0% found this document useful (0 votes)
240 views2 pages

LW550FN - Juni 2023

The document provides specifications for a wheel loader model LW550FN including: 1. Key specifications of the loader including a rated power of 162 kW, total weight of 17,100 kg, and bucket capacity of 3.0 m3. 2. Details on the frame design with a lengthened wheelbase for stability under heavy loads and rolling/knuckle bearings in hinged positions. 3. Additional features including a pressurized cab for operator comfort and specialized configurations available for different industry needs.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
240 views2 pages

LW550FN - Juni 2023

The document provides specifications for a wheel loader model LW550FN including: 1. Key specifications of the loader including a rated power of 162 kW, total weight of 17,100 kg, and bucket capacity of 3.0 m3. 2. Details on the frame design with a lengthened wheelbase for stability under heavy loads and rolling/knuckle bearings in hinged positions. 3. Additional features including a pressurized cab for operator comfort and specialized configurations available for different industry needs.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LW550FN

162 kW
Rated Power
17100 kg
Total Weight
3.0 m3
Bucket Capacity

WHEEL LOADER
• The wheelbase is lengthened. Thus, the advantages of the long
wheelbase are used and it can be used under heavy load.
• The wing box with castling lug is adopted for the front frame,
and the bending plate with various stiffness is welded into the
box beam with deformed section to make up the rear frame.
Thus, it has high bearing capacity.
• The rolling bearing+knuckle bearing are adopted in the hinged
position of the front and rear frames. The bearing capacity is
high and the it is highly stable.
• Designed with big steering angle, flexible, suitable to a lot of
workplaces
• Pressurized cab, increasing 20% of space, wide view, sound
insulation and noise reduction, comfortable to operate.
• Varied configuration, complete parts, meeting construction
Head Office Gaya Makmur Putra
requirements for different areas and working conditions
Jl. Lingkar Luar Barat No.3 Rawa Buaya - Cengkareng
• Configure special models for conditions of the logical power
Jakarta Barat - Indonesia 11740
plants: for example, grasping grass machine (configure high Telp : (62 21) 5828 799
loader, grasping grass machine, oil filter, spark arrester, single- Email : [email protected]
layer radiator and so on) Website : www.gmtractors.net
SPECIFICATION WHEEL LOADER LW550FN

Description Parameters
Rated operating load 5300 kg
Bucket capacity 3.0(3.0~4.5) m3
Machine weight 17100 kg
Dump clearance at maximum lift 3060 mm
Reach at maximum lift 1130 mm
Wheelbase 3200 mm
Tread 2250 mm
Working height 5580(Standard arm 3.0) mm
Maximum breakout force 170 kN
Hydraulic cycle time-raise ≤5 s
Total cycling time 10 s
Min. turning radius(over tire) 6045 mm
Articulation angle 37o
Gradeability 28o
Tire specification 23.5-25-16PR
Overall dimensions (length x width x height) 8180×2996×3515
Emission standard China II
Rated power 162 kW
Capacity of fuel tank 250 L
Capacity of hydraulic oil tank 210 L
Driving 1st speed (forward/reverse) 13/18 km/h
speed 2nd speed (forward/reverse) 41 km/h

THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR &
APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN.

Networking
Semarang I Surabaya I Denpasar I Kupang I Medan I Pekanbaru I Palembang I Batam I Balikpapan I Banjarmasin I Makassar I Manado I Kendari I Samarinda I Pontianak I Manado

03/2023

You might also like