Partition ST60

Metal coating and aluminium honeycomb core

GSP-0205-E/B

The ST60 partition is designed for Ultra-Clean rooms

that must be kept completely free of micro-biological
contamination.
This partition consists of non combustible modular
panels of thickness 60 mm 2.36’’, made of time-stable
materials and no emitting particles.
The ST60 partition, providing smooth surfaces easy to
clean, is airtight and insulating.

Design

Core
Aluminium honeycomb, link Ø 19 mm 0.75’’, metal strip thickness 50 μm (vertical
panels)
Alloy 3003 (EN 573 standard)
Rustproof treatment
Density : 20 kg/m3 1.24 lb/ft3 (50 µ)
Fire reaction : non combustible
Resistance to compression : average value 270 kPa 39.16 PSI

Glue : bi-components Polyurethane

metal folded edges

coating
profile
aluminium
honeycomb core

Facings
Class according to
Supports Coatings according to NF EN 10169 Thicknesses (in mm)
XP P 34-301
coated with polyester 25 μm lacquer 0,5 0.02’’ 0,6* 0.02’’ 0,8 0.03’’ llla

Steel sheet S280 GD, hot-dip galvanised coated with PVDF 35 μm lacquer 0,6 lVb
Z225 (225g/m² of zinc on the 2 faces) or coated with PVC 120 μm 0,6 Vc
similar
coated with a complex of polyester lacquer and
0,6 Vc
PET film of total thickness 55 μm

polished S4 0,6 0,8

Smooth stainless steel sheet of slight 304
Not applicable
or 316 L coated with a PVC + PET film of total thickness
0,6
130 μm

* standard facing
Standard colour : iceberg white (close to RAL 9010)
NB: on request, the two facings can be of different materials on inside and outside faces (aspect, colour and/or thickness)

Panel profiles
Metallic profile for passage of cables.

Non contractual document - Dagard reserves the right to modify its products without notice. 09-07-2019

DAGARD - Route du Stade - 23600 Boussac - FRANCE -1- [email protected] - www.dagard.com

 Partition ST60
Metal coating and aluminium honeycomb core
GSP-0205-E/B

Technical characteristics

Panel

Thickness 60 mm 2.36’’
0,20 m 0.65’; 0,25 m 0.82’ ; 0,35 m 1.15’ ;
Widths 1,20 m 3.94’
0,55 m 1.80’; 0,80 m 2.62’ ; 1,00 m 3.28’
Maxi. lengths 4 m 13.12’ 6 m 19.68’

- 10,7 kg/m2 2.19 lbs/sq.ft (2 faces 0,5 mm 0.019’’ steel)

Weight
- 6,9 kg/m2 1.41 lbs/sq.ft (2 faces 0,67 mm 0.027’’ aluminium)

Tightness
Qs ≤ 0,0027 m3/h.m2 0.0088 ft3/h.ft² under ∆P = 50 Pa 0.007 PSI
in whole partition with silicon joint

Maximum acceptable loads in partition

Bending resistance, panels on 2 supports

Partition height (m) 2,50 8.20’ 3,00 9.84’ 3,50 11.48’ 4,00 13.12’ ≤ 5,80 19.03’

q (daN/m2) 75 15.67 lbf/ft² 55 11.49 lbf/ft² 42 8.78 lbf/ft² 30 6.27 lbf/ft² 20 4.18 lbf/ft²

Installation
Assembly
Profiles integrated in the thickness of ST panels, allow the assembly of panels and the passage of cables. The system uses an
aluminium key profile that is inserted into the full length grooves both sides of wall panels.

A special feature without the link profile allows this partition to become removable panel by panel, thanks to stainless steel clips.

joint silicone
profile

stainless steel
clips

Assembly between panels

Tightness
- Silicon sealant (quality-label SNJF ; complies with FDA 21 CFR 175.105)
- Polymer MS caulk

Non contractual document - Dagard reserves the right to modify its products without notice. 09-07-2019

DAGARD - Route du Stade - 23600 Boussac - FRANCE -2- [email protected] - www.dagard.com

 Partition ST60
Metal coating and aluminium honeycomb core
GSP-0205-E/B

Reports and approvals

Fire reaction:
Euroclass = A2-s1,d0

FM Global approval: FM Approvals (standard 4880) = Class 1

UL approval (cable routing) Safety E471046

Consult the data n°0112 «Reports and approvals».

Non contractual document - Dagard reserves the right to modify its products without notice. 09-07-2019

DAGARD - Route du Stade - 23600 Boussac - FRANCE -3- [email protected] - www.dagard.com