I 410 Graphic Terminal

Options I 410 D / D-S / D-T

WWW.PRECIAMOLEN.COM
Internal measurement board 100-240 V - 50/60 Hz primary for all models.

Analog measurement board Communication

 Input division ........................................................................................... 0.5 μV
Serial link
 Number of divisions ......................................................................... 200 000
(Non Trade Use)  RS 232 serial link
 Load cell junction:  RS 422/485 serial link
• Nominal power supply................................................................ 5 V DC
• Junction .......................................................................................... 4/6 wire shield Field bus
• Minimum impedance................................................................... 58   Ethernet Modbus-TCP

WWW.PRECIAMOLEN.COM
• Maximum impedance.................................................................. 1 245 
• Maximum cable length............................................................... 150 m
(0.68 mm²)  PROFIBUS-DP
• Connection ....................................................................... Spring terminals
• Dead load minimum signal..................................................... 0 mV
• Useful maximum signal ............................................................ 12 mV
 Number of measurements available Inputs/Outputs I 410 D-S
per second ................................................................................................ 7 to 120 I 410 D
 2 digital inputs/4 digital outputs
 Adjustable filtering modes and parameters
• Inputs:
This option enables connecting 4 to 6* load cells via an external Input tension ................................................................................... 8-30 V DC
junction box. • Outputs:
Max. power / contact ................................................................. 100 mA
Digital measurement board (PMNet)
Max. tension. ....................................................................................... 48 V DC
TU NTU Ron ................................................................................................................ 15 
 Accuracy class (TU only) III -
 1 analog input/2 analog outputs 4-20 mA or 0-10 V
 Maximum number of divisions:
• mono-range 10 000 30 000 (isolation 500 V / system) I 410 D-T
• double-range 2 x 10 000 - • Input and outputs:
 Power tension 24 V DC Input impedance.......................................................................... 440 
 Load impedance Load resistance** .................................................................... 500 
 Number of physical measurement chan- 1 to 3 depending on
nels configuration
Accuracy ............................................................................................ 0.1 % Presentation Available models
Resolution ......................................................................................... 16 bits
7 (channels resulting
 Number of channels from the combination The I 410 Graphic Terminal is part of the PRECIA MOLEN I 410 The I 410 graphic terminal range is made up of the various
of 3 physical channels) DSD range. It is the central man/machine interface item. models below.
 Maximum number of load cells per
12 Weigh data storage device for 38 000 or 128 000 records.  I 410 D: panel-mounted terminal in cabinet or console.
channel It encloses a wide software library to meet most needs related to
 Max permissible error distribution factor 0 dosing, tolerance check, check weighing, continuous totalling,  I 410 D-S: terminal in waterproof stainless steel casing
Speed sensor board (continuous weighing) etc... adapted to a use nearest the work station as possible in harsh
Summation board  1 speed sensor input to be used with any type of 24 V D environments.
supplied detector (selection by jumper): Moreover, with its PLC-oriented software workshop, a specific
application can be developed to perfectly adapt to:  I 410 D-T: terminal for tabletop use.
Allows the summation of 2 or 3 analog or digital measurement • NPN/PNP commutation threshold ................................. 10 - 14 V
channels. • 2-wire type - Load resistance............................................. 2.2 k  existing equipment (PLC, field bus, protocol, ...), All these terminals are available in digital or alphanumeric
 specific functionalities (production chain peripheral keyboard versions.
The summed channels can correspond to internal measurement  1 input (selection by jumper)
boards or internal transmitters. commands, data acquisition and processing, ...),
• Logical input:
Possibility to have 2 measurement boards and one summation Input impedance.............................................................................. 17.2 k  IT interconnections (outsourced information feedback and Trade Use certification
Input tension ....................................................................................... 24 V DC processing).
board in every terminal (analog/digital combination possible).  Certification according to the 2009/23/CE Directive relative
• 2-wire detector input - Impedance ............................. 1.5 k to Non Automatic Weighing Instruments: 6 000 divisions
Depending on the application, the terminal can be connected to
Power supply • 4-20 mA input - Impedance ............................................... 150  various external weight transmitters or be equipped with internal (single or double-range) and 3 000 divisions (multi-division).
 I 410 D-S: 24 V - 1.1 A internal power  1 isolated logical output: measurement boards that turn the terminal into a multi-channel
 Certification according to the MID 2004/22/CE Directive rela-
weight indicator.
 I 410 D-T: 24 V - 1.1 A or 2.3 A tabletop external power • Max. power............................................................................................ 125 mA tive to Automatic Weighing Instruments:
• Max. tension ......................................................................................... 48 V DC • Checkweighers: XIII(1) et Y(a) classes
 I 410 D: DIN rail 24 V - 2 A external power
• Ron ................................................................................................................ 25  European compliance • Continuous totalisers (dynamic weighing): 0.5 and 1 classes
* Or 8 high impedance.load cells ** sur sorties • Discontinuous totalisers (with non constant weigh): 0.25,
 2004/108/EC directive relative to Electromagnetic Compati-

04-41-00-1 FT - 03/2014
0.5, 1 and 2 classes.
bility.
Your specialist Illustrations not contractual. Precia-Molen reserves the right to alter the characteristics of the equipment described in this brochure • Automatic gravimetric filling: functional accuracy class X(x)
at any time..
 2006/95/EC Directive relative to Low Tension equipments. x = 0.2 - 0.5 - 1 or 2 depending on on-site test results.
PRECIA-MOLEN Headquarters & Factory
BP 106 - 07000 Privas - France
Tel. 33 (0) 475 664 600
Fax 33 (0) 475 664 330
E-MAIL [email protected]

RCS: 386 620 165 RCS Aubenas

Design Physical features**
Keyboard types Panel-mounted model
3 types of touch keyboard: Cut-out dimensions
• Digital standard Graphic screen
• Alphanumeric AZERTY
• Alphanumeric QWERTY The I 410 terminal offers a backlit 240 x 128 multi-function • Front panel waterproofness:
graphic screen that ensures a user-friendly interface for the user. IP 65
• Weight: approx. 3 kg
Accessibility at any moment of the metrological screen for all the
weighing instruments that make up the various transmitters that
are connected to each.
3 A multilingual display is possible with various fonts.

WWW.PRECIAMOLEN.COM
1 Electrical features
5 Max. thickness: 6 mm
2
 Regulated power supply
• Power tension................................................................. 12 - 30 V DC Casing model
• Consumption .................................................................. 5 W*
6 • Connection ....................................................................... Spring terminals Dimensions

Environment
 Temperature range
• In operation ....................................................................... - 10 °C / + 40 °C
• Storage ................................................................................ - 20 °C / + 60 °C • Waterproofness: IP 66
• Weight: approx. 4.3 kg
External keyboard / bar code reader
1
Possibility to connect a PC-type keyboard or a bar code reader
2 (on 8pt DIN female plug).

4 USB memory kit

• Saving / restoring metrological parameters.
6
• Terminal software upgrades (system, application,
messages, languages).
• Saving / restoring application files and results.
Support assembly

1
2

6 Tabletop model

1. Access to metrological data display.

• Front panel waterproofness: IP 65
2. Access to work level selection (User, Operator, Supervisor,
• General waterproofness: IP 34
Engineer) managed by password as well as the screen light
and contrast adjustment. • Weight: approx. 3 kg

3. 10 multi-function keys, F1 to F10, defined in the application

and captioned by the display.
4. Access to a selection of special characters (entry mode).
5. 4 multi-function keys, SF1 to SF4, defined in the application
and captioned by the display.
6. Validation key.
* Excl. Inputs/Outputs options. ** Dimensions in mm.