HP HPE7-A07 Practice Questions

Aruba Certified Campus Access Mobility Expert Written

Exam
Order our HPE7-A07 Practice Questions Today and Get Ready to Pass with
Flying Colors!

HPE7-A07 Practice Exam Features | QuestionsTube

Latest & Updated Exam Questions
Subscribe to FREE Updates
Both PDF & Exam Engine
Download Directly Without Waiting

https://www.questionstube.com/exam/hpe7-a07/

At QuestionsTube, you can read HPE7-A07 free demo questions in pdf file, so
you can check the questions and answers before deciding to download the HP
HPE7-A07 practice questions. These free demo questions are parts of the
HPE7-A07 exam questions. Download and read them carefully, you will find that
the HPE7-A07 test questions of QuestionsTube will be your great learning
materials online. Share some HPE7-A07 exam online questions below.
1.You configured a tunneled SSID with captive portal and a ClearPass Guest Self Registration
workflow when testing and launching the self-registration workflow, after successful registration, the
login action shows the following error:

ow
N
m
xa
E
07
A
7-
E
P
H
e
What is the best solution to resolve this error?

th
r
A. You need to include the root and intermediate certificates in the captive portal certificate for your
e
fo
access points
ar
p

B. You need to De connected to the guest SSiD while testing.

re
-P

C. You need to change the Login Address in ClearPass to securelogin arubanetworKs.com

)
24

D. You need to include the root and intermediate certificates in the captive portal certificate for your
20

gateway
ch

Answer: D
ar
(M

Explanation:
s
on

Including the root and intermediate certificates in the captive portal certificate for the gateway will
ti
s

resolve the error seen during the login action after successful registration. This is necessary to ensure
ue
Q

the SSL/TLS handshake can be completed successfully, as the client browser needs to validate the
m

entire certificate chain.

xa
E
07
A
7-
E

2.Exhibit.
P
H
r
io
er
up
S
 ow
N
m
xa
E
An engineer has applied the above configuration to R1 and R2 However the routers OSPF adjacency

07
A
never progresses past the "EXSTART-DR" slate as shown below.

7-
E
P
H
e
th
r
fo
e
ar
p
re
-P
)
24
20
ch
ar
(M

Which configuration action on either router will allow R1 and R2 to progress past the "EXSTART/DR"
s
on

state?
ti

A. Change R1 and R2 to a network type of point-to-point.

s
ue

B. Remove the layer 3 MTU configuration.

Q
m

C. Ensure the OSPF process is not configured with passive-interface default.

xa
E

D. Change the IP address and mask applied to interface 1/1/1.

07

Answer: A
A
7-
E

Explanation:
P
H

In OSPF, the "EXSTART/DR" state indicates that the routers are trying to establish an adjacency but
r
io

are unable to progress. This can happen if the OSPF network type is incorrectly configured for the
er
up

type of connection between the routers. Given that R1 and R2 are connected via a point-to-point link
S

(as suggested by the /31 subnet), setting the network type to point-to-point on both routers will
remove the need for DR/BDR election, which is unnecessary on a point-to-point link, and allow OSPF
to progress past the "EXSTART" state and form a full adjacency.

3.A deployment using AP-635S is connected to a stack of CX 6300s as shown.

 ow
N
m
xa
E
07
A
7-
E
P
H
e
th
r
fo
e
ar
p
re
-P
)
24
20
ch
ar
(M
s
on
ti
s
ue
Q
m
xa
E
07
A
7-

The output of the snow LACPinterfaces shews the following:

E
P
H
r
io
er
up
S

What is causing this issue?

A. e0 is connected to a smart rate interface, and e1 is connected to a non-smart rate interface.
B. Spanning tree and loop protect are enabled on both AP uplink ports.
C. Each AP interface is connected to a routed-only interlace on different networks
D. The AP is configured with LACP active
Answer: D
Explanation:
In an Aruba deployment, if an AP's interfaces show different LACP states, it often indicates a
configuration mismatch. If one interface is up and the other is blocked as shown in the output, it’s
likely due to both interfaces on the AP being set to LACP active mode, which is a correct setting for
establishing an LACP channel with Aruba switches like the CX 6300 series.

4.Your customer asked for help to apply an ACL for wireless guest users with the following criteria:
• Wi-Fi guests are on VLAN 555
• allow internet access
• only allow access to public DNS servers

ow
• deny access to all internal networks except for any DHCP server

N
m
These session ACLs are already present in the CLI of the mobility gateway group:

xa
E
07
A
7-
E
P
H
e
th
r
fo
e
ar
p
re
-P
)
24
20
ch
ar
(M

You have access to the CLl.

s
on

Which user role meets all the criteria?

ti
s

A)
ue
Q
m
xa
E
07
A
7-
E
P
H
r
io
er
up

B)
S

C)
 D)

ow
N
m
xa
A. Option A

E
07
B. Option B

A
7-
C. Option C

E
P
D. Option D

H
e
th
Answer: A
r
Explanation: fo
e

Based on the criteria provided for wireless guest users, the correct user role configuration must allow
ar
p
re

internet access, only allow access to public DNS servers, deny access to all internal networks except
-P

for any DHCP server, and place the Wi-Fi guests on VLAN 555. The ACLs must permit services
)
24

necessary for basic internet access (such as DNS and DHCP) and block access to internal networks.
20

Option A satisfies these criteria with the following configurations:

ch
ar

user-role "WiFi-guest":
(M

This defines the role for Wi-Fi guests.

s
on

access-list session dhcp-acl: This applies the access list that likely permits DHCP, which is necessary
ti
s

for guests to obtain an IP address.

ue
Q

access-list session dns-acl: This applies the DNS access list, which likely restricts guests to using
m
xa

public DNS servers.

E

access-list session internal-networks: This applies the internal networks access list, which denies
07
A

access to internal networks.

7-
E

vlan 555: This sets the VLAN for Wi-Fi guests to 555.
P
H

Options B, C, and D are incorrect because they includeaccess-list session allowallwhich would permit
r
io
er

all traffic, contradicting the requirement to deny access to all internal networks.
up
S

Powered by TCPDF (www.tcpdf.org)