Scribd
Upload
13 views4 pages

G7 Summative Final

The document provides a table of specification for a carpentry test given to 7th grade students. It outlines the modules, lessons, learning objectives, and placement of test items. The test contains 3 parts - a multiple choice section with 15 questions testing the identification of materials and tools, a true/false section with 7 questions on requisition procedures, and a classification section matching tools to their uses. The test was prepared by a teacher and approved by the head teacher to assess student learning for the first grading period of the school year.

Uploaded by

REGIN VILLASIS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
13 views4 pages

G7 Summative Final

The document provides a table of specification for a carpentry test given to 7th grade students. It outlines the modules, lessons, learning objectives, and placement of test items. The test contains 3 parts - a multiple choice section with 15 questions testing the identification of materials and tools, a true/false section with 7 questions on requisition procedures, and a classification section matching tools to their uses. The test was prepared by a teacher and approved by the head teacher to assess student learning for the first grading period of the school year.

Uploaded by

REGIN VILLASIS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Department of Education

Region VI – Western Visayas


Division of Capiz
District of Jamindan
MANUEL GANZON ADVINCULA INTEGRATED SCHOOL
Ganzon, Jamindan, Capiz

Table of Specification in T.L.E. G-7 CARPENTRY


1st Grading Periodical Test
S.Y. 2022-2023

PSSLC/ MODULE ♯ OBJECTIVE PLACEMENT OF ITEM NO. OF


ITEMS

Module 1:

Lesson 1: Identifying LO1: Identifying Materials 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 15


Materials and Tools and Tools for a Task
for a Task

Module 2:
Lesson 1: Requesting 34,35,36,37,38,39,40 7
Appropriate Materials
and Tools

Module 3: 16,17,18,19,20,21,22,23,24, 18
Checking Condition 25,26,27,28,29,30,31,32,33 10
of Tools and 41,42,43,44,45,46,47,48,49,50
Equipment

TOTAL 50

Prepared By: Approved By:


REGIN V. VILLASIS GENESIS H. VESTIDAS
TEACHER I HEAD TEACHER II

Department of Education
Region VI – Western Visayas
Division of Capiz
District of Jamindan
MANUEL GANZON ADVINCULA INTEGRATED SCHOOL
Ganzon, Jamindan, Capiz

PERIODICAL TEST IN GRADE 7- CARPENTRY

Test I. Multiple Choice


Directions: Choose the letter of the best answer.

1. Which tool/material is used for roofing?


a. plywood b. corrugated galvanized iron sheet c. gravel d. nails

2. Which is added in the mixture of cement and aggregate?


a. sand b. shovel c. water d. gravel

3. Which of the following is made of metal used for fastening woods?


a. plywood b. nails c. twister d. sand

4. Which is used to cut tie wires?


a. plumb-bob b. combination pliers c. ruler d. twister

5. Which is a fine-toothed saw used to cut metal and pipes?


a. cross-cut-saw b. ripsaw c. hacksaw d. try square

6. Which is used to cut along the grain?


a. circular saw c. claw hammer b. rip saw d. cross-cut-saw

7. Which is used for measuring long distances?


a. level bar c. plumb-bob b. push-pull-rule d. try square

8. Which is used to test the squareness of a stock?


a. try square c. pull-push-rule b. level bar d. claw hammer

9. Which is a coarse aggregate?


a. sand c. cement b. gravel d. nails

10. Which is a fine gritty, substance found in the shore and desert?
a. gravel c. water b. sand d. cement

11. Which of the following is a powdered substance which when mixed with water acts as a binder of
aggregate?
a. cement c. sand b. nails d. water Assessment

12. Which is used for vertical alignment?


a. try square c. plumb bob b. level bar d. twister

13. Which of the following tools is used in checking vertical and horizontal positions?
a. level bar c. ripsaw b. shovel d. claw hammer

14. Which is used for mixing aggregate, cement and water?


a. shovel c. hacksaw b. cement d. nails

15. Which is used for cutting across the grain?


a. push-pull-rule c. twister b. combination pliers d. cross-cut-saw

16. Which entries of the requisition form should be written next to the suggested project?
A. balance on hand C. materials and description B. date of requisition D. unit price

17. How many steps are required in the accomplishment of the requisition form?
A. 2 B. 4 C. 6 D. 7
18. Which is the sixth step in accomplishing the requisition form?
A. Write your name as a requisitioner.
B. Write the number of required materials.
C. List the unit of materials to be requisitioned.
D. State the name of the project and date when you requested for materials.

19. What is the next step after listing the unit of materials to be requisitioned?
A. List the cost per unit and the total cost.
B. List the unit of materials to be requisitioned.
C. Enumerate the materials with their description.
D. Fill in the classification of the project and its purpose.

20. Which is the 7th step in accomplishing the requisition form?


A. Write your name as requisitioner. B. Write the number of required materials. C. Secure the approval of
the supply officer. D. List the unit of materials to be requisitioned.

21. Vinz wants to have 5 liters of paint in his suggested project. In what part of the requisition form is
liters written?
A. Balance on hand C. Requisition unit B. Materials and description D. Total

22. Which is the second step to consider in accomplishing the requisition form?
A. Write the number of required materials. B. List the cost per unit and the total cost. C. Write your name
as requisitioner. D. Enumerate the materials with their description.

23. Which is the fourth step involved in requesting materials and tools?
A. Write your name as requisitioner. B. List the cost per unit and the total cost. C. Write the number of
required materials. D. Enumerate the materials with their description.

24. Which is used for sharpening edge cutting tools such as chisel?
a. saw set b. oil stone c. nail set d. files

25. Which is used to measure a work piece?


a. marking gauge b. try square c. meter stick d. ruler

26. Which is used for transfer measurement?


a. plumb bob b. divider c. pencil d. caliper

27. Which is used to layout or mark cutting lines?


a. chalk line b. pencil c. marking gauge d. steel square

28. Which is used to scribe arcs and circle in the metal wood?
a. compass b. divider c. marking gauge d. steel square

29. Which is used in squaring, measuring, and testing the squareness of a wood?
a. cabinet scraper b. spirit level c. try square d. steel square

30. Which is an example of portable power tool which is used for sanding furniture?
a. jigsaw b. spirit level c. circular saw d. sander

31. Which is used to drive and pull out nails on wooden surface?
a. claw hammer b. screwdriver c. cabinet scraper d. mallet

32. Which is used to protect the eyes against flying debris and harmful liquids?
a. apron b. face mask c. goggles d. ear protector

33. It is used to drive and loose screws?


a. apron b. claw hammer c. screwdriver d. nail set

TEST II. TRUE OR FALSE


Directions: Write TRUE if the steps are included in the requisition form procedure and FALSE if it is
not. Write your answers on the blank.
__________ 34. Write the number of required materials.

.__________ 35. Do not list the cost per unit and the total cost.

__________ 36. Write the number of required materials in the balance on hand.

__________ 37. Enumerate the materials excluding their description.

__________ 38. Secure the approval of the supply officer.

__________ 39. Specify the quantity of the materials to be acquired.

__________ 40. State the name of the project and date when you requested for materials

TEST III. Directions: Classify the different types of tools and materials according to its uses.

41. Cross Cut Saw


42. Compass Saw
43. Marking Gauge
44. Chalk Line
45. pull push rule
46. back saw
47. steel square
48. spoke shave
49. bar clamp
50. Bench Vise

You might also like