase separation: 7140, 7210, 7390

Form supplied

200 kg drums.

Page 1/2
43.13.652e / 01.18

Storage Stability

When stored below 30 °C in closed containers the product remains stable for at least one year from delivery. In
case of open or improperly closed containers, there is a possibility of increased moisture from the atmosphere.

Safety and Handling

Please refer to our Material Safety Data Sheet.

Reactive Hot Melt


Typical data

Reaction product from DYNACOLL 7361 with 4,4-MDI (Diphenylmethane-4,4'-diisocyanate) in a ratio OH/NCO
= 1/2.2

Property Value Unit Test method

Softening point (R + B) 63 °C DIN ISO 4625


Open time 50 s Evonik method
Setting time 10 s Evonik method
Viscosity at 130 °C 30 Pa s Parallel plate
2
Tensile strength 20 N/mm DIN 53 504
Elongation at break 550 % DIN 53 504

Evonik Operations GmbH Evonik Corporation Evonik Specialty Chemicals


Paul-Baumann-Str. 1 Resource Efficiency (Shanghai) Co., Ltd.
45764 Marl 299 Jefferson Road 55, Chundong Road
Germany Parsippany, NJ 07054-0677, USA Xinzhuang Industry Park
PHONE +49 2365 49-02 PHONE +1 973 929-8000 Shanghai, 201108, PR China
FAX +49 2365 49-5030 FAX +1 973 929-8460 PHONE +86 21 6119-1028
FAX +86 21 6119-1254
Email [email protected]
www.evonik.com/adhesives-sealants
www.evonik.com/designed-polymers

Replaces leaflet 43.13.652e / 09.06 and all former issues


Marl, January 12, 2017
DYNACOLL is a registered trademark of Evonik Industries AG or one of its subsidiaries
This information and all further technical advice are based on our present knowledge and experience. However, it implies no liability or other
legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular,
no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to
make any changes according to technological progress or further developments. The customer is not released from the obligation to
conduct careful inspection and testing of incoming goods. Performance of the product described herein should be verified by testing, which
should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used by other companies
is neither a recommendation, nor does it imply that similar products could not be used.

Page 2/2

You might also like