360 Robot Vacuum Cleaner User ManualDear customers: Thank you for choosing the artificial intelligent (A) 360 Robot vacuum cleaner! Please read all the operation instructions carefully before using your Robot and keep the operating instructions for future reference, We know you will ove this vacuum! It Is @ highly intellgent robotic vacuum cleaner that utllzes high-precision radar and an array of other sensors, all working together through navigation algorithms to create and follow sophisticated, accurate maps and plans. Sweeping, vacuuming, and ‘mopping, alin one, with the end resuk being regular, efficient full indoor cleaning that can be performed withaut the need of any human assistance In case of any issues during use, please contact 360 after-sales service center: +86 400-6822-360 For more information, please visit 360 oficial website: https://smart.360.cn/en You can also scan the following QR code to follow 360 offical WeChat account: The product described n this document may not be exactly the same as the actual product. Therefore, the actual product shal prevail 360, reserves the rights co undate the product without prior noticeSafety Instructions Before using the product, please exercise caution and observe the following basic safety precautions: + Please read all cont Instruction carefully and operate the product as in Jease properly keep the instruction for future reference. + Any operation that does not conform te the instruction may cause serious personel injury or damage to the product «This product can only be used with the adapter, battery, and charging dock delivered with the product, Othenwise, it will cause product damage, electric shock, or fire caused by high voltage, . sary is damaged. Contact the 360's after-sales service department to ‘cept for the repair technicians designated or authorized by 360, no one shall disassemble, lease stop using the product if the robot or any acce purchase or replace separatel repair, or modify this product. + Do not use the product in a suspended environment (such as second floor ina lof, open bakony, and tops of furniture) without a protective fence to avoid accidental falling ofthe robot, which may cause personal injury + This product is only used for floor cleaning in home environment. Do not use it in outdoor (such as open balcony), none (such as sofa), commercial or industrial environments. + Before using the product, please collect the cables in your house to prevent them from tripping the product + Please put away fragile terns and debris (such as vases and plastic bags) on the floor to prevent the vacuum cleaner from being obstructed or slightly collided during the operation, which may cause damages to the valuables, = Do net place the charging dock close to heat sources (such as radiators} + People with physical, mental or sensory disabllties and small children are prohibited to use or operate this product. + This product is not a toy. Small children and pets should be supervised when the robot is operating + Place the main brush cleaning tool in an area that children cannot reach = Do net place any abjects (including children and pets) on the stationary or maving rot + Do not use the product in a room where infants or young children are sleeping, + Do not let the hair fingers or any other parts of human or pets get close to the dust suction port when the robot 's working, + Do not use this product ro clean long-haired carpets (some dark carpets may not De cleaned properly)+ Do not use this product to vacuum hard or sharp objects (such as decoration wastes, glass, and iron nails) + Do not carry the robot with the bumper or the top cover as a handle + Clean or maintain the robot and charging dock only when the product is turned off or powered off. + Do not use this product to clean burning or smoking objects (such as cigarette butts that are not extinguished). + Do not use this product in an environment with a temperature above 40°C or below 0°C. + Do not use this product on a floor with any liquids and sticky substances. + Do not wipe this product with a wet cloth or directly wash the robot or charging dock under running water. + Do not use the mopping function on the carpet or the top of the furniture. + After unpacking, you may find that there are water stains or residual water product, which is caused by the special water tank affect the use of the product, + Ifyou need to transport this product, please ensure th packaging container for transportation + Ifyou wil not use this product for 2 long period, turn off the robot after its fully charged and put place. Charge the product at least once every three months to avoid ever-discharge of the battery. + Disconnect the product fram the charging dock, turn it off, and remove the battery before disposal + Please strictly follow the local laws and regulations for battery recycling and disposal + Itis prohibited to burn the product even i the product is severely damaged, because the burning battery may explode. 1se this product in accordance with the instructions. The labllies for any loss or injury caused by improper use shall be solely borne by the user. + Ifthe battery pack’ leaking, avoid the liquid to contact with the skin or eyes. Ifa contact has been made, wash the affected area with copious amounts of water, and seek medical advice. Place the battery ina sealed plastic bag and dispose of safely according to local environmental regulations e water tank or water outlets o dis a normal phenemenon, Th rops ont in the factory before delivery robot is turned off. is recommended to use the original the product in a cool and dryPacking List 7 ™ Q =e Main unie(main brush 1 PCS, Charging er tank assembly (mopping dust bin x 1 PCS, fker = 1 Pt ped x 1 PCS and filter cartridge x and side brush * 1 pair) x 1 PCS Pcs) *1 PCS, @360 Remote control 1 PCS Tips: A pair of side brushes, a set of fits, and the battery pack have been installed in the robot,Product Appearance Main unit (ae) CLEAN button Press tis button to enable/pause cleaning Press and held this butte to the charging dock to make the robot go back Press and hold this button for 8s to reset the Wi.Main unit Clif sensors, Charging + contact points Omnidirectional wheel Battery cover Main brushWater tank Charging dock Water inet eS rower aor = ‘Signal emission area Water tank ° release buckle ¢ mopping pat GE — adopter port Charging contact poines tthe rubber plug to avord water leakage due to inadequate sealing Iris foroden to ade unefcalceaner te ato coroson and blockageDust bin Advanced fier Dust bin release buckle Note Use one hand te press and hol the bin celase buckle and the ether han to open the cover to open the dust binInstallation Instructions ) Connect the power adaptor the charging dock. 2) Place the charging dack on the horizontal floor and connect the power supply Note Please ensure tat there arene cts pliced witun on mate fom the lf 3 by tne rot dng chaning which ll nee wradoce on The cargngdockccator sold wren ti arergied nd sehen the robetis neg charged 3) To ensure that the robot can work and go back te the charging dock normally, do not move the charging dock randomly and frequently. ‘The caring dock sh 4) Before use, remove the protection strip ensure the normal use of the product. nthe bumper to icesin an reo without te ————— Ura OTT Floor5)Turn on the robot The power switch is the robot on (press ter ihe king the side ofthe robot, press "I to turn willturn it off, complied, you are owerng toto act the rex kenrg ous ‘or a rg pared slate power ofthersoctta ommended charge the product Tyoumilnct seine protect the bates Power Switch 6) Charging Method 1: Turn on the robot and place it within 1m in front ofthe charging dock After the start-up voice is finished, press and Nold the CLEAN button for 3 seconds, then release, the robot will automaticaly search for the chargi dock and proceed to charging. Method 2: Turn on the rabot and place it within 1m in front (of the charging dock After the start-up voice is finished, press the cherging button on the remote control, the robot wil automatically Search for the charging dack and pracet to charging, Method 3: Turn on the robot and place it on the charging dock with the charging contact points aligned. At this time, the power indicator on the charging dock becomes off and the arts to charge and generates @ voice message, bot Obrerwise te charging elect might be al the caring dock Fs bel 508, Method 4: Insert the power adapter plug into the DC power, jack on the side of the robot, and connect the other end to the power supply (please disconnect the port after charging. ‘otherwise the robot will nat work) cop the charg dockin the energies stats, Otherwise the ebot wll net go ‘whe using : crarang dockto memorize the return rote {the robot doesnt leat om he ttmay ake along period o automaticaly go bacetothe careee {doce hich sa rormal sreromenen) ‘Wher using the product fo" the st in, compte exaust then filly charge for fe hours to werd battery Ie he robcecanret go backJownload and instal the app. Configure the network of the product as