GeoSurveyor Mobile Bluetooth Connection to S320

Part Number 874-0302-000 Released: December 03, 2013

Overview
This document describes how to establish and retain a Bluetooth connection between
GeoSurveyor Mobile, (SurvCE) software on the GM200 data collector and the S320 GNSS
receiver. These instructions are also valid for the older XF2 and XF1 data collectors running the
SurvCE software.

Procedure

Screenshot or Graphic Step

1. To create a Bluetooth connection

between GeoSurveyor Mobile SW and
the S320 GNSS Base receiver, turn on
the S320 GNSS receiver, turn on the
GM200 data collector,(XF2), start the
GeoSurveyor Mobile, (SurvCE) SW.
2. The S320 GNSS receiver has two
internal Class 2 Bluetooth modules.
3. The S320 GNSS receiver and the
GM200 data collector must be within +/-
30 feet of each other to establish and
maintain a Bluetooth connection.

4. Hemisphere GNSS GeoSurveyor Mobile

start up-splash-logo screen.

S320 Bluetooth Connect to GeoSurveyor Mobile Page 1 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

5. File > 1 Job menu,

6. Select/Tap Continue Last Job

7. Loading Job…

8. Job Settings > System menu,

9. Current Distance units are displayed,
10. Current Projection / Coordinate System is
displayed.

11. Job Settings > System menu,

12. If necessary, select/tap
[Edit Projection List] menu bar, select
appropriate Coordinate System for the
current Job.

S320 Bluetooth Connect to GeoSurveyor Mobile Page 2 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

13. Job Settings > New Job,

14. Job Settings > Format menu,

15. Select Coordinate Display Order: and
other display settings as needed,

16. Job Settings > Options menu,

17. Select Options as needed,

18. Job Settings > Stake,

19. Select options as needed,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 3 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

20. Job Settings > Loading selected options,

21. Equip > 2 GPS Base menu,

22. GPS Base | Current menu,

23. Manufacturer: Hemisphere GPS
24. Model: Eclipse II S320

25. GPS Base | Comms menu,

26. Type: Bluetooth
27. BT Type: Windows Mobile
28. Device: [ ]
29. Select/tap the Tool Menu icon button,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 4 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

30. Bluetooth Devices menu,

Select Base BT Device,
31. Select/tap [ Find Device ] button-bar,

32. Looking for BT devices…

33. Make sure your S320 GNSS Base
receiver is powered ON and within range,
+/- 30 feet.

34. Looking for BT devices

35. Name: HGPS S320 186xxxx
36. Note: when you initiate the Bluetooth
search, the actual Serial Number of your
S320 GNSS receiver found will be
displayed here.

37. Bluetooth Devices

Please select from these available
devices,
38. Several Bluetooth devices were located,
select the actual serial number of your
HGPS S320 186xxxx

S320 Bluetooth Connect to GeoSurveyor Mobile Page 5 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

39. Bluetooth Devices menu,

Please select from these available
devices,
40. Select HGPS S320 186xxxx,
41. Select/tap the green check mark to
continue,

42. Multiple Bluetooth ports found,

Please select which Bluetooth port to
use,
43. Select the option, Any Available Port
44. Select/tap the green check mark to
continue

45. Multiple Bluetooth ports found menu,

46. Select Any Available Port
47. Select/tap the green check mark to
continue,

48. Bluetooth Devices | Select Base BT

Device menu,
49. Select HGPS S320 186xxxx
50. Select/tap [ Set Device Pin ] button-bar,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 6 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

51. Configure BT Device PIN,

52. Using the data collector stylus, tap into
the Enter BT Device PIN: template,

53. Enter Data menu,

54. Using the data collector stylus, tap into
the dialog template, the virtual keyboard
will pop open, manually enter 4-zeros,
0000,

55. Configure BT Device PIN:

56. Enter BT Device’s PIN: 0000
57. Select/tap the green check mark to
continue,

58. Bluetooth Devices menu,

59. Select Base BT Device menu,
60. Receiver Name: HGPS S320 186xxxx
61. Select/tap [ Set Device Name ] button-
bar,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 7 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

62. Name: menu

63. Name: HGPS S320 186xxxx,

64. Enter data menu,

65. Using the data collector stylus, select/tap
into the dialog template, the virtual
keyboard will pop open, HGPS S320
186xxxx is displayed,

66. Name:
67. Name template > manually rename the
BT Device Name to HGPS 186xxxx BAS
68. Add the Suffix BAS
69. Renaming the Base BT Device adding
BAS suffix, will help remind the user
which S320 Serial number is being
deployed as the RTK Base receiver.

70. Bluetooth Devices

71. Select Base BT Device menu,
72. Select the Receiver Name: S320
186xxxx BAS
73. Select/Tap the Bluetooth icon,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 8 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

74. Bluetooth Devices menu,

75. Bonding with Bluetooth…

76. GPS Base > Receiver menu,

77. Select the HEMS320 Antenna model,
78. Measure and enter the S320 RTK Base
Antenna height, select the appropriate
Antenna measurement, ( ) Vertical or ( •)
Slant
79. If using conventional survey tripod &
Tribrach > Select (•) Slant
80. DGPS Type: None

81. Select/tap the Antenna details icon to

reveal the selected GNSS antenna
properties,
82. The Radius, SHMP, (Slant Height
Measurement Point), L1 Offset and L2
Offset values are displayed,
83. Select/tap the green check mark to
continue,

84. GPS Base menu > Receiver menu,

85. Select the HEMS320 antenna model
86. Measure and enter the S320 Antenna
Height,
87. DGPS Type: None

S320 Bluetooth Connect to GeoSurveyor Mobile Page 9 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

88. GPS Base > RTK menu,

89. Device: Internal nL400 Microhard
90. Message Type: RTCM v3.0
91. Select/tap the green check mark to
continue,

92. Configuring base…

93. Configuring base,

Selecting Modem/Radio…

94. Base Configuration

95. From New Position menu,
This completes the required steps to
create the Bluetooth connection between
the data collector and the S320 Base,
Select/tap the red X to exit.
The next step, create the Bluetooth
connection between the data collector
and the S320 RTK Rover.

S320 Bluetooth Connect to GeoSurveyor Mobile Page 10 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

96. Equip > 3 GPS Rover,

97. GPS Rover > Current menu,

98. Manufacturer: Hemisphere GPS
99. Model: Eclipse II S320,

100. GPS Rover > Comms

101. Type: Bluetooth
102. BT Type: Windows Mobile
103. Select/tap the Tools menu icon,

104. Bluetooth Devices

Select Rover BT Device,
105. Select/tap [Find Device ]
button-bar,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 11 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

106. Bluetooth Devices

Looking for BT devices…
Looking for Bluetooth devices.

107. Looking for Bluetooth devices…

108. Name: HGPS S320 186xxxx
found,

109. Bluetooth Devices

Please select from these available devices

110. Bluetooth Devices

Please select from these available devices
111. Select your HGPS S320 186xxxx
serial number,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 12 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

112. Bluetooth Devices

Select Rover BT Device
HGPS S320 186xxxx
113. Select/tap [Set Device Pin ]
Button-bar,

114. Configure BT Device’s PIN

115. Using the data collector stylus
Tap into the blank template [ ],

116. Enter data

117. The virtual keyboard will pop
Open, manually enter 4-zeros, 0000
Tap the green check mark to continue,

118. Configure BT Device PIN

Enter BT Device’s Pin: 0000

S320 Bluetooth Connect to GeoSurveyor Mobile Page 13 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

119. Bluetooth Devices

Select Rover BT Device
HGPS S320 186xxxx

120. Name:
Name:
[ HGPS S320 186xxxx ]
Using the stylus, tap into the template,

121. The virtual keyboard will pop

Open and display HGPS S320 186xxxx

122. Enter data

Tap into the template, manually enter the
name S320 186xxxx ROV
123. Tap the green check mark to
continue,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 14 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

124. Name:
125. Name:
[ S320 186xxxx ROV ]
Renaming the Rover BT Device adding ROV
suffix, will help remind the user which S320 Serial
number is being deployed as the RTK Rover
receiver.

126. Bluetooth Devices

127. Select Rover BT Device
128. S320 186xxxx ROV
129. Tap/select the Bond Bluetooth
Icon,

130. Bluetooth Devices

131. Bonding with Bluetooth….

132. GPS Rover | Comms menu

133. Type: Bluetooth
BT Type: Windows Mobile
Device: S320 186xxx ROV

S320 Bluetooth Connect to GeoSurveyor Mobile Page 15 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

134. GPS Rover | Receiver

135. Connecting to Instrument

136. GPS Rover | Receiver menu

137. Select the HEMS320 Antenna
Model
138. Measure and enter the S320
RTK Rover Antenna height, select the
appropriate Antenna measurement, ( •)
Vertical or ( ) Slant
If using 2-Meter RTK Pole, select (• )
Vertical
139. DGPS Type: None

140. Enter data

141. Using the stylus, tap into the
Antenna Height template, the virtual keyboard will
pop open, manually enter 2.000, tap the green
check to continue,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 16 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

142. GPS Rover | Receiver menu,

143. GPS Rover | RTK menu,

144. Device: Select Internal nL400
Microhard,
145. Tap the green check mark to
Continue,
[√] Use Any Base ID

146. Equip > Configuring rover

Selecting Modem/Radio,

147. Equip > Configuring rover

Configuring rover

S320 Bluetooth Connect to GeoSurveyor Mobile Page 17 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

148. Equip > Configuring rover

Save complete.
This completes the required steps to
create the Bluetooth connection between
the data collector and the S320 RTK
Rover.

149. The user is now ready to start the

RTK Rover survey, return to the
SurvCE main menu,
150. Survey > 1 Store Points menu,

151. The user can check the SurvCE

Version,
152. Equip > 0 About SurvCE

153. About SurvCE menu,

154. Select/Tap the Return arrow to
Return the SurvCE main menu,

S320 Bluetooth Connect to GeoSurveyor Mobile Page 18 of 19 PN 874-0302-000 Rel. December 03, 2013
 Screenshot or Graphic Step

155. Survey > 1 Store Points

Further Information
The Hemisphere GNSS Technical Support team in Scottsdale, AZ, USA has created these
Quick Reference Guides for your convenience. If you need first-level technical support, please
contact your regional Hemisphere GNSS - Distributor/Dealer. If you need second-level technical
support, you can contact Hemisphere GNSS Technical Support at
[email protected] to request additional technical support.
This document is provided for technical support purposes only. Refer to the product documentation for warranty,
license, and safety information associated with the product.

S320 Bluetooth Connect to GeoSurveyor Mobile Page 19 of 19 PN 874-0302-000 Rel. December 03, 2013