Scribd
Upload
45 views

USB Driver Installation Guide

This document provides instructions for installing a USB driver and identifying the communication port number for a spectrophotometer. It involves: 1. Connecting the USB cable from the spectrophotometer to the PC. The PC will detect new hardware and prompt to install a driver. Select to install from a list or location and select the provided USB driver disk. 2. Opening the device manager to identify the COM port number assigned to the spectrophotometer USB driver under "Ports (COM & LTP)". This number should be input into the spectrophotometer software. 3. Clicking finish to complete the USB driver installation process. The communication port number is then available for use by the spectroph

Uploaded by

rogerbaldissera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

USB Driver Installation Guide

This document provides instructions for installing a USB driver and identifying the communication port number for a spectrophotometer. It involves: 1. Connecting the USB cable from the spectrophotometer to the PC. The PC will detect new hardware and prompt to install a driver. Select to install from a list or location and select the provided USB driver disk. 2. Opening the device manager to identify the COM port number assigned to the spectrophotometer USB driver under "Ports (COM & LTP)". This number should be input into the spectrophotometer software. 3. Clicking finish to complete the USB driver installation process. The communication port number is then available for use by the spectroph

Uploaded by

rogerbaldissera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

USB Driver Installation Guide

1, Installing USB Driver Under Windows XP Operating System


1) Connect one end of the USB cable provided with the spectrophotometert to the USB
port on the spectrophotometer.
2) Connect the other end of the USB cable to the PC. The system will detect a new
hardware. The following dialog box will pop up.

3) Select Item “No. not this time”, then click “Next” button to display the following:
4) Select “Install from a list or specific location (Advanced)”, then click “ Next”

5) Insert the provided USB driver disk into the CD-ROM of your PC. Select “Search
removable media (floppy, CD-ROM…)” item, then click “Next”. The following
window pops up.
6) Wait for the installation to finish.

7) Click “Finish” to close the wizard.


The USB driver installation is finished by now.

2. Finding the communication port used by USB


1) Right-click “My Computer” Icon on the desktop, then select “Properties” to display
the following window.
2) Click “Hardware” to display the following.

3) Click “Device Manager” button to display the following window.

Click at item “Ports (COM & LTP)” and find item “Silicon Labs…..(COM?)” as shown in
the above figure. The COM port number (as “COM3” in the figure) is displayed. This
port number should be input later as the communication port No. in the
spectrophotometer PC control software “UVSoftware”.

You might also like