Scribd
Upload
32 views2 pages

Fabrication Rates

This document contains a list of items, quantities in tons or square meters, and fabrication rates for various job numbers. It includes primary and secondary steel, hot rolled sections like rods and angles, and other items like sheeting, bolts, and decking. The job numbers range from J3989 to J4010 and include quantities of materials from less than a ton to hundreds of tons. Fabrication rates vary significantly depending on the material type.

Uploaded by

m13naserraja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
32 views2 pages

Fabrication Rates

This document contains a list of items, quantities in tons or square meters, and fabrication rates for various job numbers. It includes primary and secondary steel, hot rolled sections like rods and angles, and other items like sheeting, bolts, and decking. The job numbers range from J3989 to J4010 and include quantities of materials from less than a ton to hundreds of tons. Fabrication rates vary significantly depending on the material type.

Uploaded by

m13naserraja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Job # Item UOM Weight Fab rate

J3989 Primary Steel (PEB) ton 21.16 45.00


J3989 Secondary Steel (Pre-galvanized) - Z250 & Z200 ton 11.69 25.00
J3989 Hot Rolled(RODS) ton 0.81 45.00
J3989 Hot Rolled(ANGLES) ton 0.55 45.00
J3989 Hot Rolled(BEAMS / COLUMNS) - -
J3989 Hot Rolled(CHANNELS) - -
J3989 Hot Rolled(TABULAR) ton 2.23 45.00
J3989 Anchor Bolts (HDG) ton 0.13 1.00
J3989 Connection Bolts ( HDG ) ton 0.55 1.00
J3993 Primary Steel (PEB) ton 18.79 36.25
J3993 Hot Rolled (Rods) ton 0.66 35.00
J3993 Hot Rolled (Angles) ton 0.82 35.00
J3993 Anchor Bolts (HDG) ton 0.59 1.00
J3993 Connection Bolts (HDG) ton 0.52 1.00
J3993 Secondary Steel (Pre-galvanized) ton 6.92 22.00
J3993 26GA Roof Single Skin Sheeting ton 3.12 4.00
J3993 26GA Wall Single Skin Sheeting ton 7.71 4.00
J3993 Gutter ton 0.22 100.00
J3993 Downspout ton 0.63 100.00
J3993 Trims & Flashings ton 1.23 100.00
J3995 Primary Steel (PEB) ton 135.78 53.35
J3995 Tubular Sections (RHS/CHS) ton 59.43 57.00
J3995 Hot Rolled Section ton 5.67 49.00
J3995 Connection Bolts ton 5.06 1.00
J3995 Anchor Bolts ton 3.48 1.00
J3995 Secondary Steel (Pre-galvanized) ton 4.35 22.00
J3995 Chequered plates m2 39.60 2.10
J3996 Primary Steel (PEB) ton 97.21 35.86
J3996 Hot Rolled(RODS) ton 3.69 50.00
J3996 Hot Rolled(ANGLES) ton 5.21 50.00
J3996 Hot Rolled(BEAMS / COLUMNS) ton 9.88 35.00
J3996 Tubes ton 0.34 35.00
J3996 Anchor Bolts (HDG) ton 0.59 1.00
J3996 Connection Bolts ton 1.19 1.00
J3996 Mezzanine Decking (24ga) ton 4.44 5.00
J3996 cold formed ton 34.66 22.00
J3997 Primary Steel (PEB) ton 15.80 45.00
J3997 Secondary Steel (Pre-galvanized) ton 1.62 25.00
J3997 Hot Rolled(RODS) ton 0.20 50.00
J3997 Hot Rolled(ANGLES) ton 1.58 50.00
J3997 Anchor Bolts (HDG) ton 0.11 1.00
J3997 Connection Bolts ( HDG ) ton 0.17 1.00
J4004 Primary Steel (PEB) ton 325.72 40.00
J4004 RODS ton 2.45 40.00
J4004 ANGLES ton 3.88 40.00
J4004 Anchor Bolts ton 2.20 1.00
J4004 Connection Bolts ton 4.66 1.00
J4004 Flashing / Trims ton 1.52 100.00
J4004 Decking 24GA ton 44.10 5.00
J4004 Hot Rolled(beams) ton 15.00 35.46
J4004 Hot Rolled(Tubes) ton 11.00 35.46
J4006 Primary Steel (PEB) ton 234.15 32.00
J4006 Hot Rolled(RODS) ton 0.59 35.00
J4006 Hot Rolled(ANGLES) ton 41.43 40.88
J4006 Hot Rolled(BEAMS / COLUMNS) ton 16.37 43.38
J4006 Hot Rolled(TABULAR) ton 91.16 48.09
J4006 Anchor Bolts ton 6.74 1.00
J4006 Connection Bolts ton 19.25 1.00
J4006 Secondary Steel (Pre-galvanized) ton 254.03 22.00
J4006 ROOF Sheeting Alu Zinc (AZ 150), 0.50mm, RAL 9016- ton 77.10 4.00
Polyester Coated (5+20μm) on external surface &
J4006 Mezzanine Decking ( 24GA ) ton 2.10 6.00
J4010 Primary Steel (PEB) ton 57.81 40.42
J4010 Secondary Steel (Pre-galvanized) ton 6.11 21.27
J4010 Hot Rolled(ANGLES) ton 3.09 37.23
J4010 Hot Rolled(TABULAR) (SHS150x5 = 0.78Mt + SHS150x5 = ton 21.74 42.55
J4010 Hot Rolled(Pipe) (CHS168.3X6.3=3MT+CHS193.7X6.3 = 1. ton 4.10 42.55
J4010 Anchor Bolts (HDG) / Excluded suplly and erection (castedton -
J4010 Connection Bolts (HDG) ton 1.98 1.06

You might also like