Scribd
Upload
222 views2 pages

PDS - Mix X520 Addmix Protect

This document provides information on Mix X520 Addmix Protect, an integral waterproofing admixture for cement/sand mortars. It improves workability and reduces concrete porosity. The powder is added to dry cement/sand before water to create a homogenous, waterproof but vapor-permeable mixture. It contains pore-sealing and water-repelling additives. The product has a shelf life of 12 months and is non-hazardous.

Uploaded by

jasondouglas1810work
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
222 views2 pages

PDS - Mix X520 Addmix Protect

This document provides information on Mix X520 Addmix Protect, an integral waterproofing admixture for cement/sand mortars. It improves workability and reduces concrete porosity. The powder is added to dry cement/sand before water to create a homogenous, waterproof but vapor-permeable mixture. It contains pore-sealing and water-repelling additives. The product has a shelf life of 12 months and is non-hazardous.

Uploaded by

jasondouglas1810work
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Mix X520 Addmix Protect

INTEGRAL WATERPROOFING ADMIXTURE

TECHNICAL SHEET 30/01/2023

SMART ADVANTAGES APPLICATION

–Improved mortar workability SUBSTRATE PREPARATION


-Reduces concrete porosity All surfaces must be free from dirt, dust, grease, loose particles
-Chloride-free and other contaminants. Cracks and defects must be repaired.
Ensure surfaces are true and plum before attempting
installation of tile or marble.
DESCRIPTION
MIXING
Powder Mix X520 Addmix Protect is added to dry-mixed Portland
Mix X520 Addmix Protect is a ready-to-use waterproofing cement sand prior to its addition of water. Prepare the clean
admixture in powdered form for Portland Cement/sand mortars, water in a clean mixing container. Slowly pour the powder
making it a watertight but vapour-permeable structure. The Mix mixture into the containers while mixing (a heavy-duty electric
X520 Addmix Protect contains of pore-sealing mineral additives drill with a variable speed between 500-600 rpm is
and water-repelling agents. recommended). Adjust water content in small volumes to
satisfy workability requirement. Mix well until a homogenous
FUNCTIONAL CHARACTERISTICS slurry is obtained. Make sure that no unmixed power is left at
the bottom of the mixing container.
Mix X520 Addmix Protect is used to waterproof Portland
cement/sand renders and mortars for: CLEANING
 Walls
 Facades Tools, equipment and spillage should be cleaned immediately
 Floor toppings with water.
 Jointing and mortars
STORAGE & SHELF LIFE
COVERAGE
The shelf life of Mix X520 Addmix Protect is 12 months from date
 1 kg of Mix X520 Addmix Protect per 40 kg of Portland cement of manufacturing if stored in original, sealed and unopened
packaging in cool, dry and weatherproof environment.
TECHNICAL CHARACTERISTICS
PACKAGING

Appearance Powder
The Mix X520 Addmix Protect packed in 1 kg sealed packet.
HEALTH AND SAFETY

This product is non-hazardous and non-toxic but should be


treated with caution. Avoid dust development during
application. Good hygiene practices should be practice at all
times. Skin and eye contact should be avoided. Plastic or rubber
gloves and eye protection worn at all times. In case of eye
contact, wash repeatedly with water and seek immediate
medical attention.

For more detailed information refer to Safety Data Sheet.

The application recommendations are defined by standards


of use. They are imperative to respect them, but they don't
need a previous try, especially for the first use or particular
inconvenient of support, site or environment.
Consult our safety data sheet for precautions to use.

DISCLAIMER
Bostik offers this Technical Data Sheet (“TDS”) for descriptive and informational use only. It is not a warranty, a contract or a substitute for expert or professional advice.

Please also see the local product Safety Data Sheet for health and safety considerations.

The statements, technical information, data, and recommendations contained in this TDS are provided ‘AS IS’ and are not warranted or guaranteed in any way. They

represent typical results for the products and are based on Bostik’s research only. Since the conditions and methods of use of the products are beyond our control,

Bostik expressly disclaims any and all liability and damages of whatever kind or nature that may arise from any use of the products, the results therefrom, or reliance

on the information contain herein.

Bostik Findley (Seremban) Sdn. Bhd.


Lot 112 & 113, Kawasan Perindustrian Senawang,
70450 Seremban, Negeri Sembilan DK., Malaysia. Smart help +33 149 007 502
Phone: +606 678 9788
www.bostik.com

All advice, recommendations, figures and safety regulations provided are based on careful investigations, as well as the current state of our experience and are without obligation. Although the documentation
has been compiled with the greatest care, we do not accept any liability for inaccuracies, mistakes, typesetting or printing errors. We reserve the right to modify the respective product if we deem it necessary.
Since the design, the quality of the substrate and the processing conditions are beyond our assessment, no liability can be accepted for work performed on the basis of this documentation. We therefore advise
you to carry out practical tests on site yourself. Our general Terms and Conditions of Sale and Delivery apply to all our sales and deliveries.

You might also like