SUR Ue SAFETY HELMET Industrial safety helmets by PROGUARD® have a unique combination of safety, comfort, styling features, and provide excellent head protection that conform to Malaysia SIRIM standard. PROGUARD® safely helmets are fitted with energy absorber anchorage system which considerably enhances the shock absorption effectiveness ofthe salely helmet. Moreover, the Slide-Lock adjustment system enables the internal hamess to be adjusted while the safety helmet is being worn. Like most PROGUARD® PPE products, our attention is given to our users safety and convenience. Other PPE accessories have been Gesigned to be fitted to PROGUARD® safety helmets without compromising their effectiveness, including ear muffs and face shields. Cur safety helmets come in vented and unvented models and with a range of colours which can distinguish diferent worker classifications onsite PROGUARD® helmets cary SIRIM standard certification, which confirm thatthe helmets have been tested for shock absorption, penetration, stifness,flammabily test, and chin strap anchorage test EN 397, AS/NZS 1801 Type 1 & MS 183 : Safety Helmet ENGi2: Bump Caps Directive and cary te following information by way of proof: D> SIRIM, EN, & CE Mark. D> Standard Number. D> Date, year & month of manufacturing, D> Material We provide a user instruction leaflet on every helmet for better explaination about usage, cleaning, shelf life, and storage purpose. Do not interchange suspensions, harnesses, or shells from different manufacturers because they might not have been tested to ensure compliance withthe standards and would likely void certification, Shell Life All PROGUARD® safety helmets are marked with month and year of manufacturing. Ifthe helmets are stored in boxes which they are supplied with and not experience ‘any environmental stress, the shelf life is not limited. However, it is not recommended that a helmet should be in use afler 5 years from date of manufacturing. ABS - Performs well n tropical climate temperatures Offers good impact abrasion and chemical resistance. ‘Aso @ good electrical insulator. OSD) All of PROGUARD® helmets are equipped with a sweatband and chin strap. Either can be purchased separately. Standard : MS 183:2001 & EN397:2012 +-A1: 2012, Result: The chin strap anchorage shall release between force 150N-250N. PROGUARD® safety helmets can be ited wit a wide range of PROGUARD® visors or hearing protections. Look after your headgear and De Cary D> Keep your helmet clean with a soft oloth, mild soap, and water D> Store out of direct sunlight, between 5 - 25°C. > Inspect it regularly, Anything more than a superficial sorape or abrasion, replace it. D> Please dispose immediately & replace the helmet after it has withstood impact or penetration. D> Replace helmet suspension after not more than 12 months of usage. D> Keep away from abrasive chemicals, solvents, and self-adhesive labels. S Fa ey PelThe ADVANTAGE 2 has a similar built and specification as its predecessor with an overall lighter build. These helmets are moulded with a unique airflow vent to minimise heat build up and to improve user's comfort as well for application requirements. The shell is designed with an 8 point suspension system and can be fitted with various PROGUARD” harnesses and locking systems. The shell can also be fitted with various PROGUARD® accessories through the lateral slots at the side for different usages and needs of the various industries and applications. ‘Your Ultimate Portner In Safety ® £Advantage*i!CT 4 rs 4 ‘SUDE Lack Tia ng rer ely Non-Swivel PINLock Pin Lock re rs Mode: HG2-S2PHPB < ust Lock re o PUSH 00K em y Q : Mail ABS Se Descion: ABS Vere Sel ee wh Side Loo sya, Hanes Pasi tess Campane: Campy wth S183, ANS 70,1 & EO ASINDS 101 TPE DOH Approval No: JkKP SH 16718 Packaging 1 pape, peeaton Dison: 540486 (0 peat) Nate! ABS Ste Descinton “ABS Veriod Stel hed wih Pin Lock syst, Hamess Plast Haress. Compiance: Compl wit MS 18, NS 780.1 LENGE, AGINZS 1801 TYPE [DOSH Approval No: JKKP SH 17/18 Paclaying_:1popoyag, 24 postaton Dimetsion_: 4953306 x6DEre (24 pesearon) [ vematcoewn_ Ci aa Ce" @ Nate! ABS Sel Desziton: ABS Void Stal had wih Pash Lock system, amass “Plastic Harness. Compiane- Comply wit MS 18, ANS! 7681 & NOT, ASINZS 1801 TYPE [DOSH Approval No: JKKP SH 18/18 Paclayng_1popobag, 24 polaron Dimetsion 463306 x lm 24 pesaron) =a Citas Nate! :ABS Sel Descinton: ABS Vera Stel hed wih Pash Lock system, HamessWeting Hares, Compiane: Comply wit MS 183, ANSIZB6.1& G97, ASINZS 1801 TYPE [DOSH Approval No: JKKP SH 19/18 Paolaying_:1 popoyag, 24 pestaron Dimetsion_: 4963306 x6DEre (24 pseaon)