alchimica.

com

Page 1/3

HYPERDESMO®-ADY 610

One component, non-yellowing, elastic, polyurethane liquid

membrane

DESCRIPTION LIMITATIONS
HYPERDESMO®-ADY 610 is a fully aliphatic, one Not recommended for:
component, polyurethane liquid membrane. Upon Unsound substrates.
curing, it produces a tough but highly elastic non- Waterproofing of swimming pool surfaces in
yellowing membrane. The product has been contact with chemically treated water.
developed in order to offer a solution when
application requires color stability but also FEATURES & BENEFITS
application in one coat. This application in one • Excellent weather and UV resistance, no
coat is an excellent way to save on labor but also yellowing (it is fully aliphatic).
to minimize errors that occur with multi-layer • Low viscosity
applications due primarily to inter-adhesion • Excellent mechanical properties, high elasticity,
failures. tensile and tear strength.
HYPERDESMO®-ADY 610 is self-levelling, with a • Highly hydrophobic.
good viscosity profile over a large temperature • Excellent chemical and hydrolysis resistance.
range that will cure to form a bubble free
membrane that is recommended to be applied in APPLICATION PREREQUISITES
only one coat.
Can be successfully applied on:
The product will retain its color stability even
Concrete/steel reinforced concrete or otherwise,
when applied in dark colors, and especially when
fibrous cement, mosaic, cement roof tiles, old
applied white it will have excellent solar
(but well adhered) acrylic and asphalt coats,
reflectance for many years.
wood, corroded metal, and galvanized steel. For
information about other substrates, please contact
Apply using brush, roller or airless spraying.
our tech department.
Consumption: 1,5 – 2 Kg/m2

Concrete substrate conditions (standard):

COMPLIANCE - CERTIFICATION • Hardness: R28 = 15Mpa.
HYPERDESMO®-ADY 610 is CE certified as part • Humidity: W < 10%.
of the HYPERDESMO® System, offering • Temperature: 5-35 oC.
increased UV resistance and colour protection. • Relative humidity: < 85%.

RECOMMENDED FOR Primer selection for special conditions and

• roofs, substrates:
• verandas and balconies, Please refer to the Primer Selection Table.
• polyurethane insulation foams,
• light roofing made of metal or fibrous cement, APPLICATION PROCEDURE
• gypsum and cement boards, Clean the surface using a high-pressure washer, if
• asphalt and EPDM membranes. possible. Remove oil, grease and wax
contaminants. Cement laitance, loose particles,

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & ISO 45001.
HYPERDESMO®-ADY 610 /EE/09-02-2018
 alchimica.com

Page 2/3

HYPERDESMO®-ADY 610

mould release agents, cured membranes must be CLEANING

removed. Fill surface irregularities with Clean tools and equipment first with paper towels
appropriate products. and then using SOLVENT-01. Rollers will not be
re-usable.
Priming:
Apply the required primer following the guidelines PACKAGING
above.
1 kg, 6 kg and 15 kg drums.

Mixing:
SHELF LIFE
Use a low speed (300 rpm) mixer. Add SOLVENT-
Can be kept for minimum 12 months in the
01 10% for application by spraying.
original unopened pails in dry places and at
temperatures of 5-25 oC. Once a pail has been
Application:
opened, use as soon as possible.
By brush, roller or airless spraying.If applied in
sequel layers, do not exceed 48 hours between
coats. SAFETY INFORMATION
Contains volatile flammable solvents. Apply in
well-ventilated, no smoking areas, away from
CONSUMPTION
naked flames. In closed spaces use ventilators
Minimum consumption: 1.5 kg/m2.
and carbon active masks. Keep in mind that
solvents are heavier than air so they creep on the
floor. The MSDS (Material Safety Data Sheet) is
available on request.

TECHNICAL SPECIFICATIONS

In liquid form:

PROPERTY UNITS METHOD SPECIFICATION

Viscosity (BROOKFIELD) cP ASTM D4287, @ 25 oC 1,000-3,000

ASTM D1475 / DIN 53217 / ISO 2811,

Specific weight gr/cm3 1.3-1.4
@ 20 oC
Tack free time, @ 77 oF (25 oC)
hours - 6-12
& 55% RH

Recoat time hours - 24

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & ISO 45001.
HYPERDESMO®-ADY 610 /EE/09-02-2018
 alchimica.com

Page 3/3

HYPERDESMO®-ADY 610

Cured membrane:

PROPERTY UNITS METHOD SPECIFICATION

Service temperature oC - -40 to 90

Max. temperature short time o

C - 200
(shock)

Hardness Shore A ASTM D2240/DIN 53505 / ISO R868 80

Kg/cm2 90
Tensile strength at break @ 23oC ASTM D412/ EN-ISO-527-3
(N/mm2) (9)

Percent elongation @ 23 oC % ASTM D412/ EN-ISO-527-3 > 600

Thermal resistance (100 days @

- EOTA TR011 passed
80 oC)
QUV Accelerated Weathering passed
- ASTM G53
Test (2000 hours)

NONE OF OUR PUBLISHED INSTRUCTIONS AND SPECIFICATIONS, IN WRITING OR OTHERWISE, ARE BINDING EITHER IN GENERAL OR
WITH RESPECT TO ANY THIRD PARTY RIGHTS, OR DO THEY RELIEVE INTERESTED PARTIES OF THEIR DUTY TO SUBJECT THE PRODUCT TO
AN ADEQUATE EXAMINATION OF ITS SUITABILITY. IN NO EVENT WILL ALCHIMICA S.A. BE RESPONSIBLE FOR DAMAGES OF ANY NATURE,
WHATSOEVER, RESULTING FROM THE USE OF OR RELIANCE UPON INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.
ALCHIMICA S.A. RESERVES THE RIGHT TO CHANGE AT ANY TIME THE PROPERTIES OF ITS PRODUCTS. PLEASE REFER TO THE CURRENT
VERSION OF THE TECHNICAL DATA SHEET, AVAILABLE FROM OUR WEB SITE WWW.ALCHIMICA.COM

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & ISO 45001.
HYPERDESMO®-ADY 610 /EE/09-02-2018