Scribd
Upload
34 views2 pages

ETABS Concrete Frame Design: ETABS 19.1.0 License # 15UYEJUG56XJZDS

The document summarizes the design of column C6 in a concrete frame using ETABS software. It provides details of the column section, material properties, design code parameters, axial and moment design capacities, shear design, and joint shear check. The column has a square cross section of 500mm x 500mm and is 3300mm long. It was designed for an axial load of -12.45 tonf and bending moments of 1.65 and 3.91 tonf-m.

Uploaded by

Alvida Davial
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
34 views2 pages

ETABS Concrete Frame Design: ETABS 19.1.0 License # 15UYEJUG56XJZDS

The document summarizes the design of column C6 in a concrete frame using ETABS software. It provides details of the column section, material properties, design code parameters, axial and moment design capacities, shear design, and joint shear check. The column has a square cross section of 500mm x 500mm and is 3300mm long. It was designed for an axial load of -12.45 tonf and bending moments of 1.65 and 3.91 tonf-m.

Uploaded by

Alvida Davial
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

ETABS 19.1.

0 License #*15UYEJUG56XJZDS

ETABS Concrete Frame Design


ACI 318-08 Column Section Design

Column Element Details (Summary) (Part 1 of 2)


Level Element Unique Name Section ID Combo ID Station Loc Length (mm) LLRF
piso 1 C6 36 COL 50X40 ENVOLVENTE 0 3300 0.681

Column Element Details (Summary) (Part 2 of 2)


Type
Sway Ordinary

Section Properties
b (mm) h (mm) dc (mm) Cover (Torsion) (mm)
400 500 49.6 27.3

Material Properties
Ec (kgf/mm²) f'c (kgf/mm²) Lt.Wt Factor (Unitless) fy (kgf/mm²) fys (kgf/mm²)
2188.2 2.1 1 42 42

Design Code Parameters


ΦT ΦCTied ΦCSpiral ΦVns ΦVs ΦVjoint
0.9 0.7 0.75 0.85 0.85 0.85

Axial Force and Biaxial Moment Design For Pu , Mu2 , Mu3


Design Pu Design Mu2 Design Mu3 Minimum M2 Minimum M3 Rebar Area Rebar %
tonf tonf-m tonf-m tonf-m tonf-m cm² %
-12.4546 1.65 3.91 0.34 0.38 20 1

Axial Force and Biaxial Moment Factors


Cm Factor δns Factor δs Factor K Factor Effective Length
Unitless Unitless Unitless Unitless mm
Major Bend(M3) 0.48388 1 1 1 2800
Minor Bend(M2) 0.397852 1 1 1 2800

Shear Design for Vu2 , Vu3


Shear Vu Shear ΦVc Shear ΦVs Shear ΦVp Rebar Av /s
tonf tonf tonf tonf mm²/m
Major, Vu2 1.7913 9.6832 0 0 0
Minor, Vu3 0.8841 9.4165 0 0 0

DINAMICO_CORREG_ESCAL.EDB Page 1 of 2 16/06/2020


ETABS 19.1.0 License #*15UYEJUG56XJZDS

Joint Shear Check/Design

Joint Shear Shear Shear Shear Joint Shear


Force Vu,Top Vu,Tot ΦVc Area Ratio
tonf tonf tonf tonf mm² Unitless
Major Shear, Vu2 N/A N/A N/A N/A N/A N/A
Minor Shear, Vu3 N/A N/A N/A N/A N/A N/A

(6/5) Beam/Column Capacity Ratio


Major Ratio Minor Ratio
N/A N/A

Notes:

N/A: Not Applicable

N/C: Not Calculated

N/N: Not Needed

DINAMICO_CORREG_ESCAL.EDB Page 2 of 2 16/06/2020

You might also like