Read this manual carefully before use, and retain it for future reference.

This logo is for location 2. When the charging case's indicator light is blinking white, it indicates its battery Using quick pairing to connect to a Mi phone Restoring factory settings Specifications cause fire or even completely damage the product. WEEE Information
Product Overview indication only. level is low and it should be charged immediately. Place the earbuds into the charging case and close its lid. Ensure the Mi phone is 1. Place the earbuds into the charging case. Do not expose the product to environments with a temperature that is too low
Checking the battery level with a Mi phone unlocked and its Bluetooth is enabled, and hold it close to the charging case, then 2. Press and hold the function button for at least ten seconds until the indicator or too high (below 0°C or above 45°C). All products bearing this symbol are waste electrical and electronic
Name Wireless Earphones
After successfully connecting to a phone, place the earbuds into the charging case open the case's lid and follow the instructions on the phone to connect to the turns white, then release the button. Keep the product's indicator away from the eyes of children and animals while equipment (WEEE as in directive 2012/19/EU) which should not be
Model TWSEJ01ZM
and close its lid. Ensure the Mi phone is unlocked and its Bluetooth is enabled, and earbuds. 3. The factory settings of the earbuds have been restored, the connection history the product is in use. mixed with unsorted household waste. Instead, you should protect
Charging Port Type-C
hold it close to the charging case, then open the case's lid. A popup to check the Note: To use the feature to quickly connect, the phone's system needs to be has been cleared, the charging case's indicator blinks white, and the earbuds are in Do not use this product during thunderstorms. Thunderstorms may cause the human health and the environment by handing over your waste
Indicator Secondary Net Weight Approx. 55 g
battery levels of the earbuds and the charging case will appear on the phone. updated to the latest stable version. Currently, only some Mi phones support this pairing mode again. product to malfunction and increase the risk of electric shocks. equipment to a designated collection point for the recycling of waste
Microphone Impedance 32 Ω
Note: To use the feature to quickly check the battery level, the phone's system needs feature. Note: Due to the technical characteristics of Bluetooth, there may be occasional Do not clean this product with alcohol or other volatile liquids. electrical and electronic equipment, appointed by the government or
Earbud Input 5.25 V=120 mA Max. (per earbud)
to be updated to the latest stable version. Currently, only some Mi phones support intermittent loss of connection or sound in areas with dense electromagnetic signal Avoid any contact with liquids. local authorities. Correct disposal and recycling will help prevent
Function Button Earbud Battery Capacity/Energy 35 mAh/0.13 Wh (per earbud)
this feature. Connecting to two devices interference at 2.4 GHz. Do not disassemble, puncture or crush the product nor expose it to fire. potential negative consequences to the environment and human
Primary Charging Case Battery Capacity/Energy 470 mAh/1.78 Wh
Type-C Wired Charging Type-C Wireless Charging The earbuds can be connected to two different Bluetooth devices simultaneously. Stop using the product immediately if there is any swelling. health. Please contact the installer or local authorities for more
Microphone Charging Case Input Wired Input: 5 V=500 mA Max.
Charging Port Turning on the earbuds After connecting the earbuds to the first device, put them in the charging case and To prevent possible hearing loss, do not use high volume for long periods of information about the location as well as terms and conditions of such
The center of the wireless charger must be aligned with the center of the charging Wireless Input: Supports wireless
Opening the charging case will automatically turn on the earbuds. open the lid. Press and hold the function button on the charging case for two time. collection points.
Charging Case Earbud case in order to charge, which is about 8 mm above the Redmi logo on the back of
seconds, then the indicator will start blinking white, and the earbuds are ready to Functions chargers of 5 W or higher
Do not use the earbuds while driving, and comply with the relevant regulations
the charging case. The charging case's indicator will Sleep mode Wireless Connectivity Bluetooth 5.2
in your region or country.
be paired with a second device.
How to Use be lit while charging. During calls Bluetooth Profiles Bluetooth® Low Energy/HFP/A2DP/ Anti-counterfeit Label Instructions
Place the earbuds back into the charging case and close the lid, then the earbuds These earbuds and their accessories may contain small parts. Please keep them
Note: Illustrations of the product, accessories, and user interface in the user manual Gently tap either earbud twice: Answer call AVRCP
Charging will disconnect and enter sleep mode automatically. Disconnecting out of the reach of children.
are for reference purposes only. The actual product and functions may vary due to Gently tap either earbud three times: Reject/End call Operating Range 10 m (in an obstacle-free environment) The Redmi Buds 3 Pro have an anti-counterfeit label on the outer packaging. You
Charging the earbuds When a device's Bluetooth is disabled, or if the earbuds are out of range, the Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting
product enhancements. Music Bluetooth Operation Frequency 2400–2483.5 MHz(for EU) can check the authenticity of the product by scratching the anti-counterfeit
When the earbuds are placed in the charging case, they will automatically start Wearing the earbuds earbuds will automatically enter awaiting connection mode. If the earbuds remain of a battery, that can result in an explosion.
Gently tap either earbud twice: Play/Pause Maximum Output Power for BT ≤13 dBm (for EU) coating and entering the anti-counterfeit code.
charging. Take the earbuds out of the charging case, and insert them into your ears according disconnected from the device for 10 minutes, they will enter sleep mode. Wearing Leaving a battery in an extremely high temperature surrounding environment
Checking the battery level Maximum Output Power for for BLE ≤13 dBm (for EU) Website: www.mi.com/verify
Charging the charging case to the left (L) and right (R) marks. the earbuds again will wake them up and they will enter awaiting connection Gently tap either earbud three times: Next song that can result in an explosion or the leakage of flammable liquid or gas.
Checking the battery level of the earbuds Note: After using the earbuds, place them back into the charging case. This will Take out either earbud: Pause music Wireless Charging Operating Frequency 110–148KHz A battery subjected to extremely low air pressure that may result in an explosion
Use the included type-C charging cable to charge the charging case, or place it on mode.
After connecting the earbuds to a phone, you can check the earbuds' battery level on extend their service life and helps to avoid losing or misplacing them. Noise cancellation Operating Temperature 5°C to 40°C or the leakage of flammable liquid or gas.
a compatible wireless charger with the indicator facing upwards. The indicator is
the phone's status bar. Charging Time (Charging Case) Approx. 2.5 hours (by charging cable)
white while charging, and turns off when charging is completed. Automatic connection Press and hold either earbud to switch between: Product information and certification marks are located in the Charging Case.
Note: Only the battery level of the earbud with the lowest battery level of the two is Do not put the battery in trash that is disposed of in landfills. When disposing of
Note: Please use a power adapter that meets the local certification requirements, When the earbuds are in the charging case, opening the lid of the charging case Enable noise cancellation <> Transparency mode The Bluetooth® word mark and logos are registered trademarks owned by
or a wireless charger that supports charging at 5 W or higher.
displayed on the phone's status bar. This feature is not supported by some phones. How to Connect will automatically connect the earbuds to the most recently used Bluetooth device. Bluetooth SIG, Inc. and any use of such marks by Xiaomi inc. is under license. Other the battery, comply with local laws or regulations.
To prevent possible hearing loss, do not use this product at high Anti-counterfeit Label Scratched-off Coating
Checking the battery level of the charging case Replacement of a battery with an incorrect type that can defeat a safeguard
If no connection history is detected, or if the earbuds cannot successfully connect volume for long periods of time. trademarks and trade names are those of their respective owners.
When the lid of the charging case is closed, press the function button or open the lid Connecting to a new device
to any Bluetooth device, the earbuds will automatically enter the awaiting The Qi logo is a registered trademark of the Wireless Power Consortium. (such as catching fire, explosion, leakage of corrosive electrolyte etc).
of the charging case to check the battery level: 1. Place the earbuds into the charging case, then press and hold the function button
connection mode. The symbol indicates DC voltage Manufactured for: Xiaomi Communications Co., Ltd.
1. When the charging case's indicator is white for about 5 seconds, it indicates the for about two seconds. The charging case's indicator light will start blinking white
battery level is sufficient. to indicate that the earbuds are awaiting a connection.
Note: If the earbuds cannot automatically connect to a device, you will need to Warning Manufactured by: Zimi Corporation
manually connect the earbuds to the desired device via the device's Bluetooth Address: A913, No. 159 Chengjiang Road, Jiangyin, Jiangsu, China
2. Enable the device's Bluetooth, then search for and connect to the "Redmi Buds 3 Do not attempt to disassemble, repair or modify the product, as this may
settings. For further information, please go to www.mi.com
Pro". If a passcode is requested, enter "0000".
1 2 3 4 5 6 7 8