Scribd
Upload
222 views

Cummins PowerStart 0600 Generator Control Panel ADE Power

The document summarizes the Cummins PowerStart 0600 control panel. It has an integrated LCD display and controls engine starting and stopping as well as monitoring critical engine functions. It provides genset protection and real-time fault monitoring. It can monitor single or three phase AC power and has remote start capability in auto mode. The control panel is suitable for use on a wide range of Cummins generator sets.

Uploaded by

hybpdftng9
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
222 views

Cummins PowerStart 0600 Generator Control Panel ADE Power

The document summarizes the Cummins PowerStart 0600 control panel. It has an integrated LCD display and controls engine starting and stopping as well as monitoring critical engine functions. It provides genset protection and real-time fault monitoring. It can monitor single or three phase AC power and has remote start capability in auto mode. The control panel is suitable for use on a wide range of Cummins generator sets.

Uploaded by

hybpdftng9
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

› Support Portal !

+44 (0) 1977 658 100 English ⌄

HOME › GENERATORS › CONTROL PANELS › CUMMINS

› POWERSTART 0600

CUMMINS POWERSTART 0600


CONTROL PANEL

CUMMINS POWERSTART
0600 FEATURES

♦ Integrated 128x64 pixel monochrome graphic LCD display

♦ 12 and 24V battery operation

♦ Genset monitoring status of all critical engine and


alternator functions

♦ Digital genset metering (AC & DC)

♦ Genset battery monitoring system to warn against a weak


battery connection

♦ ConGgurable for single phase, 3 phase or split phase AC


metering

♦ Engine starting includes solid state output to operate


external relay to start the engine, fuel shut-off (FSO) and
glow plug

♦ Genset protection: protects engine and alternator

♦ Real-time clock for fault and event stamping

♦ Fuel level measurement using 4-20mA input sensor

♦ Exerciser clock and time of delay start/stop initiate a test


without load

♦ "Maintenance due" alarm based on engine running time


and real-time clock

♦ Auto Mains Failure (AMF) provides load transfer operation


in open transition mode

♦ AMF test with or without load options

♦ Utility voltage monitoring and protection

♦ Remote start capability in auto mode

♦ Advanced serviceability using InPower™ - a PC based


software service tool

♦ Modbus interface for interconnecting to customer


PLC/BMS

♦ ConGgurable inputs and outputs

♦ Environmental protection: The control is designed for


reliable operation in harsh environments

♦ Warranty and service: backed by a comprehensive warranty


and worldwide distributor service network

♦ CertiGcation-suitable for use on generator sets that are


designed, manufactured, tested and certiGed relevant ISO,
IEC and CE standards

! FULL SPECIFICATION

CUMMINS PS0600 GENSET


CONTROLLER
The PowerStart™ 0600 control is a microprocessor-based

generator set monitoring and control system. The control

provides a simple operator interface to the generator set,

manual and remote start/stop control and shutdown fault

indication and AMF (Auto Mains Failure) functionality. The

integration of all control functions into a single control provides

enhanced reliability and performance compared to

conventional generator set control systems. This control has

been designed and tested to meet the harsh environment in

which gensets are typically applied. The PowerStart™ generator

set control is suitable for use on a wide range of generator sets

in non-paralleling applications. It is suitable for use with

reconnectable or non-reconnectable generators, can be

conGgured for either 50 or 60 Hz and voltage and power

connections from 190-600 VAC line-to-line. This control

includes an intuitive operator interface that allows genset

start/stop for complete genset control as well as system

metering, fault annunciation, conGguration and diagnostics.

The interface includes seven generator set status LED lamps

with both internationally accepted symbols and English text to

comply with customer needs.

The interface also includes an LED backlit LCD display with

tactile-feel soft-switches for easy operation and screen

navigation. The manual/auto/stop switch function is integrated

into the overlay of the controller. All data on the control can be

viewed by scrolling through screens with the navigation keys.

Screens can be viewed either by scrolling or non scrolling

mode. Forward and backward navigation is also provided. The

control displays the current active fault, fault occurrences and a

time-ordered history of the Gve previous faults with respect to

the real-time clock stamp & engine running time. Power for this

control is derived from the generator set's starting batteries

and functions over a voltage from 8VDC to 32VDC.

♦
GENERATORS FEATURING THE
CUMMINS POWERSTART 0600
CONTROLLER:

Cummins C22D5 1ph Cummins C22D5

17 kVA 15.5 kVA 22 kVA 20 kVA


Standby Prime Standby Prime

〉 Cummins Diesel Engine 〉 Cummins Diesel Engine


〉 Stamford 50Hz Alternator 〉 Stamford 50Hz Alternator
〉 Auto Start 〉 Auto Start
〉 Single Phase - 240V 〉 Three Phase - 380-415V
〉 Silent Build Type 〉 Silent Build Type

VIEW 〉 VIEW 〉

Cummins C28D5 1ph Cummins C22D5Q

22 kVA 20 kVA 22 kVA 20 kVA


Standby Prime Standby Prime

〉 Cummins Diesel Engine 〉 Cummins Diesel Engine


〉 Stamford 50Hz Alternator 〉 Stamford 50Hz Alternator
〉 Auto Start 〉 Auto Start
〉 Single Phase - 240V 〉 Three Phase - 400V
〉 Silent Build Type 〉 Silent Build Type

VIEW 〉 VIEW 〉

Cummins C28D5 Cummins C28D5Q

27.5 kVA 25 kVA 27.5 kVA 25 kVA


Standby Prime Standby Prime

〉 Cummins Diesel Engine 〉 Cummins Diesel Engine


〉 Stamford 50Hz Alternator 〉 Stamford 50Hz Alternator
〉 Auto Start 〉 Auto Start
〉 Three Phase - 380-415V 〉 Three Phase - 400V
〉 Silent Build Type 〉 Silent Build Type

VIEW 〉 VIEW 〉

Cummins C33D5Q Cummins C38D5Q

33 kVA 30 kVA 38 kVA 35 kVA


Standby Prime Standby Prime

〉 Cummins Diesel Engine 〉 Cummins Diesel Engine


〉 Stamford 50Hz Alternator 〉 Stamford 50Hz Alternator
〉 Auto Start 〉 Auto Start
〉 Three Phase - 400V 〉 Three Phase - 400V
〉 Silent Build Type 〉 Silent Build Type

VIEW 〉 VIEW 〉

Cummins C44D5e Cummins C44D5EQ

44 kVA 40 kVA 44 kVA 40 kVA


Standby Prime Standby Prime

〉 Cummins Stage IIIa 〉 Cummins Stage IIIa


Diesel Engine Diesel Engine
〉 Stamford 50Hz Alternator 〉 Stamford 50Hz Alternator
〉 Auto Start 〉 Auto Start
〉 Three Phase - 380-415V 〉 Three Phase - 400V
〉 Silent Build Type 〉 Silent Build Type

VIEW 〉 VIEW 〉

Cummins C55D5e Cummins C55D5EQ

55 kVA 50 kVA 55 kVA 50 kVA


Standby Prime Standby Prime

〉 Cummins Stage IIIa 〉 Cummins Stage IIIa


Diesel Engine Diesel Engine
〉 Stamford 50Hz Alternator 〉 Stamford 50Hz Alternator
〉 Auto Start 〉 Auto Start
〉 Three Phase - 380-415V 〉 Three Phase - 400V
〉 Silent Build Type 〉 Silent Build Type

VIEW 〉 VIEW 〉

Cummins C66D5e Cummins C66D5EQ

66 kVA 60 kVA 66 kVA 60 kVA


Standby Prime Standby Prime

〉 Cummins Stage IIIa 〉 Cummins Stage IIIa


Diesel Engine Diesel Engine
〉 Stamford 50Hz Alternator 〉 Stamford 50Hz Alternator
〉 Auto Start 〉 Auto Start
〉 Three Phase - 380-415V 〉 Three Phase - 400V
〉 Silent Build Type 〉 Silent Build Type

VIEW 〉 VIEW 〉

! +44 (0) 1977 658 100

✉ [email protected]

" 14 Langthwaite Business Park, South Kirkby, Pontefract, WF9

3AP, UK

      

We use cookies to improve your experience and

analyse website trajc. Read more about how we use


© Copyright ADE Power Ltd. 2024. All Rights Reserved.
cookies in our Privacy & Cookie Policy.
Add ADE Power
› FAQ's to your› Home
› Sitemap Screen to
Contact Us
get regular updates. Tap Share
GOT IT! and then
Add to Home Screen

You might also like