CORE-BBS-ENGINEERING/CORE

TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

DyCE/RE/BBS acting for and on behalf of The President of India invites E-Tenders against Tender No RE-SBC-CIVIL-20-21-2 Closing
Date/Time 04/06/2020 15:00 Hrs. Bidders will be able to submit their original/revised bids upto closing date and time only. Manual offers are not
allowed against this tender, and any such manual offer received shall be ignored.

Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through only payment
modes available on IREPS portal like net banking, debit card, credit card etc. Manual payments through Demand draft, Banker cheque, Deposit
receipts, FDR etc. are not allowed.

1. NIT HEADER

Proposed construction of Three No.s of TSS including Earth Work, retaining wall, watering
arrangements, three No.s of OHE &PSI Depot and three No.s of Tower Wagon Shed with siding
in between Chikbanavar- Arsikere Section in Banglore & Mysore Division of South Western
Name of Work Railway. [ A ] At DODBELE station (DBL) 1No. TSS, 1No. OHE & PSI Depot, 1 No T.W.Shed with
siding. [ B ] At NITTUR Station (NTR) 1No. TSS, 1No.OHE & PSI Depot 1No. T.W.Shed with
siding. [ C ] At HONNAVALLI ROAD (HVL) 1No. TSS [ D ] At ARSIKERE Jn. (ASK) 1 No. OHE &
PSI Depot and 1 No. T.W.Shed with siding of Group-259.
Bidding type Normal Tender
Tender Type Open Bidding System Single Packet System
Tender Closing Date Time 04/06/2020 15:00 Date Time Of Uploading Tender 06/05/2020 17:35
Pre-Bid Required No Pre-Bid Query Date Time Not Applicable
Advertised Value 41280232.56 Tendering Section ENGNEERING
Bidding Style Single Rate for Each Schedule Bidding Unit
Earnest Money (Rs.) 356400.00 Validity of Offer ( Days) 45
Tender Doc. Cost (Rs.) 10000.00 Period of Completion 18 Months
Contract Type Works Contract Category Expenditure
Are Joint Venture (JV) firms allowed
Bidding Start Date 21/05/2020 No
to bid
Ranking Order For Bids Lowest to Highest Expenditure Type Capital (Works)

2. SCHEDULE

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Above/
Schedule A-Execution of works under USSOR-2011 23672770.15
Below/Par
Please see Item Breakup for details. 23672770.15 AT Par 23672770.15
1
Description:- Execution of all items as per Schedule-A

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Above/
Schedule B-Execution of cement item under USSOR-2011 6407629.80
Below/Par
Please see Item Breakup for details. 6407629.80 AT Par 6407629.80
2
Description:- Execution of all items as per Schedule-B

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Above/
Schedule C-Execution of reinforcement for RCC work under USSOR-2011 4485745.60
Below/Par
Please see Item Breakup for details. 4485745.60 AT Par 4485745.60
3
Description:- Execution of all items as per Schedule-C

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Above/
Schedule D-Execution of items not covered under Sch-A,B & C under USSOR-2011. 2500000.00
Below/Par
Lump Sum 2500000.00 AT Par 2500000.00
Description :- Execution of works covered under South Western Railway Unified Standard Schedule of Rates 2011
4 (Works & Materials) of Engineering Department including any other items not covered in the schedules- A,B & C of this
tender. NOTE:- No claim on this account will be admissible due to non-operation of Schedule-"D" F or items to be
operated in schedule-D, the note/sub-note of USSOR '2011 and specification contained in "Indian Railway Unified
Standard Specification-10 Vol.I & Vol-II" will be applicable.

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Above/
Schedule E-Execution of NS items under schedule-E 4196645.01
Below/Par

Pa g e 1 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

Please see Item Breakup for details. 4196645.01 AT Par 4196645.01

5
Description:- Execution of all items as per Schedule-E

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Above/
Schedule F-Execution of Elect. items under Schedule-F 17442.00
Below/Par
Please see Item Breakup for details. 17442.00 AT Par 17442.00
6
Description:- Execution of all elect. items as per Schedule-F

3. ITEM BREAKUP

Schedule Schedule A-Execution of works under USSOR-2011

Item- 1 Execution of all items as per Schedule-A
S No. Item Description of Item Unit Qty Rate Amount
No
1 011011 Earth work in excavation as per approved drawings and dumping at cum 2555.00 109.06 278648.30
embankment site or spoil heap, within railway land, including 50m
lead and 1.5m lift, the lead to be measured from the centre of
gravity of excavation to centre of gravity of spoil heap: the lift to be
measured from natural ground level and paid for in layers of 1.5m
each, including incidental work, as per specifications-in All kinds of
soils
2 011070 Extra for every additional lift of 1.5m or part thereof, after the initial cum 150.00 10.48 1572.00
1.5m, for earth work in all soils
3 012010 Extra over item 011010 for excavation in foundations for buildings cum 1740.00 10.70 18618.00
and bridges to cover dressing to neat dimension and plumbing
sides etc. Note : Dressing under this item is payable for the total
quantity of excavation in foundation and not partly
4 012030 Extra for watering and ramming earth in foundation and floors in cum 1275.00 20.20 25755.00
15cm layers. Note : This item is payable where ramming is not
included in the original rate for earthwork in filling.
5 012040 Filling, watering and ramming earth in 15 cm layers in floors and cum 1460.00 24.30 35478.00
foundations with surplus earth from foundations including 50m lead
and 1.5m lift
6 012050 Supplying and filling sand in plinth and under floors including cum 126.00 850.26 107132.76
watering, ramming, consolidating and dressing complete
7 013120 Earthwork in filling in embankment, guide bunds, around buried cum 13900.00 112.10 1558190.00
type abutments, bridge gaps, trolley refuges, rain bunds if provided,
platforms etc. with earth excavated from outside railway boundary
entirely arranged by the contractor at his own cost
8 013130 Extra for mechanical compaction of earth/ blanketing material filled cum 13900.00 11.37 158043.00
in embankment with contractor's rollers of suitable capacity, type
and size to achieve specified density as per specification, testing as
per IS codes incl. cost of water, T&P consumable
9 021150 Leading miscellaneous materials such as iron work, rails, fittings & MT 141.00 160.31 22603.71
fastenings, pipes, wooden logs, stones over pitching stone size,
RCC/PCC beams / slabs etc and all similar articles (each individual
article or bundle being not more than 3.5 metres lo
10 021151 Additional lead for every subsequent km or part thereof, over 10 km MT/Km 2421.00 7.25 17552.25
and upto 100 km over item no. 021150
11 021510 Hiring of JCB Machine (in good working condition) for leveling and Hour 66.00 864.01 57024.66
dressing ground / dismantling structures including disposal of
debris through dumpers etc. with contractor's labour, JCB machine,
machine operator, fuel, etc. The contractor shall arrange
12 031012 "Providing and laying in position cement concrete of specified cum 788.00 1869.47 1473142.36
proportion excluding cost of cement, centering and shuttering - All
works upto Plinth level 1:3:6 (1 cement : 3 sand : 6 graded stone
aggregate 40mm nominal size) : "
13 031023 Providing and laying cement concrete, up to plinth in retaining cum 120.00 2350.75 282090.00
walls, walls (any thickness) including attached plasters, columns,
pillars, posts, struts, buttresses, string or lacing courses, parapets,
coping, bed blocks, anchor blocks, plain window sil 1:2:4 (1 cement
: 2 sand : 4 graded stone aggregate 20mm nominal size)

Pa g e 2 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

14 041011 Providing and laying in position M 20 Grade concrete for reinforced cum 628.00 2588.86 1625804.08
concrete structural elements but excluding cost of centering,
shuttering, reinforcement and Admixtures in recommended
proportion (as per IS:9103) to accelerate, retard setting of
concrete. All work upto plinth level, including raft foundation of
washable aprons, HS tank, pile cap, footings of FOB, and Platform
shelter etc.
15 041012 Providing and laying in position M 20 Grade concrete for reinforced cum 396.00 2844.03 1126235.88
concrete structural elements but excluding cost of centering,
shuttering, reinforcement and Admixtures in recommended
proportion (as per IS:9103) to accelerate, retard setting of
concrete. All work in buildings above plinth level upto floor two level.
16 042011 " Centering and shuttering including strutting, propping etc. and Sqm 780.00 124.10 96798.00
removal of form for : Foundations, footings, bases of columns, raft
foundation of washable aprons, Pile caps, Footings of FOB etc. "
17 042012 Walls (any thickness) including attached plasters, buttresses, plinth Sqm 1873.00 233.50 437345.50
and string courses etc.
18 042013 " Centering and shuttering including strutting, propping etc. and Sqm 1020.00 248.05 253011.00
removal of form for Suspended floors, roofs, landings, balconies,
FOB slabs, walkway slabs and access plat form "
19 042014 " Centering and shuttering including strutting, propping etc. and Sqm 1221.00 208.65 254761.65
removal of form for Lintels, beams, plinth beams, bed blocks,
girders, bressumers and cantilevers "
20 042015 "Centering and shuttering including strutting, propping etc. and Sqm 1080.00 296.50 320220.00
removal of form for Columns, pillars, posts and struts "
21 042025 Centering and shuttering including strutting, propping etc. and Sqm 684.00 79.90 54651.60
removal of form for special shapes Edges of slabs and beams in
floors and walls under 20 cm wide
22 042029 "Centering and shuttering including strutting, propping etc. and Sqm 651.00 357.35 232634.85
removal of form for special shapes Weather shade, Chajjas,
corbels etc. including edges "
23 043015 Precast RCC m20/25 mix in cover slabs cum 7.50 3030.35 22727.63
24 051015 Brick work with non-modular (FPS) bricks of class designation 7.5 cum 63.00 2328.48 146694.24
in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 fine
sand)
25 051040 Extra over item 051010 & 051020 for brick work in superstructure cum 51.00 184.51 9410.01
beyond plinth level upto floo rtwo
26 056044 Cement Concrete Solid Block Masonry in foundation and plinth cum 933.00 3385.45 3158624.85
with:(factory made blocks) in Cement mortar 1:6 (1cement: 6 fine
sand)
27 056050 Extra over Item 056040 for Cement Concrete Solid Block masonry cum 813.00 570.47 463792.11
in superstructure above plinth level upto floor two level.
28 057103 Add or deduct from rates of brickwork when the bricks specified or cum 51.00 483.79 24673.29
permitted to be used by Engineer are of Class designation other
than 7.5 - Deduct for Class designation 5
29 061014 Random rubble masonry with hard stone in foundation and plinth cum 850.00 1982.42 1685057.00
including levelling up with concrete as per specifications, upto plinth
level with : Cement mortar 1:6 (1cement: 6 fine sand)
30 072152 Providing and fixing flush door shutters to IS: 2202 Part-I non- Sqm 51.00 926.51 47252.01
decorative type, core of block board construction with frame of 1st
class hard wood and well matched commercial 3ply veneering with
vertical grains or cross bands and face veneers on both face 30mm
thick including ISI marked stainless steel butt hinges with necessary
screws
31 072170 Extra for providing lipping with 2nd class teak wood battens 25mm Sqm 39.00 341.48 13317.72
minimum depth on all edges of shutters (over all area of door
shutters to be measured)
32 074232 Providing and fixing M.S. grills of required pattern in frames of Kg 5550.00 82.53 458041.50
windows etc. with M.S. flats, square or round bars etc. all complete
Fixed to opening/ wooden frames with rawl plugs screws etc
33 074280 Providing 40x5mm flat iron hold fast 40cm long including fixing to Each 84.00 71.21 5981.64
frame with 10mm diameter bolts, nuts and wooden plugs and
embeddings in cement concrete block 30x10x15cm 1:3:6 mix
(1cement: 3coarse sand: 6graded stone aggregate 20mm nominal
size)

Pa g e 3 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

34 075052 Providing and fixing M.S. sliding door bolts generally conforming to Each 45.00 87.43 3934.35
IS: 281, bright satin finish or black stone enamelled with nuts and
screws etc. complete of size 250x16 mm
35 075061 Providing and fixing M.S. tower bolts generally conforming to IS:204 Each 45.00 63.60 2862.00
(Part I) with necessary screws etc. complete of size. 250x10 mm
36 075062 Providing and fixing M.S. tower bolts generally conforming to IS:204 Each 27.00 51.54 1391.58
(Part I) with necessary screws etc. complete of size. 200x10 mm
37 075071 Providing and fixing M.S. door handles with necessary screws etc. Each 54.00 20.28 1095.12
complete. 125mm long.
38 078017 Providing and fixing ISI marked aluminium butt hinges ISI marked Each 36.00 46.86 1686.96
anodised (anodic coating not less than grade AC 10 as per IS:
1868) transparent or dyed to required colour or shade with
necessary screws etc. complete 75x63x3.2mm
39 078022 Providing and fixing aluminium sliding door bolts ISI marked Each 12.00 126.13 1513.56
anodised (anodic coating not less than grade AC 10 as per IS:
1868) transparent or dyed to required colour or shade with nuts
and screws etc. complete 250x16mm
40 078035 Providing and fixing aluminium tower bolts ISI marked anodised Each 24.00 36.65 879.60
(anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with necessary
screws etc. complete 100x10mm
41 078062 Providing and fixing aluminium handles ISImarked anodised Each 24.00 40.64 975.36
(anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with ecessary
screws etc. complete. 100mm
42 078071 Providing and fixing aluminium hanging floor door stopper ISI Each 27.00 29.24 789.48
marked anodised (anodic coating not less than grade AC 10 as per
IS: 1868) transparent or dyed to required colour and shade with
necessary screws etc. complete Single rubber stopper.
43 078310 Providing and fixing of fibre glass reinforced plastic (FRP) door RM 60.00 497.83 29869.80
frames of three legged of crosssection 90 mm x 45 mm having
single rebate of 32 mm x 15 mm to receive shutter of 30 mm
thickness. The laminate door frame moulded with fire retardant
grade
44 078320 Providing and fixing 30 mm thick glass fibre reinforced (FRP) Sqm 19.50 2984.34 58194.63
panelled door shutter of required colour and approved brand and
manufacture, made with fire retardant grade unsaturated polyester
resin, moulded to 3 mm thick FRP laminate for farming hollow r
45 081011 Structural steel work in single section including cutting, bending, Kg 10500.00 57.20 600600.00
straightening, drilling, rivetting, bolting, hoisting, fixing in position,
including applying a priming coat of approved steel primer,
complete - upto 6m height above GL In RSJ, tees, angles and
channels
46 081031 Structural steel work welded in built up sections, trusses and Kg 5850.00 61.73 361120.50
framed work, girders, staging's, racks, etc including cutting,
bending, straightening, hoisting, fixing in position, including applying
a priming coat of approved steel primer, complete - upto In RSJ,
tees, angles and channels
47 081032 Structural steel work welded in builtup sections, trusses and framed Kg 1830.00 61.71 112929.30
work, girders,stagings,racks,etc including cutting, bending,
straightening, hoisting, fixing in position, including applying a
priming coat of approved steel primer, complete - upto In flats,
plates , round or square bars
48 081140 Supplying and fixing lewis/ holding down bolts ofapproved design Kg 150.00 63.54 9531.00
with nuts and washers complete
49 081201 Providing and fixing 1mmthick M.S.sheet door shutter with frame of Sqm 16.56 2153.55 35662.79
40x40x6mm angle iron and 3mmM.S.gusset plate satthe junctions
and corners, all necessary fittings complete, including applying a
priming coat of approved steel primer Using M.S. angles
40x40x6mm for diagonal braces
50 081211 Supplying and fixing rolling shutters of approved make as per IS Sqm 160.80 2391.72 384588.58
6248, made of required size M.S. laths interlocked together through
their entire length and jointed together at the end by end locks
mounted on specially designed pipe shaft with brackets,
80x1.25mm M.S. laths with 1.25mm thick top cover
51 081220 Providing and fixing ball bearing for rolling shutters Each 36.00 405.97 14614.92

Pa g e 4 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

52 081231 Extra for providing mechanical device chain and crank operation for Sqm 36.00 596.45 21472.20
operating rolling shutters. Exceeding 10.00Sqm and upto 16.80
Sqm. in the area
53 081232 Extra for providing mechanical device chain and crank operation for Sqm 66.00 586.79 38728.14
operating rolling shutters Exceeding 16.80 Sqm in area
54 081281 Providing and fixing pressed steel door frames manufactured from Metre 142.50 372.07 53019.98
commercial mild steel sheet of 1.25mm thickness including hinges
jamb, lock jamb, bead and if required angle threshold of mild steel
angle of section 50x25mm, or base ties of 1.25mm pressed Profile-
A (105x60mm) Single rebate
55 082011 Providing and fixing anodised aluminium work for doors, windows, Kg 600.00 299.91 179946.00
ventilators and partitions with extruded built up standard tubular
and other sections of approved make conforming to IS:733 and
IS:1285, anodised transparent or dyed to required shade according
to IS:1868 (Minimum anodic coating of grade AC 15), fixed with
rawl plugs and screws or with fixing clips, or with expansion hold
fasteners including necessary filling up of gaps at junctions, at top,
bottom and sides with required PVC/neoprene felt etc. Aluminium
sections shall be smooth, rust free, straight, mitered and jointed
mechanically wherever required including cleat angle. Aluminium
snap beading for glazing/ panelling, C.P. brass/stainless steel
screws, all complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing and panelling to be paid
for separately) For openable/sliding portions and fixing hinges /
pivots, PVC/ neoprene gasket required and making provision for
fixing of fittings. (Fittings shall be paid for separately) For Fixed
portion
56 082012 For openable portion Kg 210.00 312.10 65541.00
57 082031 Providing and fixing glazing in aluminium door, window, ventilator Sqm 186.00 759.14 141200.04
shutters and partitions etc.with PVC/neoprene gasket etc. complete
as per the architectural drawings and the directions of engineer-in-
charge.(Cost of aluminium snap beading shall be pa With float/
frosted glass pane sof 4mm thickness(weight not less than 10.0
kg/sqm)
58 091090 Laying cement concrete 1:2:4 (1cement: 2coarse sand: 4graded cum 72.00 2678.26 192834.72
stone aggregate 20mm nominal size) of thickness 40 to 100mm as
under layer of flooring
59 092011 Cement concrete flooring 1:2:4 (1cement: 2coarse sand: 4graded Sqm 875.00 114.81 100458.75
stone aggregate) finished with a floating coat of neat cement
including cement slurry, but excluding the cost of nosing of steps
etc. 25mm thick with 12.5mm nominal size stone aggregate.
60 094071 Providing and fixing 10mm thick heavy duty acid and/or alkali Sqm 36.00 863.54 31087.44
resistant factory made tiles conforming to Group V-RD series of
approved make and colour using acid and/or alkali resisting mortar
bedding and joints filled with acid and/or alkali resisting cement as
per IS: 4457 complete including cost of acid/alkali resistant cement
In flooring on a bed of 10mm thick mortar 1:4 (1 Appropriate
cement : 4 coarse sand)
61 094072 Providing and fixing 10mm thick heavy duty acid and/or alkali Sqm 66.00 936.65 61818.90
resistant factory made tiles conforming to Group V-RD series of
approved make and colour using acid and/or alkali resisting mortar
bedding and joints filled with acid and/or alkali resisting cement as
per IS: 4457 complete including cost of acid/alkali resistant cement
In dado/skirting on 12mm thick mortar 1:4 (1 Appropriate cement :
4 coarse sand)
62 095012 Providing and fixing Ist quality ceramic tiles conforming to Group B- Sqm 156.00 623.39 97248.84
III (Ceramic Wall Tiles) of IS:15622 of manufacturers approved by
railway in all colours, shades, and design as approved by the
Engineer-in- Charge in skirting, risers of steps and dado over
12mm thick bed of cement mortar 1:3 (1cement: 3coarse sand)
including pointing in white cement mixed with pigment of matching
shade complete 200x300 mm

Pa g e 5 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

63 095021 Providing and fixing ceramic tiles conforming to IS:15622 of Sqm 39.00 566.24 22083.36
manufacturers approved by railway in all colours, shades, design
and abrasion resistance class as approved by the Engineer-in-
Charge in floors and landings over 20mm thick bed of cement
mortar 1:4 (1cement: 3coarse sand) including pointing in white
cement mixed with pigment of matching shade complete Of Group
B-II Clause 5.1 (for abrasion resistance) of IS:15622 (Ceramic
Floor Tiles) of size 300x300mm
64 095026 Providing and fixing ceramic tiles conforming to IS:15622 of Sqm 363.00 975.79 354211.77
manufacturers approved by railway in all
colours,shades,designandabrasionresistanceclassasapprovedbythe
Engineer-in-Charge in floors and landings over 20mm thick bed of
cement mortar 1 OfGroupB-I-a of IS:15622 (Vitrifiedtiles) of size
above 400x400mm upto 600x600 mm
65 101080 Supply & installation of precoated galvanized iron profile sheets Sqm 1125.00 436.69 491276.25
(size, shape and pitch of corrugation as approved by Engineer-
incharge) 0.50mm +/- 5% total coated thickness (TCT) thick Zinc
coating 120gsm as per IS:277 in 240mpa steel grade, 5-7microns
epoxy primer on both side of the sheet and polyester top coat 15-
18 microns. Sheet should have protective guard film of 25 microns
minimum to avoid scratches while transportation and should be
supplied in single length upto 12 metre or as desired by Engineer-
in-charge. The sheet shall be fixed using self drilling / self tapping
screws of size (5.5 x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen
and G.I. limpet washers or with G.I. limpet washers filled with white
lead complete upto any pitch in horizontal/vertical or curved
surfaces excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required
66 101091 Providing and fixing precoated galvanised steel sheet roofing Metre 120.00 259.99 31198.80
accessories 0.50mm +/- 5% total coated thickness (TCT) thick Zinc
coating 120 gsm as per IS:277 in 240mpa steel grade, 5-7 microns
epoxy primer on both side of the sheet and polyester top coat 15-
18 microns using self drilling/self tapping screws or with polymer
coated J or L hooks, bolts and nuts and or G.I. seam bolts and
nuts, G.I. plain and bitumen washers complete :
67 111012 12 mm cement plaster of mix - 1:6 (1cement: 6fine sand) Sqm 7245.00 75.31 545620.95
68 111022 15 mm cement plaster on the rough side of single or half brick wall Sqm 180.00 86.69 15604.20
of mix - 1:6 (1cement: 6 fine sand)
69 111110 18mm cement plaster in two coats under layer12mm thick cement Sqm 3870.00 115.60 447372.00
plaster1:5(1cement:5coarsesand) finished with atoplayer 6mm thick
cement plaster 1:6 (1cement: 6fine sand)
70 111151 Cement plaster to ceiling of mix - 6 mm thick 1:3 (1cement: 3 fine Sqm 930.00 64.43 59919.90
sand)
71 112040 Providing and applying plaster of paris putty of 2mm average thick Sqm 1800.00 81.94 147492.00
ness over plastered surface to prepare the surface even and
smooth complete
72 114041 Pointing on stone work with cement mortar 1:3 (1cement: 3fine Sqm 1845.00 84.82 156492.90
sand) Flush/ Ruled pointing
73 115011 White washing with lime to give an even shade New work (three or Sqm 1565.00 9.83 15383.95
more coats
74 115042 Distempering with oil bound washable distemper of approved brand Sqm 3030.00 65.81 199404.30
and manufacture to give an even shade New work (two or more
coats of distemper) over and including priming coat with distemper
primer
75 115160 Finishing walls with Acrylic Smooth exterior paint with Silicone Sqm 3690.00 66.89 246824.10
additives of required shade on new work (Two or more coats
applied @ 1.67ltr/10 sqm over and including one coat of water
proofing cement paint applied @ 2.20 kg/10sqm.
76 121011 "Applying Priming Coat :With ready mixed pink or grey primer of Sqm 132.00 23.95 3161.40
approved brand and manufacture on woodwork (hard and soft
wood) "
77 121014 Applying Priming Coat With ready mixed red oxide zinc chromate Sqm 780.00 10.88 8486.40
primer of approved brand and manufacture on steel work (second
coat)

Pa g e 6 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

78 121150 Painting two coats (excluding priming coat) with chocolate, red, Sqm 912.00 48.55 44277.60
grey or buff ready mixed paint of approved quality, on steel or wood
work
79 131083 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, Metre 120.00 164.34 19720.80
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings including fixing the pipe with
clamps at 1.00m spacing. This includes jointing of pip 25mm
nominal outer dia. Pipes
80 131092 Providing and fixing Chlorinated Polyvinyl Chloride having thermal Metre 45.00 188.72 8492.40
stability for hot & cold water supply including all CPVC plain & brass
threaded fittings including fixing the pipe with clamps at 1.00m
spacing in This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction
of Engineer-in-Charge. Concealed work including cutting chases
and making good the walls 20mm nominal outer dia. Pipes(CPVC)
pipes,
81 131103 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, Metre 180.00 147.27 26508.60
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings. This includes jointing of pipes
& fittings with one step CPVC solvent cement, trenching, refilling
and testing of joints complete as per direction of Engineer-in-
Charge. External work 25mm nominal outer dia. Pipes
82 131192 Providing and fixing PP-R Brass Ball Valve fusion welded, having Each 12.00 564.37 6772.44
thermal stability for hot & cold water supply and testing of joints
complete as per direction of engineer in charge 25mm Ball Valve
83 132011 Providing and fixing brass bib cock of approved quality 15 mm Each 21.00 148.74 3123.54
nominal bor
84 132021 Providing and fixing brass stop cock of approved quality 15 mm Each 9.00 160.01 1440.09
nominal bore
85 136150 Providing and placing on terrace/staging (at all heights) Litre 9000.00 15.72 141480.00
polyethylene water storage tank ISI : 12701 marked with cover and
suitable locking arrangement and making necessary holes for inlet,
outlet and overflow pipes but without fittings and the base sup
86 151011 Providing and fixing water closet squatting pan (Indian type W.C. Each 9.00 2236.12 20125.08
pan) with 100mm sand cast iron P or S trap, 10litre low level white
P.V.C. flushing cistern with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings and f White Vitreous
China Orissa pattern W.C. pan of size 580x440-mm with integral
type foot rests
87 151073 "Providing and fixing wash basin with C.I./ M.S. brackets, 15mm Each 6.00 1574.69 9448.14
C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern,
including painting of fittings and brackets, cutting and making good
the walls wherever required white vitreous china wash basin size
550x400mm with a pair of 15mm C.P. brass pillar taps "
88 152090 Providing and fixing 100mm sand cast iron grating for gully, trap Each 9.00 18.65 167.85
89 152123 Providing and fixing mirror of 5.5 mm thickness of float Glass (of Each 6.00 774.00 4644.00
approved Quality) required shape and size with plastic moulded
frame of approved make and shade with 6mm thick hard board
backing Oval shape 450x350mm (outer dimension)
90 153390 Providing and fixing Shower rose (C.P.) brass with swivel joint Each 6.00 323.65 1941.90
having aprox. wt. 270 gm
91 153410 Providing and fixing Towel rail (C.P.)brass15 mm dia x 600 mm Each 6.00 306.93 1841.58
long having approx. wt.500 gm
92 153471 Grating 100 mm nominal dia. and 12 mm. high domed shape Each 9.00 60.25 542.25
having wt. not less than 25 gms
93 154010 Providing and fixing 110mm dia PVC soil, waste and vent pipes Metre 150.00 219.06 32859.00
including jointing and cost of spun yarn and sand etc. complete
94 154100 Providing and fixing 110 mm PVC Plain bend of the required Each 36.00 77.54 2791.44
degree with access door inclusive of 3mm thick bitumastic felt
washer, bolts and nuts, complete, including jointing and cost of
spun yarn and sand etc. complete
95 154140 Providing and fixing 75 mm PVC soil, waste and vent pipes Metre 50.00 161.79 8089.50
including jointing and cost of spun yarn and sand etc., complete
96 161020 Supplying and stacking of good earth at site including royalty (earth cum 110.00 180.13 19814.30
measured in stacks will be reduced by 20% for payment)

Pa g e 7 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

97 161042 Supplying and stacking at site dump manure / farm manure / cum 90.00 128.24 11541.60
animal dung manure from approved source; including all lead and
lift etc. (manure measured in stacks will be reduced by 8% for
payment) Screened through sieve of I.S. designation 4.75mm
98 161100 Mixing earth and sludge or manure in proportion specified or cum 240.00 11.91 2858.40
directed. (Net total quantity of earth, sludge or manure after
deduction of voids to be cosidered for payment)
99 161152 Digging holes in ordinary soil and refilling the same with the Each 150.00 35.28 5292.00
excavated earth mixed with manure or sludge in the ratio 2:1 by
volume (2parts of stacked volume of earth after reduction by 20% :
1part of stacked volume of manure after reduction by 8%) floo
Holes/pits 60cm dia. and 60cm deep
100 171261 "Grading / Regrading of roof for water proofing treatment with : cum 30.00 2092.45 62773.50
Cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone
aggregate 20mm nominal size) "
101 171521 Drilling of bore well for specified depth in all types of soil and rock Metre 450.00 209.65 94342.50
mechanically with all contractor's tools, plants, material and labour
up to 75 meters For 150 mm dia
102 171524 Drilling of bore well for specified depth in all types of soil and rock Metre 150.00 41.93 6289.50
mechanically with all contractor's tools, plants, material and labour
up to 75 meters For 150 mm dia Extra over 75m drilling for 150mm
dia
103 171541 Providing supplying, lowering and fixing in bore unperforated MS Metre 120.00 636.39 76366.80
casing pipe 6 mm thickness up to specified depth below ground
level with all contractor's tools, plants, material and labour etc.
Complete 100 mm internal pipe
104 231010 Preparation of subgrade by excavating earth upto 22.5cm depth, Sqm 4560.00 49.66 226449.60
dressing to camber and consolidating with power road roller of 8 to
12 tonne capacity including making good the undulations etc. and
disposal of surplus earth with lead upto 50 metres
105 231041 " Providing and laying water bound macadam with specified stone cum 1140.00 1094.75 1248015.00
aggregate, stone screening and binding material including
screening, sorting, spreading to template and consolidation with
power road roller of 8 to 10 tonne capacity etc. complete. Sub-base
with stone aggregate 90mm to 45mm including stone screening
13.2mm size "
106 236010 Cement concrete Grade M15 of coarse aggregate 40mm nominal cum 912.00 1916.61 1747948.32
size, in pavements, laid to required slope and camber in panels as
required including consolidation finishing and tamping complete
107 252020 Moorum cum 160.00 86.25 13800.00
Total 23672770.15
Schedule Schedule B-Execution of cement item under USSOR-2011
Item- 2 Execution of all items as per Schedule-B
S No. Item Description of Item Unit Qty Rate Amount
No
1 033061 Supply &using cement at worksite of OPC 43 grade Tonne 1071.51 5980.00 6407629.80
Total 6407629.80
Schedule Schedule C-Execution of reinforcement for RCC work under USSOR-2011
Item- 3 Execution of all items as per Schedule-C
S No. Item Description of Item Unit Qty Rate Amount
No
1 045016 Supplying Reinforcement for R.C.C work including straigtening, Kg 82580.00 54.32 4485745.60
cutting bending,placing in position and bindidng all complete.
Thermo-Mechanically Treated bars.
Total 4485745.60
Schedule Schedule E-Execution of NS items under schedule-E
Item- 5 Execution of all items as per Schedule-E
S No. Item Description of Item Unit Qty Rate Amount
No

Pa g e 8 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

1 1 Providing square crossing arrangements for cross track similar to Each 6.00 45000.00 270000.00
plan no. RE/CIVIL/160 -88 (R1) and includes (Sub Item a-e).a)
Earth work excavation in all soils upto depth of 60cm (min) and
refilling the portion with sand and consolidation by watering and
ramming in 15cm layers.b) Concreting in CC 1:3:6 with 20mm
graded stone aggregate using granite metal including fixing and
removal of form work and supports as necessary.c) Providing Rlys.
ACB plates with 4 Nos. of Rlys. Anchor bolt 20 mm dia and 250 mm
long with nuts etc., at suitable intervals not more than 750 mm.d)
Placing rails and prefabricated angle frame work made up of ISA
130x130x12 as check angle for crossing and bolted with black bolts
mm dia and packed with Rail check blocks as shown in the plan..e)
Concreting in CC 1:2:4 with 20mm graded stone aggregate using
granite metal including fixing and removal of form work and
supports as necessary and finishing all other works related to
square crossing and as shown in the plan and also as directed by
the Engineer-in-charge with all lead and lift.(All labour and materials
by contractor except sleeper, rails and check blocks will be supplied
by Railway free. Cement will be paid under schedule-B.Ref: Agt No.
87/RESC/W/11 dt. 27.10.11 NOTE:- Latest drawing with
modification is to be followed.
2 2 Linking new BG track with 90R/52Kg or any other section of rails Per 240.00 160.00 38400.00
including cutting, drilling holes and laid over wooden/CST 9/Steel/ Track
PSC sleepers in position with M +2 density including providing all Metre
fittings and tightening and fixing fish bolts and nuts, aligning,
gauging, leveling and packing after testing and sectioning the
ballast as per standard.
3 3 Linking new BG track with 90 R/52 kg or any other section of rails Per 100.00 60.00 6000.00
including cutting drilling holes and laid over CC approx. with ACB Track
plate duly provided with Rlys. Anchor bolt 250 mm long 20 mm dia Metre
bolts with m+4 density including leveling aligning and gauging etc.,
complete and as directed by the Engineer incharge
4 4 Supplying and fixing 45x45x5mm MS angle tray support on side Set 11.00 3600.00 39600.00
walls of cable trench as shown in plan and as directed by the
Engineer-in-charge with all lead and lift.(All labour and materials by
the contractor)
5 5 Manufacturing and supplying 20 mm dia anchor bolts and nuts 250 Kg 250.00 70.00 17500.00
mm long with anchoring arrangements of 75 mm overall at bottom
and the top 100 mm with threaded arrangements facilitate for
bolting etc., complete and as directed by the Engineer-in-charge
with all lead and lift.
6 6 Providing and fabrication and lying of chequered plate to the Kg 1200.00 80.10 96120.00
required shape and size over the cable trench by making suitable
angle frame around the chequered plate and providing handles
with 10mm plain rods including cost of materials, fabrication,
transportation with all lead, lift, tools & plants machinery and all
labour, consumable etc. and as directed by the Engineer-in-charge
7 7 Supply, Transportation, Erection, Testing and commissioning of Numbers 10.00 33000.00 330000.00
submersible Pump set 1 HP of ISI mark to work on 230V Single
Phase supply suitable for 100mm dia borewell, for a head of 5278
mtrs for water discharge of 1500 to 2500 Ltrs per hour similar to
Texmo / KSB /LUBI with ISI approved including all accessories with
the following materials (i) Control Panel with DOL starter (ii) HDPE
pipe of 32 mm dia, of length 60mtrs with ISI mark (iii) 2.5 sq.mm x
3core copper flat cable of 75 mtrs length with ISI mark (iv) 32mm
stainless steel pipe nipples, boards, nuts, board clamps, GI
cupplings and GI bend(v): 32mm hose pipe clamps, reducer
couplings etc(vi) suitable bore cover etc., complete
8 8 Supply, fixing and concealing of 25mm dia PVC conduit pipe with Running 500.00 35.70 17850.00
wall thickness min. 2mm with all required wiring accessories like Metre
junctions boxes, bends and Tee joints etc., including masonry
works for wiring points, power circuits, sub circuits from switch
board to switch boards. Details as per explanatory-note

Pa g e 9 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

9 9 Shifting / trucking out of isolated/scattered P. W 'Materials any class MT 150.00 25.00 3750.00
such as switches / CMS crossings / rails / P. W. fittings lying any
where else on the cess along the track in mid section, in side
drains, cuttings, slopes of embankments, any where in the yard
lines etc. Either by pulling, dragging or using dip lorry., rail dolly. or
by any other suitable means to the nominated location and stacking
on cess with out infringing to train traffic where it can be directly
loaded in to road vehicles like trailer/lorry with in a maximum lead of
1000m under traffic block, with all lift, crossing of track involved
from the stacked location to the site of work with all contractor's
labour, tools, plants, consumables etc. complete and as directed by
the engineer in charge at site. Ref : Agt No75/RESC/W/10, dt. 22.
07. 10
10 10 Extra for each additional lead of loom or part there of beyond the MT 150.00 200.00 30000.00
initia lead of 1000m 75/RESC/W/10, dt. 22. 07. 10
11 11 Shifting / trucking out of isojated/scattered psc sleepers class I or II MT 300.00 113.40 34020.00
lying any where else on the cess all along the track in mid section,
in side drains, cuttings, slopes of embankments, any where in the
yard lines etc. Either by pulling, dragging or using dip lorry, rail dolly
or. by any other suitable means to the nominated location and
stacking on cess with out infringing to train traffic where it can be
directly loaded in to road vehicles like trailer /lorry with in a
maximum lead of 1000m under traffic block, with all lift, crossing of
track involved from the stacked location to the site of work with
contractor's labour, tools, plants, consumables etc. complete and
a s directed by the engineer in charge at site. 75/RESC/W/10, dt.
22. 07. 10
12 12 Extra for each additional lead of 100m or part there of beyond the MT 300.00 800.00 240000.00
initial lead of 1000m 75/RESC/W/10, dt. 22. 07. 10
13 13 Extra for handlling/loadlng of ERC, GR sole plates, fish plates, CMS MT 3.00 800.00 2400.00
crossings, check rails, glued joints and fish bolts of any section
required for four sets 1 in 8. 5/12 fan shaped layout whenever the
CMS crossing, Check rails, glued joints and other loose fittings
required for the same set of fan shaped layout are arranged and
that can be loaded and transported along with Switches in the
same Road vehicle, as per the directions of the Engineer in charge.
Ref : Agt No. 75/RESC/W/10, dt. 22. 07. 10
14 14 Loading of Rails/CMS crossing / glued joints or other PW fittings MT 50.00 1000.00 50000.00
from the PW depot/P W stores/stacks in to contractors road \/ehicle,
Transporting to the destination through road vehicles unloading
and stacking the transported material at nominated location on
level ground with all contractors labour, tools plants, Road vehicle,
consumables etc. cornplete as directed by the engineer in charge
at site. 75/RESC/wH. O, clt. 22. 07. 1. 0 For initial Iead up to 100km
15 15 Loading of Ralls/CMS crossing / glued joints or other PW fittings MT 24.00 1000.00 24000.00
from the PW depot/P W stores/stacks in to contractor's road
vehicle, Transporting to the destination through road vehicles
unloading and stacking the transported material at nominated
location on level ground with all contractor's labour, tools, plant,
R o a d vehicle, consumables etc. complete as directed by the
engineer in charge at site. 75/RESC/W/10, clt. 22. 07. 10 beyond
the initial lead of 101km to 200km
16 16 Loading of Rails/CMS crossing / glued joints or other PW fittings MT 18.00 1000.00 18000.00
from the P-way depot P-way stores/stacks in to contra ctor's road
vehicle, Trans porting to the destination through road vehicles
unloading and stacking the transported material at nominated
location on level ground with all contractor's labour, tools, plant,
Ro a d veihicles, consumables etc. complete as directed by the
engineer in charge at site. 75/RESC/W/10 dt. 22. 07. 10 beyond
200km from 201km to 300km
17 17 Loading of Rails/CMS crossing / glued joints or other PW fittings MT 15.00 1000.00 15000.00
from the PW depot/P W stores/stacks in to contractor's road vehicle
Transporting to the destination through road vehicles unloading
and stacking the transnorted material at nominated location on
level ground with all contra ctor's labour, tools, plant, Road vehicle,
consumables etc. complete as directed, for beyond lead of 300km,
by the engineer in charge at site. 75/RESC/V V/10, dt. 22. 07. 10

Pa g e 10 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

18 18 Loading of PSC sleepers in to road vehicle, Transportation to the MT 100.00 200.00 20000.00
destination, unloading and stacking the transported material at
nominated location including all lift and lead within 50m from stacks,
unloading and stacking the transported material at nominated
location on level ground with all contractor's labour, tools, plant,
Road vehicle, consumables etc. complete as directed, by the
engineer in charge at site. Ref : Agt No. 75/RESC/W/10, dt. 22. 07.
10 for lead up to 100km
19 19 Loading of PSC sleepers in to road vehicle, Transportation to the MT 15.00 5000.00 75000.00
destination, unloading and stacking the transported material at
nominated location Including all lift and lead within 50 m from
stacks, unloading and stacking the transported materials at
nominated location on level ground with all contractor's labour,
tools, plant, Road vehicle, consumables etc. complete as directed
by the engineer in charge at site. For lead more than 100km to
200km Ref: Agt No. 75/RESC/W/10, dt, 22. 07. 10
20 20 Cutting of rails with hacksaw blade true to square the rails of any Each Cut 110.00 80.00 8800.00
section under traffic condition / laying along side the track/at depot
as directed by the Engineer-in Charge with all contractor's labour,
tools, consumables with all lead and lift handling etc ; complete.
Note : 1. Cutting of rails with blade and forcing to part by using
other means to break the rails is prohibited. Rails should be cut
right through hacksaw blades only. 45/SrDEH)/Lines/HYB Dt 27. 02,
17
21 21 Drilling holes 26 to 32mm dia in rails of 90lbs & above section as Each 200.00 58.85 11770.00
per the correct template with machine including champhering and Hole
as directed by Engineer-in- charge at site. Note : 1. Contractor has
to use his own equipment, materials, fuel and labour etc., and the
rate is inclusive for this and is for the complete job. Agt. No.
11/W/2017 DT. 16-06-2017 of SC Div
22 22 Drilling S& T Bond holes of 7. 9 mm dia. In rails of any section Each 600.00 27.52 16512.00
72/90UTS to the correct template with machine including Hole
champhering and as directed by Engineer- in-charge at site. with all
Contractor's own equipment, machine, consumables and labour
etc. complete within under traffic condition
23 23 Removing the 52kg/60kg rails and fastenings including removal of Per 120.00 38.93 4671.60
fish plates with bolts and nuts etc. And stacking neatly at site with Track
all contractors labour, tools, plant, all lead, lift, crossing of tracks Metre
etc. complete and as directed by tlie Engineer-in-charge. Agt. No.
24/sr. DEN/North/BZA/2017, dt. 02. 11. 2017
24 24 Removing isolated exg, 60Kg. /52Kg. /44, 61kg. Running rails and Per 200.00 23.85 4770.00
fastenings from the track in the traffic/non traffic blocks and Placing Metre of
the same away from the running/non running lines and stacking the Rail
same at nominated locations material wise and class wise with
contractor's labour, tools, plants, loading, unloading, leading,
Lifting, dragging, positioning on the cess, crossing of track etc.
complete and as directed by the engineer in charge at site. Note :1.
Payment will be made for this item above will be released
irrespective of number of rails released, and also after stacking
released material wise and classification wise at nominated places.
2. This item should be operated only when through weld renewal in
single rail side to be renewed at isolated locations should not be
operated for rails renewal on both sides for a continuous length of
more than 50m. Unit Per Metre of Rail Means Linear metre (LM)
CW/148/WV/S/103/SC/17/OT dtd.08.11.2017
25 25 Removing existing CST-9/ST/W/PSC Sleepers and fastenings from Each 350.00 67.18 23513.00
the track with contractor's labour, tools, plant, all lead, lift, crossing
of tracks and stacking the released material classification wise and
material wise at site of work complete and as directed by the
Engineer-in-charge. NOTE : This item is to be operated at Isolated,
locations only Agt. No. 25/Sr. DEN/North/BZA/2016, dt : 28. 11.
2016

Pa g e 11 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

26 26 Removing and screening the ballast (in mid section between Per 210.00 92.35 19393.50
stations and yards excluding points and crossings) in between and Track
around the sleepers up to a depth of 50mm without disturbing the Metre
core and to a slope of 1 in 40 on either sides from centre up to the
end of the sleeper including screening of ballast in the entire
shoulders up to formation level using inclined screens and
removing weeds with routes and boxing of ballast to the profile
specified in p. Way manual including re-adjustment of ballast by
leading the excess ballast to deficient locations up to a maximum
lead of 50M and depositing the muck as per the directions of
Engineer-in-charge up to a maximum lead of 100M duly crossing
the tracks, platforms etc. with all contractors' labour, tools, plant, all
lead, lift etc. complete and as directed by the Engineer-in-charge.
Note : 1) Before execution of work specific approval of Sr.
DEN/DEN has to be obtained by ISE/P. Way through ADEN duly
indicating the locations with specific reasons along with date of last
screening done. 2) The progress of work should be shown in the
gang chart immediately after the work is done. 3) ADEN shall test
check 50% of the work done. 4) No. of men engaged daily by the
contractor shall be entered in the site order book. 5) This item is to
be operated for shallow screening of entire width of ballast section.
08/Sr. DEN/Lines/ HYB Dt. 02. 08. 2017
27 27 Removing existing points and crossing consisting of 52kg rails on Per 300.00 80.00 24000.00
PSC sleepers from running lines duly dismantling rails and Track
sleepers, removing the ballast to the required depth and stacking it Metre
on the cess, laying plain track duly spreading PSC sleepers to the
spacing / rails providing the track fittings etc. As per the standard
procedure for the length of the points removed, under traffic block
of not more than 2 hours duration and connecting the newly laid
plain track to the existing line, giving one round of kutcha packing to
obtain level and line so as to allow trains at a slower speed of
20kmph safely, stacking the released materials at nominated
location with out infringing to traffic with all contractor's labour, tools
and plant including consumables etc. complete as per the
directions of the engineer in charge.-Ref : Agt No. 75/RESC/W/10,
dt. 22. 07. 10 For 1 in 8. 5 layout
28 28 Laying and linking of BG track with 52/ 60kg, Rails on CST-9/ ST/ Running 450.00 261.37 117616.50
PSC sleepers to M+4/M+7 density including all operations involved Metre
such as leading of permanent way materials to the site of the work,
pairing of rails, assembling with sleepers to correct spacing of
M+4/14+7 density laying rails to sleepers to correct NS 571050 NS
571060 gauge with rolling mark towards the direction of traffic and
fastening the rails to sleepers with standard fittings linking of rail
lengths of track with fish plates bolts and nuts to a neat gauge of
1676mm including one initial kutcha packing to the specified
column with stone/moorum ballast as per the schedule including
aligning, gauging, leveling, squaring of sleepers, boxing of ballast to
the required profile, cutting of rails and drilling of holes and
chamfering for shorter lengths wherever necessary, testing the with
light engine or dip lorry loaded with rails weighing 15MT,
rectification of defects after rolling and maintaining the track for 45
days after opening of track with all contractor's labour, tools,
tackles, consumables with all lead and lift etc, complete and as per
the specifications and as directed by the Engineer-in- charge
including crossing of track wherever necessary. Unit: Per Track
Meter means Track Running Meters. (TRM)
CW/148/WV/N/151/SC/16/OT Dt. 06-02-2017

Pa g e 12 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

29 29 Assembling and laying BG 1 in 8. 5 points and crossings by Set 3.00 30107.00 90321.00
manually or with railway machine with fan shaped PSC layout on
PSC crossing sleepers with 52/60 kg tongue, stock and lead rails-
CMS crossings and curved switches etc., with rubber pad, liners
and (from stock rail joint to heel of crossing) under line block within
the stipulated time complete set with all P.way fittings to 'BG
standard by way of methods as elucidated in p ara 317 (b) (I) and
(II) of IRPWM 2004 and including providing one kutcha packing,
leveling, gauging, aligning and jointing the ends as per P. way code
of practice profiling and boxing of ballast etc., complete so as to
allow the passenger trains at the restricted speed with all
contractors labour, tools, tackles, consumables etc., complete and
including cutting of rails, drilling of rails and chamfering of rails for
shorter lengths wherever necessary and testing the track with
engine or dip lorry loaded with rails weighing 15MT, rectification of
defects after rolling and maintaining thetrack for 45 days after
opening for traffic and including crossing of tracks wherever
necessary with all lead and lift etc., complete and as per
specification and as directed by the Engineer- in-charge at site and
including leveling the ground to required extent for assembling of
points and crossings. 1 in 8.5 Points and crossings. Agt. No.
04/W/14. Dt. 31. 03. 17 of SC Div
30 30 Assembling and laying BG 1 in 12points and crossings by manually Set 1.00 36128.42 36128.42
or with Railway machine with fan shaped PSC layout on PSC
crossing sleepers with 52/60 kg tongue, stock and lead rails CMS
crossings and curved switches etc., with rubber pad, liners and
(from stock rail joint to heel of crossing) under line block within the
Stipulated time complete set with all P. way fittings to BG standard
by way of methods as elucidated in para 317 (b) (I) and (II) of
IRPWM 2004 and including providing one kutcha packing, leveling,
gauging, aligning and jointing the ends as per P. way code of
practice profiling and boxing of ballast etc., complete so as to allow
the passenger trains et the restricted speed with all contractors
labour, tools, tackles, consumables etc, complete and including
cutting of rails, drilling of rails and chamfering of rails for shorter
lengths wherever necessary and testing the track with engine or dip
lorry loaded with rails weighing 15MT, rectification of defects after
rolling and maintaining the track for 45 days after opening for traffic
and including crossing of tracks wherever necessary with all lead
and lift etc., complete and as per specification and as directed by
the Engineer- in-charge at site and including leveling the ground to
required extent for assembling of Points and crossings. 1 in 12
points and crossings. Agt.No. 04/W/14. Dt. 31. 03. 17 of SC Div
31 31 packing the existing plain track/1 in 8. 5/1 in 12 points and Set 4.00 3413.47 13653.88
crossings track below the bottom of psc sleepers and surrounding
with crow bars/beaters to have two / Three rounds of packing to :
bring the track to normal speed including gauging, aligning,
squaring of sleepers and sectioning of ballast to the required profile
with Contractor's labour, tools etc., complete and as directed :by
the Engineer-in-charge. I) First round.. of packing Agt. No.
32/South/BZA/2016, dt. 27-12-2016
32 32 Packing the existing plain track/1 in 8. 5/1 in 12. points and Set 4.00 2275.69 9102.76
crossings track below the bottom of pSC sleepers and surrounding
with Crow bars/beaters to have two / Three rounds of packing to
bring the track to normal. speed' including gauging, aligning,
squaring of sleepers and sectioning of ballast to the required profile
with Contractors labour, tools etc., complete and as directed by the
Engineer-in-charge. II) \Second round of packing Agt. No.
32/south/BZA/2016, dt. 27-12-2016
33 33 Packing the renewed isolated'psC sleepers on plain track below the Per 800.00 26.13 20904.00
bottom of the sleepers and surrounding through out its length duly Sleeper
opening two galas on either side of the renewed sleepers with Crow
bars/beaters to have three rounds of packing to bring the track to
normal speed in stages including gauging, aligning, squaring of
sleepers and sectioning of ballast to the required profile with all
contractor's labour, tools and plant etc. Including all lead and lift
and crossing of tracks where ever necessary complete and as
directed by the Engineer-incharge I) First packing Agt. No.
03/South/BZA/2016, dt. 13-02-2016

Pa g e 13 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

34 34 Packing the renewed isolated PSC sleepers on plain track below Per 800.00 26.13 20904.00
the bottom of the sleepers and surrounding throughout its length Sleeper
duly opening two galas on either side of the renewed sleepers with
Crow bars/beaters to have three rounds of packing to bring the
track to normal speed in stages including gauging, aligning,
squaring of sleepers and Sectioning of ballast to the required profile
with all contractor's labour, tools and plant etc. Including all lead
and lift and crossing of tracks where ever necessary complete and
as directed by the Engineer-in-charge ii) Second packing Agt. No.
03/South/BZA/2016, dt. 13-02-2016
35 35 packing the renewed isolated PSC sleepers on plain track below Per 800.00 26.13 20904.00
the bottom of the sleepers and surrounding throughout its length Sleeper
duly opening two galas on either side of the renewed sleepers with
crow bars/beaters to have three rounds of Packing to bring the
track to normal speed in stages including gauging, aligning,
squaring of sleepers and sectioning of ballast to the required profile
with all contractor's labour, tools and plant etc. Including all lead
and lift and crossing of tracks where ever necessary complete and
as directed by the Engineer-in-charge") iii) Third packing Agt. No.
03/South/BZA/2016, dt. 13-02-2016
36 36 Deploying 4 men for protection of Track at work spot as per the Each 12.00 309.00 3708.00
procedure elucidated in chapter VIII of the IRPWM 1986 Second
reprint 2004 of Indian Railway during the works of long / short
duration with all contractor's equipment, fuel, labour tools etc.
complete as per the directions of the engineer at site. Ref : Agt No.
75/RESC/W/10, dt. 22. 07. 10
37 37 Deploying one man for piloting of trains during day and night © 3 Each 15.00 309.00 4635.00
shifts of 8 hrs per day with all contractor's consumables, equipment
such as tri colour hand signal lamps, Hand signal flags, labour etc.
complete and as per the direction of the engineer at site. Ref : Agt
No. 75/RESC/W/10, dt. 22. 07. 10
38 38 Deploying one set of black smith set consisting of one highly skilled Day 15.00 1340.00 20100.00
artisan blacksmith, two semi skilled and one unskilled artisan for 12
hrs every day for attending the setting of points on nominated day,
associate with S & T department along with all tools required for
attending the point failures arising out of civil Engineering in the
normal course of working so as to avoid signal failures and
detention to the trains as per the directions of the engineer in
charge at site with all contractor's labour, tools and plant etc.
complete. Ref : Agt No. 75/RESC/W/10, dt. 22. 07. 10
39 39 Construction of fouling points as per the standard drawing (The Each 6.00 1200.00 7200.00
approximate quantity of the Cement concrete required is 0.09cum) Plate
and giving two coats of painting including lettering "'F. M'" on either
sides Ref: Agt No. 75 /RESCn'V/'10, dt. 22. 07. 10
40 40 Providing one PW supervisor not less than the grade of retired Day 30.00 402.00 12060.00
PWS for undertaking the track work and to ensure safety at work
spot from the day of starting the track work in running track to till
the final handing over of the track to open line after completion of
the track works to SSE/PW duly taking instructions from time to
time. Ref : Agt No. 75/RESC/W/10, dt. 22. 07.10
41 41 Providing round-the c'lock watch and to the PW Materials taken Man- 270.00 309.00 83430.00
over from various sources, from the day of stacking the, materials Days
to till the final disposal of the balance materials to the DSK or
SSE/PW concerned. ( Two men must be arranged Per day with a
shift duty of 12hrs as per general practiced in Railways excluding
the rest giver who also has to. Iook after the duties once in a week
thus the number of man days works out to @ 2 men per day for 90
days = 180 men days) Ref : Agt No-75/RESC/W/10 dt.22.07.10
42 42 Supply of 50mm metal stone baflast (machine crushed) including cum 1200.00 849.53 1019436.00
collection from quarries outside the Railway limits at the site shown
by the Engineer-in- charge for measurements with all lead and lift
and spreading 50mm metal stone ballast to the required cushion
for track lifting, packing and giving final packing after testing and
sectioning the ballast to the standard profile and attending the
alignment, gauge level etc., and as directed by the Engineer-in-
charge with all lead and lift

Pa g e 14 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

43 43 Fusion welding of Class-I / Class-II Rail Joints including supply of Per Joint 60.00 5700.00 342000.00
portions, consumables etc., by Alumino Thermic SKV process to
IRS specification No. T- 19-1994 with latest amendments and
manual of fusion welding of Rails b) by Alumino Thermic process
1988 (with Air petrol pre-heating / compressed air petrol pre-
heating techniques and latest amendments) complete including
painting of Rails with anti corrosive paint conforming to IS 9862 for
a length of 10cm on either side of weids to the latest RDSO
specifications with all contra ctor's labour, materials, consumables,
tools, plant and equipment and as directed by the Engineer
44 44 Providing glued joints in the exg, running track under block with all Each 20.00 330.00 6600.00
Rly materials including leading the glued joints within yard limits to
the site and also leading the released cut rails to the places
mentioned by the Engineer-in-charge and stacking both upto a
maximum lead of 500m by cutting the existing rails on both sides
Eind inserting the glued joint and fish plates with clamps with
contractors labour, tools with all lead and lift etc. complete as per
specification and as directed by the Engineer-in-charge
45 45 Cutting of rails with Abrasive disk / hacksaw blade/ gas true to Each Cut 100.00 270.04 27004.00
Square the rails of any section under traffic condition/lying
alongside the track/at depot as directed by the Engineer-in-charge
with all contractor's labour, tools consumables with all lead and lift
handling etc. complete. Note: -1.Cutting of rails with blade and
forcing to part by using other means to break the rails is prohibited.
Rails should be Cut right through by hacksaw blades. 2. The rails
shall be cut so as to obtain a minimum length of 12M. No rail shall
be cut for less than 12M. Length without the written permission of
the concerned ADEN. With Railway cutting machine using
contractor's Abrasive rail cutting disc LOA. No.
CW/148/WV/113/W/SC/17/0T, dt. 11.12.17
46 46 Assembling laying and insertion of trap switches with Railway Each 5.00 9973.47 49867.35
Switches, rails, trap switch PSC sleepers fastening with standard
fastenings as per Standard drawing and laying by mechanical
means involving creation of staging/leveling the ground for
assembling and insertion of PSC trap switch sleepers to correct
spacing duly fixing of rails, fastening with sleepers, re-spreading of
ballast, aligning, leveling gauging, lifting, spreading, surfacing,
profiling and boxing of ballast to the standard section and providing
one kutcha packing so as to allow the passage of trains at
restricted speed including handling of sleepers at site by way of
carrying the sleepers to correct position with all contractor's labour,
tools, plant, materials like earth for leveling ground, staging, all
lead, lift & crossing of tracks where ever necessary etc, under track
conditions complete as per S.C.railway specification and as
directed by the Engineer-in Charge Note 1).the staging required for
assembling has to be made by the contractor at his own cost and
own materials. No extra payment will be made for this. 2). All Works
required for insertion of new PSC trap switches has to be carried
out by the contractors. 3) The work should be carried out with in
stipulated time/line block. All work should be carried out as per
standard drawing. 4). Connecting to approach rails, approach
ramping has to be done by the contractor at his own cost. 5). AIl P-
way fastening/fittings required for the Work shall be issued at
SSE/P.way Stores. Contractor has to transport the same to site at
his own cost LOA No.B/W.496/1/4/T.No.41/South/2016/T-I, dt.06-
03-2017
47 47 Manufacturing supplying & fixing of protective screens in between Kg 8500.00 100.00 850000.00
Chikbanavar- Arsikere Section in Banglore & Mysore Division as
per RDSO Drg.No.ETI/C/0068 with latest modifications including
transporting the same to the site etc at FOB/ROB in fixing the
protective screen as per direction of Engg-in-charge. The work
involves fabricating i.e cutting of angles, tee, flat,including MS
sheet, XPM etc required for work making hole in the steel member
welding and all other work in connection with fabrication including
two coats of paint of an approved quality together with one priming
coat. The materials tools and plants MS plate, hooks, bolts & nuts
painting etc. will be borne by the contractor including all
lead,lift,labour etc. Rate Ref:- SDRE-TJRE/CIVIL/Bridge
Mast/OT/15-16/6 dtd.20.09.2016.
Total 4196645.01

Pa g e 15 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

Schedule Schedule F-Execution of Elect. items under Schedule-F

Item- 6 Execution of all elect. items as per Schedule-F
S No. Item Description of Item Unit Qty Rate Amount
No
1 1 Supply and laying of PVC conduit pipe/polythene pipe of size 25/19 Metre 600.00 18.65 11190.00
mm on roof/wall.
2 2 Supply and laying of PVC rigid conduit pipe 20 mm dia (in side dia Metre 400.00 15.63 6252.00
15.8 mm) with saddles/clamps to be laid on truss /structure/wall.
Total 17442.00

4. ELIGIBILITY CONDITIONS

Submission of Affidavit

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Please submit notarized affidavit on a non-judicial stamp paper in the prescribed format
(please download format from the link given below) for verification / confirmation of the
Allowed
1 documents submitted for compliance of eligibility/qualifying criteria. Non submission of No No
(Mandatory)
properly filled affidavit in the prescribed format shall lead to summary rejection of your offer.
Click here to download the format for Affidavit

Standard Financial Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Financial Eligibility Criteria:The tenderer must have received contractual payments in the
previous three financial years and the current financial year up to the date of opening of tender,
at least 150% of the advertised value of the tender. The tenderers shall submit certificates to Allowed
1 No No
this effect which may be an attested certificate from the concerned department / client and/or (Mandatory)
Audited Balance sheet duly certified by the Chartered Accountant etc. For details Tenderers
are requested to refer Eligibility Criteria i.e. Chapter-3 of the Annexed Document.

Standard Technical Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Technical Eligibility Criteria: The tenderer must have successfully completed any of the
following during last 07 (Seven) years, ending last day of month previous to the one in which
tender is invited: Three similar works costing not less than the amount equal to 30% of
Allowed
1 advertised value of the tender, or Two similar works costing not less than the amount equal to No No
(Mandatory)
40% of advertised value of the tender, or One similar work costing not less than the amount
equal to 60% of advertised value of the tender. For details Tenderers are requested to refer
Eligibility Criteria i.e. Chapter-3 of the Annexed Document.
Similar nature of work means: - Civil Engineering works like construction of buildings / Sheds /
1.1 No No Not Allowed
RCC OH tanks / Structural steel works.

5. COMPLIANCE

Check Lst

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Whether cost of tender document deposited.However, for service contracts, Micro &
Small Enterprises (MSEs) registered with District Industries Centres, Khadi and
Village Industries Commissions, Khadi and Village Industries Board, Coir Board,
1 No No Not Allowed
National Small Industries Corporation, Directorate of Handicraft and Handloom, Any
other body specified by Ministry of MSME shall be exempted from payment of Tender
Document cost as mentioned above
2 Whether the Certificate of familiarization submitted. No No Not Allowed
3 Whether History sheet of tenderers filled in as per Annexure A of Annexed document No No Not Allowed
Whether details of execution of similar work submitted as per Annexure-B of Annexed
4 No No Not Allowed
document.
Whether Credential Certificates in support of execution of similar work of advertised
5 No No Not Allowed
tender value submitted.
Whether details of Contractual payments received submitted as per Annexure-C of
6 No No Not Allowed
Annexed document.

Pa g e 16 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

Whether an attested certificate from the concerned department / client and / or

audited balance sheet duly certified by Chartered Accountant in support of the receipt
7 No No Not Allowed
of contractual payments received during three previous financial years and the
current financial year up to the date of opening of the tender submitted.
Whether details of Tools and Plants submitted as per Annexure-D of Annexed
8 No No Not Allowed
document.
Whether details of personnel to be engaged in the work submitted as per Annexure-E
9 No No Not Allowed
of Annexed document
Whether details of work completed during previous seven years submitted as per
10 No No Not Allowed
Annexure-F of Annexed document.
Whether details of works presently on hand submitted as per Annexure-G of
11 No No Not Allowed
Annexed document.
Whether declaration regarding association of Railway Officers with tenderer s
12 No No Not Allowed
submitted as per Annexure-H of Annexed document
Whether list of court cases during previous three financial years submitted as per
13 No No Not Allowed
Annexure-I of Annexed document.
Whether list of arbitration cases during previous three financial years submitted as
14 No No Not Allowed
per Annexure-J of Annexed document.
Whether broad plan of execution of work submitted as per Annexure-K of Annexed
15 No No Not Allowed
document.
Whether details of other credentials/facilities not covered under Annexure-A to
16 No No Not Allowed
Annexure-K submitted as per Annexure-L of Annexed document
Whether MANDATE Form for EFT submitted as per Annexure-M of Annexed
17 No No Not Allowed
Document.
Whether an Affidavit is submitted as per the proforma enclosed as Annexure-N of the
18 Annexed Document, executed in presence of Public Notary on Non-Judicial stamp No No Not Allowed
paper of value Rs. 100/-.
Whether cost of Earnest Money deposited.However, for service contracts, Micro &
Small Enterprises (MSEs) registered with District Industries Centres, Khadi and
Village Industries Commissions, Khadi and Village Industries Board, Coir Board,
19 No No Not Allowed
National Small Industries Corporation, Directorate of Handicraft and Handloom, Any
other body specified by Ministry of MSME shall be exempted from payment of EMD
as mentioned above.

Commercial-Compliance

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Please submit your bank details i.e. Name of Bank along with Bank Branch Code,
Accounts Number as appearing in the cheque book, IFSC Code and PAN Number,
duly certified by the authorised official of the bank, to facilitate payment through Allowed
1 Yes No
ECS/NEFT/RTGS as per Annexure-M of Chapter-9 of Annexed Document. In lieu of (Mandatory)
Bank Certificate, scanned copy of a cancelled cheque may be attached for
verification of the above particulars
Please submit details of the constitution of the Firm/JV/Company/Society etc and also
submit relevant documents like Partnership Deed, Memorandum of Association,
Article of Association, Bye Laws, by uploading duly self attested/digitally signed by the
Allowed
2 tenderer or authorised representative of the tendering firm in accordance with Yes No
(Mandatory)
Annexure-A of Chapter-9 of the Annexed Document. Self attestation shall include
signature, stamp and date (on each page). Non-submission of these documents shall
render the offer liable to be rejected.
Please submit the Certificate of familiarization to the work site as per Chapter-8 of the Allowed
3 Yes No
Annexed Document (Mandatory)
Please submit details of Tools and Plants as per the format vide Annexure-D of Allowed
4 Yes No
Chapter-9 of Annexed Document. (Mandatory)
Please submit details of personnel to be engaged in the work as per the format vide Allowed
5 Yes No
Annexure-E of Chapter-9 of the Annexed Document (Mandatory)
Please submit details of work completed in the past as per the format vide Annexure- Allowed
6 Yes No
F of Chapter-9 of the Annexed Document. (Mandatory)
Please submit details of works presently on hand as per the format vide Annexure-G Allowed
7 Yes No
of Chapter-9 of the Annexed Document. (Mandatory)
Please submit declaration regarding association of Railway Officers with tenderer(s) Allowed
8 Yes No
as per the format vide Annexure-H of Chapter-9 of the Annexed Document. (Mandatory)

Pa g e 17 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

Allowed
Please submit list of court cases as per the format vide Annexure-I of Chapter-9 of
9 Yes No (Mandatory)
the Annexed Document

Please submit list of arbitration cases as per the format vide Annexure-J of Chapter-9 Allowed
10 Yes No
of the Annexed Document. (Mandatory)
Please submit broad plan of execution of work as per the format vide Annexure-K of Allowed
11 Yes No
Chapter-9 of the Annexed Document. (Mandatory)
Please submit details of other credentials/facilities as per the format vide Annexure-L Allowed
12 Yes No
of Chapter-9 of the Annexed Document. (Mandatory)
Please submit an Affidavit as per the proforma enclosed as Annexure-N of the
Annexed Document, executed in presence of Public Notary on Non-Judicial Stamp Allowed
13 Yes No
Paper of value Rs. 100/-. Offers without such Affidavit shall be considered incomplete (Mandatory)
and will be rejected summarily.
Please enter the percentage of local content in the material being offered. Please
enter 0 for fully imported items, and 100 for fully indigenous items. The definition and Allowed
14 No Yes
calculation of local content shall be in accordance with the Make in India policy as (Optional)
incorporated in the tender conditions.

General Instructions

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
1 No manual tenders sent by Post/FAX/Courier or in person shall be accepted. No No Not Allowed
If the mandatory documents asked for in the Annexed Document are not submitted
2 along with the tender, the tender submitted otherwise will be treated as incomplete No No Not Allowed
and will not be considered.
Payment of Earnest Money Deposit and Tender Document Cost shall be accepted
through Net Banking or Payment Gateway only. No other mode of payment shall be
accepted. However, for service contracts, Micro & Small Enterprises (MSEs)
registered with District Industries Centres, Khadi and Village Industries Commissions,
3 No No Not Allowed
Khadi and Village Industries Board, Coir Board, National Small Industries
Corporation, Directorate of Handicraft and Handloom, Any other body specified by
Ministry of MSME shall be exempted from payment of EMD and Tender Document
Cost as mentioned above
Tender offer should accompany copies of all required documents duly self
attested/digitally signed by the tenderer or authorised representative of the tendering
4 No No Not Allowed
firm otherwise the offer will be treated as unresponsive and liable to be ignored. Self
attestation shall include signature, stamp and date (on each page).
In case the date of closing mentioned in the NIT Header of e-tender document is
declared a holiday/bandh/strike etc. on any account, the date of closing tender online
will not be changed as the application in the website of IREPS does not permit
5 No No Not Allowed
submission of any offer after closing date and time of the tender. However, opening
of tenders online will be on the following working day after the closing date/time of
tenders.
The tenderer are advised to revisit the IREPS website 15 (fifteen) days before the
6 No No Not Allowed
date of closing of tender to note any changes/corrigenda issued for this tender.
No Post tender correspondence shall be entertained after closing of tender even suo
7 No No Not Allowed
moto post tender letters of the tenderers shall be treated as null & void.
Rates quoted by the tenderer in the relevant fields of the Financial Bid Page only will
be the ruling terms for deciding inter-se-ranking and any condition having financial
8 No No Not Allowed
repercussions, if quoted anywhere else shall not be considered for deciding the inter-
se-ranking
For more details, the Instructions to the Tenderers vide Chapter- 2 and all other
9 details available in the Annexed Document to the E-Tender Document may be No No Not Allowed
referred to.
The Tenderer should submit an Affidavit as per proforma enclosed as Annexure-N of
the Annexed Document, to be executed in presence of Public Notary on Non-Judicial
10 No No Not Allowed
Stamp Paper of value Rs. 100/-. Offers without such Affidavit shall be considered
incomplete and will be rejected summarily
Standard General Conditions of Contract -2019 corrected up to the date of closing of
tender, USSOR south western Railway-2011 corrected up to the date of closing of
11 No No Not Allowed
tender and the Annexed Documents are part of the tender document. Exceperts of
G.C.C is available at Chapter-4.

Special Conditions

Pa g e 18 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Tenderers are requested to refer Chapter-5 of the Annexed Document for Special
1 No No Not Allowed
Conditions of Contract.

Technical-Compliances

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Please submit the details of execution of three Similar Works costing not less than
the amount equal to 30% of advertised value of the tender, or two similar works
costing not less than the amount equal to 40% of advertised value of the tender, or
one similar work costing not less than the amount equal to 60% of advertised value of Allowed
1 No No
the tender along with certificate issued by concerned authority. Certificate submitted (Mandatory)
to meet eligibility criteria should confirm to the requirement without any ambiguity or
needing any further clarification. Certificate which does not contains items of
requirement clearly will not be considered.
Please submit an attested certificate from the concerned department / client and / or
audited balance sheet duly certified by Chartered Accountant in support of the receipt
of contractual payments received during three previous financial years and the
Allowed
2 current financial year up to the date of opening of the tender. Certificates submitted No No
(Mandatory)
to meet eligibility criteria should confirm to the requirement without any ambiguity or
needing any further clarification. Certificate which does not contain items of
requirement clearly will not be considered.

Undertakings

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
1 I/ We have visited the works site and I / We am / are aware of the site conditions. No No Not Allowed
I/We have read the various conditions attached/referred to in this tender document
2 No No Not Allowed
and agree to abide by the said conditions.
I/We also hereby agree to abide by the Indian Railways Standard General Conditions
of Contract-2019 with all Correction Slips up to date of closing of tender and to carry
out the work according to the Special Conditions of Contract and Specifications of
3 No No Not Allowed
Materials and works as laid down by Railway in the annexed Special
Conditions/Specifications, Schedule of Rates with all correction slips up to the date of
closing of tender for the present contract.
I/We hereby confirm that the rates, rebates and/or other financial terms, if any,
quoted by us in the relevant fields of the Financial Bid page will only be the ruling
4 terms for deciding the inter-se-ranking and any such conditions having financial No No Not Allowed
repercussions, if quoted by us anywhere else including attached documents shall not
be considered for deciding inter-se-ranking
I/We agree to keep our offer open for acceptance for the period of days as
5 mentioned on NIT HEADER from the date of closing of tender and in default thereof, No No Not Allowed
I/We will be liable for forfeiture of my/our Earnest Money.
The amount as stipulated in tender document is herewith forwarded as Earnest
6 No No Not Allowed
Money shall stand forfeited without prejudice if :-
I/We resile from my/our offer or modify the terms and conditions thereof in a manner
7 not acceptable to the Railways during validity period of the offer as mentioned on NIT No No Not Allowed
HEADER.
I/We do not submit a Performance Guarantee in any of the prescribed form within 60
8 No No Not Allowed
days from the date of issue of letter of acceptance.
I/We do not execute the contract within 7 days after receipt of notice by Railway that
9 No No Not Allowed
such documents are ready.
I/We do not commence the work within fifteen days after receipt of Letter of
10 No No Not Allowed
Acceptance to that effect.
Until a formal agreement is prepared and executed, acceptance of this tender shall
constitute a binding contract between us subject to modifications, as may be mutually
11 No No Not Allowed
agreed to between us and indicated in the letter of acceptance of my/our offer to this
work.
I/We offer to do the work for Railway Electrification at the rates quoted in the attached
schedule and hereby bind myself/ourselves to complete the work in all respect within
12 No No Not Allowed
the period of completion stipulated in the tender document from the date of issue of
letter of acceptance of the tender.

Pa g e 19 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13

 CORE-BBS-ENGINEERING/CORE
TENDER DOCUMENT
Tender No: RE-SBC-CIVIL-20-21-2 Closing Date/Time: 04/06/2020 15:00

I/we hereby confirm that I/we have satisfied myself/ourselves by actual inspection of
the site and locality of the work that all conditions liable to be encountered during
execution of the work are taken into account and that the rates entered in the tender
13 No No Not Allowed
are adequate and all inclusive, in accordance to the provision in Clause- 37 of the
Indian Railway Standard General Conditions of Contract-2019 with corrections up to
the date of closing of tender.
14 I/ We have visited the works site and I / We am / are aware of the site conditions. No No Not Allowed

6. Documents attached with tender

S.No. Document Name Document Description

1 AnnexDocument.pdf Annexed document

This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by Department of
Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no. 2015/RS(G)/779/5 dated
03/08/2017 and 27/12/2017.

Signed By: KANAI LAL SEN

Designation : Dy.CE/RE/BBS

Pa g e 2 0 o f 2 0 Ru n Da te/Time: 0 6 /0 5 /2 0 2 0 17:36 :13