Fibromat ® MTS Series

Polyester Needle Punched Nonwoven Geotextile

®
Technical Specifications of Fibromat MTS Series Nonwoven Geotextile
Fibromat® MTS Series is a mechanically bonded, UV stabilized geotextile, made from 100% polyyester crimped short fibre.

MTS MTS MTS MTS MTS MTS MTS MTS MTS MTS
Properties Unit
130 150 180 200 250 300 350 400 500 600
Test standard

Mechanical Properties
Tensile Strength (avg.) kN/m 10.3 11.9 13.5 15.1 18.3 21.6 26.7 31.9 35.0 41.0 ASTM D4595
Tensile Elongation (avg) % 56.0 59.0 62.0 64.0 70.0 75.0 70.0 64.0 65.0 64.7 ASTM D4595
CBR Puncture Resistance kN 1.5 1.8 2.1 2.4 2.9 3.3 4.1 4.3 5.4 6.3 ASTM D6241
Grab Tensile Strength, MD N 620 664 730 810 960 1110 1500 1900 2001 2101 ASTM D4632
Grab Tensile Strength, CD N 665 725 835 925 1125 1330 1690 2051 2601 3151 ASTM D4632
Rod Puncture Resistance N 310 354 457 500 648 800 985 1175 1274 1373 ASTM D4833
Trapezoidal Tearing Strength N 205 235 333 370 455 550 640 710 880 1090 ASTM D4533
Apparent Opening Size, O90 µm 160 150 90 90 90 80 80 80 70 70 ASTM D4751
Cone drop mm 14 ISO 13433
Hydraulic properties
Vertical Permeability (50mm head) l/m²/s 90 90 75 74 72 72 55 46 45 45 ASTM D4491

UV Resistance
Tensile Strength Retention > 70% Outdoor Weathering Strength Retention after 3 months IS0 10319
Puncture Strength Retention > 70% Outdoor Weathering Strength Retention after 3 months ISO 12236
Chemical Resistance No influence at pH 2-13
Physical Properties
Nominal Mass g/m² 130 150 180 200 250 300 350 400 500 600 ASTM D5261
Thickness mm 1.08 1.12 1.16 1.29 1.46 1.64 2.01 2.38 3.58 4.00
Roll Width m 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9
Roll Length m 260 230 190 170 140 120 100 90 70 60
Roll Area m2 1534 1357 1121 1003 826 708 590 531 413 354
Roll Weight kg 202 207 205 204 210 215 210 215 210 212

The information in this data sheet is a presentation of typical average values obtained from tests conducted in accordance with accepted test methods at the time of manufacture. These values are subject to normal manufacturing
variations. While we believe that the information is accurate and represents the true attributes of the product, we make no express or implied warranties and assume no liability for the use of this information. We reserve the right to make
periodic revisions to the specifications without prior notice.

Note:
1. Above values are obtained in our laboratory
2.There may be some variation in the above values due to various factors when tested at other laboratories
3. The above values may also change if the fabric is converted into any value added products or used in combination with other geosynthetic products
4. The values may also change during transportation and improper storage and handling at site
5. The values are not intended as warranty/ gurantee and MTS Fibromat assumes no liability in connection to this information

MTS Fibromat (M) Sdn. Bhd. (491502-K)