Scribd
Upload
81 views

SK100 Product Data Sheet

DIAION SK100 is a strongly acidic cation exchange resin made of styrene-DVB gel. It has high capacity and is recommended for applications like pure water manufacturing. Key specifications include a minimum salt splitting capacity of 1.85 meq/mL and particle size below 1180 and 300 microns. It can operate between 0-14 pH and 120 degrees C.

Uploaded by

atlantic.int25
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
81 views

SK100 Product Data Sheet

DIAION SK100 is a strongly acidic cation exchange resin made of styrene-DVB gel. It has high capacity and is recommended for applications like pure water manufacturing. Key specifications include a minimum salt splitting capacity of 1.85 meq/mL and particle size below 1180 and 300 microns. It can operate between 0-14 pH and 120 degrees C.

Uploaded by

atlantic.int25
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

No.

01-02-A-8501
Product Data Sheet
DIAION SK100
TM

DIAIONTM SK100 is a gel type strongly acidic cation exchange resin. It has standard cross-linkages and
excellent properties. A wide range of applications, especially in a field of manufacturing and processing
pure water, is recommended.
Product
TM
Grade Name DIAION SK100
Type Strong Acid Cation
Matrix Styrene-DVB, Gel
Functional Group Sulfonic acid
+
Ionic Form Na

Specification
Whole Bead Count - 90 min.
Salt Splitting Capacity meq/mL 1.85 min.
Water Content % 48 - 54
Particle Size Distribution on 1180 μm % 5 max.
Particle Size Distribution thr. 300 μm % 1 max.
Effective Size mm 0.40 min.
Uniformity Coefficient - 1.6 max.

Typical Properties
Shipping Density g/L 820
Mean Particle Size μm 800
Particle Density g/mL 1.25
Total Swelling (Na to H+)
+
% 9

Recommended Operating Conditions


Maximum Operating Temperature ℃ 120
Operating pH Range 0 - 14
Minimum Bed Depth mm 800
Service Flow Rate m/h 10 - 40
Regenerant HCl
H2SO4
Regenerant Concentration % HCl 4 - 10
H2SO4 1 - 4
Regenerant Level g/L 30 - 150
Regenerant Flow Rate m/h 2 - 10
Total Rince Requirement BV 2 - 10
No.01-02-A-8501
Product Data Sheet
DIAION SK100
TM

Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each
TM
meter of bed depth of DIAION SK100 resin in normal down flow operation
is shown in the graphs below.
No.01-02-A-8501
Product Data Sheet
DIAION SK100
TM

Operational Capacity Data

Notice
This information are given in good faith but without warranty, and this also applies where proprietary
rights of third parties are involved. The application, use and processing of our products are beyond
our control and therefore your own responsibility.

You might also like