Scribd
Upload
16 views2 pages

Chaintop MT

Chaintop MT is a range of synthetic chain lubricants developed for lubricating chain systems, bolts, and roller chains at medium and high temperatures. The lubricants are chemically and thermally stable, burn clean with minimum residues, and withstand high temperatures for long periods. They are excellent anti-wear agents and lubricants with enhanced penetrating properties. Chaintop MT can be used for manual lubrication, dripping mist lubrication, central lubrication of bearings, open gears, chains, and slides in various applications.

Uploaded by

mpe.mohamed2010
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views2 pages

Chaintop MT

Chaintop MT is a range of synthetic chain lubricants developed for lubricating chain systems, bolts, and roller chains at medium and high temperatures. The lubricants are chemically and thermally stable, burn clean with minimum residues, and withstand high temperatures for long periods. They are excellent anti-wear agents and lubricants with enhanced penetrating properties. Chaintop MT can be used for manual lubrication, dripping mist lubrication, central lubrication of bearings, open gears, chains, and slides in various applications.

Uploaded by

mpe.mohamed2010
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Chaintop MT

Synthetic medium and high temperature chain lubricant

Description Benefits
Chaintop MT is a range of synthetic fluids  Enhanced penetrating properties
developed for the lubrication of chain  Chemically and thermally stable
systems, bolts and roller chains, sliding  Burns clean leaving minimum
tracks and plain tracks. Operating at residues
medium and high temperatures. Chaintop  Excellent wear inhibitors and good
MT are chemically stable fluids, thermally lubricants
stable and reduce the evaporation residue.  Neutral behaviour towards
They can withstand high temperatures negative influence of by-products
during a long period of time and are in f.i. textile industry
excellent anti wear agents and excellent  No staining
lubricants with enhanced penetrating  Keeps slides and chains clean
properties.
 Long relubrication intervals
 Very good cold starting properties

Applications

Use Applications
Manual Dripping Mist Central Bearings Open Chains Slides
lubrication lubrication gears
MT 50 X X X X X X X
MT 100 X X X X X X X
MT 150 X X X X X X X
MT 220 X X X X X X X
MT 320 X X X X X
MT 4200 X X X X

All performance data on this Technical Data Sheet are indicative only and can vary during production
Matrix Specialty Lubricants BV - [email protected] – www.lubes-portal.com

31/12/2015 Version 2 Page 1 of 2


Typical performance data

MT 50 MT 100 MT 150 MT 220 MT 320 MT 4200


Density @ 15 ºC, gr/ml 0.960 0.962 0.970 0.971 0.972 0.975
Viscosity @ 40 ºC, cSt 55 100 150 220 320 4200
Viscosity index 100 100 100 100 100 100
Flash point, ºC >270 >265 >265 >240 >230 >230
Pour point, ºC <-45 <-35 <-28 <-25 <-22 <-5
Copper corrosion 1a 1a 1a 1a 1a 1a
3hr/100 ºC
Acidity index, mgKOH/gr <1 <1 <1 <1 <1 <0.5

Use
In order to get the best possible result, cleaning of the chains is recommended, especially
when applied on a dirty chain. Lubricating will improve once the residues are cleaned. Shorter
relubrication intervals are needed during the change-over period.

All performance data on this Technical Data Sheet are indicative only and can vary during production
Matrix Specialty Lubricants BV - [email protected] – www.lubes-portal.com

31/12/2015 Version 2 Page 2 of 2

You might also like