Ex panelboard for hazardous areas

Zone 1, 2, 21 and 22

AGP17
Explosion-protected panelboards

Safe. Reliable. Efficient.

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 1

 AGP17 Explosion-protected
panelboards
Energy distribution, switching and control assembly

A robust solution for power distribution in Zone 1, 2,

21 and 22 hazardous areas

Eaton's Crouse-Hinds series AGP17 distribution and control board is certified for
hazardous areas with Ex de protection.
Ex e increased safety Stanless Steel/GRP enclosure ensures maximum
performance and corrosion resistance. A wide range of internal encapsulated
components are available to meet any custom requirement.

Factory sealed assembly 316LSS/GRP enclosure

eliminates flame path • High level of corrosion and chemical
• Easy installation and reduced labor resistance, ideal for off-shore
cost applications and other aggressive
• Reduced maintenance cost by hazardous areas
eliminating Ex d inspections
according to IEC60079-17, which Modular design
requires inspections within every • Simple expansion options
three years • Easily replace encapsulated
components
Ex e enclosure eliminates
Ex d bolts Ex d MCCB up to 250A
• Easy to open and access • Covers wide range of Ex design
• Improves safety by avoiding the applications
risk of compromising safety dUe to
missing, broken, stripped or galled Lightweight and compact
bolts design
• Easy to install
• Advantage for off-shore applications

2 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

AGP17 Explosion-protected
panelboards
Energy distribution, switching and control assembly

Applications
Designed to provide overcurrent and short circuit protection for low voltage power,
lighting, and heating circuits in hazardous and harsh industry.

The AGP17 is an ideal choice for high demanding applications within hazardous
and harsh locations, such as marine offshore platforms, refineries, chemical and
petrochemical plants, mining, food processing, pharmaceutical plants, corrosive and
industrial processing facilities.

Certifications and Compliance Product features

• SEV 21 ATEX 0559X ; IECEx NEP • ATEX, IECEx
18.0001X • Ex de type explosionproof protection
Marking accd. to 2014/34/EU • Modular enclosure and internal
• II 2 G Ex db eb ia/ib mb [ia/ib] IIC components
T4~T6 Gb
• Up to 250A rated encapsulated
• II 2 D Ex tb IIIC T80°C Db IP66
MCCB is available for main breaker.
Marking accd. to IECEx • Wide range of encapsulated
• Ex db eb ia/ib mb [ia/ib] IIC T4~T6 components including MCB,
Gb RCD,RCBO, contactor, overload relay,
• Ex tb IIIC T80°C Db IP66 etc.
Degree of protection accd. to IEC 60079 • Test function available for RCD/
• IP66 RCBO.
Permissible ambient temperature
• –20 °C up to +40 °C
• –40 °C up to +55 °C (option)

Materials and finishes Electrical Ratings

• Enclosure material: SS316L • Rated voltage up to 690V
(standard), SS304 (optional), • Rated current up to 315A
GRP(glass fiber reinforced plastic)
• Terminal cross section up to 240mm²
• Stainless steel enclosure finish:
Electro-polish (standard), mechanical
brush (optional), Painting or powder
coating are also optional
• Material thickness(316L/304 only)
1.5mm (standard), 2mm (optional)

CROUSE-HINDS
CROUSE-HINDS SERIES
SERIES AGP17
AGP17 EXPLOSION-PROTECTED
EXPLOSION-PROTECTED PANELBOARDS
PANELBOARDS
EATON'S CROUSE-HIND 33
 175 135
315 135 210

316L enclosure with dimension for panelboard

315
315
175 135

175 135
135 210
315
315 135 210
315

315
315

632
315 135 210 Size 2 Deep

315
Size 1 Size 2 & Size 135
2 deep 210
135 210 315
315

315 135 210

315

632
135 210
315

135 210
315
949
632

315 135 210

632

Size 3 Deep
315 135 210 Size 4 Deep
Size 3 & Size 3 deep Size 4 & Size 4 deep
949

Dimensions in mm 135 210

315

Note: Enclosures can be connected for panel building on request.

949

Dimensions of enclosures
949

Dimension
Type
(H x W x D in mm)
Size 1 315 x 175 x 135
Size 2 315 x 315 x 135
Size 2 deep 315 x 315 x 210
Size 3 632 x 315 x 135
Size 3 deep 632 x 315 x 210
Size 4 949 x 315 x 135
Size 4 deep 949 x 315 x 210
Note: Enclosures can be connected on request .

4 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

GRP enclosure with dimension for panelboard
GHC7 Enclosure Size1(271x134x136) GHC7 Enclosure Size2(271x271x210) GHC7 Enclosure
0.5 Unit / Low cover 1 Unit / High cover Size2(271x271x136) 1 Unit /
Low cover

134 271
120 136 257 136 210
271
247

271
Size 2 Deep

Size 1 Size 2 & Size 2 deep

271
271 257 136
257 136 210

260
260
544

817
273
260

Size 3 Deep
260

Size 3 & Size 3 deep Size 4

Dimensions in mm

Note: Enclosures can be connected for panel building on request.

Dimensions of enclosures
Dimension
Type
(H x W x D in mm)
Size 1 271x134x136
Size 2 271x271x136
Size 2 deep 271x271x210
Size 3 544x271x136
Size 3 deep 544x271x210
Size 4 817x271x136
Note: Enclosures can be connected on request .

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 5

Ex-d built-in components - MCB Modules

Size 1 Size 2 Size 3

MCB 0.5A to 63A

cations and Compliances
Marking accd. to ATEX/IECEx Ex db eb IIC Gb
Application temperature -40˚C up to +64˚C / -20°C up to +64˚C
Electrical Ratings
Rated voltage Main contact max. 440 V AC
Auxiliary contact max. 250 V AC
Rated current Main contact 0.5A to 63A
Auxiliary contact max. 5 A
Rated switching capacity 2/3 phase max. 15kA
Back-up fuse depend on rated current up to 125 A
Connection terminals Main contact 25 mm2
Auxiliary contact 2.5 mm2
cations
Weight 0.74 kg size 1
1.13 kg size 2
1.49 kg size 3

Enclosure colour black

Options Aux. contact; signal contact; shunt trip; undervoltage release
Padlocking capability Padlockable at off postion

MCB Ordering Logic

CPD161 2 1 1 2 C 630 10 1 2 1 1
CPD161 -2 -1 1 2 -C 630 10 -1 2 1 1 N
Internal Internal industrial Rated
Product Enclosure MCB Tripping Aux. Signal Shutting Undervoltage
components MCB products Rated current switching Rated contactor contactor release
Group size
Product Enclosure size characteristicMCB Tripping Rated Aux. Signal Shutting Undervoltage release
Internal
code componentsseries code Internal MCB switching
capacity Tamb
Group size size characteristic current contact contact release release
CPD161 2 Size1/2Pole 1 MCB 1 Eaton/PL10~1P(230/400V)、1 1 Pole B B capacity 005 0.5A 160 16A 15 capacity
15kA 0 NA 0 NA 0 NA 0 NA
Size2/3Pole 2~4P(400V) 50/60Hz 2 2 Pole C C capacity 010 1A 200 20A 10 10kA 1)1 1NO 1 1C/O 1 12-110V 1 115VAC
CPD161 32 Size 1 1 MCB 1 Eaton/PL10~1P(230/400V)、 1 1Pole B B capacity 005 0.5A 15 15kA 0 NA 0 NA 0 NA 0 NA N
Size3/4Pole
43 Size 2 Eaton/FAZ~1P(240/415V) 、 3 3 Pole D D capacity 6kA10kA 2 11NC 110-415V1 115VAC
2 230VAC
2 2~4P(415V) 50/60Hz2~4P(400V) 50/60Hz C C 2A
2 2Pole020 capacity 25A 1A06 10
250 010 1NO 1 1C/O 1212-110V -20˚C up to
4 Size 3 4 4~ Pole
2 Eaton/FAZ D D3A
1P(240/415V)、 3 3Pole030 capacity 32A 2A 06 6kA 3 21C/O
320 020 1NC 3 400VAC
2 110-415V 2 230VAC +64˚C
Enclosure Size 1 2P 2~4P(440V) 50/60Hz 4 4Pole040 4A 400 030 40A 3A 4 32NO
1C/O 3 400VAC Blank
1P 060 6A 500 040 50A 4A 1NO+1C/O
5 4 2NO -40˚C up to
1P+ Aux. contact 100 10A 630 060 63A 6A 6 51NO+1NC
1NO+1C/O +64˚C
(1NO+1NC or 1CO or 2CO) 130 13A 100 10A 6 1NO+1NC
1P+ Signal contact 1CO and/or 130 13A
Aux.contact 1CO) 160 16A
DimensionEnclosuredrawing
Size 2 3P (mm) / Connection diagram 200 20A
2P+ Aux. contact 250 25A
(1NO+1NC or 1CO or 2CO) 320 32A 1 3 5 7
2P+ Signal contact 1CO and/or Product type A B400 40A
Aux.contact 1CO)
CPD161-2 42 54500 50A
2P+ shutting release contact 630 63A
2P+ undervoltage release contact CPD161-3 60 72
Enclosure Size 3 4P CPD161-4 96 108
3P/4P+ Aux. contact
2 4 6 8
(1NO+1NC or 1CO or 2CO)
3P/4P+ Signal contact 1CO and/or
Aux.contact 1CO)
3P/4P+ shutting release contact
3P/4P+ undervoltage release contact
1)
FAZ only
Contact Eaton for other configuration EATON'S CROUSE-HINDS DIVISION AGP17 EXPLOSION-PROOF DISTRIBUTION BOARDS 3
6 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS
 3 Size2/3Pole 2~4P(400V) 50/60Hz 2 2 Pole C C capacity 010 1A 200 20A 10 10kA 1 1NO 1 1C/O 1 12-110V 1 115VAC
4 Size3/4Pole 2 Eaton/FAZ~1P(240/415V) 、 3 3 Pole D D capacity 020 2A 250 25A 06 6kA 2 1NC 2 110-415V 2 230VAC
2~4P(415V) 50/60Hz
4 4 Pole 030 3A 320 32A 3 1C/O 3 400VAC
040 4A 400 40A 4 2NO
060 6A 500 50A 5 1NO+1C/O
100 10A 630 63A 6 1NO+1NC
130 13A

Dimension drawing (mm) / Connection diagram

1 3 5 7
Product type A B
CPD161-2 42 54
CPD161-3 60 72
CPD161-4 96 108

2 4 6 8

EATON'S CROUSE-HINDS DIVISION AGP17 EXPLOSION-PROOF DISTRIBUTION BOARDS 3

AGP17 Stainless Steel Panelboard with Painting

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 7

 Ex-d built-in components - MCCB Modules

GHG 6277

MCCB 20A to 250A

cations and Compliances
Marking accd. to 2014/34/EU D II 2 G Ex de IIB/IIC Gb
Marking accd. to IECEx Ex de IIB/IIC Gb
Functional temperature -20°C up to +70°C
Application temperature1 ) -20°C up to +55°C (IIC / IIB based on AGP17)
Limits of service temperature -20°C up to +110°C (IIC / IIB)
Component degree of protection accd. EN 60529 IP20
Storage temperature -20°C up to +55°C in original packing
Electrical Ratings
Safe Isolation to EN 61140 between aux contacts and main contacts 500 VAC
between aux contacts 300 VAC
Rated impulse withstand voltage main contacts 8000 V
auxiliary contacts 6000 V
Rated operating voltage Ue 440 V
Rated switching capacity Icu 400/415/440V (50/60Hz) kA/cos y 10 kA/0.25 or 25 kA
500VDC 10 kA
Rated current In main contact 20A,25A,32A,40A,63A,80A,100A,125A,160A,200A or 250A
aux. contact max. 5 A
Adjustable setting range Ir 0.8 to 1.0 x rated current In
Short current protection Ii = 10 x In
Utilization category to IEC/EN 60947-2 A
Making/breaking capacity at rated current up to 400 V AC1 & AC3
Connecting terminals main contact 1 x 4.0 mm² up to 1 x 185 mm²
Rated voltage aux. contact max. 500 V AC
Rated current aux contact AC15 Ie (up to 230 V) / DC13 Ie (up to 24 V) 4A/3A
AC15 Ie (up to 400 V) / DC13 Ie (up to 60 V) 2 A / 1.2 A
AC15 Ie (up to 500 V) / DC13 Ie (up to 110 V) 1 A / 0.8 A
DC13 Ie (up to 220 V) 0.3 A

Total opening delay on short circuit < 10 ms

cations
Weight 10.5 kg - 4-pole / 10 kg - 3-pole
Enclosure material Polyamide
Built-in position Vertical and rotated 90 deg in all directions
Release system Thermomagnetic release

1)
The limits of the operating temperature range and the max. permissible temperature rise of the components (functional temperature) have to be taken into account.

4 AGP17 EXPLOSION-PROOF DISTRIBUTION BOARDS EATON'S CROUSE-HINDS DIVISION

8 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS
 MCCB Ordering Logic
GHG 6277 0 01 R0 1 3 2

Product shortcircuit Rated

guration Accessories Version # of poles
Group current current

GHG6277 0 MCCB only 00 MCCB only R0 E-series 1 3 Pole 3 IEC 10 kA@ 440V 1 20 A1)
1 MCCB + 1NO 01 Shunt trip 24V AC/DC + early make 1NO (standard) 2 4 Pole 4 IEC 25 kA@ 440V AC 2 25 A1)
R1 A-series
2 MCCB + 1NC 02 Shunt trip 110V-130V AC/DC + early make 1NO (@ 10 kAonly) 10kA@500V DC 3 32 A1)
3 MCCB + trip 03 Shunt trip 208V-250V AC/DC + early make 1NO R2 E-series 4 40 A1)
indicator 1NO 04 Shunt trip 380V-440VAC/DC + early make 1NO (Low current) 2 63 A
4 MCCB + 1NO/1NC 05 Uv release 24V 50/60Hz + early make 1NO 3 80 A
+ trip indicator 1NC 06 Uv release 110V-130V 50/60Hz + early make 1NO 4 100 A
5 MCCB + 2NO 5 07 Uv release 208V-240V 50/60Hz + early make 1NO 5 125 A
6 MCCB + 2NC 6 08 Uv release 380V-440V 50/60Hz + early make 1NO 6 160 A
7 MCCB + 2NO 09 Uv release 480V-525V 50/60Hz + early make 1NO 7 200 A
+ trip indicator 1NO 10 Shunt trip 24V AC/DC 9 250 A
8 MCCB + 2NC 11 Shunt trip 110V-130V AC/DC
+ trip indicator 1NO 12 Shunt trip 208V-250V AC/DC
9 MCCB + 1NO + 1NC 13 Shunt trip 380V-440VAC/DC
+ trip indicator 1NO 14 Uv release 24V 50/60Hz
15 Uv release 110V-130V 50/60Hz
16 Uv release 208V-240V 50/60Hz
17 Uv release 380V-440V 50/60Hz
18 Uv release 480V-525V 50/60Hz
19 Early make aux. switch 2NO
20 Uv release 24V DC
1)
Available for R2 E-series only

Dimension drawing (mm) / Connection diagram

180
(N) 2 4 6
6.4

X 160 12.5
X

X
X

N 1/2 3/4 5/6

X 365
382

(N) 1 3 5

A/E series
N 2/1 4/3 6/5

203 205.3

EATON'S CROUSE-HINDS DIVISION AGP17 EXPLOSION-PROOF DISTRIBUTION BOARDS 5

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 9
 Ex-d built-in components - RCD modules

Size 1 Size 2 Size 3

RCD 30mA to 300mA (16A/25A/40A/63A)

cations and Compliances
Marking accd. to ATEX/IECEx Ex db eb IIC Gb
Application temperature -25˚C up to +55˚C / -20˚C up to +55˚C
Electrical Ratings
Rated voltage Main contact max. 415 V AC
Auxiliary contact max. 250 V AC
Rated current Main contact 16A to 63A
Auxiliary contact max. 5 A
Rated residual operating current 30mA, 100mA or 300mA
Back-up fuse depend on rated current up to 100 A
Connection terminals Main contact 25mm2
Auxiliary contact 2.5 mm2
cations
Weight 0.74 kg Size 1
1.13 kg Size 2
1.49 kg Size 3

Enclosure colour black

Options Aux. contact; signal contact
Padlocking capability Padlockable at off postion

RCD Ordering Logic

Internal Rated residual
Product Rated Aux. Signal
Enclosure size Internal components code Internal RCD industrial RCD operating Tamb
Group current contact contact
CPD161 2 2 1 2 size 630 current 030 1 0
CPD161 2 Size 1 2 RCD Internal 1 Eaton / PFIMindustrial
/ 2P or 4P /
Internal 2 2Pole 160 16A1) 030 30mA 0 NA
Rated residual 0 NA N -20˚C up to +55˚C
Signal
Product Group
3 Size 2 Enclosure size components (230V/400V)
RCD / 55˚C3)
/ 50Hzseries
products RCD
4 size
4Pole Rated current
250 25A 100 100mA 2)
1 1C/O Aux. contactor
1 1C/O Blank -25˚C up to +55˚C
operating current contactor
4 Size 3 code 2 Eaton / FRCmM-A / 2P or 4P / 400 40A 300 300mA 2)
TN -20˚C up to +40˚C
CPD161 Enclosure2 Size 1 2P
Size1/2Pole 2 RCD 1(240V/415V)
Eaton/50Hz/ 60Hz / 40˚C 2 2Pole
PFIM 160 630
16A63A
/ 60HZ only 030 30mA 0 NA T -25˚C0up NA
to +40˚C
Enclosure Size 2 2P+ Aux. contact(1CO) 230V(2P)、230/400V(4P) 4 4Pole
3 Size2/3Pole
2P+ Signal contact (1CO) 250 25A 100 100mA 1 1C/O 1 1C/O
2 Eaton/xEffem/60Hz
Enclosure
4 Size 3 4P
Size3/4Pole 400 40A 300 300mA
FRCmM-A 240V(2P)、
4P+ Aux. contact(1CO)
240/415V(4P) 630 63A
4P+ Signal contact (1CO)
1)
FRCmM-A only
2)
Not available for FRCmM-A 63A/2P and 63A/4P
3)
This is max. permissible ambient temperature
Contact Eaton for other configuration

Dimension drawing (mm) / Connection diagram

AC SC
Product type A B 1 3 5 7
CPD161-2 42 54
CPD161-3 60 72
CPD161-4 96 108
2 4 6 8

10 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Ex-d built-in components - RCBO modules

Size 1 Size 2 Size 3

RCBO 6A to 63A (30A/300mA)

cations and Compliances
Marking accd. to ATEX/IECEx Ex db eb IIC Gb
Application temperature -25˚C up to +55˚C / -20˚C up to +55˚C
Electrical Ratings
Rated voltage Main contact max. 400 V AC
Auxiliary contact max. 250 V AC
Rated current Main contact 6A to 63A
Auxiliary contact max. 5 A
Rated switching capacity 2/3 phase 10 kA
Back-up fuse depend on rated current up to 100 A
Connection terminals Main contact 25mm2
Auxiliary contact 2.5 mm2
cations
Weight 0.74 kg size 1
1.13 kg size 2
1.49 kg size 3

Enclosure colour black

Options Aux. contact; signal contact
Padlocking capability Padlockable at off postion

RCBO Ordering Logic

Rated
Rated
Product Enclosure Internal components RCBO Tripping Rated residual Aux. Signal
Internal RCBO switching Tamb
Group size code size characteristic current operating contact contact
capacity
current
CPD161 2 Size 1 3 RCBO 1 Eaton / PLD10 / 1P+N / 230V / 50Hz / 10kA / 55˚C4) / Electronic 2 1Pole+N B B capacity 060 6A 10 10kA 030 30mA 0 NA 0 NA N -20˚C up to +55˚C
2)
3 Size 2 2 Eaton / PL10+PDB / 2P/400V / 50Hz / 10kA / 55˚C / Electronic 4 2Pole C C capacity 080 8A 06 6kA 300 300mA 1 1C/O 1 1C/O Blank -25˚C up to +55˚C
4 Size 3 3 Eaton / PFL10 / 1P+N / 230V / 50Hz / 10kA / 55˚C / D D caoacity 100 10A 100 100mA3) 2 2C/O TN -20˚C up to +40˚C
Enclosure Size 1 1P+N Electromagnetic 130 13A T -25˚C up to +40˚C
2P 4 Eaton / PL10+PBSM / 2P / 230V / 50Hz / 10kA / 55˚C / 160 16A
Enclosure Size 2 1P+N+Aux. contact(1CO) Electromagnetic 2) 200 20A
1P+N+ Sig. contact(1CO or 2CO) 5 Eaton / FRBmM-B / 2P / 240V / 50Hz or 60Hz / 10kA / 40˚C 250 25A
2P+ Aux. contact(1CO) 6 Eaton / FRBm6-B / 2P / 240V / 50Hz / 6KA, only 32A or 40A / 320 32A
2P+ Sig. contact(1CO or 2CO) 40˚C 400 40A
Enclosure Size 3 2P+ Aux. contact(1CO) 1) 7 Eaton / FRBmM-C / 2P / 240V / 50Hz / 60Hz / 10kA / 40˚C 500 50A
2P+ Sig. contact(1CO or 2CO) 1)
8 Eaton / FRBm6-C / 2P / 240V / 50Hz / 6KA, only 32A or 40A / 630 63A
40˚C
1)
PL10+PDB or PL10+PBSM
2)
Enclosure size 3, Utilize philosophy of MCB + RCCB connection in series for 2pole RCBO
3)
Not available for PLD10 & PFL10
4)
This is max. permissible ambient temperature
Contact Eaton for other configuration

Dimension drawing (mm) / Connection diagram

1 3N 1 3

Product type A B
CPD161-2 42 54
CPD161-3 60 72
CPD161-4 96 108

2 4N 2 4

1+PN 2P

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 11

 Ex-d built-in components - Motor Contactors

Size 2

Motor Contactors
cations and Compliances
Marking accd. to ATEX/IECEx Ex db eb IIC Gb
Application temperature -20˚C up to +50˚C
Electrical Ratings
Rated voltage Main contact max. 440V AC
Auxiliary contact max. 415V AC
Rated current Auxiliary contact max. 5A
Main contact 6A 9A 12 A 16 A
Rated capacity AC-3 220/240V 1.5 kW 2.2 kW 3 kW 3 kW
accd. to EN 60947-4-1 380/415V 2.2 kW 4 kW 5.5 kW 7.5 kW
440V 3 kW 4 kW 5.5 kW 7.5 kW
Connection terminals Main contact 25 mm2
Auxiliary contact 2.5 mm2
cations
Weight 3 pole 1.13 kg size 2

Enclosure colour black

Options Aux. contact

Motor contactor Ordering logic

CPD161 -3 -6 1 -09 -AC230 -2 -1 N

Internal
Product Enclosure Rated Aux. contactor Aux. contactor
components Internal contactor Control voltage(A1-A2) Tamb
Group size current NO number NC number
code

CPD161 3 Size 2 6 Motor contactor 1 Schneider/Tesys 06 6A AC024 AC24 V DC012 DC12 V 0 NA 0 NA N -20˚C up to +50˚C
K series 09 9A AC048 AC48 V DC024 DC24 V 1 1NO 1 1NC Blank -25˚C up to
+50˚C
12 12A AC110 AC110 V DC048 DC48 V 2 2NO 2 2NC
16 16A AC230 AC230 V DC060 DC60 V
AC240 AC230/240 V DC110 DC110 V
AC400 AC380/400 V DC220 DC220 V
AC440 AC440 V

Dimension drawing (mm) / Connection diagram

7.5x5.5

Product type A B A1 1 3 5 13
CPD161-3 60 72

A2 2 4 6 14
166
177

A
B 113

12 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Ex-d built-in components - Installation Contactors

Size 2

Installation Contactors
cations and Compliances
Marking accd. to ATEX/IECEx Ex db eb IIC Gb
Application temperature -25˚C up to +64˚C / -20˚C up to +64˚C
Electrical Ratings
Rated voltage Main contact max. 415V AC
Auxiliary contact max. 415V AC
Rated current Auxiliary contact max. 5A
Main contact 20 A
Rated capacity AC-1 220-240V 7.6 kW
accd. to IEC/EN 60947-4-1 380-415V 13.5 kW

Rated capacity AC-3 220V 2.2 kW

accd. to IEC/EN 60947-4-1 230-240V 2.5 kW
380-415V 4 kW
Connection terminals Main contact 25mm2
Auxiliary contact 2.5 mm2
cations
Weight 1.13 kg size 2
1.49 kg size 3

Enclosure colour black

Installation Contactor Ordering Logic

CPD161 -2 -5 1 2 -50 230 -3 1 0 1 N

Internal Internal Installation Control

Product Enclosure Rated Main NO Main NC Aux. NO Aux. NC
components installation contactor Pole voltage Tamb
Group size current contacts contacts contacts contacts
code contactors number (Coil voltage)

CPD161 3 Size 2 5 Installation 1 Eaton/Z-SCH installation 2 2Pole 20 20A 024 24V AC 0 0NO 0 0NC 0 0NO 0 0NC N -20˚C up to +64˚C
contactor contactor 4 4Pole 230 230V AC 1 1NO 1 1NC 1 1NO 1 1NC Blank -25˚C up to
+64˚C
2 2NO 2 2NC
3 3NO 3 3NC
4 4NO 4 4NC
Enclosure Size 2 20A rating

Dimension drawing (mm) / Connection diagram

7.5x5.5
Product type A B A1 1 3 5 7 31 43
CPD161-3 60 72

A2 2 4 6 8
32 44
166
177

A
B 113

EATON'S CROUSE-HINDS DIVISION AGP17 EXPLOSION-PROOF DISTRIBUTION BOARDS 9

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 13
 Ex-d built-in components - Thermal Relays

Size 2

Thermal Relays
cations and Compliances
Marking accd. to ATEX/IECEx Ex db eb IIC Gb
Application temperature -20˚C up to +40˚C
Electrical Ratings
Rated voltage Main contact max. 600V AC
Auxiliary contact max. 600V AC
Rated current Main contact 12.5A
Auxiliary contact max. 5 A
Connection terminals Main contact 25mm2
Auxiliary contact 2.5mm2
cations
Weight 3 pole 1.13 kg size 2

Enclosure colour black

Thermal relay Ordering Logic

CPD161 3 4 1 02 N
Rated voltage Rated current
Product Group Enclosure size Internal components code Tamb
(production series) (Triping current)
CPD161 3 Size 2 4 Thermal relay 1 Eaton/XTOD/CC1 Thermal relay 01 0.3~0.45A N -20˚C up to +40˚C
02 0.45~0.67A Blank -25˚C up to +40˚C
03 0.67~1.0A
04 1.0~1.5A
05 1.4~2.1A
06 1.8~2.7A
07 2.4~3.6A
08 3.5~5.0A
09 4.0~6.0A
10 5.5~8.5A
11 8.5~12.5A

Dimension drawing (mm) / Connection diagram

7.5x5.5

1 3 5 97 95
Product type A B
CPD161-3 60 72
166
177

2 4 6 98 96

A
B 113

10 AGP17 EXPLOSION-PROOF DISTRIBUTION BOARDS EATON'S CROUSE-HINDS DIVISION

14 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS
Ex e built-in components - Busbar

Busbar system
Busbar
Certification and compliances
ATEX / IECEx certificate SEV 21 ATEX 0558U / IECEx_NEP_21.0007U
Marking according to ATEX / IECEx Ex eb IIC Gb
Permissible ambient temperature -55˚C up to +55˚C

Electrical Ratings 250A

Rated voltage 690V
Rated current 250A
Rated short time current/1s 4kA
Rated short circuit current 35kA
Rated cross-section 60 mm²
Wire cross-section 1.5 mm² up to 185 mm²
Overall length of unit Up to 6300 mm

Electrical Ratings 315A

Rated voltage 690V
Rated current 315A
Rated short time current/1s 9kA
Rated short circuit current 47kA
Rated cross-section 120 mm²
Wire cross-section 1.5 mm² up to 185 mm²
Overall length of unit Up to 6300 mm

EATON'S CROUSE-HINDS DIVISION AGP17 EXPLOSION-PROOF DISTRIBUTION BOARDS 9

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 15
Built-in components - Pushbutton

DRT 1 x 2-pole DRT 4 x 1-pole DDT 2 x 1-pole DDT 2 x 2-pole

Technical data
Ex-pushbutton DRT and double pushbutton DDT
Marking accd. to 2014/34/EU II 2 G Ex de IIC/IIB Gb / I M2 Ex de I Mb
EC-Type Examination Certificate IBExU 14 ATEX 1030 U
IECEx Certificate of Conformity IECEx IBE 14.0005U
Marking accd. to IECEx Ex de IIC Gb
Ex de IIB Gb
Ex de I Mb
Operating temperature –45 °C up to +80 °C (IIC)
–60 °C up to +80 °C (IIB)
Application temperature1) –45 °C up to +55 °C (IIC)
–60 °C up to +55 °C (IIB)
Rated voltage 500 V AC
Rated current 16 A
Rated current with gold contact points 0.4 A
Rated making-/rated breaking capacity AC-15: Ue 250 V / Ie 6 A
accd. EN 60947-5-1 Ue 500 V / Ie 4 A
DC-13: Ue 24 V / Ie 6 A
Ue 220 V / Ie 1 A
Degree of protection accd. to EN 60529 IP66 (installed condition)
Type of mounting DIN rail mounting
Enclosure colour grey
Gasket material Neoprene (standard), Fluorsilikon or Viton on request
2-pole version
Connecting terminals 2 x 2.5 mm2
Dimensions (L x W x H) 59 x 31 x 45 mm
Weight 0.15 kg
4-pole version2)
Connecting terminals 4 x 2.5 mm2
Dimensions (L x W x H) 59 x 73 x 45 mm
Weight 0.35 kg
1)
The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into
account.
2)
The 4-pole pushbutton needs two mounting areas.
The actuator will be in the middle of the two mounting areas.

16 2.4.54
CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED
E AT ON
PANELBOARDS w w w . cr ou s e-h i n ds . de
Built-in components - Pushbutton
Ordering code for component (Code 2)

Code Component Code

A Pushbutton, for enclosure mounting DRT

Double pushbutton, for enclosure mounting DDT

CodeCircuit Contacts Code

DRT DDT silver contact points gold contact points
C 2 NC 12 22 12 22 13 16

11 21 11 21

2 NO 14 24 14 24 14 17

13 23 13 23

1 NO + 1 NC 14 22 14 22 15 18

13 21 13 21

4 NC 12 22 32 42 12 22 32 42 20 25

1121 31 41 1121 31 41

1 NC + 3 NO 12 24 34 44 12 24 34 44 21 26

1123 33 43 1123 33 43

2 NC + 2 NO 12 22 34 44 12 22 34 44 22 27

1121 33 43 1121 33 43

3 NC + 1 NO 12 22 32 44 12 22 32 44 23 28

1121 31 43 1121 31 43

4 NO 14 24 34 44 14 24 34 44 24 29

1323 33 43 1323 33 43

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 17

Built-in components - Pushbutton
Ordering code for component (Code 2)

Code Label Inscription Code Inscription Code

D1, D2 0, I, Start, Stop 001 0 002
I 003 II 004
005 STOP 006
START 007 emergency stop 008
LANGSAM 009 SCHNELL 010
EMERG.STOP 011 012
ARRET 014 MARCHE 015
AUF 016 AB 017
Neutral white 018 Neutral green 019
0, I, Arret, Marche 020 UP 024
DOWN 025 ZU 026
ON 027 OFF 028
+ 030 - 031
Neutral rot 033 Neutral yellow 034
EIN 036 AUS 037
AUTO 039 HAND 050
SENKEN 051 HEBEN 052
LINKS 053 RECHTS 054
FAST 055 SLOW 056
RESET 057 OPEN 058

Ordering code for component (Code 2)

Content Circuit Code Ordering code
A B C D1 D2
Pushbutton with silver contact points
Version with standard label (0, I, START, STOP)
2 NC 2 NC 13 DRT 0 13 001 ---
2 NO 2 NO 14 DRT 0 14 001 ---
1 NO + 1 NC 1 NO + 1 NC 15 DRT 0 15 001 ---
4 NC 4 NC 20 DRT 0 20 001 ---
3 NO + 1 NC 3 NO + 1 NC 21 DRT 0 21 001 ---
2 NO + 2 NC 2 NO + 2 NC 22 DRT 0 22 001 ---
1 NC + 3 NO 1 NC + 3 NO 23 DRT 0 23 001 ---
4 NO 4 NO 24 DRT 0 24 001 ---
Double pushbutton with gold contact points
Version with standard label (0, I, START, STOP)
2 NC 2 NC 16 DDT 0 16 001 001
2 NO 2 NO 17 DDT 0 17 001 001
1 NO + 1 NC 1 NO + 1 NC 18 DDT 0 18 001 001
4 NC 4 NC 25 DRT 0 25 001 001
3 NO + 1 NC 3 NO + 1 NC 26 DRT 0 26 001 001
2 NO + 2 NC 2 NO + 2 NC 27 DRT 0 27 001 001
1 NC + 3 NO 1 NC + 3 NO 28 DRT 0 28 001 001
4 NO 4 NO 29 DRT 0 29 001 001

18 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

 Built-in components - Key-operated Pushbutton

SLT 1 x 4-pole SLT 1 x 2-pole

Technical data
Ex-key-operated pushbutton SLT
Code
Marking accd. to 2014/34/EU II 2 G Ex de IIC/IIB Gb / I M2 Ex de I Mb
silver contact points gold contact points
EC-Type Examination Certificate IBExU 14 ATEX 1030 U
13 16
IECEx Certificate of Conformity IECEx IBE 14.0005U
Marking accd. to IECEx Ex de IIC Gb / Ex de IIB Gb / Ex de I Mb
Operating temperature range –45 °C up to +80 °C (IIC) / –60 °C up to +80 °C (IIB)
14 17
Application temperature1) –45 °C up to +55 °C (IIC) / –60 °C up to +55 °C (IIB)
Rated voltage 500 V AC
Rated current 16 A
15 18
Rated current with gold contact points 0.4 A
Rated making-/rated breaking capacity AC-15: Ue 250 V / Ie 6 A / Ue 500 V / Ie 4 A
accd. EN 60947-5-1 DC-13: Ue 24 V / Ie 6 A / Ue 220 V / Ie 1 A
34 44 20 25
Degree of protection accd. to EN 60529 IP66 (installed condition)
33 43 Type of mounting DIN rail mounting
Enclosure colour 21 26
grey
34 44
Gasket material Neoprene (standard), Fluoric Silicone or Viton on request
33 43 Latch point CEAG 1 (others on request)
34 44 2-pole version 22 27
Connecting terminals 2 x 2.5 mm2
33 43 Dimensions (L x W x H) 59 x 31 x 45 mm
32 44 Weight 23 28 0.15 kg
4-pole version1)
31 43 Connecting terminals 4 x 2.5 mm2
32 42 Dimensions (L x W x H) 24 29 59 x 73 x 45 mm
Weight 0.35 kg
31 41
1)
The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account.
2)
The 4-pole pushbutton needs two mounting areas. The actuator wil be in the middle of the two mounting areas.

Ordering code for component (Code 2)

Content Circuit Code Ordering code
A B C D1 D2
Key-operated pushbutton with silver contact points
Version with contact function: lockable/removable/lockable/removable (Code 10)
2 NC 2 NC 13 SLT 0 13 10 ---
2 NO 2 NO 14 SLT 0 14 10 ---
1 NO + 1 NC 1 NO + 1 NC 15 SLT 0 15 10 ---
2 NO + 2 NC 2 NO + 2 NC 22 SLT 0 22 10 ---
4 NC 4 NC 20 SLT 0 20 10 ---
4 NO 4 NO 24 SLT 0 24 10 ---
3 NO + 1 NC 3 NO + 1 NC 21 SLT 0 21 10 ---
1 NO + 3 NC 1 NO + 3 NC 23 SLT 0 23 10 ---
Key-operated pushbutton with gold contact points
Version with contact function: lockable/removable/lockable/removable (Code 10)
2 NO + 2 NC 2 NO + 2 NC 27 SLT 0 27 10 001
4 NC 4 NC 25 SLT 0 25 10 001
4 NO 4 NO 29 SLT 0 29 10 001
3 NO + 1 NC 3 NO + 1 NC 26 SLT 0 26 10 001
1 NO + 3 NC 1 NO + 3 NC 28 SLT 0 28 10 001

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 19

Built-in components - Key-operated Pushbutton
Ordering code for component (Code 2)

Code Component Code

A Key-operated pushbutton SLT SLT

Code Circuit Contacts Code

silver contact points gold contact points
C 2 NC 11 21 13 16

12 22

2 NO 13 23 14 17

14 24

1 NO + 1 NC 13 21 15 18

14 22

4 NC 14 24 34 44 20 25
()
13 23 33 43

1 NC + 3 NO 12 24 34 44 21 26
()
11 23 33 43

2 NC + 2 NO 12 22 34 44 22 27
()
11 21 33 43

3 NC + 1 NO 12 22 32 44 23 28
()
11 21 31 43

4 NO 12 22 32 42 24 29
()
11 21 31 41

Code Function Pushbutton not pressed Key Pushbutton pressed Key Code
D lockable removable lockable removable 10
lockable removable lockable not removable 11
lockable removable not lockable not removable 12
lockable not removable lockable removable 13
not lockable not removable lockable removable 14
not lockable removable auto lockable removable 15

20 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Built-in components - Key-operated Switch

SLS 1 x 2-pole SLS 1 x 4-pole

Technical data
Key-operated switch SLS
Marking accd. to 2014/34/EU II 2 G Ex de IIC/IIB Gb / I M2 Ex de I Mb
EC-Type Examination Certificate IBExU 14 ATEX 1030 U
IECEx Certificate of Conformity IECEx IBE 14.0005U
Marking accd. to IECEx Ex de IIC Gb
Ex de IIB Gb
Ex de I Mb
Operating temperature range –45 °C up to +80 °C (IIC)
–60 °C up to +80 °C (IIB)
Application temperature1) –45 °C up to +55 °C (IIC)
–60 °C up to +55 °C (IIB)
Rated voltage 500 V AC
Rated current 16 A
Rated current with gold contact points 0.4 A
Rated making-/rated breaking capacity AC-15: Ue 250 V / Ie 6 A
accd. EN 60947-5-1 Ue 500 V / Ie 4 A
DC-13: Ue 24 V / Ie 6 A
Ue 60 V / Ie 0.8 A
Ue 110 V / Ie 0.5 A
Switching system engaging – engaging – engaging
Degree of protection accd. to EN 60529 IP66 (installed condition)
Type of mounting DIN rail mounting
Enclosure colour grey
Latch point CEAG 1 (others on request)
2-pole version
Connecting terminals 2 x 2.5 mm2
Dimensions (L x W x H) 59 x 31 x 45 mm
Weight 0.15 kg
4-pole version1)
Connecting terminals 4 x 2.5 mm2
Dimensions (L x W x H) 59 x 73 x 45 mm
Weight 0.35 kg
1)
The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account.
2)
The 4-pole pushbutton needs two mounting areas.
The actuator will be in the middle of the two mounting areas.

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 21

Built-in components - Key-operated Switch
Ordering code for component (Code 2)

Code Component Code

A Key-switch SLS

CodeCircuit Contacts Code

silver contact points gold contact points
2 NO I 0 II 13/23 04 14
()
45° 90° 135° 1424

2 NO 13 23 18 18
I 0 II
()
45° 90° 135° 14 24

4 NO 13 23 33 43 29 25

()
45°90°135° 14 24 34 43

2 NC + 2 NO 13 21 33 41 26 26

()
45°90°135° 14 22 34 42

4 NO 13/23 33/43 27 27
()
45°90°135°
14 24 34 44

Code Contact label Inscription Code

D I 0 II 01
Fern 0 Ort 02
Hand 0 Auto 03

Example for ordering code (Code 2)

Contact system Ordering code
A C D
Key switch with silver contact points and label „I 0 II
04 SLS 5 04 01
05 SLS 5 05 01

22 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Built-in components - Mushroom-head Pushbutton

SGTE 1 x 2-pole SGTE 1 x 4-pole SGT 1 x 4-pole SGT 1 x 2-pole SGT 1 x 4-pole

Technical data
Ex-mushroom-head pushbutton (emergency stop „SGTE“ and normal version „SGT”)
Marking accd. to 2014/34/EU II 2 G Ex de IIC/IIB Gb / I M2 Ex de I Mb
EC-Type Examination Certificate IBExU 14 ATEX 1030 U
IECEx Certificate of Conformity IECEx IBE 14.0005U
Marking accd. to IECEx Ex de IIC Gb
Ex de IIB Gb
Ex de I Mb
Operating temperature range –45 °C up to +80 °C (IIC)
–60 °C up to +80 °C (IIB)
Application temperature1) –45 °C up to +55 °C (IIC)
–60 °C up to +55 °C (IIB)
Rated voltage 500 V AC
Rated current 16 A
Rated current with gold contact points 0.4 A
Rated making-/rated breaking capacity AC-15: Ue 250 V / Ie 6 A
accd. EN 60947-5-1 Ue 500 V / Ie 4 A
DC-13: Ue 24 V / Ie 6 A
Ue 220 V / Ie 1 A
Degree of protection accd. to EN 60529 IP66 (installed condition)
Type of mounting DIN rail mounting
Enclosure colour grey
Gasket material Neoprene (standard), Fluoric Silicone or Viton on request
2-pole version
Connecting terminals 2 x 2.5 mm2
Dimensions (L x W x H) 59 x 31 x 45 mm
Weight 0.15 kg
4-pole version
Connecting terminals 4 x 2.5 mm2
Dimensions (L x W x H) 59 x 73 x 45 mm
Weight 0.35 kg
1)
The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account.
2)
The 4-pole pushbutton needs two mounting areas.
The actuator will be in the middle of the two mounting areas.
The pushbutton „Emergency Stop“ will be equipped with a black plate in the centre of the pushbutton actuator.

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 23

Built-in components - Mushroom-head Pushbutton
Ordering code for component (Code 2)

Code Component Code

A Mushroom-head pushbutton SGT

Mushroom-head pushbutton (emergency stop) SGTE

CodeCircuit Contacts Code

silver contact points gold contact points
C 2 NC 11 21 13 16

12 22

2 NO 13 23 14 17

14 24

1 NO + 1 NC 13 21 15 18

14 22

4 NC 12 22 32 42 20 25

1121 31 41

1 NC + 3 NO 12 24 34 44 21 26

1123 33 43

2 NC + 2 NO 12 22 34 44 22 27

1121 33 43

3 NC + 1 NO 12 22 32 44 23 28

1121 31 43

4 NO 14 24 34 44 24 29

1323 33 43

24 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Built-in components - Mushroom-head Pushbutton
Ordering code for component (Code 2)

Code Label Inscription Code Inscription Code

D emergency stop (German - Englisch)1) 1 0 002
emergency stop (German - French)1) 4 II 004
0, I, START, STOP 01 STOP 006
0 02 emergency stop 008
I 03 SCHNELL 010
II 04 _ 012
05 MARCHE 015
STOP 06 AB 017
START 07 Neutral green 019
LANGSAM 09 UP 024
SCHNELL 10 ZU 026
_ 12 OFF 028
ARRET 14 - 031
MARCHE 15 Neutral yellow 034
0, I, Arret, Marche 20 AUS 037
UP 24 HAND 050
DOWN 25 HEBEN 052
ZU 26 RECHTS 054
ON 27 SLOW 056
OFF 28 OPEN 058
+ 30
- 31

Code Mushroom head inscription Colour Code

E red 1
yellow2) 2
black2) 3
pushbutton
Code Function released engaged unlocking Code
F not lockable not lockable n/a (pushbutton function) 12)
not lockable lockable hand released 2
not lockable lockable key released 3
1) only SGTE
2) only SGT

Ordering code for component (Code 2)

Content Ordering code
A C D E F
EMERGENCY STOP mushroom-head pushbutton red, with silver contact points
Version with inscription D/E, hand released
2 NC SGTE 0 13 1 1 2
2 NO SGTE 0 14 1 1 2
1 NO + 1 NC SGTE 0 15 1 1 2
2 NO + 2 NC SGTE 0 22 1 1 2
4 NC SGTE 0 20 1 1 2
4 NO SGTE 0 24 1 1 2
3 NO + 1 NC SGTE 0 21 1 1 2
1 NO + 3 NC SGTE 0 23 1 1 2
Mushroom-head pushbutton with silver contact points, without locking, mushroom head, black
Version with standard label (0, I, START, STOP)
2 NC SGT 0 13 01 3 1
2 NO SGT 0 14 01 3 1
1 NO + 1 NC SGT 0 15 01 3 1
2 NO + 2 NC SGT 0 22 01 3 1
4 NC SGT 0 20 01 3 1
4 NO SGT 0 24 01 3 1
3 NO + 1 NC SGT 0 21 01 3 1
1 NO + 3 NC SGT 0 23 01 3 1

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 25

Built-in components - Mini-control Switch

SCT 1 x 2-pole SCT 1 x 4-pole

Technical data
Ex-Mini-control switch SCT
Marking accd. to 2014/34/EU II 2 G Ex de IIC/IIB Gb / I M2 Ex de I Mb
EC-Type Examination Certificate IBExU 14 ATEX 1030 U
IECEx Certificate of Conformity IECEx IBE 14.0005U
Marking accd. to IECEx Ex de IIC Gb
Ex de IIB Gb
Ex de I Mb
Operating temperature range –45 °C up to +80 °C (IIC)
–60 °C up to +80 °C (IIB)
Application temperature1) –45 °C up to +55 °C (IIC)
–60 °C up to +55 °C (IIB)
Rated voltage 500 V AC
Rated current 16 A
Rated current with gold contact points 0.4 A
Rated making-/rated breaking capacity AC-15: Ue 250 V / Ie 6 A
accd. EN 60947-5-1 Ue 500 V / Ie 4 A
DC-13: Ue 24 V / Ie 6 A
Ue 220 V / Ie 1 A
Degree of protection accd. to EN 60529 IP66 (installed condition)
Type of mounting DIN rail mounting
Enclosure colour grey
2-pole version
Connecting terminals 2 x 2.5 mm2
Dimensions in mm (L x W x H) 59 x 31 x 45
Weight 0.15 kg
4-pole version1)
Connecting terminals 4 x 2.5 mm2
Dimensions (L x W x H) 59 x 73 x 45 mm
Weight 0.35 kg
1)
The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account.
2)
The 4-pole pushbutton needs two mounting areas.
The actuator will be in the middle of the two mounting areas.

26 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Built-in components - Mini-control Switch
Ordering code for component (Code 2) Code A - C - D - E

Code Component Ordering code

A Mini Control switch SCT

Code Switching system Version Code

C 4 spring – engaging – spring 4

45O
45 O
v
5 engaging – engaging – engaging 5

45O 45O

6 engaging – engaging 6

90
O

7 spring – engaging – engaging 7

45O 45O

8 engaging – engaging – spring 8

45 O
45 O

9 engaging – spring 9

90O

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 27

Built-in components - Mini-control Switch
Ordering code for component (Code 2) Code A - C - D - E
Code Circuit Contacts Code
silver contact points gold contact points
D 13 21 21/13 01 11
45
135
14 22 45 135 22 14

13 21 02 12
13 21
45
135
1422 45 135 14 22

13 23 03 13
13 23
45
135
1424 45 135 14 24

13 23 13/23 04 14
45
90
135
14 24 45 90 135 14 24

13 23 13 23 05 15
45
90
135
14 24 45 90 135 14 24

13 21 13 21 07 17
45
90
135
14 22 45 90 135 14 22

12223444 12 22 34 44 22 32
45°
135°
11213343 45° 135° 11 21 33 43
v

14 24
23 33
14243444 34 44
45°
135°
13233343 v 45° 135° 13 23 33 43

14243444 12 22 32 42 21 31
45°
135°
13233343 45° 135° 11 21 31 41

26 36
14243444 12 24 34 44
45°
135°
13233343 45° 135° 11 23 33 43

13233343 13 23 33 43 25 35
45°
90°
135°
14 243444 45°90° 135° 14 24 34 43

13 213341 12 22 34 44 27 37
45°
90°
135°
14223442 45°90° 135° 11 21 33 43

13 233343 13/23 33/43 24 34

45°
90°
135° 45°90° 135°
14243444 14 24 34 44

28 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Built-in components - Mini-control Switch
Ordering code for component (Code 2)

Code Inscription Code Inscription Code

E 0 I 01 0 I II 18
I II 02 AUS AUTO EIN 19
STOP START 03 AUS HAND AUTO 20
HAND AUTO 04 ÖRTLICH AUS FERN 21
SENKEN HEBEN 05 START NORMAL STOP 22
REMOTE LOCAL 06 OFF 0 ON 23
I 0 II 07 HAND OFF AUTO 24
AUS BETRIEB EIN 08 0 IN START 25
AUS 0 EIN 09 MAN AUTO 26
AUF 0 AB 10 START STOP 27
Entriegelt 0 Verriegelt 11 HEBEN SENKEN 28
OUT OF HAND 12 OFF ON 29
LOCAL REMOTE AUTO 13 AUS EIN 30

Other lables on request

Example for ordering code (Code 2)

Circuit Switching system Contacts Ordering code
Code A C D E
Control switch with silver contact points
Switch can be locked in all positions
I II 6 01 SCT 6 01 or 21 02
0I 6 03 SCT 6 03 or 23 01
I II 6 02 SCT 6 02 or 22 02
I 0 II 4 04 SCT 4 04 or 24 07
I 0 II 5 05 SCT 5 05 or 26 07
0I 7 07 SCT 7 07 or 27 01

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 29

Built-in components - Potentiometer

Potentiometer

Technical data
Ex-potentiometer POT
Marking accd. to 2014/34/EU II 2 G Ex de IIC/IIB Gb / I M2 Ex de I Mb
EC-Type Examination Certificate IBExU 14 ATEX 1030 U
IECEx Certificate of Conformity IECEx IBE 14.0005U
Marking accd. to IECEx Ex de IIC Gb
Ex de IIB Gb
Ex de I Mb
Operating temperature range –45 °C up to +80 °C (IIC)
–60 °C up to +80 °C (IIB)
Application temperature1) –45 °C up to +55 °C (IIC)
–60 °C up to +55 °C (IIB)
Rated voltage up to 250 V
Power consumption (VA) max. 1 W
Resistance range 100 – 10000 Ohm
Tolerance ± 20 %
Connecting terminals 2 x 2.5 mm2
Degree of protection accd. to EN 60529 IP66 (installed condition)
Dimensions (L x W x H) approx. 59 x 31 x 45 mm
Weight 0.15 kg
Type of mounting DIN rail mounting
Enclosure colour grey
Angle of rotation 270°
Scale 0 - 100 %
1)
The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into
account.

Ordering code for component (Code 2) - code A - C

Code Component Code

A Potentiometer POT

Code Resistance Code

C 0 - 100 Ohm 01
0 - 220 Ohm 02
0 - 470 Ohm 03
0 - 1000 Ohm 04
0 - 2200 Ohm 07
0 - 4700 Ohm 05
0 - 10000 Ohm 06

Example for ordering code (Code 2)

Content Code
Potentiometer 1 W 25 % tolerance
0 - 100 Ohm POT 01
0 - 470 Ohm POT 03
0 - 4700 Ohm POT 05

30 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Built-in components - Signal Lamp

Signal lamp

Technical data
Ex-signal lamp SIL
Marking accd. to 2014/34/EU II 2 G Ex d e IIC/IIB Gb / II 2 G Ex d ia IIC/IIB Gb
EC-Type Examination Certificate IBExU 12 ATEX 1047 U
IECEx Certificate of Conformity IECEx IBE 13.0031U
Marking accd. to IECEx Ex de IIC/IIB Gb
Ex d ia IIC/IIB Gb
Operating temperature range –45 °C up to +68 °C (IIC)
–60 °C up to +68 °C (IIB)
Application temperature 1) –45 °C up to +60 °C (IIC)
–60 °C up to +60 °C (IIB)
Rated voltage (Ex ed IIC) 20 V up to 254 V AC/DC
(Ex d ia IIC) 10 V up to 30 V DC
(Ex ed IIC) 12 V up to 24 V AC/DC
Rated current 20 V to 254 V approx. 4 - 15 mA
10 V up to 30 V (Ex d ia IIC) max. 25 mA
12 V up to 24 V max. 24 mA
Max. values for Ex ia Ui = 30 V DC, Ii = 100 mA, Pi = 750 mW
Connecting terminals 2 x 2.5 mm2
Degree of protection accd. to EN 60529 IP66
Dimensions (L x W x H) approx. 59 x 31 x 45 mm
Weight 0.15 kg
Type of mounting DIN rail mounting
Enclosure colour grey
1)
The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account.

Ordering code for component (Code 2) - code A - C - D

Code Component Code

A Signal lamp SIL

Code Colour of the lens Code

C white 1
yellow 2
red 3
blUe 4
green 5

Code Voltage Code

D 20 V - 254 V AC/DC 10
10 V - 30 V DC (Ex-i)1) 34
12 V - 24 V AC/DC 11
1)
Supply by valve-driver components, e.g., with data: Uo = 20 V - 18 V DC with Ri = 200 Ω- 500 Ω or Uo = 10 V - 18 V DC with Ri = 100 Ω - 200 Ω
No effective Ci and Li valUes.

Example for ordering code (Code 2)

Content Ordering code
A C D
Signal lamp SIL (examples)
Universal voltage 20 V - 250 V AC/DC white SIL 1 10
For intrinsically safe circuits 18 V up to 30 V DC blUe SIL 4 34
Low voltage 12 V up to 24 V AC/DC red SIL 3 11

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 31

Built-in components - Measuring Instrument AM 45/AM 72

AM 45 AM 72

Technical data
Ex-measuring instrument AM 45/AM 72 Moving iron Moving coil
Marking accd. to 2014/34/EU II 2 G Ex e II / D II 2 G Ex e mb II II 2 G Ex ib IIC
I M 2 Ex e I I M 2 Ex ib I
EC-Type Examination Certificate PTB 99 ATEX 2032 U
Application temperature –20 °C up to +40 °C
–55 °C up to +55 °C (option)
Rated voltage up to 420 V (AM 45)
up to 750 V (AM 72)
Power consumption (VA) max. 0.31 A
Overload range 10 fold - 25 sec. 10 fold - 5 sec.
25 fold - 4 sec.
50 fold - 1 sec.
indicated 1 : 1.5, optional 1:6, 1:10
Measuring range max. 0 - 25 A direct / n / 1A 0/4 - 24 mA
Inductance Li < 0.1 mH
Capacitance Ci < 0.1 nF
Winding specification of moving coil 26.5 windings
Internal resistance 2.5 Ω ±30 %
Open circuit voltage max. Ui 30 V
Connecting terminals max. li 150 mA
Accuracy Class 2.5 Class 1.5
Movement Moving iron Moving coil
Connecting terminals 2 x 1.5 - 4 mm2
Degree of protection accd. to EN 60529 IP66 (installed condition)
Display size 40 x 40 mm (AM 45)
68 x 68 mm (AM 72)
Weight 0.35 kg
Type of mounting DIN rail mounting
Enclosure material Polycarbonate

32 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Built-in components - Measuring Instrument AM 45/AM 72
Ordering code for component (Code 2) Code A - C - D

Code Component Code

A Measuring instrument AM 45 AM45

Measuring instrument AM 72 AM72

Code Movement Code

C Direct connection 1
CT connection n/1 A 2
CT connection n/5 A 3
Power connection 0 - 20/24 mA (Scale 0-100% / 120%) 1) 5
Power connection 4 - 20/24 mA (Scale 0-100% / 120%) 1) 6
Moving-coil connection 0 - 20/24 mA (Scale 0-100% / 120%) 1) 3) 7
Moving-coil connection 4 - 20/24 mA (Scale 0-100% / 120%) 1) 3) 8

Code Measuring range Code Measuring range Code

D 0-1 02 0 - 75 / 112.5 A 13
0 - 2.5 / 3.75 A 2) 03 0 - 100 / 150 A 14
0 - 5 / 7.5 A 2) 04 0 - 150 / 225 A 15
0 - 10 / 15 A 2) 05 0 - 200 / 300 A 16
0 - 15 / 22.5 A 06 0 - 250 / 375 A 17
0 - 20 / 30 A 2) 08 0 - 300 / 450 A 18
0 - 30 / 45 A 09 0 - 400 / 600 A 19
0 - 40 / 60 A 10 0 - 500 / 750 A 20
0 - 50 / 75 A 11 0 - 600 / 900 A 21
0 - 60 / 90 A 12 0 – 100% / 150% 33
1)
Movements 0 - 20 mA / 4 - 20 mA and with moving-coil connection are only available with scale 0 - 100 %/120 %v
2)
Version for direct connection or with CT connection n/1 A possible.
3)
Moving coil only for Ex-i or Ex-d flameproof applications - Other interchangeable scales available on request.

Example for ordering code (Code 2)

Movement Measuring range Ordering code
Measuring instrument AM 45 A C D
Version with direct connection
Direct (moving iron) 0 - 1 / 1.5 A AM45 1 02
Direct (moving iron) 0 - 10 / 15 A AM45 1 05
0 - 20 / 24 mA (moving coil) 0-100% / 120% AM45 5 33
4 - 20 / 24 mA (moving coil) 0-100% / 120% AM45 6 33

Moving iron measuring instrument AM 72

Version with CT connection n/1A
Converter n / 1A 0 - 100% / 150% AM72 2 33

Moving-coil measuring instrument AM 45 (Ex-i application only)

Version with direct connection
0 - 20 / 24 mA 0-100% / 120% AM45 7 33
4 - 20 / 24 mA 0-100% / 120% AM45 8 33

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 33

Built-in components - Control Switch Ex 23

Ex 23

Technical data
Ex-Built-in components for individual control stations
Control switch Ex 23 Ex 23
Marking accd. to 2014/34/EU I M2 Ex d e I Mb
II 2G Ex d e IIB/IIC Gb
II 2G Ex d ia/ib IIB/IIC Gb
IECEx Certificate of Conformity IECEx IBE 13.0108 U
Marking accd. to IECEx Ex d e I Mb
Ex d e IIB/IIC Gb
Ex d ia/ib IIB/IIC Gb
EC-Type Examination Certificate BVS 13 ATEX E 107U
Operating temperature range –45 °C up to +80 °C (IIC)
–60 °C up to +80 °C (IIB)
Application temperature 1) –45 °C up to +55 °C (IIC)
–60 °C up to +55 °C (IIB)
Rated voltage up to 500 V
Rated current 10 A
Rated current with gold contact points 0.4 A
Rated making-/rated breaking capacity AC-15: Ue 230 V / Ie 6 A
accd. EN 60947-5-1 Ue 500 V / Ie 4 A
DC-13: Ue 24 V / Ie 6 A
Ue 230 V / Ie 0.5 A
Connecting terminals 2 x 0.5 - 2.5 mm2
Weight 1 level: approx. 0.2 kg
2 level: approx. 0.35 kg
3 level: –

Type of mounting DIN rail mounting

Enclosure colour grey
1)
The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account.
2)
min. cross section of used cable ≥ 12 A: 2.5 mm2

34 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

Built-in components - Control Switch Ex 23
Ordering code for component (Code 2) Code A - C - D - E - F

Code Component Code

A Ex 23 Ex 23

Code Switching system Code

C spring – engaging – spring 4
45O 45O

engaging – engaging – engaging 5

45O 45O

engaging – engaging 6
90O

spring – engaging – engaging 7

45O 45O

engaging – engaging – spring 8

45O 45O

D Contacts Silver contact points Code Contacts Silver contact points Code
1/3 060 1 3 5 1 3 5 034
1 3 I II 0 I
45 45
135 90
2 4 135
45 135 2 4 2 4 6 45 90 135 2 4 6

1 3 062 1 3 5 1 3 5 037
1 3 I II 0 I
45 45
135 90
2 4 45 135 2 4 135
2 4 6 45 90 135 2 4 6

1 3 065 1 3 5 1 3 5 049
1 3 0 I 0 I
45 45
135 90
2 4 135
45 135 2 4 2 4 6 45 90 135 2 4 6

1 3
I 0 II 1/3 061 1 3 5 1 3 5 023
45 45 I II III
90 90
135 135
2 4 45 90 135 2 4 45 90 135 2 4 6
2 4 6

1 3 1 3 063 1 3 5 019
I 0 II 1 3 5 0 I
45 45
90 135
135 2 4 6 45 135 2 4 6
2 4 45 90 135 2 4

1 3 1 3 067 1 3 5 7 I II 1/3 5/7 033

45 0 I
45
90 135
135 2 4 68 45 135 2 4 6 8
2 4 45 90 135 2 4

1 011 1 3 5 7
I 0 II 1/3 5/7 024
1 0 I 45
45 90
135 135
2 45 135 2 2 4 68 45 90 135 2 4 6 8

Versions with gold contact points are available on request.

Versions with compulsory NO are possible.

CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS 35

 Built-in components - Control Switch Ex 23
Ordering code for component (Code 2) Code A - C - D - E - F
Code Inscription (labels) Code Inscription (labels) Code
E 0 I 01 0 I II 18
I II 02 AUS AUTO EIN 19
STOP START 03 AUS HAND AUTO 20
HAND AUTO 04 ÖRTLICH AUS FERN 21
SENKEN HEBEN 05 START NORMAL STOP 22
REMOTE LOCAL 06 OFF 0 ON 23
I 0 II 07 HAND OFF AUTO 24
AUS BETRIEB EIN 08 0 IN START 25
AUS 0 EIN 09 MAN AUTO 26
AUF 0 AB 10 START STOP 27
Entriegelt 0 Verriegelt 11 HEBEN SENKEN 28
OUT OF HAND 12 OFF ON 29
LOCAL REMOTE AUTO 13 AUS EIN 30
STOP 0 START 14 HAND AUTO 31
HAND 0 AUTO 15 ON OFF 32
AUF AUS ZU 16 I II III 33

Code Padlocking facility Code

F none 0

centre 1

right 2

left 3

Example for ordering code (Code 2)

Content Component Contacts Label Padlocking facility Ordering code
A Switching system B C Code D Code E A B C D E
Ex 23 1 3 5
0 I
1 3 5 060 060 I - II 02 none 0 Ex 23 6 060 02 0
90O 6 45
90
135
2 4 6 45 90 135 2 4 6

Ex 23 1 3 I II
1/3 034 034 I - 0 - II 07 centre 1 Ex 23 5 034 07 1
45O 45O 5 45
135
2 4 45 135 2 4

Other combination available on request

36 CROUSE-HINDS SERIES AGP17 EXPLOSION-PROTECTED PANELBOARDS

U.S. (global headquarters): Canada Middle East Korea
Eaton's Crouse-Hinds Division Toll Free: 800-265-0502 971 4 8066100 82 2 6380 4032
1201 Wolf Street FAX: (800) 263-9504 FAX: 971 4 8894813 82-2-6380-4070
Syracuse, NY 13208 FAX Orders only: (866) 653-0645 [email protected] [email protected]
(866) 764-5454
FAX: (315) 477-5179
FAX Orders Only:
(866) 653-0640
[email protected] Mexico/Latin America/Caribbean Singapore Australia
52-555-804-4000 65-6645-9888 1300-332-866
FAX: 52-555-804-4020 FAX: 65-6297-4819 FAX: 61-2-9693-5127
[email protected] [email protected] [email protected]
For more information:
If further assistance is
required, please contact
an authorized Eaton
Europe (Germany) China India
49 (0) 6271 806-500 86-21-2899-3600 91-124-4683888
or Customer Service 49 (0) 6271 806-476 FAX: 86-21-2899-4055 FAX: 91-124-4683899
Department.
[email protected] [email protected] [email protected]

Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com

© 2022 Eaton Eaton is a registered trademark.

All Rights Reserved
Publication No. AGP172022EN All other trademarks are property
September 2022 of their respective owners.