SKID STEER LOADERS

MULTI TERRAIN LOADERS

COMPACT TRACK LOADERS
3

CONTENTS Features:
SKID STEER LOADERS/ ● Cat® engines provide high horsepower, torque
MULTI TERRAIN LOADERS/ and S•O•S oil sampling ports standard.
COMPACT TRACK LOADERS ● Sealed and pressurized cab option for C Series
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1 models provides optimum operator comfort.
SSL Specifications . . . . . . . . . . . . . . . . . . . . . .3-2
● Ergonomically designed cab provides maxi-
SSL Performance Data . . . . . . . . . . . . . . . . . .3-5
mum operator comfort and visibility.
SSL Dimensions . . . . . . . . . . . . . . . . . . . . . .3-34
SSL Work Tool Compatibility . . . . . . . . . . . .3-37 ● Low-effort joystick controls, armrest and retract-
MTL Specifications . . . . . . . . . . . . . . . . . . . .3-40 able seat belt for easy operation.
MTL Performance Data . . . . . . . . . . . . . . . .3-42
MTL Dimensions . . . . . . . . . . . . . . . . . . . . . .3-57 ● Seat mounted controls are standard for C Series
MTL Work Tool Compatibility . . . . . . . . . . .3-59 models.
CTL Specifications . . . . . . . . . . . . . . . . . . . .3-62 ● Deep skid resistant steps and two tilt cylin-
CTL Performance Data . . . . . . . . . . . . . . . . .3-63 ders makes egress/ingress easy.
CTL Dimensions . . . . . . . . . . . . . . . . . . . . . .3-72
CTL Work Tool Compatibility . . . . . . . . . . . .3-73 ● Hand and foot throttle for continuous or vari-
able engine speed.
Work Tools:
● Anti-stall feature (B Series) and Electronic
Augers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-76
Torque Management (C Series) provide maxi-
Brushcutters . . . . . . . . . . . . . . . . . . . . . . . . .3-79
mum rimpull and hydraulic power while lugging
Cold Planers . . . . . . . . . . . . . . . . . . . . . . . . .3-81
the engine.
Landscape Tillers . . . . . . . . . . . . . . . . . . . . .3-84
Landscape Rakes . . . . . . . . . . . . . . . . . . . . . .3-86 ● High hydraulic horsepower gets work done
Mulchers . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-88 quickly.
Power Box Rakes . . . . . . . . . . . . . . . . . . . . . .3-90
Trenchers . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-92 ● Direct drive hystat pumps eliminate drive belts.
Vibratory Compactors . . . . . . . . . . . . . . . . . .3-95 ● Tilt-up cooling package provides access to
Brooms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-97 engine compartment.
Stump Grinders . . . . . . . . . . . . . . . . . . . . . .3-100
Angle Blades . . . . . . . . . . . . . . . . . . . . . . . .3-103 ● Long life coolant and extended hour service
Backhoes . . . . . . . . . . . . . . . . . . . . . . . . . . .3-104 intervals for low operating costs.
Material Handling Arm . . . . . . . . . . . . . . .3-105
● Deutsch connectors are color coded, numbered
Snow Blowers . . . . . . . . . . . . . . . . . . . . . . .3-106
and protected with nylon braiding.
Wheel Saws . . . . . . . . . . . . . . . . . . . . . . . . .3-107
● Electro-depositioned or “E” coat corrosion pro-
tection for long life.
● High flow XPS hydraulics are optional on all
C Series machines.
● High flow hydraulics optional on 226B2, 242B2
and 257B2.

Edition 40 3-1
Skid Steer Loaders Specifications

MODEL 216B2 226B2 232B2

Flywheel Power: Net 35 kW 48 hp 42 kW 56 hp 42 kW 56 hp
Flywheel Power: Gross 38 kW 51 hp 46 kW 62 hp 46 kW 62 hp
Engine Model C2.2 C2.2T C2.2T
Rated Engine RPM 3000 3000 3000
Bore 84 mm 3.3" 84 mm 3.3" 84 mm 3.3"
Stroke 100 mm 3.9" 100 mm 3.9" 100 mm 3.9"
Displacement 2.2 L 134 in3 2.2 L 134 in3 2.2 L 134 in3
No. Cylinders 4 4 4
One Speed Forward 0-12.7 km/h 0-7.9 mph 0-12.7 km/h 0-7.9 mph 0-11.1 km/h 0-6.9 mph
One Speed Reverse 0-12.7 km/h 0-7.9 mph 0-12.7 km/h 0-7.9 mph 0-11.1 km/h 0-6.9 mph
Hydraulic Cycle Time, Empty Bucket: Seconds Seconds Seconds
Raise 2.7 2.7 3.0
Dump 2.2 2.2 2.2
Lower (Empty, Float Down) 2.8 2.8 3.0
Total 7.7 7.7 8.2
Tread Width 1244 mm 4'1" 1244 mm 4'1" 1244 mm 4'1"
Width Over Tires 1525 mm 5'0" 1525 mm 5'0" 1525 mm 5'0"
Ground Clearance 195 mm 8.0" 195 mm 8.0" 145 mm 5.7"
Fuel Tank Capacity 58 L 15.4 U.S. gal 58 L 15.4 U.S. gal 58 L 15.4 U.S. gal
Hydraulic Tank Capacity 35 L 9.2 U.S. gal 35 L 9.2 U.S. gal 35 L 9.2 U.S. gal
Hydraulic System Capacity
(includes tank) 55 L 14.5 U.S. gal 55 L 14.5 U.S. gal 55 L 14.5 U.S. gal
Hydraulic Pump Capacity 60 L/min 15.6 gpm 60 L/min 15.6 gpm 60 L/min 15.6 gpm

3-2 Edition 40
 Specifications Skid Steer Loaders

MODEL 236B2 242B2 252B2

Flywheel Power: Net 53 kW 71 hp 42 kW 56 hp 53 kW 71 hp
3
Flywheel Power: Gross 56 kW 75 hp 46 kW 62 hp 56 kW 75 hp
Engine Model C3.4 DIT C2.2T C3.4 DIT
Rated Engine RPM 2500 3000 2500
Bore 94 mm 3.7" 84 mm 3.3" 94 mm 3.7"
Stroke 120 mm 4.7" 100 mm 3.9" 120 mm 4.7"
Displacement 3.3 L 201 in3 2.2 L 134 in3 3.3 L 201 in3
No. Cylinders 4 4 4
One Speed Forward 0-12.1 km/h 0-7.5 mph 0-12 km/h 0-7.5 mph 0-11.9 km/h 0-7.4 mph
Two Speed Forward 0-18.1 km/h 0-11.2 mph — 0-17.8 km/h 0-11 mph
One Speed Reverse 0-12.1 km/h 0-7.5 mph 0-12 km/h 0-7.5 mph 0-11.9 km/h 0-7.4 mph
Two Speed Reverse 0-18.1 km/h 0-11.2 mph — 0-17.8 km/h 0-11 mph
Hydraulic Cycle Time, Empty Bucket: Seconds Seconds Seconds
Raise 2.7 3.0 4.8
Dump 2.2 2.2 2.2
Lower (Empty, Float Down) 2.8 3.0 3.6
Total 7.7 8.2 10.6
Tread Width 1514 mm 5'0" 1362 mm 4'6" 1514 mm 5'0"
Width Over Tires 1676 mm 5'6" 1676 mm 5'6" 1829 mm 6'0"
Ground Clearance 235 mm 9.0" 178 mm 7.0" 196 mm 7.7"
Fuel Tank Capacity 90 L 23.8 U.S. gal 58 L 15.3 U.S. gal 90 L 23.8 U.S. gal
Hydraulic Tank Capacity 35 L 9.2 U.S. gal 35 L 9.2 U.S. gal 35 L 9.2 U.S. gal
Hydraulic System Capacity
(includes tank) 52 L 13.7 U.S. gal 55 L 14.5 U.S. gal 53 L 14 U.S. gal
Hydraulic Pump Capacity 77 L/min 20.3 gpm 60 L/min 15.6 gpm 77 L/min 20.3 gpm

Edition 40 3-3
Skid Steer Loaders Specifications

MODEL 246C 256C 262C 272C

Flywheel Power: Net 54 kW 73 hp 61 kW 82 hp 61 kW 82 hp 67 kW 90 hp
Flywheel Power: Gross 56 kW 75 hp 63 kW 84 hp 63 kW 84 hp 70 kW 94 hp
Engine Model C3.4 DIT C3.4 DIT C3.4 DIT C3.4 DIT
Rated Engine RPM 2500 2500 2500 2500
Bore 94 mm 3.7" 94 mm 3.7" 94 mm 3.7" 94 mm 3.7"
Stroke 120 mm 4.7" 120 mm 4.7" 120 mm 4.7" 120 mm 4.7"
Displacement 3.3 L 201 in3 3.3 L 201 in3 3.3 L 201 in3 3.3 L 201 in3
No. Cylinders 4 4 4 4
One Speed Forward 0-12.5 km/h 0-7.7 mph 0-12.5 km/h 0-7.7 mph 0-12.5 km/h 0-7.7 mph 0-11.6 km/h 0-7.2 mph
Two Speed Forward 0-19.3 km/h 0-12 mph 0-19.3 km/h 0-12 mph 0-19.3 km/h 0-12 mph 0-16.1 km/h 0-10 mph
One Speed Reverse 0-12.5 km/h 0-7.7 mph 0-12.5 km/h 0-7.7 mph 0-12.5 km/h 0-7.7 mph 0-11.6 km/h 0-7.2 mph
Two Speed Reverse 0-19.3 km/h 0-12 mph 0-19.3 km/h 0-12 mph 0-19.3 km/h 0-12 mph 0-16.1 km/h 0-10 mph
Hydraulic Cycle Time,
Empty Bucket: Seconds Seconds Seconds Seconds
Raise (HF) 3.1 (3.1) 3.1 (3.1) 4.7 (4.5) 4.7 (4.5)
Dump (HF) 2.5 (2.5) 2.5 (2.5) 2.5 (2.5) 2.5 (2.5)
Lower (Empty,
Float Down) (HF) 4.0 (3.6) 4.0 (3.6) 4.6 (4.7) 4.6 (4.7)
Total (HF) 9.6 (9.2) 9.6 (9.2) 11.8 (11.7) 11.8 (11.7)
Tread Width (HF) 1371 mm 4'6" 1371 mm 4'6" 1371 mm 4'6" 1371 mm 4'6"
(1524 mm) (5'0") (1524 mm) (5'0") (1524 mm) (5'0") (1524 mm) (5'0")
Width Over Tires 1676 mm 5'6" 1676 mm 5'6" 1676 mm 5'6" 1676 mm 5'6"
Ground Clearance 225 mm 8.9" 225 mm 8.9" 225 mm 8.9" 225 mm 8.9"
Fuel Tank Capacity 98 L 26 U.S. gal 98 L 26 U.S. gal 98 L 26 U.S. gal 98 L 26 U.S. gal
Hydraulic Tank Capacity 42 L 11 U.S. gal 42 L 11 U.S. gal 42 L 11 U.S. gal 42 L 11 U.S. gal
Hydraulic System Capacity
(includes tank) 57 L 15 U.S. gal 57 L 15 U.S. gal 57 L 15 U.S. gal 57 L 15 U.S. gal
Hydraulic Pump Capacity 84 L/min 22 gpm 84 L/min 22 gpm 84 L/min 22 gpm 84 L/min 22 gpm
HF = High Flow

3-4 Edition 40
 Performance Data Skid Steer Loaders
● 216B2/226B2/226B2 HF

Bucket Type General Purpose Multi-Purpose

Bucket Width 1520 mm (60") 1680 mm (66") 1520 mm (60")
Tire Size 10 x 16.5 10 x 16.5 10 x 16.5 3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 165-6152 152-0224 152-0223 165-6153 152-0226 152-0225 154-5004 154-5045
Rated bucket capacity m3 0.36 0.37 0.36 0.40 0.40 0.41 0.30 0.31
yd3 0.47 0.48 0.47 0.52 0.52 0.53 0.39 0.41
Struck capacity m3 0.26 0.27 0.26 0.29 0.29 0.29 0.22 0.22
yd3 0.34 0.35 0.34 0.38 0.38 0.38 0.29 0.29
Width mm 1576 1586 1576 1730 1740 1730 1595 1595
in 62 62 62 68 68 68 63 63
Dump clearance at maximum lift/dump mm 2133 2103 2069 2130 2100 2066 2122 2092
in 84 83 81 84 83 81 84 82
Reach at maximum lift/dump mm 546 557 620 549 560 623 560 571
in 21 22 24 22 22 25 22 22
Floor angle at maximum lift/dump degrees 39.9° 39.9° 39.9° 40° 40° 40° 40.2° 40.2°
Floor angle at maximum lift/rack back degrees 96.7° 96.7° 96.7° 96.5° 96.5° 96.5° 96.4° 96.4°
Clearance at maximum lift/level bucket mm 2658 2642 2657 2656 2640 2655 2655 2683
in 105 104 105 105 104 105 105 106
Hinge pin height at maximum lift mm 2849 2849 2849 2849 2849 2849 2849 2849
in 112 112 112 112 112 112 112 112
Maximum overall height mm 3762 3790 3860 3759 3787 3857 3746 3774
in 148 149 152 148 149 152 147 149
Reach at level lift arm/bucket mm 1333 1361 1431 1335 1363 1433 1346 1374
in 52 54 56 53 54 56 53 54
Maximum floor angle at minimum lift degrees 26.1° 26.1° 26.1° 26° 26° 26° 25.8° 25.8°
Dig depth with level bucket mm 0 16 1 0 16 1 0 15
in 0.0 0.6 0.0 0.0 0.6 0.0 0.0 0.6
Overall length with bucket on ground mm 3286 3314 3384 3286 3314 3384 3290 3318
in 129 130 133 129 130 133 130 131
Front clearance circle radius (with bucket) mm 1989 2016 2079 2021 2048 2110 1992 2020
in 78 79 82 80 81 83 78 80
Tipping load kg 1213 1158 1187 1194 1140 1171 1074 1031
216B2
lb 2673 2554 2616 2631 2513 2582 2367 2272
kg 1293 1238 1267 1274 1219 1251 1153 1109
226B2
lb 2850 2729 2792 2808 2688 2759 2541 2445
kg 1382 1326 1356 1363 1308 1340 1240 1196
226B2 HF
lb 3047 2924 2988 3004 2883 2954 2734 2637
Breakout force — lift kg 1437 1389 1421 1424 1374 1408 1330 1286
216B2
lb 3168 3062 3132 3140 3030 3104 2932 2835
kg 1437 1389 1421 1424 1374 1408 1330 1286
226B2
lb 3168 3062 3132 3140 3030 3104 2932 2835
kg 1425 1377 1409 1412 1363 1396 1318 1274
226B2 HF
lb 3142 3036 3105 3113 3004 3078 2905 2809
Breakout force — tilt kg 1700 1596 1681 1694 1590 1677 1631 1539
216B2
lb 3747 3518 3705 3735 3506 3697 3596 3393
kg 1700 1596 1681 1694 1590 1677 1631 1539
226B2
lb 3747 3518 3705 3735 3506 3697 3596 3393
kg 1700 1596 1681 1694 1590 1677 1631 1539
226B2 HF
lb 3747 3518 3706 3735 3506 3697 3596 3393
Operating weight kg 2637 2667 2654 2654 2687 2670 2769 2798
216B2
lb 5814 5880 5850 5851 5924 5887 6103 6169
kg 2669 2699 2686 2686 2719 2702 2801 2830
226B2
lb 5885 5951 5921 5922 5994 5958 6174 6240
kg 2761 2791 2777 2778 2811 2794 2892 2922
226B2 HF
lb 6087 6153 6123 6124 6196 6160 6376 6442
HF = High Flow

Edition 40 3-5
Skid Steer Loaders Performance Data
● 216B2/226B2/226B2 HF

Bucket Type Multi-Purpose Dirt

Bucket Width 1520 mm 1680 mm 1520 mm 1680 mm
(60") (66") (60") (66")
Tire Size 10 x 16.5 10 x 16.5 10 x 16.5 10 x 16.5
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge Only Edge
Bucket Assembly No. 154-5046 154-5008 154-5047 154-5048 165-6156 152-0231 165-6157 152-0232
Rated bucket capacity m3 0.30 0.33 0.33 0.34 0.34 0.35 0.37 0.38
yd3 0.39 0.43 0.43 0.44 0.44 0.46 0.48 0.49
Struck capacity m3 0.22 0.24 0.25 0.24 0.25 0.25 0.27 0.27
yd3 0.29 0.31 0.33 0.31 0.33 0.33 0.35 0.35
Width mm 1595 1749 1749 1749 1576 1586 1730 1740
in 63 69 69 69 62 62 68 69
Dump clearance at maximum lift/dump mm 2058 2122 2092 2058 2169 2140 2169 2140
in 81 84 82 81 85 84 85 84
Reach at maximum lift/dump mm 634 560 571 634 505 520 505 520
in 25 22 22 25 20 20 20 20
Floor angle at maximum lift/dump degrees 40.2° 40.2° 40.2° 40.2° 39.9° 39.9° 39.9° 39.9°
Floor angle at maximum lift/rack back degrees 96.4° 96.4° 96.4° 96.4° 96.7° 96.7° 96.7° 96.7°
Clearance at maximum lift/level bucket mm 2654 2655 2683 2654 2661 2648 2661 2648
in 104 105 106 104 105 104 105 104
Hinge pin height at maximum lift mm 2849 2849 2849 2849 2849 2849 2849 2849
in 112 112 112 112 112 112 112 112
Maximum overall height mm 3844 3746 3774 3844 3709 3739 3709 3739
in 151 147 149 151 146 147 146 147
Reach at level lift arm/bucket mm 1444 1346 1374 1444 1280 1310 1280 1310
in 57 53 54 57 50 52 50 52
Maximum floor angle at minimum lift degrees 25.8° 25.8° 25.8° 25.8° 26.1° 26.1° 26.1° 26.1°
Dig depth with level bucket mm 1 0 16 1 0 16 0 16
in 0.0 0.0 0.6 0.0 0.0 0.6 0.0 0.6
Overall length with bucket on ground mm 3388 3290 3318 3388 3233 3263 3233 3263
in 133 130 131 133 127 128 127 128
Front clearance circle radius (with bucket) mm 2083 1992 2020 2113 1940 1970 1970 2000
in 82 78 80 83 76 78 78 79
Tipping load kg 1058 1053 1001 1032 1304 1251 1280 1223
216B2 lb 2332 2321 2207 2275 2875 2758 2823 2696
kg 1137 1132 1079 1111 1386 1332 1363 1304
226B2 lb 2506 2495 2379 2449 3056 2937 3004 2875
kg 1225 1219 1166 1199 1477 1422 1453 1394
226B2 HF lb 2700 2688 2571 2643 3257 3136 3204 3073
Breakout force — lift kg 1316 1314 1265 1298 1515 1466 1495 1444
216B2 lb 2900 2896 2789 2860 3339 3232 3295 3183
kg 1316 1314 1265 1298 1515 1466 1495 1444
226B2 lb 2900 2896 2789 2860 3339 3232 3295 3183
kg 1304 1302 1253 1286 1502 1454 1482 1432
226B2 HF lb 2874 2870 2763 2834 3312 3206 3268 3156
Breakout force — tilt kg 1620 1618 1518 1601 1853 1740 1842 1727
216B2 lb 3571 3568 3346 3529 4084 3835 4061 3807
kg 1620 1618 1518 1601 1853 1740 1842 1727
226B2 lb 3571 3568 3346 3529 4084 3835 4061 3807
kg 1620 1618 1518 1601 1853 1740 1842 1727
226B2 HF lb 3571 3568 3346 3529 4084 3835 4061 3807
Operating weight kg 2785 2787 2820 2803 2579 2609 2604 2637
216B2 lb 6139 6144 6216 6180 5685 5751 5740 5813
kg 2817 2819 2852 2835 2611 2641 2636 2669
226B2 lb 6210 6215 6287 6251 5756 5822 5811 5883
kg 2909 2911 2943 2927 2703 2732 2728 2760
226B2 HF lb 6412 6417 6489 6453 5958 6024 6013 6085
HF = High Flow

3-6 Edition 40
 Performance Data Skid Steer Loaders
● 216B2/226B2/226B2 HF

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Tire Size 10 x 16.5 10 x 16.5 10 x 16.5
Carriage Assembly No. 242-9998 242-9999 243-0000
Carriage overall width without step mm 1157 1157 1157
in 45 45 45
Carriage step additional width mm 108 108 108
in 4.25 4.25 4.25
Carriage height above blade top mm 923.5 923.5 923.5
in 36.4 36.4 36.4
Blade surface height at maximum height mm 2741 2741 2741
in 107.9 107.9 107.9
Shank front face reach at maximum height mm 290 290 290
in 11.4 11.4 11.4
Blade surface height at level lift arms mm 1383 1383 1383
in 54.4 54.4 54.4
Shank front face reach at level lift arms mm 743 743 743
in 29.3 29.3 29.3
Blade surface height at minimum lift mm 91 91 91
in 3.6 3.6 3.6
Shank front face reach at minimum lift mm 345 345 345
in 13.6 13.6 13.6
Overall length at minimum lift, level tine mm 3602 3762 3912
in 141.8 148.1 154.0
Tipping load kg 949 894 846
216B2
lb 2093 1970 1864
kg 1012 953 903
226B2
lb 2230 2102 1990
kg 1083 1022 968
226B2 HF
lb 2388 2252 2135
Operating weight kg 2620 2630 2640
216B2
lb 5775 5798 5820
kg 2652 2662 2672
226B2
lb 5846 5869 5890
kg 2743 2754 2763
226B2 HF
lb 6048 6071 6092
HF = High Flow

Edition 40 3-7
Skid Steer Loaders Performance Data
● 232B2

Bucket Type General Purpose

Bucket Width 1520 mm (60") 1680 mm (66") 1830 mm (72")
Tire Size 10 x 16.5 10 x 16.5 10 x 16.5
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 165-6152 152-0224 152-0223 165-6153 152-0226 152-0225 165-6154 152-0229 152-0228
Rated bucket capacity m3 0.36 0.37 0.36 0.40 0.40 0.41 0.44 0.44 0.45
yd3 0.47 0.48 0.47 0.52 0.52 0.53 0.57 0.57 0.59
Struck capacity m3 0.26 0.27 0.26 0.29 0.29 0.29 0.32 0.32 0.32
yd3 0.34 0.35 0.34 0.38 0.38 0.38 0.42 0.42 0.42
Width mm 1576 1586 1576 1730 1740 1730 1883 1893 1883
in 62 62 62 68 68 68 74 75 74
Dump clearance at maximum lift/dump mm 2220 2189 2148 2220 2189 2148 2220 2189 2148
in 87 86 85 87 86 85 87 86 85
Reach at maximum lift/dump mm 759 766 822 759 766 822 759 766 822
in 30 30 32 30 30 32 30 30 32
Floor angle at maximum lift/dump degrees 49.5° 49.5° 49.5° 49.5° 49.5° 49.5° 49.5° 49.5° 49.5°
Floor angle at maximum lift/rack back degrees 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9°
Clearance at maximum lift/level bucket mm 2831 2815 2830 2831 2815 2830 2831 2815 2830
in 111 111 111 111 111 111 111 111 111
Hinge pin height at maximum lift mm 3026 3026 3026 3026 3026 3026 3026 3026 3026
in 119 119 119 119 119 119 119 119 119
Maximum overall height mm 3907 3934 4004 3907 3934 4004 3907 3934 4004
in 154 155 158 154 155 158 154 155 158
Reach at level lift arm/bucket mm 1356 1384 1453 1356 1384 1453 1356 1384 1453
in 53 54 57 53 54 57 53 54 57
Maximum floor angle at minimum lift degrees 25.4° 25.4° 25.4° 25.4° 25.4° 25.4° 25.4° 25.4° 25.4°
Dig depth with level bucket mm 4 21 5 4 21 5 4 21 5
in 0.2 0.8 0.2 0.2 0.8 0.2 0.2 0.8 0.2
Overall length with bucket on ground mm 3490 3518 3588 3490 3518 3588 3490 3518 3588
in 137 139 141 137 139 141 137 139 141
Front clearance circle radius (with bucket) mm 2192 2224 2259 2221 2253 2286 2252 2283 2313
in 86 88 89 87 89 90 89 90 91
Tipping load kg 1754 1694 1726 1733 1676 1711 1725 1664 1703
lb 3866 3734 3806 3821 3694 3772 3804 3668 3754
Breakout force — lift kg 1662 1614 1646 1649 1599 1633 1642 1590 1627
lb 3665 3558 3628 3635 3525 3600 3621 3505 3586
Breakout force — tilt kg 1699 1595 1680 1693 1590 1676 1689 1583 1672
lb 3745 3517 3704 3733 3504 3695 3723 3491 3687
Operating weight kg 3090 3120 3106 3107 3139 3123 3114 3150 3131
lb 6812 6878 6848 6849 6921 6885 6866 6944 6902

3-8 Edition 40
 Performance Data Skid Steer Loaders
● 232B2

Bucket Type Multi-Purpose

Bucket Width 1520 mm (60") 1680 mm (66") 1830 mm (72")
Tire Size 10 x 16.5 10 x 16.5 10 x 16.5 3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 154-5004 154-5045 154-5046 154-5008 154-5047 154-5048 154-5010 154-5049 154-5050
Rated bucket capacity m3 0.30 0.31 0.30 0.33 0.33 0.34 0.37 0.37 0.37
yd3 0.39 0.41 0.39 0.43 0.43 0.44 0.48 0.48 0.48
Struck capacity m3 0.22 0.22 0.22 0.24 0.25 0.24 0.27 0.28 0.27
yd3 0.29 0.29 0.29 0.31 0.33 0.31 0.35 0.36 0.35
Width mm 1595 1595 1595 1749 1749 1749 1902 1902 1902
in 63 63 63 69 69 69 75 75 75
Dump clearance at maximum lift/dump mm 2218 2287 2143 2218 2287 2143 2218 2287 2143
in 87 90 84 87 90 84 87 90 84
Reach at maximum lift/dump mm 762 769 825 762 769 825 762 769 825
in 30 30 32 30 30 32 30 30 32
Floor angle at maximum lift/dump degrees 49.6° 49.6° 49.6° 49.6° 49.6° 49.6° 49.6° 49.6° 49.6°
Floor angle at maximum lift/rack back degrees 86.8° 86.8° 86.8° 86.8° 86.8° 86.8° 86.8° 86.8° 86.8°
Clearance at maximum lift/level bucket mm 2834 2818 2833 2834 2818 2833 2834 2818 2833
in 112 111 112 112 111 112 112 111 112
Hinge pin height at maximum lift mm 3026 3026 3026 3026 3026 3026 3026 3026 3026
in 119 119 119 119 119 119 119 119 119
Maximum overall height mm 3911 3938 4008 3911 3938 4008 3911 3938 4008
in 154 155 158 154 155 158 154 155 158
Reach at level lift arm/bucket mm 1360 1387 1457 1360 1387 1457 1360 1387 1457
in 54 55 57 54 55 57 54 55 57
Maximum floor angle at minimum lift degrees 25.3° 25.3° 25.3° 25.3° 25.3° 25.3° 25.3° 25.3° 25.3°
Dig depth with level bucket mm 3 19 4 3 19 4 3 19 4
in 0.1 0.7 0.2 0.1 0.7 0.2 0.1 0.7 0.2
Overall length with bucket on ground mm 3494 3522 3591 3494 3522 3591 3494 3522 3591
in 138 139 141 138 139 141 138 139 141
Front clearance circle radius (with bucket) mm 2182 2214 2249 2211 2243 2276 2242 2273 2303
in 86 87 89 87 88 90 88 89 91
Tipping load kg 1606 1560 1591 1586 1530 1566 1568 1509 1547
lb 3542 3439 3508 3495 3373 3451 3456 3327 3411
Breakout force — lift kg 1552 1508 1538 1536 1487 1520 1521 1470 1505
lb 3422 3324 3390 3386 3278 3351 3353 3240 3318
Breakout force — tilt kg 1631 1539 1619 1618 1517 1600 1609 1508 1594
lb 3595 3392 3569 3566 3344 3527 3547 3325 3513
Operating weight kg 3221 3251 3237 3239 3272 3256 3258 3294 3275
lb 7101 7167 7137 7142 7214 7178 7182 7262 7219

Edition 40 3-9
Skid Steer Loaders Performance Data
● 232B2

Bucket Type Dirt

Bucket Width 1520 mm (60") 1680 mm (66") 1830 mm (72")
Tire Size 10 x 16.5 10 x 16.5 10 x 16.5
Holes Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Only Edge Only Edge
Bucket Assembly No. 165-6156 152-0231 165-6157 152-0232 188-3526 188-2719
Rated bucket capacity m3 0.34 0.35 0.37 0.38 0.41 0.42
yd3 0.44 0.46 0.48 0.49 0.54 0.55
Struck capacity m3 0.25 0.25 0.27 0.27 0.29 0.31
yd3 0.33 0.33 0.35 0.35 0.38 0.41
Width mm 1576 1586 1730 1740 1883 1893
in 62 62 68 69 74 75
Dump clearance at maximum lift/dump mm 2261 2229 2261 2229 2261 2229
in 89 88 89 88 89 88
Reach at maximum lift/dump mm 724 732 724 732 724 732
in 29 29 29 29 29 29
Floor angle at maximum lift/dump degrees 49.5° 49.5° 49.5° 49.5° 49.5° 49.5°
Floor angle at maximum lift/rack back degrees 86.9° 86.9° 86.9° 86.9° 86.9° 86.9°
Clearance at maximum lift/level bucket mm 2831 2815 2831 2815 2831 2815
in 111 111 111 111 111 111
Hinge pin height at maximum lift mm 3026 3026 3026 3026 3026 3026
in 119 119 119 119 119 119
Maximum overall height mm 3854 3881 3854 3881 3854 3881
in 152 153 152 153 152 153
Reach at level lift arm/bucket mm 1302 1330 1302 1330 1302 1330
in 51 52 51 52 51 52
Maximum floor angle at minimum lift degrees 25.4° 25.4° 25.4° 25.4° 25.4° 25.4°
Dig depth with level bucket mm 4 20 4 20 4 20
in 0.2 0.8 0.2 0.8 0.2 0.8
Overall length with bucket on ground mm 3437 3465 3437 3465 3437 3465
in 135 136 135 136 135 136
Front clearance circle radius (with bucket) mm 2137 2169 2154 2185 2198 2229
in 84 85 85 86 87 88
Tipping load kg 1858 1799 1834 1771 1827 1760
lb 4095 3966 4043 3904 4027 3879
Breakout force — lift kg 1741 1692 1721 1669 1714 1660
lb 3838 3731 3793 3680 3779 3660
Breakout force — tilt kg 1852 1739 1841 1726 1838 1720
lb 4083 3833 4060 3806 4051 3791
Operating weight kg 3031 3061 3056 3089 3064 3100
lb 6683 6749 6738 6810 6755 6834

3-10 Edition 40
 Performance Data Skid Steer Loaders
● 232B2

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Tire Size 10 x 16.5 10 x 16.5 10 x 16.5
Carriage Assembly No. 242-9998 242-9999 243-0000
Carriage overall width without step mm 1157 1157 1157
in 45 45 45
Carriage step additional width mm 108 108 108
in 4.25 4.25 4.25
Carriage height above blade top mm 924 924 924
in 36.4 36.4 36.4
Blade surface height at maximum height mm 2911 2911 2911
in 114.6 114.6 114.6
Shank front face reach at maximum height mm 624 624 624
in 24.6 24.6 24.6
Blade surface height at level lift arms mm 1506 1506 1506
in 59.3 59.3 59.3
Shank front face reach at level lift arms mm 762 762 762
in 30.0 30.0 30.0
Blade surface height at minimum lift mm 56 56 56
in 2.2 2.2 2.2
Shank front face reach at minimum lift mm 468 468 468
in 18.4 18.4 18.4
Overall length at minimum lift, level tine mm 3806 3966 4116
in 149.8 156.1 162.0
Tipping load kg 1369 1294 1229
lb 3018 2852 2708
Operating weight kg 3072 3083 3092
lb 6773 6796 6817

Edition 40 3-11
Skid Steer Loaders Performance Data
● 236B2

Bucket Type General Purpose Multi-Purpose

Bucket Width 1680 mm (66") 1830 mm (72") 1680 mm (66")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 165-6153 152-0226 152-0225 165-6154 152-0229 152-0228 154-5008 154-5047
Rated bucket capacity m3 0.40 0.40 0.41 0.44 0.44 0.45 0.33 0.33
yd3 0.52 0.52 0.53 0.57 0.57 0.59 0.43 0.43
Struck capacity m3 0.29 0.29 0.29 0.32 0.32 0.32 0.24 0.25
yd3 0.38 0.38 0.38 0.42 0.42 0.42 0.31 0.33
Width mm 1730 1740 1730 1883 1893 1883 1749 1749
in 68 68 68 74 75 74 69 69
Dump clearance at maximum lift/dump mm 2360 2331 2299 2360 2331 2299 2356 2326
in 92.9 91.8 90.5 92.9 91.8 90.5 92.8 91.6
Reach at maximum lift/dump mm 587 593 655 581 594 656 591 605
in 23.1 23.3 25.8 22.9 23.4 25.8 23.3 23.8
Floor angle at maximum lift/dump degrees 39.9° 39.9° 39.9° 39.9° 39.9° 39.9° 40.1° 40.1°
Floor angle at maximum lift/rack back degrees 97.3° 97.3° 97.3° 97.3° 97.3° 97.3° 97.2° 97.2°
Clearance at maximum lift/level bucket mm 2904 2887 2902 2904 2887 2902 2905 2889
in 114.3 113.7 114.3 114.3 113.7 114.3 114.4 113.7
Hinge pin height at maximum lift mm 3098 3227 3227 3227 3227 3227 3227 3227
in 122.0 127.0 127.0 127.0 127.0 127.0 127.0 127.0
Maximum overall height mm 4014 4042 4112 4014 4042 4111 4019 4046
in 158.0 159.1 161.9 158.0 159.1 161.9 158.2 159.3
Reach at level lift arm/bucket mm 1409 1438 1507 1409 1439 1508 1419 1449
in 55.5 56.6 59.3 55.5 56.7 59.4 55.9 57.0
Maximum floor angle at minimum lift degrees 27.9° 27.9° 27.9° 27.9° 27.9° 27.9° 27.3° 27.3°
Dig depth with level bucket mm 0 16 1 0 16 1 0 16
in 0 0.63 0.04 0 0.63 0.04 0 0.63
Overall length with bucket on ground mm 3568 3596 3666 3568 3596 3666 3572 3600
in 140.5 141.6 144.3 140.5 141.6 144.3 140.6 141.7
Front clearance circle radius (with bucket) mm 2134 2165 2198 2166 2197 2226 2136 2168
in 84.0 85.2 86.5 85.3 86.5 87.6 84.1 85.4
Tipping load kg 1690 1634 1668 1682 1622 1660 1544 1490
lb 3726 3603 3678 3709 3577 3660 3405 3285
Breakout force — lift kg 2032 1976 2016 2025 1968 2009 1919 1864
lb 4481 4357 4445 4465 4339 4430 4231 4110
Breakout force — tilt kg 2303 2178 2286 2299 2173 2284 2226 2105
lb 5078 4802 5041 5069 4791 5036 4908 4642
Operating weight kg 3228 3261 3244 3236 3271 3252 3361 3394
lb 7118 7191 7153 7135 7213 7171 7411 7484

3-12 Edition 40
 Performance Data Skid Steer Loaders
● 236B2

Bucket Type Multi-Purpose Dirt

Bucket Width 1680 mm 1830 mm 1520 mm 1680 mm
(66") (72") (60") (66") 3
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 12 x 16.5
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge Only Edge
Bucket Assembly No. 154-5048 154-5010 154-5049 154-5050 165-6156 152-0231 165-6157 152-0232
Rated bucket capacity m3 0.34 0.37 0.37 0.37 0.34 0.35 0.37 0.38
yd3 0.44 0.48 0.48 0.48 0.44 0.46 0.48 0.49
Struck capacity m3 0.24 0.27 0.28 0.27 0.25 0.25 0.27 0.27
yd3 0.31 0.35 0.36 0.35 0.33 0.33 0.35 0.35
Width mm 1749 1902 1902 1902 1576 1586 1730 1740
in 69 75 75 75 62 62 68 69
Dump clearance at maximum lift/dump mm 2292 2356 2326 2292 2398 2369 2398 2369
in 90.2 92.8 91.6 90.2 94.4 93.3 94.4 93.3
Reach at maximum lift/dump mm 665 591 605 665 540 554 541 555
in 26.2 23.3 23.8 26.2 21.3 21.8 21.3 21.9
Floor angle at maximum lift/dump degrees 40.1° 40.1° 40.1° 40.1° 39.9° 39.9° 39.9° 39.9°
Floor angle at maximum lift/rack back degrees 97.2° 97.2° 97.2° 97.2° 97.4° 97.4° 97.4° 97.4°
Clearance at maximum lift/level bucket mm 2902 2904 2889 2902 2908 2893 2908 2892
in 114.3 114.3 113.7 114.3 114.5 113.9 114.5 113.9
Hinge pin height at maximum lift mm 3227 3227 3227 3227 3227 3227 3227 3227
in 127.0 127.0 127.0 127.0 127.0 127.0 127.0 127.0
Maximum overall height mm 4116 4018 4046 4116 3965 3992 3965 3992
in 162.0 158.2 159.3 162.0 156.1 157.2 156.1 157.2
Reach at level lift arm/bucket mm 1518 1420 1449 1518 1356 1385 1357 1386
in 59.8 55.9 57.0 59.8 53.4 54.5 53.4 54.6
Maximum floor angle at minimum lift degrees 27.3° 27.3° 27.3° 27.3° 28° 28° 28° 28°
Dig depth with level bucket mm 1 0 16 1 0 16 0 16
in 0.04 0 0.63 0.04 0 0.63 0 0.63
Overall length with bucket on ground mm 3670 3572 3600 3670 3515 3543 3515 3543
in 144.5 140.6 141.7 144.5 138.4 139.5 138.4 139.5
Front clearance circle radius (with bucket) mm 2200 2168 2200 2229 2067 2094 2097 2125
in 86.6 85.4 86.6 87.8 81.4 82.4 82.6 83.7
Tipping load kg 1525 1526 1470 1506 1811 1754 1787 1727
lb 3363 3365 3241 3321 3993 3868 3940 3808
Breakout force — lift kg 1902 1903 1847 1888 2132 2078 2112 2055
lb 4194 4196 4073 4163 4701 4582 4657 4531
Breakout force — tilt kg 2210 2217 2097 2204 2497 2361 2487 2349
lb 4873 4888 4624 4860 5506 5206 5484 5180
Operating weight kg 3377 3379 3415 3396 3153 3183 3178 3211
lb 7446 7451 7530 7488 6952 7019 7007 7080

Edition 40 3-13
Skid Steer Loaders Performance Data
● 236B2

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Carriage Assembly No. 242-9998 242-9999 243-0000
Carriage overall width without step mm 1157 1157 1157
in 45 45 45
Carriage step additional width mm 108 108 108
in 4.25 4.25 4.25
Carriage height above blade top mm 923.5 923.5 923.5
in 36.4 36.4 36.4
Blade surface height at maximum height mm 2969 2969 2969
in 116 116 116
Shank front face reach at maximum height mm 271 271 271
in 10.7 10.7 10.7
Blade surface height at level lift arms mm 1494 1494 1494
in 58 58 58
Shank front face reach at level lift arms mm 762 762 762
in 30 30 30
Blade surface height at minimum lift mm 71 71 71
in 2.8 2.8 2.8
Shank front face reach at minimum lift mm 339 339 339
in 13 13 13
Overall length at minimum lift, level tine mm 3884 4044 4194
in 152.9 159.2 165.1
Tipping load kg 1343 1272 1211
lb 2961 2805 2670
Operating weight kg 3194 3204 3214
lb 7043 7065 7087

3-14 Edition 40
 Performance Data Skid Steer Loaders
● 242B2/242B2 HF

Bucket Type General Purpose

Bucket Width 1520 mm (60") 1680 mm (66") 1830 mm (72")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 165-6152 152-0224 152-0223 165-6153 152-0226 152-0225 165-6154 152-0229 152-0228
Rated bucket capacity m3 0.36 0.37 0.36 0.40 0.40 0.41 0.44 0.44 0.45
yd3 0.47 0.48 0.47 0.52 0.52 0.53 0.57 0.57 0.59
Struck capacity m3 0.26 0.27 0.26 0.29 0.29 0.29 0.32 0.32 0.32
yd3 0.34 0.35 0.34 0.38 0.38 0.38 0.42 0.42 0.42
Width mm 1576 1586 1576 1730 1740 1730 1883 1893 1883
in 62 62 62 68 68 68 74 75 74
Dump clearance at maximum lift/dump mm 2240 2209 2168 2240 2209 2166 2240 2209 2166
in 88 87 85 88 87 85 88 87 85
Reach at maximum lift/dump mm 759 766 822 759 766 822 759 766 822
in 30 30 32 30 30 32 30 30 32
Floor angle at maximum lift/dump degrees 49.5° 49.5° 49.5° 49.5° 49.5° 49.5° 49.5° 49.5° 49.5°
Floor angle at maximum lift/rack back degrees 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9°
Clearance at maximum lift/level bucket mm 2851 2835 2850 2851 2835 2850 2851 2835 2850
in 112 112 112 112 112 112 112 112 112
Hinge pin height at maximum lift mm 3046 3046 3046 3046 3046 3046 3046 3046 3046
in 120 120 120 120 120 120 120 120 120
Maximum overall height mm 3927 3954 4024 3927 3954 4024 3927 3954 4024
in 155 156 158 155 156 158 155 156 158
Reach at level lift arm/bucket mm 1356 1384 1453 1356 1384 1453 1356 1384 1453
in 53 54 57 53 54 57 53 54 57
Maximum floor angle at minimum lift degrees 25.4° 25.4° 25.4° 25.4° 25.4° 25.4° 25.4° 25.4° 25.4°
Dig depth with level bucket mm 4 21 5 4 21 5 4 21 5
in 0.2 0.8 0.2 0.2 0.8 0.2 0.2 0.8 0.2
Overall length with bucket on ground mm 3490 3518 3588 3490 3518 3588 3490 3518 3588
in 137 139 141 137 139 141 137 139 141
Front clearance circle radius (with bucket) mm 2192 2224 2259 2221 2253 2286 2252 2283 2313
in 86 88 89 87 89 90 89 90 91
Tipping load kg 1843 1782 1815 1822 1764 1800 1814 1752 1792
242B2
lb 4062 3928 4001 4017 3888 3968 4000 3862 3950
kg 1904 1843 1876 1884 1824 1861 1875 1812 1853
242B2 HF
lb 4197 4062 4137 4152 4022 4103 4135 3996 4085
Breakout force — lift kg 1662 1614 1646 1649 1599 1633 1642 1590 1627
242B2
lb 3665 3558 3628 3635 3525 3600 3621 3505 3586
kg 1652 1604 1636 1639 1589 1623 1633 1580 1617
242B2 HF
lb 3643 3537 3607 3614 3503 3578 3599 3484 3564
Breakout force — tilt kg 1699 1595 1680 1693 1590 1676 1689 1583 1672
242B2
lb 3745 3517 3704 3733 3504 3695 3723 3491 3687
kg 1699 1595 1680 1693 1590 1676 1689 1583 1672
242B2 HF
lb 3745 3517 3704 3733 3504 3695 3723 3491 3687
Operating weight kg 3170 3200 3186 3187 3220 3203 3194 3230 3211
242B2
lb 6988 7054 7024 7025 7098 7061 7042 7121 7078
kg 3225 3254 3241 3241 3274 3258 3249 3285 3265
242B2 HF
lb 7109 7175 7145 7146 7218 7182 7163 7241 7199
HF = High Flow

Edition 40 3-15
Skid Steer Loaders Performance Data
● 242B2/242B2 HF

Bucket Type Multi-Purpose

Bucket Width 1520 mm (60") 1680 mm (66") 1830 mm (72")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 154-5004 154-5045 154-5046 154-5008 154-5047 154-5048 154-5010 154-5049 154-5050
Rated bucket capacity m3 0.30 0.31 0.30 0.33 0.33 0.34 0.37 0.37 0.37
yd3 0.39 0.41 0.39 0.43 0.43 0.44 0.48 0.48 0.48
Struck capacity m3 0.22 0.22 0.22 0.24 0.25 0.24 0.27 0.28 0.27
yd3 0.29 0.29 0.29 0.31 0.33 0.31 0.35 0.36 0.35
Width mm 1595 1595 1595 1749 1749 1749 1902 1902 1902
in 63 63 63 69 69 69 75 75 75
Dump clearance at maximum lift/dump mm 2238 2207 2163 2238 2207 2163 2238 2207 2163
in 88 87 85 88 87 85 88 87 85
Reach at maximum lift/dump mm 762 769 825 762 769 825 762 769 825
in 30 30 32 30 30 32 30 30 32
Floor angle at maximum lift/dump degrees 49.6° 49.6° 49.6° 49.6° 49.6° 49.6° 49.6° 49.6° 49.6°
Floor angle at maximum lift/rack back degrees 86.8° 86.8° 86.8° 86.8° 86.8° 86.8° 86.8° 86.8° 86.8°
Clearance at maximum lift/level bucket mm 2854 2838 2853 2854 2838 2853 2854 2838 2853
in 112 112 112 112 112 112 112 112 112
Hinge pin height at maximum lift mm 3046 3046 3046 3046 3046 3046 3046 3046 3046
in 120 120 120 120 120 120 120 120 120
Maximum overall height mm 3931 3958 4028 3931 3958 4028 3931 3958 4028
in 155 156 159 155 156 159 155 156 159
Reach at level lift arm/bucket mm 1360 1387 1457 1360 1387 1457 1360 1387 1457
in 54 55 57 54 55 57 54 55 57
Maximum floor angle at minimum lift degrees 25.3° 25.3° 25.3° 25.3° 25.3° 25.3° 25.3° 25.3° 25.3°
Dig depth with level bucket mm 3 19 4 3 19 4 3 19 4
in 0.1 0.7 0.2 0.1 0.7 0.2 0.1 0.7 0.2
Overall length with bucket on ground mm 3494 3522 3591 3494 3522 3591 3494 3522 3591
in 138 139 141 138 139 141 138 139 141
Front clearance circle radius (with bucket) mm 2182 2214 2249 2211 2243 2276 2242 2273 2303
in 86 87 89 87 88 90 88 89 91
Tipping load kg 1694 1647 1679 1673 1617 1653 1655 1596 1635
242B2
lb 3735 3630 3702 3689 3565 3645 3649 3518 3605
kg 1754 1707 1740 1734 1677 1714 1716 1656 1695
242B2 HF
lb 3868 3762 3835 3822 3697 3778 3782 3650 3737
Breakout force — lift kg 1552 1508 1538 1536 1487 1520 1521 1470 1505
242B2
lb 3422 3324 3390 3386 3278 3351 3353 3240 3318
kg 1543 1498 1528 1526 1477 1510 1511 1460 1495
242B2 HF
lb 3401 3302 3369 3365 3257 3329 3331 3218 3297
Breakout force — tilt kg 1631 1539 1619 1618 1517 1600 1609 1508 1594
242B2
lb 3595 3392 3569 3566 3344 3527 3547 3325 3513
kg 1631 1539 1619 1618 1517 1600 1609 1508 1594
242B2 HF
lb 3595 3392 3569 3566 3344 3527 3547 3325 3513
Operating weight kg 3301 3331 3317 3320 3352 3336 3338 3374 3355
242B2
lb 7277 7344 7314 7318 7391 7354 7359 7439 7396
kg 3356 3386 3372 3374 3407 3390 3393 3429 3409
242B2 HF
lb 7398 7464 7434 7439 7511 7475 7479 7559 7516
HF = High Flow

3-16 Edition 40
 Performance Data Skid Steer Loaders
● 242B2/242B2 HF

Bucket Type Dirt

Bucket Width 1520 mm (60") 1680 mm (66") 1830 mm (72")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 3
Holes Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Only Edge Only Edge
Bucket Assembly No. 165-6156 152-0231 165-6157 152-0232 188-3526 188-2719
Rated bucket capacity m3 0.34 0.35 0.37 0.38 0.41 0.42
yd3 0.44 0.46 0.48 0.49 0.54 0.55
Struck capacity m3 0.25 0.25 0.27 0.27 0.29 0.31
yd3 0.33 0.33 0.35 0.35 0.38 0.41
Width mm 1576 1586 1730 1740 1883 1893
in 62 62 68 69 74 75
Dump clearance at maximum lift/dump mm 2281 2249 2281 2249 2281 2249
in 90 89 90 89 90 89
Reach at maximum lift/dump mm 724 732 724 732 724 732
in 29 29 29 29 29 29
Floor angle at maximum lift/dump degrees 49.5° 49.5° 49.5° 49.5° 49.5° 49.5°
Floor angle at maximum lift/rack back degrees 86.9° 86.9° 86.9° 86.9° 86.9° 86.9°
Clearance at maximum lift/level bucket mm 2851 2835 2851 2835 2851 2835
in 112 112 112 112 112 112
Hinge pin height at maximum lift mm 3046 3046 3046 3046 3046 3046
in 120 120 120 120 120 120
Maximum overall height mm 3874 3901 3874 3901 3874 3901
in 153 154 153 154 153 154
Reach at level lift arm/bucket mm 1302 1330 1302 1330 1302 1330
in 51 52 51 52 51 52
Maximum floor angle at minimum lift degrees 25.4° 25.4° 25.4° 25.4° 25.4° 25.4°
Dig depth with level bucket mm 4 20 4 20 4 20
in 0.2 0.8 0.2 0.8 0.2 0.8
Overall length with bucket on ground mm 3437 3465 3437 3465 3437 3465
in 135 136 135 136 135 136
Front clearance circle radius (with bucket) mm 2137 2169 2154 2185 2198 2229
in 84 85 85 86 87 88
Tipping load kg 1949 1889 1926 1862 1918 1850
242B2
lb 4297 4165 4246 4104 4229 4079
kg 2012 1951 1989 1924 1981 1912
242B2 HF
lb 4435 4302 4384 4241 4367 4216
Breakout force — lift kg 1741 1692 1721 1669 1714 1660
242B2
lb 3838 3731 3793 3680 3779 3660
kg 1731 1682 1711 1660 1704 1650
242B2 HF
lb 3816 3709 3771 3659 3757 3638
Breakout force — tilt kg 1852 1739 1841 1726 1838 1720
242B2
lb 4083 3833 4060 3806 4051 3791
kg 1852 1739 1841 1726 1838 1720
242B2 HF
lb 4083 3833 4060 3806 4051 3791
Operating weight kg 3111 3141 3136 3169 3144 3180
242B2
lb 6859 6925 6915 6987 6932 7011
kg 3166 3196 3191 3224 3199 3235
242B2 HF
lb 6980 7046 7035 7107 7052 7131
HF = High Flow

Edition 40 3-17
Skid Steer Loaders Performance Data
● 242B2/242B2 HF

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Carriage Assembly No. 242-9998 242-9999 243-0000
Carriage overall width without step mm 1157 1157 1157
in 45 45 45
Carriage step additional width mm 108 108 108
in 4.25 4.25 4.25
Carriage height above blade top mm 924 924 924
in 36.4 36.4 36.4
Blade surface height at maximum height mm 2931 2931 2931
in 115.4 115.4 115.4
Shank front face reach at maximum height mm 624 624 624
in 24.6 24.6 24.6
Blade surface height at level lift arms mm 1526 1526 1526
in 60.1 60.1 60.1
Shank front face reach at level lift arms mm 762 762 762
in 30.0 30.0 30.0
Blade surface height at minimum lift mm 76 76 76
in 3.0 3.0 3.0
Shank front face reach at minimum lift mm 468 468 468
in 18.4 18.4 18.4
Overall length at minimum lift, level tine mm 3806 3966 4116
in 149.8 156.1 162.0
Tipping load kg 1432 1354 1286
242B2
lb 3158 2985 2835
kg 1481 1400 1330
242B2 HF
lb 3264 3086 2932
Operating weight kg 3152 3163 3172
242B2
lb 6950 6973 6994
kg 3207 3217 3227
242B2 HF
lb 7070 7093 7114
HF = High Flow

3-18 Edition 40
 Performance Data Skid Steer Loaders
● 252B2

Bucket Type General Purpose Multi-Purpose

Bucket Width 1680 mm (66") 1830 mm (72") 1680 mm (66")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 165-6153 152-0226 152-0225 165-6154 152-0229 152-0228 154-5008 154-5047
Rated bucket capacity m3 0.40 0.40 0.41 0.44 0.44 0.45 0.33 0.33
yd3 0.52 0.52 0.53 0.57 0.57 0.59 0.43 0.43
Struck capacity m3 0.29 0.29 0.29 0.32 0.32 0.32 0.24 0.25
yd3 0.38 0.38 0.38 0.42 0.42 0.42 0.31 0.33
Width mm 1730 1740 1730 1883 1893 1883 1749 1749
in 68 68 68 74 75 74 69 69
Dump clearance at maximum lift/dump mm 2439 2394 2318 2439 2394 2318 2435 2392
in 96.0 94.3 91.3 96.0 94.3 91.3 95.9 94.2
Reach at maximum lift/dump mm 769 780 841 769 780 841 773 784
in 30.3 30.7 33.1 30.3 30.7 33.1 30.4 30.9
Floor angle at maximum lift/dump degrees 51° 51° 51° 51° 51° 51° 51° 51°
Floor angle at maximum lift/rack back degrees 87° 87° 87° 87° 87° 87° 87° 87°
Clearance at maximum lift/level bucket mm 3039 3032 3031 3039 3032 3031 3039 3032
in 119.6 119.4 119.3 119.6 119.4 119.3 119.6 119.4
Hinge pin height at maximum lift mm 3227 3227 3227 3227 3227 3227 3227 3227
in 127 127 127 127 127 127 127 127
Maximum overall height mm 4091 4131 4229 4091 4131 4229 4096 4135
in 161.1 162.6 166.5 161.1 162.6 166.5 161.3 162.8
Reach at level lift arm/bucket mm 1290 1331 1429 1290 1331 1429 1295 1335
in 50.8 52.4 56.3 50.8 52.4 56.3 51 52.3
Maximum floor angle at minimum lift degrees 27° 27° 27° 27° 27° 27° 27° 27°
Dig depth with level bucket mm 0 16 1 0 16 1 0 16
in 0 0.63 0.04 0 0.63 0.04 0 0.63
Overall length with bucket on ground mm 3628 3669 3767 3628 3669 3767 3633 3673
in 142.8 144.4 148.3 142.8 144.4 148.3 143 144.6
Front clearance circle radius (with bucket) mm 2187 2234 2298 2217 2264 2325 2191 2236
in 86.1 88 90.5 87.3 89.1 91.5 86.3 88
Tipping load kg 2370 2305 2350 2364 2299 2342 2217 2158
lb 5226 5083 5182 5213 5069 5164 4888 4758
Breakout force — lift kg 2303 2247 2287 2296 2238 2280 2187 2133
lb 5078 4955 5043 5063 4935 5027 4822 4703
Breakout force — tilt kg 2317 2189 2299 2312 2183 2296 2233 2110
lb 5109 4827 5069 5098 4814 5063 4924 4653
Operating weight kg 3603 3635 3619 3610 3646 3627 3735 3768
lb 7945 8015 7980 7960 8039 7998 8236 8308

Edition 40 3-19
Skid Steer Loaders Performance Data
● 252B2

Bucket Type Multi-Purpose Dirt

Bucket Width 1680 mm 1830 mm 1520 mm 1680 mm
(66") (72") (60") (66")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 12 x 16.5
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge Only Edge
Bucket Assembly No. 154-5048 154-5010 154-5049 154-5050 165-6156 152-0231 165-6157 152-0232
Rated bucket capacity m3 0.34 0.37 0.37 0.37 0.34 0.35 0.37 0.38
yd3 0.44 0.48 0.48 0.48 0.44 0.46 0.48 0.49
Struck capacity m3 0.24 0.27 0.28 0.27 0.25 0.25 0.27 0.27
yd3 0.31 0.35 0.36 0.35 0.33 0.33 0.35 0.35
Width mm 1749 1902 1902 1902 1576 1586 1730 1740
in 69 75 75 75 62 62 68 69
Dump clearance at maximum lift/dump mm 2316 2435 2392 2316 2435 2403 2435 2403
in 91.2 95.9 94.2 91.2 95.9 94.6 95.9 94.6
Reach at maximum lift/dump mm 845 773 784 845 746 752 746 752
in 33.3 30.4 30.9 33.3 29.4 29.6 29.4 29.6
Floor angle at maximum lift/dump degrees 51° 51° 51° 51° 51° 51° 51° 51°
Floor angle at maximum lift/rack back degrees 87° 87° 87° 87° 87° 87° 87° 87°
Clearance at maximum lift/level bucket mm 3031 3039 3032 3031 3039 3032 3039 3032
in 119.3 119.6 119.4 119.3 119.6 119.4 119.6 119.4
Hinge pin height at maximum lift mm 3227 3227 3227 3227 3227 3227 3227 3227
in 127 127 127 127 127 127 127 127
Maximum overall height mm 4232 4096 4136 4232 4078 4105 4078 4105
in 166.6 161.3 162.8 166.6 160.6 161.6 160.6 161.6
Reach at level lift arm/bucket mm 1433 1295 1335 1433 1630 1587 1603 1587
in 56.4 51 52.3 56.4 64.2 65.5 64.2 65.5
Maximum floor angle at minimum lift degrees 27° 27° 27° 27° 27° 27° 27° 27°
Dig depth with level bucket mm 1 0 16 1 0 16 0 16
in 0.04 0 0.63 0.04 0 0.63 0 0.63
Overall length with bucket on ground mm 3771 3633 3673 3771 3616 3644 3616 3644
in 148.5 143 144.6 148.5 142.4 143.5 142.4 143.5
Front clearance circle radius (with bucket) mm 2301 2222 2267 2328 2161 2193 2190 2222
in 90.6 87.5 89.3 91.7 85.1 86.3 86.2 87.5
Tipping load kg 2198 2199 2137 2179 2510 2446 2487 2419
lb 4847 4849 4712 4805 5535 5393 5484 5334
Breakout force — lift kg 2171 2172 2115 2156 2404 2349 2383 2326
lb 4787 4789 4664 4754 5301 5180 5255 5129
Breakout force — tilt kg 2216 2225 2101 2209 2515 2375 2504 2362
lb 4886 4906 4633 4871 5546 5237 5521 5208
Operating weight kg 3751 3753 3790 3770 3527 3557 3552 3585
lb 8271 8275 8357 8313 7777 7843 7832 7905

3-20 Edition 40
 Performance Data Skid Steer Loaders
● 252B2

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Carriage Assembly No. 242-9998 242-9999 243-0000
Carriage overall width without step mm 1157 1157 1157
in 45 45 45
Carriage step additional width mm 108 108 108
in 4.25 4.25 4.25
Carriage height above blade top mm 923.5 923.5 923.5
in 36.4 36.4 36.4
Blade surface height at maximum height mm 3124 3124 3124
in 123 123 123
Shank front face reach at maximum height mm 671 671 671
in 26.4 26.4 26.4
Blade surface height at level lift arms mm 1695 1695 1695
in 66.7 66.7 66.7
Shank front face reach at level lift arms mm 737 737 737
in 29 29 29
Blade surface height at minimum lift mm 79 79 79
in 3.1 3.1 3.1
Shank front face reach at minimum lift mm 387 387 387
in 15.2 15.2 15.2
Overall length at minimum lift, level tine mm 3985 4145 4295
in 156.9 163.2 169.1
Tipping load kg 1885 1787 1703
lb 4156 3940 3755
Operating weight kg 3568 3578 3588
lb 7867 7889 7912

Edition 40 3-21
Skid Steer Loaders Performance Data
● 246C/256C

Bucket Type General Purpose

Bucket Width 1680 mm (66") 1830 mm (72") 1981 mm (78")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 279-5368 279-5369 279-5370 279-5372 279-5373 279-5374 279-5376 279-5377 279-5378
Rated bucket capacity m3 0.40 0.41 0.40 0.44 0.45 0.44 0.47 0.49 0.47
yd3 0.52 0.54 0.52 0.58 0.59 0.58 0.61 0.64 0.61
Struck capacity m3 0.29 0.29 0.29 0.32 0.32 0.32 0.34 0.34 0.34
yd3 0.38 0.38 0.38 0.42 0.42 0.42 0.44 0.44 0.44
Width mm 1730 1740 1730 1883 1893 1883 2035 2045 2035
in 68.1 68.5 68.1 74.1 74.5 74.1 80.1 80.5 80.1
Dump clearance at maximum lift/dump mm 2399 2385 2350 2399 2385 2350 2399 2385 2350
in 94.4 93.9 92.5 94.4 93.9 92.5 94.4 93.9 92.5
Reach at maximum lift/dump mm 627 655 725 627 655 725 627 655 725
in 24.7 25.8 28.5 24.7 25.8 28.5 24.7 25.8 28.5
Floor angle at maximum lift/dump degrees 40.1° 40.1° 40.1° 40.1° 40.1° 40.1° 40.1° 40.1° 40.1°
Floor angle at maximum lift/rack back degrees 94.8° 94.8° 94.8° 94.8° 94.8° 94.8° 94.8° 94.8° 94.8°
Clearance at maximum lift/level bucket mm 2928 2912 2928 2928 2912 2928 2928 2912 2928
in 115.3 114.6 115.3 115.3 114.6 115.3 115.3 114.6 115.3
Hinge pin height at maximum lift mm 3122 3122 3122 3122 3122 3122 3122 3122 3122
in 122.9 122.9 122.9 122.9 122.9 122.9 122.9 122.9 122.9
Maximum overall height mm 4051 4079 4149 4051 4079 4149 4051 4079 4149
in 159.5 160.6 163.3 159.5 160.6 163.3 159.5 160.6 163.3
Reach at level lift arm/bucket mm 1441 1469 1441 1441 1469 1441 1441 1469 1441
in 56.7 57.8 56.7 56.7 57.8 56.7 56.7 57.8 56.7
Maximum floor angle at minimum lift degrees 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 12 29 12 12 29 12 12 29 12
in 0.5 1.1 0.5 0.5 1.1 0.5 0.5 1.1 0.5
Overall length with bucket on ground mm 3692 3720 3790 3692 3720 3790 3692 3720 3790
in 145.4 146.5 149.2 145.4 146.5 149.2 145.4 146.5 149.2
Front clearance circle radius (with bucket) mm 2433 2447 2482 2433 2447 2482 2433 2447 2482
in 95.8 96.3 97.7 95.8 96.3 97.7 95.8 96.3 97.7
Tipping load kg 1910 1852 1888 1897 1835 1875 1883 1821 1860
246C
lb 4211 4083 4162 4182 4045 4134 4151 4015 4101
kg 2013 1955 1991 2000 1938 1978 1986 1923 1963
256C
lb 4438 4310 4389 4409 4273 4361 4378 4239 4328
Breakout force — lift kg 2654 2592 2638 2643 2578 2627 2634 2567 2616
246C
lb 5851 5714 5816 5827 5683 5792 5807 5659 5767
kg 2654 2592 2638 2643 2578 2627 2634 2567 2616
256C
lb 5851 5714 5816 5827 5683 5792 5807 5659 5767
Breakout force — tilt kg 3096 2937 3079 3089 2927 3072 3086 2923 3067
246C
lb 6825 6475 6788 6810 6453 6773 6803 6444 6762
kg 3096 2937 3079 3089 2927 3072 3086 2923 3067
256C
lb 6825 6475 6788 6810 6453 6773 6803 6444 6762
Operating weight kg 3349 3382 3365 3362 3397 3378 3374 3411 3392
246C
lb 7383 7456 7419 7412 7489 7447 7438 7520 7478
kg 3434 3467 3451 3447 3483 3464 3460 3497 3478
256C
lb 7571 7643 7608 7599 7679 7637 7628 7710 7668

3-22 Edition 40
 Performance Data Skid Steer Loaders
● 246C/256C

Bucket Type High Capacity — GP Multi-Purpose

Bucket Width 2134 mm (84") 1680 mm (66") 1830 mm (72")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 292-9271 296-8192 296-8191 279-5390 279-5391 279-5392 273-5398 273-5399 273-5400
Rated bucket capacity m3 0.63 0.63 0.63 0.33 0.34 0.33 0.37 0.38 0.37
yd3 0.82 0.82 0.82 0.43 0.44 0.43 0.48 0.50 0.48
Struck capacity m3 0.59 0.59 0.59 0.24 0.24 0.24 0.26 0.26 0.26
yd3 0.77 0.77 0.77 0.31 0.31 0.31 0.34 0.34 0.34
Width mm 2187 2198 2187 1730 1740 1730 1883 1883 1883
in 86.1 86.5 86.1 68.1 68.5 68.1 74.1 74.1 74.1
Dump clearance at maximum lift/dump mm * * * 2396 2382 2347 2396 2382 2347
in * * * 94.3 93.8 92.4 94.3 93.8 92.4
Reach at maximum lift/dump mm * * * 629 643 678 629 643 678
in * * * 24.8 25.3 26.7 24.8 25.3 26.7
Floor angle at maximum lift/dump degrees * * * 40.1° 40.1° 40.1° 40.1° 40.1° 40.1°
Floor angle at maximum lift/rack back degrees * * * 94.8° 94.8° 94.8° 94.8° 94.8° 94.8°
Clearance at maximum lift/level bucket mm * * * 2925 2908 2925 2925 2908 2925
in * * * 115.2 114.5 115.2 115.2 114.5 115.2
Hinge pin height at maximum lift mm * * * 3122 3122 3122 3122 3122 3122
in * * * 122.9 122.9 122.9 122.9 122.9 122.9
Maximum overall height mm * * * 4055 4083 4153 4055 4083 4153
in * * * 159.6 160.7 163.5 159.6 160.7 163.5
Reach at level lift arm/bucket mm * * * 1448 1476 1546 1448 1476 1546
in * * * 57.0 58.1 60.9 57.0 58.1 60.9
Maximum floor angle at minimum lift degrees 26° 26° 26° 26.1° 26.1° 26.1° 26.1° 26.1° 26.1°
Dig depth with level bucket mm * * * 16 33 16 16 33 16
in * * * 0.6 1.3 0.6 0.6 1.3 0.6
Overall length with bucket on ground mm * * * 3749 3777 3847 3749 3777 3847
in * * * 147.6 148.7 151.5 147.6 148.7 151.5
Front clearance circle radius (with bucket) mm * * * 2466 2480 2202 2466 2480 2202
in * * * 97.1 97.6 86.7 97.1 97.6 86.7
Tipping load kg 1831 1766 1877 1759 1704 1740 1740 1682 1720
246C
lb 4037 3893 4138 3878 3757 3836 3836 3708 3792
kg 1931 1865 1907 1861 1805 1842 1842 1783 1822
256C
lb 4257 4112 4204 4103 3979 4061 4061 3931 4017
Breakout force — lift kg 2518 2450 2501 2539 2477 2523 2523 2459 2507
246C
lb 5551 5401 5514 5598 5461 5562 5562 5421 5527
kg 2518 2450 2501 2539 2477 2523 2523 2459 2507
256C
lb 5551 5401 5514 5598 5461 5562 5562 5421 5527
Breakout force — tilt kg 2742 2602 2724 3007 2851 2989 2997 2841 2982
246C
lb 6045 5732 6005 6629 6285 6590 6607 6263 6574
kg 2742 2602 2724 3007 2851 2989 2997 2841 2982
256C
lb 6045 5732 6005 6629 6285 6590 6607 6263 6574
Operating weight kg 3429 3471 3447 3482 3515 3498 3502 3538 3518
246C
lb 7560 7652 7599 7676 7749 7712 7721 7800 7756
kg 3512 3554 3530 3568 3601 3584 3587 3623 3604
256C
lb 7742 7835 7782 7866 7939 7901 7908 7987 7945
*Information not available at time of printing.

Edition 40 3-23
Skid Steer Loaders Performance Data
● 246C/256C

Bucket Type Multi-Purpose Dirt

Bucket Width 1981 mm (78") 1680 mm (66") 1830 mm (72") 1981 mm (78")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 12 x 16.5
Holes Bolt-on Bolt-on Holes Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Only Edge Only Edge
Bucket Assembly No. 273-5403 279-5402 279-5401 279-5440 279-5441 285-6089 285-6090 268-4084 268-4083
Rated bucket capacity m3 0.40 0.42 0.40 0.37 0.38 0.40 0.42 0.44 0.45
yd3 0.52 0.55 0.52 0.48 0.50 0.52 0.55 0.58 0.59
Struck capacity m3 0.28 0.28 0.28 0.27 0.27 0.29 0.3 0.32 0.32
yd3 0.37 0.37 0.37 0.35 0.35 0.38 0.39 0.42 0.42
Width mm 2035 2045 2035 1676 1686 1829 1839 1981 1991
in 80.1 80.5 80.1 66.0 66.4 72.0 72.4 78.0 78.4
Dump clearance at maximum lift/dump mm 2396 2382 2347 2425 2394 2425 2394 2425 2394
in 94.3 93.8 92.4 95.5 94.3 95.5 94.3 95.5 94.3
Reach at maximum lift/dump mm 629 643 678 600 613 600 613 600 613
in 24.8 25.3 26.7 23.6 24.1 23.6 24.1 23.6 24.1
Floor angle at maximum lift/dump degrees 40.1° 40.1° 40.1° 39.8° 39.8° 39.8° 39.8° 39.8° 39.8°
Floor angle at maximum lift/rack back degrees 94.8° 94.8° 94.8° 95.2° 95.2° 95.2° 95.2° 95.2° 95.2°
Clearance at maximum lift/level bucket mm 2925 2908 2925 2930 2914 2930 2914 2930 2914
in 115.2 114.5 115.2 115.4 114.7 115.4 114.7 115.4 114.7
Hinge pin height at maximum lift mm 3122 3122 3122 3122 3122 3122 3122 3122 3122
in 122.9 122.9 122.9 122.9 122.9 122.9 122.9 122.9 122.9
Maximum overall height mm 4055 4083 4153 3998 4026 3998 4026 3998 4026
in 159.6 160.7 163.5 157.4 158.5 157.4 158.5 157.4 158.5
Reach at level lift arm/bucket mm 1448 1476 1546 1388 1416 1388 1416 1388 1416
in 57.0 58.1 60.9 54.6 55.7 54.6 55.7 54.6 55.7
Maximum floor angle at minimum lift degrees 26.1° 26.1° 26.1° 26.2° 26.2° 26.2° 26.2° 26.2° 26.2°
Dig depth with level bucket mm 16 33 16 10 26 10 26 10 26
in 0.6 1.3 0.6 0.4 1.0 0.4 1.0 0.4 1.0
Overall length with bucket on ground mm 3749 3777 3847 3692 3720 3692 3720 3692 3720
in 147.6 148.7 151.5 145.4 146.5 145.4 146.5 145.4 146.5
Front clearance circle radius (with bucket) mm 2466 2480 2202 2433 2447 2433 2447 2433 2447
in 97.1 97.6 86.7 95.8 96.3 95.8 96.3 95.8 96.3
Tipping load kg 1731 1669 1707 1986 1921 1973 1905 1962 1889
246C
lb 3816 3680 3763 4378 4235 4350 4200 4325 4165
kg 1833 1770 1809 2091 2026 2079 2009 2067 1994
256C
lb 4041 3902 3988 4610 4467 4583 4429 4557 4396
Breakout force — lift kg 2507 2443 2490 2722 2657 2711 2644 2701 2630
246C
lb 5527 5386 5489 6001 5858 5977 5829 5955 5798
kg 2507 2443 2490 2722 2657 2711 2644 2701 2630
256C
lb 5527 5386 5489 6001 5858 5977 5829 5955 5798
Breakout force — tilt kg 2989 2830 2969 3324 3144 3317 3134 3314 3129
246C
lb 6590 6239 6545 7328 6931 7313 6909 7306 6898
kg 2989 2830 2969 3324 3144 3317 3134 3314 3129
256C
lb 6590 6239 6545 7328 6931 7313 6909 7306 6898
Operating weight kg 3521 3558 3539 3326 3359 3339 3375 3352 3392
246C
lb 7762 7844 7802 7333 7405 7361 7441 7390 7478
kg 3606 3643 3624 3412 3445 3425 3461 3438 3478
256C
lb 7950 8031 7990 7522 7595 7551 7630 7579 7668

3-24 Edition 40
 Performance Data Skid Steer Loaders
● 246C/256C

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Carriage Assembly No. 293-9427 293-9428 293-9429
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 106 106 106
in 4.2 4.2 4.2
Carriage height above blade top mm 930 930 930
in 36.6 36.6 36.6
Blade surface height at maximum height mm 3015 3015 3015
in 118.7 118.7 118.7
Shank front face reach at maximum height mm 375 375 375
in 14.8 14.8 14.8
Blade surface height at level lift arms mm 1535 1535 1535
in 60.4 60.4 60.4
Shank front face reach at level lift arms mm 840 840 840
in 33.1 33.1 33.1
Blade surface height at minimum lift mm 90 90 90
in 3.5 3.5 3.5
Shank front face reach at minimum lift mm 410 410 410
in 16.1 16.1 16.1
Overall length at minimum lift, level tine mm 4065 4065 4065
in 160.0 160.0 160.0
Tipping load kg 1527 1450 1382
246C
lb 3366 3197 3047
kg 1609 1528 1458
256C
lb 3547 3369 3214
Operating weight kg 3169 3179 3188
246C
lb 6986 7008 7028
kg 3400 3410 3420
256C
lb 7496 7518 7540

Edition 40 3-25
Skid Steer Loaders Performance Data
● 262C

Bucket Type General Purpose

Bucket Width 1680 mm (66") 1830 mm (72") 1981 mm (78")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 279-5368 279-5369 279-5370 279-5372 279-5373 279-5374 279-5376 279-5377 279-5378
Rated bucket capacity m3 0.37 0.38 0.39 0.40 0.42 0.44 0.44 0.45 0.46
yd3 0.48 0.50 0.51 0.52 0.55 0.58 0.58 0.59 0.60
Struck capacity m3 0.27 0.27 0.27 0.29 0.30 0.31 0.32 0.32 0.32
yd3 0.35 0.35 0.35 0.38 0.39 0.41 0.42 0.42 0.42
Width mm 1730 1740 1730 1883 1893 1883 2035 2045 2035
in 68.1 68.5 68.1 74.1 74.5 74.1 80.1 80.5 80.1
Dump clearance at maximum lift/dump mm 2425 2411 2376 2425 2411 2376 2425 2411 2376
in 95.5 94.9 93.5 95.5 94.9 93.5 95.5 94.9 93.5
Reach at maximum lift/dump mm 826 840 875 826 840 875 826 840 875
in 32.5 33.1 34.4 32.5 33.1 34.4 32.5 33.1 34.4
Floor angle at maximum lift/dump degrees 39.2° 39.2° 39.2° 39.2° 39.2° 39.2° 39.2° 39.2° 39.2°
Floor angle at maximum lift/rack back degrees 84.9° 84.9° 84.9° 84.9° 84.9° 84.9° 84.9° 84.9° 84.9°
Clearance at maximum lift/level bucket mm 3043 3043 3043 3043 3043 3043 3043 3043 3043
in 119.8 119.8 119.8 119.8 119.8 119.8 119.8 119.8 119.8
Hinge pin height at maximum lift mm 3233 3233 3233 3233 3233 3233 3233 3233 3233
in 127.3 127.3 127.3 127.3 127.3 127.3 127.3 127.3 127.3
Maximum overall height mm 4075 4089 4124 4075 4089 4124 4075 4089 4124
in 160.4 161.0 162.4 160.4 161.0 162.4 160.4 161.0 162.4
Reach at level lift arm/bucket mm 1301 1329 1399 1301 1329 1399 1301 1329 1399
in 51.2 52.3 55.1 51.2 52.3 55.1 51.2 52.3 55.1
Maximum floor angle at minimum lift degrees 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 11 27 11 11 27 11 11 27 11
in 0.4 1.1 0.4 0.4 1.1 0.4 0.4 1.1 0.4
Overall length with bucket on ground mm 3692 3720 3790 3692 3720 3790 3692 3720 3790
in 145.4 146.5 149.2 145.4 146.5 149.2 145.4 146.5 149.2
Front clearance circle radius (with bucket) mm 2485 2517 2566 2518 2549 2598 2552 2583 2631
in 97.8 99.1 101.0 99.1 100.4 102.3 100.5 101.7 103.6
Tipping load kg 2400 2337 2378 2387 2320 2364 2372 2305 2349
lb 5291 5152 5243 5262 5115 5212 5229 5082 5179
Breakout force — lift kg 2430 2372 2414 2419 2359 2403 2409 2348 2391
lb 5357 5229 5322 5333 5201 5298 5311 5176 5271
Breakout force — tilt kg 3096 2936 3079 3089 2927 3072 3086 2923 3067
lb 6825 6473 6788 6810 6453 6773 6803 6444 6762
Operating weight kg 3619 3652 3635 3632 3667 3648 3645 3682 3663
lb 7978 8051 8014 8007 8084 8042 8036 8117 8076

3-26 Edition 40
 Performance Data Skid Steer Loaders
● 262C

Bucket Type High Capacity — GP Multi-Purpose

Bucket Width 2134 mm (84") 1680 mm (66") 1830 mm (72")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 292-9271 296-8192 296-8191 279-5390 279-5391 279-5392 279-5398 279-5399 279-5400
Rated bucket capacity m3 0.63 0.63 0.63 0.33 0.34 0.33 0.37 0.38 0.37
yd3 0.82 0.82 0.82 0.43 0.44 0.43 0.48 0.50 0.48
Struck capacity m3 0.59 0.59 0.59 0.24 0.24 0.24 0.26 0.26 0.26
yd3 0.77 0.77 0.77 0.31 0.31 0.31 0.34 0.34 0.34
Width mm 2187 2198 2187 1730 1740 1730 1883 1893 1883
in 86.1 86.5 86.1 68.1 68.5 68.1 74.1 74.5 74.1
Dump clearance at maximum lift/dump mm * * * 2421 2407 2372 2421 2407 2372
in * * * 95.3 94.8 93.4 95.3 94.8 93.4
Reach at maximum lift/dump mm * * * 810 824 859 810 824 859
in * * * 31.9 32.4 33.8 31.9 32.4 33.8
Floor angle at maximum lift/dump degrees * * * 40.1° 40.1° 40.1° 40.1° 40.1° 40.1°
Floor angle at maximum lift/rack back degrees * * * 94.8° 94.8° 94.8° 94.8° 94.8° 94.8°
Clearance at maximum lift/level bucket mm * * * 3036 3015 3036 3036 3015 3036
in * * * 119.5 118.7 119.5 119.5 118.7 119.5
Hinge pin height at maximum lift mm * * * 3233 3233 3233 3233 3233 3233
in * * * 127.3 127.3 127.3 127.3 127.3 127.3
Maximum overall height mm * * * 4105 4130 4200 4105 4130 4200
in * * * 161.6 162.6 165.4 161.6 162.6 165.4
Reach at level lift arm/bucket mm * * * 1343 1357 1343 1343 1357 1343
in * * * 52.9 53.4 52.9 52.9 53.4 52.9
Maximum floor angle at minimum lift degrees 26° 26° 26° 26.1° 26.1° 26.1° 26.1° 26.1° 26.1°
Dig depth with level bucket mm * * * 16 33 16 16 33 16
in * * * 0.6 1.3 0.6 0.6 1.3 0.6
Overall length with bucket on ground mm * * * 3749 3777 3847 3749 3777 3847
in * * * 147.6 148.7 151.5 147.6 148.7 151.5
Front clearance circle radius (with bucket) mm * * * 2518 2528 2616 2515 2528 2616
in * * * 99.1 99.5 103.0 99.0 99.5 103.0
Tipping load kg 2302 2235 2279 2242 2183 2223 2223 2160 2203
lb 5075 4927 5024 4943 4813 4901 4901 4762 4857
Breakout force — lift kg 2311 2247 2293 2314 2257 2298 2298 2239 2282
lb 5095 4954 5055 5101 4976 5066 5066 4936 5031
Breakout force — tilt kg 2743 2603 2725 3006 2851 2989 2997 2841 2981
lb 6047 5739 6008 6627 6285 6590 6607 6263 6572
Operating weight kg 3681 3723 3699 3753 3785 3769 3772 3808 3789
lb 8115 8207 8155 8274 8344 8309 8316 8395 8353
*Information not available at time of printing.

Edition 40 3-27
Skid Steer Loaders Performance Data
● 262C

Bucket Type Multi-Purpose Dirt

Bucket Width 1981 mm (78") 1680 mm (66") 1830 mm (72") 1981 mm (78")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 12 x 16.5
Holes Bolt-on Bolt-on Holes Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Only Edge Only Edge
Bucket Assembly No. 279-5403 279-5402 279-5401 279-5440 279-5441 285-6089 285-6090 268-4084 268-4083
Rated bucket capacity m3 0.40 0.42 0.40 0.37 0.38 0.40 0.42 0.44 0.45
yd3 0.52 0.55 0.52 0.48 0.50 0.52 0.55 0.58 0.59
Struck capacity m3 0.28 0.28 0.28 0.27 0.27 0.29 0.30 0.32 0.32
yd3 0.37 0.37 0.37 0.35 0.35 0.38 0.39 0.42 0.42
Width mm 2035 2045 2035 1676 1686 1829 1839 1981 1991
in 80.1 80.5 80.1 66.0 66.4 72.0 72.4 78.0 78.4
Dump clearance at maximum lift/dump mm 2421 2407 2372 2450 2436 2450 2436 2450 2436
in 95.3 94.8 93.4 96.5 95.9 96.5 95.9 96.5 95.9
Reach at maximum lift/dump mm 810 824 859 781 795 781 795 781 795
in 31.9 32.4 33.8 30.7 31.3 30.7 31.3 30.7 31.3
Floor angle at maximum lift/dump degrees 40.1° 40.1° 40.1° 39.2° 39.2° 39.2° 39.2° 39.2° 39.2°
Floor angle at maximum lift/rack back degrees 94.8° 94.8° 94.8° 84.9° 84.9° 84.9° 84.9° 84.9° 84.9°
Clearance at maximum lift/level bucket mm 3036 3015 3036 3043 3043 3043 3043 3043 3043
in 119.5 118.7 119.5 119.8 119.8 119.8 119.8 119.8 119.8
Hinge pin height at maximum lift mm 3233 3233 3233 3233 3233 3233 3233 3233 3233
in 127.3 127.3 127.3 127.3 127.3 127.3 127.3 127.3 127.3
Maximum overall height mm 4105 4130 4200 4075 4089 4075 4089 4075 4089
in 161.6 162.6 165.4 160.4 161.0 160.4 161.0 160.4 161.0
Reach at level lift arm/bucket mm 1343 1357 1343 1263 1292 1263 1292 1263 1292
in 52.9 53.4 52.9 49.7 50.9 49.7 50.9 49.7 50.9
Maximum floor angle at minimum lift degrees 26.1° 26.1° 26.1° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 16 33 16 11 27 11 27 11 27
in 0.6 1.3 0.6 0.4 1.1 0.4 1.1 0.4 1.1
Overall length with bucket on ground mm 3749 3777 3847 3692 3720 3692 3720 3692 3720
in 147.6 148.7 151.5 145.4 146.5 145.4 146.5 145.4 146.5
Front clearance circle radius (with bucket) mm 2518 2528 2616 2485 2517 2518 2549 2552 2583
in 99.1 99.5 103.0 97.8 99.1 99.1 100.4 100.5 101.7
Tipping load kg 2217 2150 2193 2491 2420 2479 2403 2467 2388
lb 4888 4740 4835 5492 5335 5465 5298 5439 5265
Breakout force — lift kg 2282 2222 2264 2490 2431 2478 2417 2467 2388
lb 5031 4899 4991 5489 5359 5463 5329 5439 5265
Breakout force — tilt kg 2988 2830 2969 3324 3144 3317 3134 3314 3129
lb 6587 6239 6545 7328 6931 7313 6909 7306 6898
Operating weight kg 3791 3838 3809 3596 3629 3610 3645 3623 3663
lb 8358 8461 8397 7928 8001 7959 8036 7987 8076

3-28 Edition 40
 Performance Data Skid Steer Loaders
● 262C

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Carriage Assembly No. 293-9427 293-9428 293-9429
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 106 106 106
in 4.2 4.2 4.2
Carriage height above blade top mm 930 930 930
in 36.6 36.6 36.6
Blade surface height at maximum height mm 3130 3130 3130
in 123.2 123.2 123.2
Shank front face reach at maximum height mm 697 697 697
in 27.4 27.4 27.4
Blade surface height at level lift arms mm 1608 1608 1608
in 63.3 63.3 63.3
Shank front face reach at level lift arms mm 738 738 738
in 29.1 29.1 29.1
Blade surface height at minimum lift mm 90 90 90
in 3.5 3.5 3.5
Shank front face reach at minimum lift mm 410 410 410
in 16.1 16.1 16.1
Overall length at minimum lift, level tine mm 4065 4065 4065
in 160.0 160.0 160.0
Tipping load kg 1896 1798 1714
lb 4180 3964 3779
Operating weight kg 3585 3595 3604
lb 7904 7926 7945

Edition 40 3-29
Skid Steer Loaders Performance Data
● 272C

Bucket Type General Purpose

Bucket Width 1680 mm (66") 1830 mm (72") 1981 mm (78")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 279-5368 279-5369 279-5370 279-5372 279-5373 279-5374 279-5376 279-5377 279-5378
Rated bucket capacity m3 0.37 0.38 0.39 0.4 0.42 0.44 0.44 0.45 0.46
yd3 0.48 0.50 0.51 0.52 0.55 0.58 0.58 0.59 0.60
Struck capacity m3 0.27 0.27 0.27 0.29 0.31 0.31 0.32 0.32 0.32
yd3 0.35 0.35 0.35 0.38 0.41 0.41 0.42 0.42 0.42
Width mm 1730 1740 1730 1883 1893 1883 2035 2045 2035
in 68.1 68.5 68.1 74.1 74.5 74.1 80.1 80.5 80.1
Dump clearance at maximum lift/dump mm 2487 2473 2438 2487 2473 2438 2487 2473 2438
in 97.9 97.4 96.0 97.9 97.4 96.0 97.9 97.4 96.0
Reach at maximum lift/dump mm 764 778 813 764 778 813 764 778 813
in 30.1 30.6 32.0 30.1 30.6 32.0 30.1 30.6 32.0
Floor angle at maximum lift/dump degrees 40° 40° 40° 40° 40° 40° 40° 40° 40°
Floor angle at maximum lift/rack back degrees 85° 85° 85° 85° 85° 85° 85° 85° 85°
Clearance at maximum lift/level bucket mm 3086 3069 3086 3086 3069 3086 3086 3086 3086
in 121.5 120.8 121.5 121.5 120.8 121.5 121.5 121.5 121.5
Hinge pin height at maximum lift mm 3279 3279 3279 3279 3279 3279 3279 3279 3279
in 129.1 129.1 129.1 129.1 129.1 129.1 129.1 129.1 129.1
Maximum overall height mm 4115 4140 4200 4115 4140 4200 4115 4140 4200
in 162.0 163.0 165.4 162.0 163.0 165.4 162.0 163.0 165.4
Reach at level lift arm/bucket mm 1323 1333 1323 1323 1333 1323 1323 1333 1323
in 52.1 52.5 52.1 52.1 52.5 52.1 52.1 52.5 52.1
Maximum floor angle at minimum lift degrees 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 14 30 14 14 30 14 14 30 14
in 0.6 1.2 0.6 0.6 1.2 0.6 0.6 1.2 0.6
Overall length with bucket on ground mm 3833 3861 3931 3833 3861 3931 3833 3861 3931
in 150.9 152.0 154.8 150.9 152.0 154.8 150.9 152.0 154.8
Front clearance circle radius (with bucket) mm 2520 2541 2576 2553 2574 2609 2577 2610 2645
in 99.2 100.0 101.4 100.5 101.3 102.7 101.5 102.8 104.1
Tipping load kg 2848 2782 2826 2835 2764 2812 2820 2749 2796
lb 6279 6133 6230 6250 6094 6199 6217 6060 6164
Breakout force — lift kg 2296 2241 2280 2285 2227 2269 2275 2216 2257
lb 5062 4941 5027 5038 4910 5002 5015 4885 4976
Breakout force — tilt kg 3096 2936 3079 3089 2927 3072 3086 2923 3067
lb 6825 6473 6788 6810 6453 6773 6803 6444 6762
Operating weight kg 3779 3812 3795 3792 3827 3808 3805 3842 3823
lb 8331 8404 8367 8360 8437 8395 8389 8470 8428

3-30 Edition 40
 Performance Data Skid Steer Loaders
● 272C

Bucket Type High Capacity — GP Multi-Purpose

Bucket Width 2134 mm (84") 1680 mm (66") 1830 mm (72")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge Teeth
Bucket Assembly No. 292-9271 296-8192 296-8191 279-5390 279-5391 279-5392 279-5398 279-5399 279-5400
Rated bucket capacity m3 0.63 0.63 0.63 0.33 0.34 0.33 0.37 0.38 0.37
yd3 0.82 0.82 0.82 0.43 0.44 0.43 0.48 0.50 0.48
Struck capacity m3 0.59 0.59 0.59 0.24 0.24 0.24 0.26 0.26 0.26
yd3 0.77 0.77 0.77 0.31 0.31 0.31 0.34 0.34 0.34
Width mm 2187 2198 2187 1730 1740 1730 1883 1893 1883
in 86.1 86.5 86.1 68.1 68.5 68.1 74.1 74.5 74.1
Dump clearance at maximum lift/dump mm * * * 2461 2446 2385 2461 2446 2385
in * * * 96.9 96.3 93.9 96.9 96.3 93.9
Reach at maximum lift/dump mm * * * 790 804 865 790 804 865
in * * * 31.1 31.7 34.1 31.1 31.7 34.1
Floor angle at maximum lift/dump degrees * * * 40° 40° 40° 40° 40° 40°
Floor angle at maximum lift/rack back degrees * * * 85° 85° 85° 85° 85° 85°
Clearance at maximum lift/level bucket mm * * * 3083 3066 3083 3083 3066 3083
in * * * 121.4 120.7 121.4 121.4 120.7 121.4
Hinge pin height at maximum lift mm * * * 3279 3279 3279 3279 3279 3279
in * * * 129.1 129.1 129.1 129.1 129.1 129.1
Maximum overall height mm * * * 4141 4166 4201 4141 4166 4201
in * * * 163.0 164.0 165.4 163.0 164.0 165.4
Reach at level lift arm/bucket mm * * * 1330 1358 1330 1330 1358 1330
in * * * 52.4 53.5 52.4 52.4 53.5 52.4
Maximum floor angle at minimum lift degrees 26° 26° 26° 26.1° 26.1° 26.1° 26.1° 26.1° 26.1°
Dig depth with level bucket mm * * * 18 34 18 18 34 18
in * * * 0.7 1.3 0.7 0.7 1.3 0.7
Overall length with bucket on ground mm * * * 3886 3914 3994 3886 3914 3994
in * * * 153.0 154.1 157.2 153.0 154.1 157.2
Front clearance circle radius (with bucket) mm * * * 2546 2567 2602 2579 2600 2635
in * * * 100.2 101.1 102.4 101.5 102.4 103.7
Tipping load kg 2721 2650 2697 2683 2620 2665 2664 2598 2644
lb 5999 5842 5946 5915 5776 2163 5873 5728 5829
Breakout force — lift kg 2183 2121 2165 2179 2126 2163 2163 2107 2148
lb 4813 4676 4773 4804 4687 4769 4769 4645 4736
Breakout force — tilt kg 2743 2603 2725 3006 2851 2989 2997 2841 2981
lb 6047 5739 6008 6627 6285 6590 6607 6263 6572
Operating weight kg 3828 3870 3846 3912 3945 3929 3932 3968 3949
lb 8439 8532 8478 8624 8697 8662 8669 8748 8706
*Information not available at time of printing.

Edition 40 3-31
Skid Steer Loaders Performance Data
● 272C

Bucket Type Multi-Purpose Dirt

Bucket Width 1981 mm (78") 1680 mm (66") 1830 mm (72") 1981 mm (78")
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5 12 x 16.5
Holes Bolt-on Bolt-on Holes Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Only Edge Only Edge
Bucket Assembly No. 279-5403 279-5402 279-5401 279-5440 279-5441 285-6089 285-6090 268-4084 268-4083
Rated bucket capacity m3 0.40 0.42 0.40 0.37 0.38 0.40 0.42 0.44 0.45
yd3 0.52 0.55 0.52 0.48 0.50 0.52 0.55 0.58 0.59
Struck capacity m3 0.28 0.28 0.28 0.27 0.27 0.29 0.30 0.32 0.32
yd3 0.37 0.37 0.37 0.35 0.35 0.38 0.39 0.42 0.42
Width mm 2035 2045 2035 1676 1686 1829 1839 1981 1991
in 80.1 80.5 80.1 66.0 66.4 72.0 72.4 78.0 78.4
Dump clearance at maximum lift/dump mm 2461 2446 2385 2487 2473 2487 2473 2487 2473
in 96.9 96.3 93.9 97.9 97.4 97.9 97.4 97.9 97.4
Reach at maximum lift/dump mm 790 804 865 764 778 764 778 764 778
in 31.1 31.7 34.1 30.1 30.6 30.1 30.6 30.1 30.6
Floor angle at maximum lift/dump degrees 40° 40° 40° 40° 40° 40° 40° 40° 40°
Floor angle at maximum lift/rack back degrees 85° 85° 85° 85° 85° 85° 85° 85° 85°
Clearance at maximum lift/level bucket mm 3083 3066 3083 3089 3072 3089 3072 3089 3072
in 121.4 120.7 121.4 121.6 120.9 121.6 120.9 121.6 120.9
Hinge pin height at maximum lift mm 3279 3279 3279 3279 3279 3279 3279 3279 3279
in 129.1 129.1 129.1 129.1 129.1 129.1 129.1 129.1 129.1
Maximum overall height mm 4141 4166 4201 4115 4140 4115 4140 4115 4140
in 163.0 164.0 165.4 162.0 163.0 162.0 163.0 162.0 163.0
Reach at level lift arm/bucket mm 1330 1358 1330 1251 1298 1251 1298 1251 1298
in 52.4 53.5 52.4 49.3 51.1 49.3 51.1 49.3 51.1
Maximum floor angle at minimum lift degrees 26.1° 26.1° 26.1° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 18 34 18 10 26 10 26 10 26
in 0.7 1.3 0.7 0.4 1.0 0.4 1.0 0.4 1.0
Overall length with bucket on ground mm 3886 3914 3994 3833 3861 3833 3861 3833 3861
in 153.0 154.1 157.2 150.9 152.0 150.9 152.0 150.9 152.0
Front clearance circle radius (with bucket) mm 2603 2636 2671 2520 2541 2553 2574 2577 2610
in 102.5 103.8 105.2 99.2 100.0 100.5 101.3 101.5 102.8
Tipping load kg 2660 2590 2636 2951 2875 2939 2859 2928 2844
lb 5864 5710 5811 6506 6338 6479 6303 6455 6270
Breakout force — lift kg 2148 2090 2130 2352 2295 2340 2281 2330 2268
lb 4736 4608 4696 5185 5060 5159 5029 5137 5000
Breakout force — tilt kg 2988 2830 2969 3034 2917 3024 2905 3017 2895
lb 6587 6239 6545 6689 6431 6667 6404 6651 6382
Operating weight kg 3951 3988 3969 3756 3789 3769 3805 3783 3823
lb 8710 8792 8750 8281 8353 8309 8389 8340 8428

3-32 Edition 40
 Performance Data Skid Steer Loaders
● 272C

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Tire Size 12 x 16.5 12 x 16.5 12 x 16.5
Carriage Assembly No. 293-9427 293-9428 293-9429
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 106 106 106
in 4.2 4.2 4.2
Carriage height above blade top mm 930 930 930
in 36.6 36.6 36.6
Blade surface height at maximum height mm 3130 3130 3130
in 123.2 123.2 123.2
Shank front face reach at maximum height mm 697 697 697
in 27.4 27.4 27.4
Blade surface height at level lift arms mm 1608 1608 1608
in 63.3 63.3 63.3
Shank front face reach at level lift arms mm 738 738 738
in 29.1 29.1 29.1
Blade surface height at minimum lift mm 90 90 90
in 3.5 3.5 3.5
Shank front face reach at minimum lift mm 410 410 410
in 16.1 16.1 16.1
Overall length at minimum lift, level tine mm 4186 4186 4186
in 164.8 164.8 164.8
Tipping load kg 2240 2127 2029
lb 4938 4689 4473
Operating weight kg 3745 3755 3764
lb 8256 8278 8298

Edition 40 3-33
Skid Steer Loaders Dimensions
● 216B2/226B2/232B2

MODEL 216B2 226B2 232B2

Rated operating capacity* 635 kg 1400 lb 680 kg 1500 lb 862 kg 1900 lb
A Height to top of ROPS 1950 mm 6'5" 1950 mm 6'5" 1953 mm 6'5"
B Length to coupler 2519 mm 8'3" 2519 mm 8'3" 2760 mm 9'1"
C Length with bucket on ground 3233 mm 10'7" 3233 mm 10'7" 3437 mm 11'3"
D Maximum overall height 3709 mm 12'2" 3709 mm 12'2" 3894 mm 12'9"
E Ground clearance 195 mm 8" 195 mm 8" 145 mm 5.7"
F Departure angle 26° 26° 28°
G Wheelbase 986 mm 3'3" 986 mm 3'3" 1094 mm 3'7"
H Bumper overhang from axle 967 mm 3'2" 967 mm 3'2" 989 mm 3'3"
Bucket overall width 1524 mm 5'2" 1524 mm 5'2" 1524 mm 5'2"
J Clearance at maximum lift/dump 2169 mm 7'1" 2169 mm 7'1" 2243 mm 7'3"
K Floor angle at maximum lift/dump 40° 40° 49.5°
L Floor angle at maximum lift/rack 96.7° 96.7° 86.9°
M Clearance at maximum lift/level 2661 mm 8'9" 2661 mm 8'9" 2851 mm 9'4"
N Hinge pin height at maximum lift 2854 mm 9'4" 2854 mm 9'4" 3013 mm 9'11"
O Reach at level lift arm/bucket 1280 mm 4'2" 1280 mm 4'2" 1231 mm 4'1"
Hinge pin height at carry position 239 mm 9.3" 239 mm 9.3" 247 mm 9.7"
Maximum floor angle
at carry position 27.7° 27.7° 28.1°
*SAE J818 MAY87, ISO 5998:1986.
NOTE: 216B2/226B2 machine dimensions shown with standard machine equipped with optional 10 x 16.5 10 PR tires and 1520 mm (60") dirt bucket.
232B2 machine dimensions shown with standard machine equipped with optional 10 x 16.5 x 8 PR tires and 1730 mm (66") dirt bucket.

3-34 Edition 40
 Dimensions Skid Steer Loaders
● 236B2/242B2/252B2

MODEL 236B2 242B2 252B2

Rated operating capacity* 884 kg 1950 lb 952 kg 2100 lb 1134 kg 2500 lb
A Height to top of ROPS 2092 mm 6'10" 1986 mm 6'6" 2063 mm 6'8"
B Length to coupler 2800 mm 9'2" 2760 mm 9'1" 2901 mm 9'5"
C Length with bucket on ground 3515 mm 11'6" 3437 mm 11'3" 3616 mm 11'9"
D Maximum overall height 3965 mm 13'0" 3926 mm 12'11" 4062 mm 13'4"
E Ground clearance 235 mm 9" 178 mm 7" 196 mm 8"
F Departure angle 28° 28° 27°
G Wheelbase 1134 mm 3'9" 1094 mm 3'7" 1228 mm 4'0"
H Bumper overhang from axle 1038 mm 3'5" 989 mm 3'3" 1043 mm 3'4"
Bucket overall width 1730 mm 5'8" 1524 mm 5'2" 1730 mm 5'8"
J Clearance at maximum lift/dump 2398 mm 7'10" 2270 mm 7'4" 2421 mm 8'0"
K Floor angle at maximum lift/dump 40° 49.5° 51°
L Floor angle at maximum lift/rack 97.4° 86.9° 87°
M Clearance at maximum lift/level 2908 mm 9'6" 2851 mm 9'4" 3039 mm 10'0"
N Hinge pin height at maximum lift 3099 mm 10'2" 3046 mm 10'0" 3210 mm 10'6"
O Reach at level lift arm/bucket 1357 mm 4'5" 1231 mm 4'1" 1331 mm 4'4"
Hinge pin height at carry position 257 mm 10" 299 mm 11.8" 213 mm 8.4"
Maximum floor angle
at carry position 29.4° 28.1° 27°
*SAE J818 MAY87, ISO 5998:1986.
NOTE: 236B2/242B2/252B2 machine dimensions shown with standard machine equipped with optional 12 x 16.5 10 PR tires and 1730 mm (66") dirt bucket.

Edition 40 3-35
Skid Steer Loaders Dimensions
● 246C/256C/262C/272C

MODEL 246C 256C 262C 272C

Rated operating capacity* 975 kg 2150 lb 1066 kg 2352 lb 1225 kg 2700 lb 1474 kg 3250 lb
A Height to top of ROPS 2104 mm 6'11" 2104 mm 6'11" 2104 mm 6'11" 2104 mm 6'11"
B Length to coupler 2979 mm 9'9" 2979 mm 9'9" 2979 mm 9'9" 3120 mm 10'2"
C Length with bucket on ground 3692 mm 12'1" 3692 mm 12'1" 3692 mm 12'1" 3833 mm 12'7"
D Maximum overall height 3998 mm 13'1" 3998 mm 13'1" 4075 mm 13'4" 4115 mm 13'6"
E Ground clearance 225 mm 8.9" 225 mm 8.9" 225 mm 8.9" 225 mm 8.9"
F Departure angle 26° 26° 26° 26°
G Wheelbase 1240 mm 4'1" 1240 mm 4'1" 1240 mm 4'1" 1381 mm 4'6"
H Bumper overhang from axle 1089 mm 3'7" 1089 mm 3'7" 1089 mm 3'7" 1089 mm 3'7"
Bucket overall width 1677 mm 5'6" 1677 mm 5'6" 1829 mm 6'0" 1829 mm 6'0"
J Clearance at maximum lift/dump 2425 mm 7'11" 2425 mm 7'11" 2450 mm 8'0" 2487 mm 8'2"
K Floor angle at maximum lift/dump 40° 40° 50° 51°
L Floor angle at maximum lift/rack 85° 85° 85° 83°
M Clearance at maximum lift/level 2930 mm 9'7" 2930 mm 9'7" 3043 mm 10'0" 3088 mm 10'2"
N Hinge pin height at maximum lift 3122 mm 10'3" 3122 mm 10'3" 3233 mm 10'7" 3279 mm 10'9"
O Reach at level lift arm/bucket 1388 mm 4'7" 1388 mm 4'7" 1283 mm 4'3" 1270 mm 4'2"
Hinge pin height at carry position 200 mm 7.8" 200 mm 7.8" 200 mm 7.8" 200 mm 7.8"
Maximum floor angle
at carry position 26° 26° 26° 26°
*SAE J818 MAY87, ISO 5998:1986.
NOTE: 246C/256C machine dimensions shown with standard machine equipped with optional 12 x 16.5 10 PR tires and 1730 mm (66") dirt bucket.
262C/272C machine dimensions shown with standard machine equipped with optional 12 x 16.5 10 PR tires and 1829 mm (72") dirt bucket.

3-36 Edition 40
 Work Tool Compatibility Skid Steer Loaders
● 216B2/226B2/232B2/236B2/242B2/
252B2/246C/256C/262C/272C

CAT WORK TOOL COMPATIBILITY

216B2 226B2 232B2 236B2 242B2 252B2 246C 256C 262C 272C 3
General Purpose Buckets
1524 mm (60") O O A A A NR A A NR NR
1676 mm (66") A A O O O O O O A A
1829 mm (72") NR NR A O A O O O O O
1981 mm (78") NR NR NR A A O A A O O
High Capacity Bucket (GP)
2134 mm (84") NR NR NR A A O A A O O
Dirt Buckets
1524 mm (60") O O A A A NR A A NR NR
1676 mm (66") A A O O O O O O A A
1829 mm (72") NR NR A O A O O O O O
1981 mm (78") NR NR NR A A O A A O O
Utility Buckets
1524 mm (60") O O A A A NR A A NR NR
1676 mm (66") A A O O O O O O A A
1829 mm (72") NR NR A O A O O O O O
Light Material Buckets
1829 mm (72") O O O O O O O O O O
1981 mm (78") NR NR A A A O A A O O
2134 mm (84") NR NR NR A A O A A O O
2438 mm (96") NR NR NR NR NR A A A O O
Multi-Purpose Buckets
1524 mm (60") O O A A A NR A A NR NR
1676 mm (66") A A O O O O O O A A
1829 mm (72") NR NR A O A O O O O O
1981 mm (78") NR NR NR A NR A A A O O
2134 mm (84") NR NR NR A NR O A A O O
Industrial Grapple Buckets
1524 mm (60") O O A A A NR A A NR NR
1676 mm (66") A A O O O O O O A A
1829 mm (72") NR NR A O A O O O O O
1981 mm (78") NR NR NR A NR A A A O O
Industrial Grapple Forks
1676 mm (66") O O O O O O O O O O
1829 mm (72") NR NR A O A O O O O O
Industrial Grapple Rakes
1829 mm (72") O O O O O O O O O O
2134 mm (84") NR NR NR A NR O O O O O
Utility Grapple Buckets
1524 mm (60") O O A A A NR A A NR NR
1676 mm (66") O O O O O O O O A A
1829 mm (72") NR NR A O A O O O O O
O – Provides Optimum Performance.
A – Provides Acceptable Performance.
NR – Not Recommended.

Edition 40 3-37
Skid Steer Loaders Work Tool Compatibility
● 216B2/226B2/232B2/236B2/242B2/
252B2/246C/256C/262C/272C

CAT WORK TOOL COMPATIBILITY

216B2 226B2 232B2 236B2 242B2 252B2 246C 256C 262C 272C
Carriage O O O O O O O O O O
Pallet Forks
910 mm (36") Tines O O O O O O O O O O
1070 mm (42") Tines O O O O O O O O O O
1220 mm (48") Tines O O O O O O O O O O
Utility Grapple Forks
1676 mm (66") O O O O O O O O O O
1829 mm (72") NR NR A O A O O O O O
Utility Forks
1676 mm (66") O O O O O O O O O O
1829 mm (72") NR NR A O A O O O O O
Angle Blades
1829 mm (72") O O O A O A A A A A
2134 mm (84") A A A O A O O O O O
6 Way Blades
2000 mm (79") O O O A O A A A A A
2337 mm (92") A A A O O O O 0 O O
A14B Auger O O O O O O O O O O
A19B Auger A A A O A O O O O O
A26B Auger X A# X X A# X A# O# O# O#
Backhoe
BH150 O O O O O O X X X X
BH160 X X X X X X O O O O
BH27 O O O O O O X X X X
BH30 O O O O O O X X X X
BH30W X X X X X X O O O O
BR160 Brushcutter O O O O O O O O O O
BR166 Brushcutter O O O O O O O O O O
BR172 Brushcutter O O O O O O O O O O
BR272 Brushcutter X O# X X O# X X X X X
BR378 Brushcutter X X X X X X A# O# O# O#
BP15B Pickup Broom O! O O O O A O O A A
BP18B Pickup Broom X X O O O O O O O O
BA18 Angle Broom O O O O O O O O O O
BU115 Utility Broom O! O O O O A O O A A
BU118 Utility Broom X X O O O O O O O O
O – Provides Optimum Performance.
O# – The machine performance is optimum with the available HF/XPS option.
A – Provides Acceptable Performance.
A# – The machine performance is acceptable with the available HF/XPS option.
NR – Not Recommended.
X – Not Approved. Do Not Use.
! – Lift Restriction.

3-38 Edition 40
 Work Tool Compatibility Skid Steer Loaders
● 216B2/226B2/232B2/236B2/242B2/
252B2/246C/256C/262C/272C

CAT WORK TOOL COMPATIBILITY

216B2 226B2 232B2 236B2 242B2 252B2 246C 256C 262C 272C 3
PC203 Cold Planer O O O O O O O O O O
PC204 Cold Planer X A X O A O O O O O
PC205 Cold Planer X A# X X A# X A# O# O# O#
PC206 Cold Planer X A# X X A# X A# O# O# O#
PC210 Cold Planer X X X X X X A# O# O# O#
H55D S Hammer O O O O O O O O O O
H65D S Hammer O O O O O O O O O O
LR15B Landscape Rake O! O! O! O! O! O! O O O O
LR18B Landscape Rake X X X O! X O! O O O O
LT13B Landscape Tiller O O O O O O O O O O
LT18B Landscape Tiller X X X O X O O O O O
Material Handling Arm O O O O O O O O O O
HM312 Mulcher X X X X X X A# O# O# O#
HM315 Mulcher X X X X X X A# O# O# O#
PR172 Power Box Rake O O O A A A A A A A
PR184 Power Box Rake A O A O O O O O O O
PR190 Power Box Rake A A A O A O O O O O
SR117 Snowblower O O O NR O NR A A NR NR
SR118 Snowblower NR NR NR O NR O O O O O
SR121 Snowblower NR NR NR A NR A A A A A
SR318 Snowblower NR A# NR NR A# NR A# O# O# O#
SR321 Snowblower NR A# NR NR A# NR A# O# O# O#
SG16B Stump Grinder O O O O O O O O O O
SG18B Stump Grinder X A# X X A# X A# O# O# O#
T6B Trencher O O O O O O O O O O
T9B Trencher O O O O O O O O O O
T15 Trencher X A# X X A# X X O# O# O#
CV16B Vibratory Compactor O! O! O! O! O! O O O O O
CV18B Vibratory Compactor X X X X X O O O O O
SW45 Wheel Saw X X X X X X O#,C O#,C O#,C O#
SW60 Wheel Saw X X X X X X O#,C O#,C O#,C O#
O – Provides Optimum Performance.
O# – The machine performance is optimum with the available HF/XPS option.
A – Provides Acceptable Performance.
A# – The machine performance is acceptable with the available HF/XPS option.
NR – Not Recommended.
X – Not Approved. Do Not Use.
! – Lift Restriction.
C – Maximum Counterweights are Required.

Edition 40 3-39
Multi Terrain Loaders Specifications
● 247B2/257B2

MODEL 247B2 257B2

Flywheel Power: Net 42 kW 56 hp 42 kW 56 hp
Flywheel Power: Gross 46 kW 62 hp 46 kW 62 hp
Engine Model C2.2T C2.2T
Rated Engine RPM 3000 3000
Bore 84 mm 3.3" 84 mm 3.3"
Stroke 100 mm 3.9" 100 mm 3.9"
Displacement 2.2 L 134 in3 2.2 L 134 in3
No. Cylinders 4 4
One Speed Forward 0-11.3 km/h 0-7.0 mph 0-11.3 km/h 0-7.0 mph
One Speed Reverse 0-12.2 km/h 0-7.6 mph 0-11.4 km/h 0-7.1 mph
Hydraulic Cycle Time, Empty Bucket: Seconds Seconds
Raise 2.7 3.0
Dump 2.2 2.2
Lower (Empty, Float Down) 2.8 3.0
Total 7.7 8.2
Tread Width (per side) 381 mm 15" 381 mm 15"
Width Over Tracks 1676 mm 5'6" 1676 mm 5'6"
Ground Clearance 267 mm 10" 257 mm 10"
Fuel Tank Capacity 62 L 16.2 U.S. gal 84 L 22.2 U.S. gal
Hydraulic Tank Capacity 35 L 9.2 U.S. gal 35 L 9.2 U.S. gal
Hydraulic System Capacity (includes tank) 55 L 14.5 U.S. gal 55 L 14.5 U.S. gal
Hydraulic Pump Capacity 60 L/min 15.6 gpm 60 L/min 15.6 gpm

3-40 Edition 40
 Specifications Multi Terrain Loaders
● 277C/287C/297C

MODEL 277C 287C 297C

Flywheel Power: Net 61 kW 82 hp 61 kW 82 hp 67 kW 90 hp 3
Flywheel Power: Gross 63 kW 84 hp 63 kW 84 hp 70 kW 94 hp
Engine Model C3.4 DIT C3.4 DIT C3.4 DIT
Rated Engine RPM 2500 2500 2500
Bore 94 mm 3.7" 94 mm 3.7" 94 mm 3.7"
Stroke 120 mm 4.7" 120 mm 4.7" 120 mm 4.7"
Displacement 3.3 L 201 in3 3.3 L 201 in3 3.3 L 201 in3
No. Cylinders 4 4 4
One Speed Forward 0-9 km/h 0-5.6 mph 0-9 km/h 0-5.6 mph 0-9 km/h 0-5.6 mph
Two Speed Forward 0-14.9 km/h 0-9.2 mph 0-14.9 km/h 0-9.2 mph 0-14.9 km/h 0-9.2 mph
One Speed Reverse 0-9 km/h 0-5.6 mph 0-9 km/h 0-5.6 mph 0-9 km/h 0-5.6 mph
Two Speed Reverse 0-14.9 km/h 0-9.2 mph 0-14.9 km/h 0-9.2 mph 0-14.9 km/h 0-9.2 mph
Hydraulic Cycle Time, Empty Bucket: Seconds Seconds Seconds
Raise 3.1 4.7 4.7
Dump 2.5 2.5 2.5
Lower (Empty, Float Down) 4.0 4.6 4.6
Total 9.6 11.8 11.8
Tread Width (per side) 457 mm 18" 457 mm 18" 457 mm 18"
Width Over Tracks 1981 mm 78" 1981 mm 78" 1981 mm 78"
Ground Clearance 225 mm 8.9" 225 mm 8.9" 225 mm 8.9"
Fuel Tank Capacity 98 L 26 U.S. gal 98 L 26 U.S. gal 98 L 26 U.S. gal
Hydraulic Tank Capacity 42 L 11 U.S. gal 42 L 11 U.S. gal 42 L 11 U.S. gal
Hydraulic System Capacity
(includes tank) 57 L 15 U.S. gal 57 L 15 U.S. gal 57 L 15 U.S. gal
Hydraulic Pump Capacity 84 L/min 22 gpm 84 L/min 22 gpm 84 L/min 22 gpm

Edition 40 3-41
Multi Terrain Loaders Performance Data
● 247B2

Bucket Type General Purpose Multi-Purpose

Bucket Width 1680 mm (66") 1829 mm (72") 1680 mm (66")
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 165-6153 152-0226 152-0225 165-6154 152-0229 152-0228 154-5008 154-5047
Rated bucket capacity m3 0.40 0.40 0.41 0.44 0.44 0.45 0.33 0.33
yd3 0.52 0.52 0.53 0.57 0.57 0.59 0.43 0.43
Struck capacity m3 0.29 0.29 0.29 0.32 0.32 0.32 0.24 0.25
yd3 0.38 0.38 0.38 0.42 0.42 0.42 0.31 0.33
Width mm 1730 1740 1730 1883 1893 1883 1749 1749
in 68.0 68.0 68.0 74.0 75.0 74.0 69.0 69.0
Dump clearance at maximum lift/dump mm 2134 2101 2067 2134 2101 2067 2133 2103
in 84.0 82.7 81.4 84.0 82.7 81.4 84.0 82.8
Reach at maximum lift/dump mm 625 637 696 625 637 696 628 640
in 24.6 25.1 27.4 24.6 25.1 27.4 24.7 25.2
Floor angle at maximum lift/dump degrees 40.8° 40.8° 40.8° 40.8° 40.8° 40.8° 40.8° 40.8°
Floor angle at maximum lift/rack back degrees 95.7° 95.7° 95.7° 95.7° 95.7° 95.7° 95.6° 95.6°
Clearance at maximum lift/level bucket mm 2667 2651 2666 2667 2651 2666 2673 2653
in 105.0 104.4 105.0 105.0 104.4 105.0 105.2 104.4
Hinge pin height at maximum lift mm 2862 2862 2862 2862 2862 2862 2862 2862
in 112.7 112.7 112.7 112.7 112.7 112.7 112.7 112.7
Maximum overall height mm 3770 3799 3867 3770 3799 3867 3774 3804
in 148.4 149.6 152.2 148.4 149.6 152.2 148.6 149.8
Reach at level lift arm/bucket mm 1395 1423 1493 1395 1423 1493 1399 1427
in 54.9 56.0 58.8 54.9 56.0 58.8 55.1 56.2
Maximum floor angle at minimum lift degrees 25.4° 25.4° 25.4° 25.4° 25.4° 25.4° 25.3° 25.3°
Dig depth with level bucket mm 0 16 1 0 16 1 0 16
in 0.0 0.6 0.0 0.0 0.6 0.0 0.0 0.6
Overall length with bucket on ground mm 3285 3313 3382 3285 3313 3382 3289 3317
in 129.3 130.4 133.1 129.3 130.4 133.1 129.5 130.6
Front clearance circle radius (with bucket) mm 2157 2189 2223 2189 2221 2251 2142 2174
in 84.9 86.2 87.5 86.2 87.4 88.6 84.3 85.6
Tipping load kg 1811 1752 1715 1803 1740 1780 1663 1607
lb 3992 3863 1788 3975 3837 3925 3666 3542
Breakout force — lift kg 1408 1359 1392 1402 1350 1386 1298 1250
lb 3105 2996 3070 3091 2977 3056 2862 2755
Breakout force — tilt kg 1694 1590 1676 1689 1583 1673 1618 1517
lb 3734 3505 3696 3724 3491 3688 3567 3345
Operating weight kg 3169 3202 3185 3177 3212 3193 3302 3334
lb 6987 7060 7023 7004 7082 7040 7280 7352

3-42 Edition 40
 Performance Data Multi Terrain Loaders
● 247B2

Bucket Type Multi-Purpose Dirt

Bucket Width 1680 mm 1829 mm 1680 mm 1829 mm
(66") (72") (66") (72") 3
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge Only Edge
Bucket Assembly No. 154-5048 154-5010 154-5049 154-5050 165-6157 152-0232 188-3526 188-2719
Rated bucket capacity m3 0.34 0.37 0.37 0.37 0.37 0.38 0.41 0.42
yd3 0.44 0.48 0.48 0.48 0.48 0.49 0.54 0.55
Struck capacity m3 0.24 0.27 0.28 0.27 0.27 0.27 0.29 0.31
yd3 0.31 0.35 0.36 0.35 0.35 0.35 0.38 0.41
Width mm 1749 1902 1902 1902 1730 1740 1883 1893
in 69.0 75.0 75.0 75.0 68.0 69.0 74.0 75.0
Dump clearance at maximum lift/dump mm 2066 2133 2103 2066 2167 2138 2167 2138
in 81.3 84.0 82.8 81.3 85.3 84.2 85.3 84.2
Reach at maximum lift/dump mm 702 628 640 702 584 596 584 596
in 27.6 24.7 25.2 27.6 23.0 23.5 23.0 23.5
Floor angle at maximum lift/dump degrees 40.8° 40.8° 40.8° 40.8° 40.8° 40.8° 40.8° 40.8°
Floor angle at maximum lift/rack back degrees 95.6° 95.6° 95.6° 95.6° 95.7° 95.7° 95.7° 95.7°
Clearance at maximum lift/level bucket mm 2668 2673 2653 2668 2667 2651 2667 2651
in 105.0 105.2 104.4 105.0 105.0 104.4 105.0 104.4
Hinge pin height at maximum lift mm 2862 2862 2862 2862 2862 2862 2862 2862
in 112.7 112.7 112.7 112.7 112.7 112.7 112.7 112.7
Maximum overall height mm 3872 3774 3804 3872 3717 3746 3717 3746
in 152.4 148.6 149.8 152.4 146.3 147.5 146.3 147.5
Reach at level lift arm/bucket mm 1497 1399 1427 1497 1342 1370 1342 1370
in 58.9 55.1 56.2 58.9 52.8 53.9 52.8 53.9
Maximum floor angle at minimum lift degrees 25.3° 25.3° 25.3° 25.3° 25.4° 25.4° 25.4° 25.4°
Dig depth with level bucket mm 1 0 16 1 0 13 0 13
in 0.0 0.0 0.6 0.0 0.0 0.5 0.0 0.5
Overall length with bucket on ground mm 3386 3289 3317 3386 3232 3260 3233 3261
in 133.3 129.5 130.6 133.3 127.2 128.3 127.3 128.4
Front clearance circle radius (with bucket) mm 2208 2152 2183 2213 2097 2128 2110 2141
in 86.9 84.7 85.9 87.1 82.6 83.8 83.1 84.3
Tipping load kg 1643 1645 1586 1625 1913 1849 1906 1838
lb 3623 3628 3497 3584 4219 4077 4203 4052
Breakout force — lift kg 1282 1283 1233 1267 1478 1428 1472 1419
lb 2826 2829 2718 2794 3260 3148 3246 3128
Breakout force — tilt kg 1600 1609 1508 1594 1842 1726 1838 1720
lb 3528 3548 3326 3514 4061 3806 4052 3792
Operating weight kg 3318 3320 3356 3337 3119 3151 3126 3162
lb 7316 7321 7400 7357 6876 6949 6893 6972

Edition 40 3-43
Multi Terrain Loaders Performance Data
● 247B2

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
Carriage Assembly No. 242-9998 242-9999 243-0000
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 108 108 108
in 4.3 4.3 4.3
Carriage height above blade top mm 923.5 923.5 923.5
in 36.4 36.4 36.4
Blade surface height at maximum height mm 2754 2754 2754
in 108.4 108.4 108.4
Shank front face reach at maximum height mm 373 373 373
in 14.7 14.7 14.7
Blade surface height at level lift arms mm 1419 1419 1419
in 55.9 55.9 55.9
Shank front face reach at level lift arms mm 802 802 802
in 31.6 31.6 31.6
Blade surface height at minimum lift mm 106 106 106
in 4.2 4.2 4.2
Shank front face reach at minimum lift mm 392 392 392
in 15.4 15.4 15.4
Overall length at minimum lift, level tine mm 3601 3761 3911
in 142.0 148.0 154.0
Tipping load kg 1542 1436 1349
lb 3400 3167 2975
Operating weight kg 3134 3145 3154
lb 6911 6934 6955

3-44 Edition 40
 Performance Data Multi Terrain Loaders
● 257B2/257B2 HF

Bucket Type General Purpose Multi-Purpose

Bucket Width 1680 mm (66") 1829 mm (72") 1680 mm (66")
3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 165-6153 152-0226 152-0225 165-6154 152-0229 152-0228 154-5008 154-5047
Rated bucket capacity m3 0.40 0.40 0.41 0.44 0.44 0.45 0.33 0.33
yd3 0.52 0.52 0.53 0.57 0.57 0.59 0.43 0.43
Struck capacity m3 0.29 0.29 0.29 0.32 0.32 0.32 0.24 0.25
yd3 0.38 0.38 0.38 0.42 0.42 0.42 0.31 0.33
Width mm 1730 1740 1730 1883 1893 1883 1749 1749
in 68.0 68.0 68.0 74.0 75.0 74.0 69.0 69.0
Dump clearance at maximum lift/dump mm 2278 2275 2201 2275 2244 2205 2274 2242
in 89.7 89.6 86.7 89.6 88.3 86.8 89.5 88.3
Reach at maximum lift/dump mm 790 797 853 790 798 854 793 801
in 31.1 31.4 33.6 31.1 31.4 33.6 31.2 31.5
Floor angle at maximum lift/dump degrees 40.5° 40.5° 40.5° 40.5° 40.5° 40.5° 40.5° 40.5°
Floor angle at maximum lift/rack back degrees 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9°
Clearance at maximum lift/level bucket mm 2889 2870 2885 2885 2870 2885 2887 2871
in 113.7 113.0 113.6 113.6 113.0 113.6 113.7 113.0
Hinge pin height at maximum lift mm 3081 3081 3081 3081 3081 3081 3081 3081
in 121.3 121.3 121.3 121.3 121.3 121.3 121.3 121.3
Maximum overall height mm 3963 3990 4060 3963 3990 4060 3966 3994
in 156.0 157.1 159.8 156.0 157.1 159.8 156.1 157.2
Reach at level lift arm/bucket mm 1387 1415 1484 1388 1416 1486 1391 1419
in 54.6 55.7 58.4 54.6 55.7 58.5 54.8 55.9
Maximum floor angle at minimum lift degrees 25.4° 25.4° 25.4° 25.4° 25.4° 25.4° 25.3° 25.3°
Dig depth with level bucket mm 0 0 0 0 0 0 0 0
in 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Overall length with bucket on ground mm 3490 3518 3588 3491 3519 3588 3494 3522
in 137.4 138.5 141.3 137.4 138.5 141.3 137.6 138.7
Front clearance circle radius (with bucket) mm 2261 2293 2327 2292 2323 2354 2250 2282
in 89.0 90.3 91.6 90.2 91.5 92.7 88.6 89.8
Tipping load kg 2266 2204 2244 2264 2198 2242 2117 2058
257B2
lb 4997 4860 4947 4992 4847 4943 4668 4538
kg 2202 2140 2179 2200 2135 2177 2054 1995
257B2 HF
lb 4855 4719 4805 4850 4707 4801 4528 4399
Breakout force — lift kg 1683 1632 1667 1682 1629 1666 1576 1526
257B2
lb 3712 3599 3676 3709 3592 3674 3474 3365
kg 1671 1621 1655 1670 1617 1654 1564 1514
257B2 HF
lb 3685 3573 3650 3682 3565 3648 3448 3339
Breakout force — tilt kg 1646 1543 1628 1644 1540 1628 1573 1474
257B2
lb 3629 3403 3590 3625 3397 3589 3469 3251
kg 1646 1543 1628 1644 1540 1628 1573 1474
257B2 HF
lb 3629 3403 3590 3625 3397 3589 3469 3251
Operating weight kg 3624 3657 3641 3626 3661 3642 3751 3783
257B2
lb 7991 8064 8027 7994 8073 8030 8270 8342
kg 3666 3699 3682 3667 3703 3683 3792 3825
257B2 HF
lb 8083 8155 8119 8086 8164 8122 8362 8434
HF = High Flow

Edition 40 3-45
Multi Terrain Loaders Performance Data
● 257B2/257B2 HF

Bucket Type Multi-Purpose Dirt

Bucket Width 1680 mm 1829 mm 1680 mm 1829 mm
(66") (72") (66") (72")
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge Only Edge
Bucket Assembly No. 154-5048 154-5010 154-5049 154-5050 165-6157 152-0232 188-3526 188-2719
Rated bucket capacity m3 0.34 0.37 0.37 0.37 0.37 0.38 0.41 0.42
yd3 0.44 0.48 0.48 0.48 0.48 0.49 0.54 0.55
Struck capacity m3 0.24 0.27 0.28 0.27 0.27 0.27 0.29 0.31
yd3 0.31 0.35 0.36 0.35 0.35 0.35 0.38 0.41
Width mm 1749 1902 1902 1902 1730 1740 1883 1893
in 69.0 75.0 75.0 75.0 68.0 69.0 74.0 75.0
Dump clearance at maximum lift/dump mm 2199 2274 2242 2199 2318 2288 2316 2285
in 86.6 89.5 88.3 86.6 91.3 90.1 91.2 90.0
Reach at maximum lift/dump mm 856 793 801 856 756 763 756 763
in 33.7 31.2 31.5 33.7 29.8 30.0 29.8 30.0
Floor angle at maximum lift/dump degrees 40.5° 40.5° 40.5° 40.5° 40.5° 40.5° 40.5° 40.5°
Floor angle at maximum lift/rack back degrees 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9° 86.9°
Clearance at maximum lift/level bucket mm 2886 2887 2871 2886 2885 2869 2885 2869
in 113.6 113.7 113.0 113.6 113.6 113.0 113.6 113.0
Hinge pin height at maximum lift mm 3081 3081 3081 3081 3081 3081 3081 3081
in 121.3 121.3 121.3 121.3 121.3 121.3 121.3 121.3
Maximum overall height mm 4064 3966 3994 4064 3910 3937 3910 3937
in 160.0 156.1 157.2 160.0 153.9 155.0 153.9 155.0
Reach at level lift arm/bucket mm 1489 1391 1419 1489 1334 1362 1334 1362
in 58.6 54.8 55.9 58.6 52.5 53.6 52.5 53.6
Maximum floor angle at minimum lift degrees 25.3° 25.3° 25.3° 25.3° 25.4° 25.4° 25.4° 25.4°
Dig depth with level bucket mm 0 0 0 0 0 0 0 0
in 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Overall length with bucket on ground mm 3591 3494 3522 3591 3437 3465 3437 3465
in 141.4 137.6 138.7 141.4 135.3 136.4 135.3 136.4
Front clearance circle radius (with bucket) mm 2317 2281 2312 2344 2205 2237 2236 2268
in 91.2 89.8 91.0 92.3 86.8 88.1 88.0 89.3
Tipping load kg 2098 2099 2037 2079 2386 2317 2378 2306
257B2
lb 4626 4629 4491 4585 5260 5109 5244 5084
kg 2034 2036 1974 2016 2320 2252 2312 2240
257B2 HF
lb 4486 4489 4352 4445 5115 4965 5099 4940
Breakout force — lift kg 1560 1561 1509 1545 1761 1709 1755 1700
257B2
lb 3439 3441 3326 3406 3883 3769 3869 3749
kg 1548 1549 1497 1533 1749 1697 1743 1688
257B2 HF
lb 3413 3415 3300 3380 3857 3743 3842 3722
Breakout force — tilt kg 1556 1564 1466 1549 1793 1680 1790 1674
257B2
lb 3430 3450 3232 3416 3954 3705 3946 3691
kg 1556 1564 1466 1549 1793 1680 1790 1674
257B2 HF
lb 3430 3450 3232 3416 3954 3705 3946 3691
Operating weight kg 3767 3769 3805 3786 3568 3600 3575 3611
257B2
lb 8306 8311 8390 8347 7866 7939 7884 7962
kg 3808 3811 3847 3827 3609 3642 3617 3653
257B2 HF
lb 8398 8402 8482 8439 7958 8030 7975 8054
HF = High Flow

3-46 Edition 40
 Performance Data Multi Terrain Loaders
● 257B2/257B2 HF

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Carriage Assembly No. 242-9998 242-9999 243-0000
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 108 108 108
in 4.3 4.3 4.3
Carriage height above blade top mm 923.5 923.5 923.5
in 36.4 36.4 36.4
Blade surface height at maximum height mm 2968 2968 2988
in 116.9 116.9 117.6
Shank front face reach at maximum height mm 655 655 655
in 25.8 25.8 25.8
Blade surface height at level lift arms mm 1554 1554 1554
in 61.2 61.2 61.2
Shank front face reach at level lift arms mm 793 793 793
in 31.2 31.2 31.2
Blade surface height at minimum lift mm 112 112 112
in 4.4 4.4 4.4
Shank front face reach at minimum lift mm 500 500 500
in 19.7 19.7 19.7
Overall length at minimum lift, level tine mm 3806 3966 4116
ft/in 12'6" 13'0" 13'6"
Tipping load kg 1931 1805 1701
257B2
lb 4258 3980 3750
kg 1878 1755 1653
257B2 HF
lb 4141 3870 3646
Operating weight kg 3583 3594 3414
257B2
lb 7901 7924 7528
kg 3625 3635 3645
257B2 HF
lb 7993 8016 8037
HF = High Flow

Edition 40 3-47
Multi Terrain Loaders Performance Data
● 277C

Bucket Type General Purpose High Capacity — GP Multi-Purpose

Bucket Width 1981 mm (78") 2134 mm (84") 1981 mm (78")
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5376 279-5377 279-5378 292-9271 296-8192 296-8191 279-5403 279-5402
Rated bucket capacity m3 0.47 0.49 0.47 0.63 0.63 0.63 0.40 0.42
yd3 0.61 0.64 0.61 0.82 0.82 0.82 0.52 0.55
Struck capacity m3 0.34 0.34 0.34 0.59 0.59 0.59 0.28 0.28
yd3 0.44 0.44 0.44 0.77 0.77 0.77 0.37 0.37
Width mm 2035 2045 2035 2187 2198 2187 2035 2045
in 80.1 80.5 80.1 86.1 86.5 86.1 80.1 80.5
Dump clearance at maximum lift/dump mm 2385 2355 2385 2324.1 2324.1 2324 2378 2348
in 93.9 92.7 93.9 91.5 91.5 91.5 93.6 92.4
Reach at maximum lift/dump mm 652 663 652 722.4 722.4 722 656 666
in 25.7 26.1 25.7 28.4 28.4 28.4 25.8 26.2
Floor angle at maximum lift/dump degrees 40° 40° 40° 40° 40° 40° 40° 40°
Floor angle at maximum lift/rack back degrees 85° 85° 85° 96° 96° 96° 85° 85°
Clearance at maximum lift/level bucket mm 2928 2912 2928 2928 2912 2928 2925 2908
in 115.3 114.6 115.3 115.3 114.6 115.3 115.2 114.5
Hinge pin height at maximum lift mm 3122 3122 3122 3122 3122 3122 3122 3122
in 122.9 122.9 122.9 122.9 122.9 122.9 122.9 122.9
Maximum overall height mm 4051 4079 4149 4051 4079 4149 4055 4083
in 159.5 160.6 163.3 159.5 160.6 163.3 159.6 160.7
Reach at level lift arm/bucket mm 1452 1480 1550 1452 1480 1550 1462 1490
in 57.2 58.3 61.0 57.2 58.3 61.0 57.6 58.7
Maximum floor angle at minimum lift degrees 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 11 27 11 11 11 11 16 33
in 0.4 1.1 0.4 0.4 0.4 0.4 0.6 1.3
Overall length with bucket on ground mm 3766 3794 3863 3838 3860 3935 3768 3796
in 148.3 149.4 152.1 151.1 152.0 154.9 148.3 149.4
Front clearance circle radius (with bucket) mm 2549 2581 2612 2577 2609 2640 2550 2582
in 100.4 101.6 102.8 101.5 102.7 103.9 100.4 101.7
Tipping load kg 3026 2954 3002 2721 2651 2697 2862 2791
lb 6671 6512 6618 5999 5844 5946 6310 6153
Breakout force — lift kg 2629 2563 2611 2517 2449 2500 2503 2438
lb 5796 5650 5756 5549 5399 5512 5518 5375
Breakout force — tilt kg 3086 2923 3067 2743 2602 2724 2989 2830
lb 6803 6444 6762 6047 5736 6005 6590 6239
Operating weight kg 4287 4324 4305 4313 4355 4331 4433 4470
lb 9451 9533 9491 9509 9601 9548 9773 9855

3-48 Edition 40
 Performance Data Multi Terrain Loaders
● 277C

Bucket Type Multi-Purpose Dirt

Bucket Width 1981 mm 2134 mm 1981 mm
(78") (84") (78") 3
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5401 293-0139 296-8057 296-8055 268-4084 268-4083
Rated bucket capacity m3 0.40 0.43 0.43 0.43 0.44 0.45
yd3 0.52 0.56 0.56 0.56 0.58 0.59
Struck capacity m3 0.28 0.30 0.30 0.30 0.32 0.32
yd3 0.37 0.39 0.39 0.39 0.42 0.42
Width mm 2035 2187 2198 2187 1981 1991
in 80.1 86.1 86.5 86.1 78.0 78.4
Dump clearance at maximum lift/dump mm 2378 2378.4 2348 2378.4 2421 2391
in 93.6 93.6 92.4 93.6 95.3 94.1
Reach at maximum lift/dump mm 656 655.5 666.5 655.5 613 624
in 25.8 25.8 26.2 25.8 24.1 24.6
Floor angle at maximum lift/dump degrees 40° 40° 40° 40° 40° 40°
Floor angle at maximum lift/rack back degrees 85° 96° 96° 96° 85° 85°
Clearance at maximum lift/level bucket mm 2925 2925 2908 2925 2930 2914
in 115.2 115.2 114.5 115.2 115.4 114.7
Hinge pin height at maximum lift mm 3122 3122 3122 3122 3233 3233
in 122.9 122.9 122.9 122.9 127.3 127.3
Maximum overall height mm 4153 4055 4083 4153 3998 4026
in 163.5 159.6 160.7 163.5 157.4 158.5
Reach at level lift arm/bucket mm 1560 1462 1490 1560 1402 1430
in 61.4 57.6 58.7 61.4 55.2 56.3
Maximum floor angle at minimum lift degrees 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 16 11 11 11 11 27
in 0.6 0.4 0.4 0.4 0.4 1.1
Overall length with bucket on ground mm 3866 3753 3780 3850 3715 3743
in 152.2 147.8 148.8 151.6 146.3 147.4
Front clearance circle radius (with bucket) mm 2613 2578 2610 2641 2508 2540
in 102.9 101.5 102.8 104.0 98.7 100.0
Tipping load kg 2838 2633 2560 2609 3138 3052
lb 6257 5805 5644 5752 6918 6728
Breakout force — lift kg 2485 2485 2416 2467 2696 2626
lb 5478 5478 5326 5439 5944 5789
Breakout force — tilt kg 2969 2979 2817 2959 3314 3129
lb 6545 6568 6210 6523 7306 6898
Operating weight kg 4451 4447 4489 4465 4265 4305
lb 9813 9804 9897 9844 9403 9491

Edition 40 3-49
Multi Terrain Loaders Performance Data
● 277C

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
Carriage Assembly No. 293-9427 293-9428 293-9429
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 106 106 106
in 4.2 4.2 4.2
Carriage height above blade top mm 930 930 930
in 36.6 36.6 36.6
Blade surface height at maximum height mm 3019 3019 3019
in 118.9 118.9 118.9
Shank front face reach at maximum height mm 389 389 389
in 15.3 15.3 15.3
Blade surface height at level lift arms mm 1608 1608 1608
in 63.3 63.3 63.3
Shank front face reach at level lift arms mm 751 751 751
in 29.6 29.6 29.6
Blade surface height at minimum lift mm 148 148 148
in 5.8 5.8 5.8
Shank front face reach at minimum lift mm 428 428 428
in 16.9 16.9 16.9
Overall length at minimum lift, level tine mm 4079 4079 4079
in 160.6 160.6 160.6
Tipping load kg 2457 2335 2229
lb 5417 5148 4914
Operating weight kg 4203 4213 4223
lb 9266 9288 9310

3-50 Edition 40
 Performance Data Multi Terrain Loaders
● 287C

Bucket Type General Purpose High Capacity — GP Multi-Purpose

Bucket Width 1981 mm (78") 2134 mm (84") 1981 mm (78")
3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5376 279-5377 279-5378 292-9271 296-8192 296-8191 279-5403 279-5402
Rated bucket capacity m3 0.47 0.49 0.47 0.63 0.63 0.63 0.40 0.42
yd3 0.61 0.64 0.61 0.82 0.82 0.82 0.52 0.55
Struck capacity m3 0.34 0.34 0.34 0.59 0.59 0.59 0.28 0.28
yd3 0.44 0.44 0.44 0.77 0.77 0.77 0.37 0.37
Width mm 2035 2045 2035 2187 2198 2187 2035 2045
in 80.1 80.5 80.1 86.1 86.5 86.1 80.1 80.5
Dump clearance at maximum lift/dump mm 2496 2466 2496 2335 2304 2333 2489 2458
in 98.3 97.1 98.3 91.9 90.7 91.9 98.0 96.8
Reach at maximum lift/dump mm 800 814 849 891 897 894 971 982
in 31.5 32.0 33.4 35.1 35.3 35.2 38.2 38.7
Floor angle at maximum lift/dump degrees 40° 40° 40° 50° 50° 50° 40° 40°
Floor angle at maximum lift/rack back degrees 85° 85° 85° 85° 85° 85° 85° 85°
Clearance at maximum lift/level bucket mm 3043 3043 3043 3039 3023 3039 3043 3043
in 119.8 119.8 119.8 119.6 119.0 119.6 119.8 119.8
Hinge pin height at maximum lift mm 3233 3233 3233 3233 3233 3233 3233 3233
in 127.3 127.3 127.3 127.3 127.3 127.3 127.3 127.3
Maximum overall height mm 4075 4089 4124 4221 4247 4319 4075 4089
in 160.4 161.0 162.4 166.2 167.2 170.0 160.4 161.0
Reach at level lift arm/bucket mm 1301 1330 1399 1447 1475 1545 1301 1330
in 51.2 52.4 55.1 57.0 58.1 60.8 51.2 52.4
Maximum floor angle at minimum lift degrees 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 11 27 11 11 27 11 16 33
in 0.4 1.1 0.4 0.4 1.1 0.4 0.6 1.3
Overall length with bucket on ground mm 3692 3720 3790 3838 3866 3935 3745 3773
in 145.4 146.5 149.2 151.1 152.2 154.9 147.4 148.5
Front clearance circle radius (with bucket) mm 2580 2611 2643 2608 2639 2671 2581 2613
in 101.6 102.8 104.1 102.7 103.9 105.2 101.6 102.9
Tipping load kg 3504 3426 3480 3264 3188 3240 3333 3256
lb 7725 7553 7672 7196 7028 7143 7348 7178
Breakout force — lift kg 2408 2347 2391 2309 2245 2291 2281 2222
lb 5309 5174 5271 5090 4949 5051 5029 4899
Breakout force — tilt kg 3086 2923 3067 2743 2602 2724 2988 2830
lb 6803 6444 6762 6047 5736 6005 6587 6239
Operating weight kg 4515 4552 4533 4533 4575 4551 4662 4699
lb 9954 10,035 9994 9994 10,086 10,033 10,278 10,359

Edition 40 3-51
Multi Terrain Loaders Performance Data
● 287C

Bucket Type Multi-Purpose Dirt

Bucket Width 1981 mm 2134 mm 1981 mm
(78") (84") (78")
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5401 293-0139 296-8057 296-8055 268-4084 268-4083
Rated bucket capacity m3 0.40 0.43 0.43 0.43 0.44 0.45
yd3 0.52 0.56 0.56 0.56 0.58 0.59
Struck capacity m3 0.28 0.30 0.30 0.30 0.32 0.32
yd3 0.37 0.39 0.39 0.39 0.42 0.42
Width mm 2035 2187 2198 2187 1981 1991
in 80.1 86.1 86.5 86.1 78.0 78.4
Dump clearance at maximum lift/dump mm 2489 2400 2368 2325 2450 2419
in 98.0 94.5 93.2 91.5 96.5 95.2
Reach at maximum lift/dump mm 971 834 840 896 800 814
in 38.2 32.8 33.1 35.3 31.5 32.0
Floor angle at maximum lift/dump degrees 40° 50° 50° 50° 40° 40°
Floor angle at maximum lift/rack back degrees 85° 85° 85° 85° 85° 85°
Clearance at maximum lift/level bucket mm 3043 3036 3019 3034 3043 3043
in 119.8 119.5 118.9 119.4 119.8 119.8
Hinge pin height at maximum lift mm 3233 3233 3233 3233 3233 3233
in 127.3 127.3 127.3 127.3 127.3 127.3
Maximum overall height mm 4124 4135 4161 4232 4075 4089
in 162.4 162.8 163.8 166.6 160.4 161.0
Reach at level lift arm/bucket mm 1399 1361 1389 1459 1301 1330
in 55.1 53.6 54.7 57.4 51.2 52.4
Maximum floor angle at minimum lift degrees 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 16 16 16 16 11 27
in 0.6 0.6 0.6 0.6 0.4 1.1
Overall length with bucket on ground mm 3843 3745 3773 3843 3692 3720
in 151.3 147.4 148.5 151.3 145.4 146.5
Front clearance circle radius (with bucket) mm 2645 2609 2641 2646 2538 2570
in 104.1 101.6 102.9 104.1 99.9 101.2
Tipping load kg 3309 3185 3105 3160 3634 3539
lb 7295 7022 6845 6967 8012 7802
Breakout force — lift kg 2264 2262 2198 2245 2468 2402
lb 4991 4987 4846 4949 5441 5295
Breakout force — tilt kg 2969 2979 2817 2959 3314 3129
lb 6545 6568 6210 6523 7306 6898
Operating weight kg 4680 4666 4708 4684 4493 4533
lb 10,318 10,287 10,379 10,326 9905 9994

3-52 Edition 40
 Performance Data Multi Terrain Loaders
● 287C

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Carriage Assembly No. 293-9427 293-9428 293-9429
Carriage overall width without step mm 1159 1160 1161
in 45.6 45.7 45.7
Carriage step additional width mm 106 107 108
in 4.2 4.2 4.3
Carriage height above blade top mm 930 931 932
in 36.6 36.7 36.7
Blade surface height at maximum height mm 3130 3131 3132
in 123.2 123.3 123.3
Shank front face reach at maximum height mm 703 704 705
in 27.7 27.7 27.8
Blade surface height at level lift arms mm 1608 1609 1610
in 63.3 63.3 63.4
Shank front face reach at level lift arms mm 751 752 753
in 29.6 29.6 29.6
Blade surface height at minimum lift mm 90 91 92
in 3.5 3.6 3.6
Shank front face reach at minimum lift mm 425 426 427
in 16.7 16.8 16.8
Overall length at minimum lift, level tine mm 4065 4066 4067
in 160.0 160.1 160.1
Tipping load kg 2822 2678 2555
lb 6221 5904 5633
Operating weight kg 4451 4451 4451
lb 9813 9813 9813

Edition 40 3-53
Multi Terrain Loaders Performance Data
● 297C

Bucket Type General Purpose High Capacity — GP Multi-Purpose

Bucket Width 1981 mm (78") 2134 mm (84") 1981 mm (78")
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5376 279-5377 279-5378 292-9271 296-8192 296-8191 279-5403 279-5402
Rated bucket capacity m3 0.47 0.49 0.47 0.63 0.63 0.63 0.40 0.42
yd3 0.61 0.64 0.61 0.82 0.82 0.82 0.52 0.55
Struck capacity m3 0.40 0.34 0.34 0.59 0.59 0.59 0.28 0.28
yd3 0.52 0.44 0.44 0.77 0.77 0.77 0.37 0.37
Width mm 2035 2045 2035 2187 2198 2187 2035 2045
in 80.1 80.5 80.1 86.1 86.5 86.1 80.1 80.5
Dump clearance at maximum lift/dump mm 2444 2412 2367 2370 2338 2367 2536 2506
in 96.2 95.0 93.2 93.3 92.0 93.2 99.8 98.7
Reach at maximum lift/dump mm 814 819 874 871 876 874 974 985
in 32.0 32.2 34.4 34.3 34.5 34.4 38.3 38.8
Floor angle at maximum lift/dump degrees 51° 51° 51° 51° 51° 51° 40° 40°
Floor angle at maximum lift/rack back degrees 83° 83° 83° 83° 83° 83° 85° 85°
Clearance at maximum lift/level bucket mm 3086 3070 3086 3086 3070 3086 3043 3043
in 121.5 120.9 121.5 121.5 120.9 121.5 119.8 119.8
Hinge pin height at maximum lift mm 3280 3280 3280 3280 3280 3280 3233 3233
in 129.1 129.1 129.1 129.1 129.1 129.1 127.3 127.3
Maximum overall height mm 4168 4194 4265 4260 4286 4265 4075 4089
in 164.1 165.1 167.9 167.7 168.7 167.9 160.4 161.0
Reach at level lift arm/bucket mm 1341 1369 1439 1434 1462 1439 1301 1330
in 52.8 53.9 56.7 56.5 57.6 56.7 51.2 52.4
Maximum floor angle at minimum lift degrees 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 11 27 11 11 11 11 16 33
in 0.4 1.1 0.4 0.4 0.4 0.4 0.6 1.3
Overall length with bucket on ground mm 3886 3914 3984 3980 4027 3984 3905 3933
in 153.0 154.1 156.9 156.7 158.5 156.9 153.7 154.8
Front clearance circle radius (with bucket) mm 2654 2685 2718 2682 2713 2746 2655 2687
in 104.5 105.7 107.0 105.6 106.8 108.1 104.5 105.8
Tipping load kg 3698 3620 3674 3596 3519 3572 3524 3448
lb 8153 7981 8100 7928 7758 7875 7769 7602
Breakout force — lift kg 2273 2214 2255 2179 2118 2161 2146 2088
lb 5011 4881 4971 4804 4669 4764 4731 4603
Breakout force — tilt kg 3086 2923 3067 2743 2602 2724 2988 2830
lb 6803 6444 6762 6047 5736 6005 6587 6239
Operating weight kg 4552 4589 4570 4694 4736 4712 4699 4736
lb 10,035 10,117 10,075 10,348 10,441 10,388 10,359 10,441

3-54 Edition 40
 Performance Data Multi Terrain Loaders
● 297C

Bucket Type Multi-Purpose Dirt

Bucket Width 1981 mm 2134 mm 1981 mm
(78") (84") (78") 3
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5401 293-0139 296-8057 296-8055 268-4084 268-4083
Rated bucket capacity m3 0.40 0.43 0.43 0.43 0.44 0.45
yd3 0.52 0.56 0.56 0.56 0.58 0.59
Struck capacity m3 0.28 0.30 0.30 0.30 0.32 0.32
yd3 0.37 0.39 0.39 0.39 0.42 0.42
Width mm 2035 2187 2198 2187 1981 1991
in 80.1 86.1 86.5 86.1 78.0 78.4
Dump clearance at maximum lift/dump mm 2536 2436 2405 2359 2579 2549
in 99.8 95.9 94.7 92.9 101.5 100.4
Reach at maximum lift/dump mm 974 816 821 876 931 942
in 38.3 32.1 32.3 34.5 36.7 37.1
Floor angle at maximum lift/dump degrees 40° 51° 51° 51° 40° 40°
Floor angle at maximum lift/rack back degrees 85° 83° 83° 83° 85° 85°
Clearance at maximum lift/level bucket mm 3043 3083 3067 3081 3043 3043
in 119.8 121.4 120.7 121.3 119.8 119.8
Hinge pin height at maximum lift mm 3233 3280 3280 3280 3233 3233
in 127.3 129.1 129.1 129.1 127.3 127.3
Maximum overall height mm 4124 4175 4201 4271 4075 4089
in 162.4 164.4 165.4 168.1 160.4 161.0
Reach at level lift arm/bucket mm 1399 1348 1376 1446 1301 1330
in 55.1 53.1 54.2 56.9 51.2 52.4
Maximum floor angle at minimum lift degrees 26.4° 26.4° 26.4° 26.4° 26.4° 26.4°
Dig depth with level bucket mm 16 16 33 16 11 27
in 0.6 0.6 1.3 0.6 0.4 1.1
Overall length with bucket on ground mm 4002 3893 3921 3991 3852 3880
in 157.6 153.3 154.4 157.1 151.7 152.8
Front clearance circle radius (with bucket) mm 2720 2683 2715 2748 2612 2643
in 107.1 105.6 106.9 108.2 102.8 104.1
Tipping load kg 3500 3520 3438 3496 3828 3733
lb 7716 7760 7579 7707 8439 8230
Breakout force — lift kg 2128 2126 2064 2108 2328 2266
lb 4691 4687 4550 4647 5132 4996
Breakout force — tilt kg 2969 2979 2817 2959 3314 3129
lb 6545 6568 6210 6523 7306 6898
Operating weight kg 4717 4828 4870 4846 4530 4570
lb 10,399 10,644 10,736 10,684 9987 10,075

Edition 40 3-55
Multi Terrain Loaders Performance Data
● 297C

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
Carriage Assembly No. 293-9427 293-9428 293-9429
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 106 106 106
in 4.2 4.2 4.2
Carriage height above blade top mm 930 930 930
in 36.6 36.6 36.6
Blade surface height at maximum height mm 3177 3177 3177
in 125.1 125.1 125.1
Shank front face reach at maximum height mm 703 703 703
in 27.7 27.7 27.7
Blade surface height at level lift arms mm 1608 1608 1608
in 63.3 63.3 63.3
Shank front face reach at level lift arms mm 751 751 751
in 29.6 29.6 29.6
Blade surface height at minimum lift mm 148 148 148
in 5.8 5.8 5.8
Shank front face reach at minimum lift mm 425 425 425
in 16.7 16.7 16.7
Overall length at minimum lift, level tine mm 4216 4376 4526
in 166.0 172.3 178.2
Tipping load kg 3036 2886 2756
lb 6693 6363 6076
Operating weight kg 4488 4498 4508
lb 9894 9916 9938

3-56 Edition 40
 Dimensions Multi Terrain Loaders
● 247B2/257B2

MODEL 247B2 257B2

Rated operating capacity* 929 kg 2050 lb 1134 kg 2500 lb
A Height to top of ROPS 1990 mm 6'6" 2022 mm 6'7"
B Length to coupler 2518 mm 8'3" 2701 mm 8'10"
C Length with bucket on ground 3285 mm 10'8" 3490 mm 11'5"
D Maximum overall height 3799 mm 12'4" 3963 mm 13'0"
E Ground clearance 267 mm 10.5" 257 mm 10"
F Departure angle 41° 37°
G Wheelbase 1499 mm 4'11" 1499 mm 4'11"
H Hinge pin height at carry position 234 mm 8" 234 mm 8"
Bucket overall width with edge 1730 mm 6'6" 1730 mm 6'6"
J Clearance at maximum lift/dump 2134 mm 7'0" 2278 mm 7'5"
K Floor angle at maximum lift/dump 40° 40°
L Floor angle at maximum lift/rack 96.7° 86.9°
M Clearance at maximum lift/level 2667 mm 8'8" 2889 mm 9'5"
N Hinge pin height at maximum lift 2862 mm 9'4" 3018 mm 10'1"
O Reach at level lift arm/bucket 1395 mm 4'7" 1387 mm 4'6"
Bumper overhang from axle 576 mm 1'10" 672 mm 2'2"
Maximum floor angle at carry position 26.4° 26.8°
*SAE J818 MAY87, ISO 5998:1986.
NOTE: 247B2/257B2 machine dimensions shown with standard machine equipped with 1676 mm (66") dirt bucket.

Edition 40 3-57
Multi Terrain Loaders Dimensions
● 277C/287C/297C

MODEL 277C 287C 297C

Rated operating capacity* 1060 kg 2337 lb 1229 kg 2709 lb 1363 kg 3005 lb
Rated operating capacity at 50% 1451 kg 3200 lb 1724 kg 3801 lb 1905 kg 4200 lb
A Height to top of ROPS 2115 mm 6'11" 2115 mm 6'11" 2115 mm 6'11"
B Length to coupler 2974 mm 9'9" 2973 mm 9'9" 3115 mm 10'3"
C Length with bucket on ground 3692 mm 12'1" 3692 mm 12'1" 3833 mm 12'7"
D Maximum overall height 3998 mm 13'1" 4075 mm 13'4" 4115 mm 13'6"
E Ground clearance 225 mm 8.9" 225 mm 8.9" 225 mm 8.9"
F Departure angle 42° 42° 35°
G Wheelbase 1808 mm 5'11" 1808 mm 5'11" 1808 mm 5'11"
H Hinge pin height at carry position 200 mm 7.9" 200 mm 7.9" 200 mm 7.9"
Bucket overall width with edge 1981 mm 6'6" 1981 mm 6'6" 1981 mm 6'6"
J Clearance at maximum lift/dump 2425 mm 7'11" 2450 mm 8'0" 2487 mm 8'0"
K Floor angle at maximum lift/dump 40° 50° 51°
L Floor angle at maximum lift/rack 85° 85° 83°
M Clearance at maximum lift/level 2930 mm 9'7" 3043 mm 10'0" 3088 mm 10'2"
N Hinge pin height at maximum lift 3122 mm 10'3" 3233 mm 10'7" 3279 mm 10'9"
O Reach at level lift arm/bucket 1390 mm 4'7" 1285 mm 4'3" 1273 mm 4'2"
Bumper overhang from axle 689 mm 2'3" 689 mm 2'3" 830 mm 2'9"
Maximum floor angle
at carry position 26° 26° 26°
*SAE J818 MAY87, ISO 5998:1986.
NOTE: 277C/287C/297C machine dimensions shown with standard machine equipped with 1981 mm (78") dirt bucket.

3-58 Edition 40
 Work Tool Compatibility Multi Terrain Loaders
● 247B2/257B2/277C/287C/297C

CAT WORK TOOL COMPATIBILITY

247B2 257B2 277C 287C 297C 3
General Purpose Buckets
1524 mm (60") A A NR NR NR
1676 mm (66") O O NR NR NR
1829 mm (72") O O A A A
1981 mm (78") A A O O O
High Capacity Bucket (GP)
2134 mm (84") NR NR O O O
Dirt Buckets
1524 mm (60") A A NR NR NR
1676 mm (66") O O NR NR NR
1829 mm (72") O O A A A
1981 mm (78") O O O O O
Utility Buckets
1524 mm (60") A A NR NR NR
1676 mm (66") O O NR NR NR
1829 mm (72") O O A A A
Light Material Buckets
1829 mm (72") O O A A A
1981 mm (78") A A O O O
2134 mm (84") A A O O O
2438 mm (96") A O O O O
Multi-Purpose Buckets
1524 mm (60") A A NR NR NR
1676 mm (66") O O NR NR NR
1829 mm (72") O O A A A
1981 mm (78") A A O O O
2134 mm (84") NR NR O O O
Industrial Grapple Buckets
1524 mm (60") A A NR NR NR
1676 mm (66") O O NR NR NR
1829 mm (72") O O A A A
1981 mm (78") A A O O O
Industrial Grapple Forks
1676 mm (66") O O A A A
1829 mm (72") O O O O O
Industrial Grapple Rakes
1829 mm (72") O O O O O
2134 mm (84") O O O O O
Utility Grapple Buckets
1524 mm (60") A A NR NR NR
1676 mm (66") O O NR NR NR
1829 mm (72") O O A A A
O – Provides Optimum Performance.
A – Provides Acceptable Performance.
NR – Not Recommended.

Edition 40 3-59
Multi Terrain Loaders Work Tool Compatibility
● 247B2/257B2/277C/287C/297C

CAT WORK TOOL COMPATIBILITY

247B2 257B2 277C 287C 297C
Carriage O O O O O
Pallet Forks
910 mm (36") Tines O O O O O
1070 mm (42") Tines O O O O O
1220 mm (48") Tines O O O O O
Utility Grapple Forks
1676 mm (66") O O A A A
1829 mm (72") O O O O O
Utility Forks
1676 mm (66") O O A A A
1829 mm (72") O O O O O
Angle Blades
1829 mm (72") A A NR NR NR
2134 mm (84") O O O O O
6 Way Blades
2000 mm (79") O O O O O
2337 mm (92") A A O O O
A14B Auger O O O O O
A19B Auger O O O O O
A26B Auger X X O# O# O#
Backhoe
BH150 O O X X X
BH160 X X O O O
BH27 O O X X X
BH30 O O X X X
BH30W X X O O O
BR160 Brushcutter O O O O O
BR166 Brushcutter O O O O O
BR172 Brushcutter O O O O O
BR272 Brushcutter X O# X X X
BR378 Brushcutter X X O# O# O#
BP15B Pickup Broom O! O A A A
BP18B Pickup Broom X O! O O O
BA18 Angle Broom O O O O O
BU115 Utility Broom O! O A A A
BU118 Utility Broom X O! O O O
O – Provides Optimum Performance.
O# – The machine performance is optimum with the available HF/XPS option.
A – Provides Acceptable Performance.
NR – Not Recommended.
X – Not Approved. Do Not Use.
! – Lift Restriction.

3-60 Edition 40
 Work Tool Compatibility Multi Terrain Loaders
● 247B2/257B2/277C/287C/297C

CAT WORK TOOL COMPATIBILITY

247B2 257B2 277C 287C 297C 3
PC203 Cold Planer O O O O O
PC204 Cold Planer X A O O O
PC205 Cold Planer X X O# O# O#
PC206 Cold Planer X X O# O# O#
PC210 Cold Planer X X O# O# O#
H55D S Hammer O O O O O
H65D S Hammer O O O O O
LR15B Landscape Rake O! O! NR NR NR
LR18B Landscape Rake O! O! O O O
LT13B Landscape Tiller O! O! NR NR NR
LT18B Landscape Tiller O O! O O O
Material Handling Arm O O O O O
HM312 Mulcher X X O# O# O#
HM315 Mulcher X X O# O# O#
PR172 Power Box Rake O O A A A
PR184 Power Box Rake O O O O O
PR190 Power Box Rake A A O O O
SR117 Snowblower O O NR NR NR
SR118 Snowblower NR NR A A A
SR121 Snowblower NR NR O O O
SR318 Snowblower NR O# A# A# A#
SR321 Snowblower NR O# O# O# O#
SG16B Stump Grinder O O O O O
SG18B Stump Grinder X X O# O# O#
T6B Trencher O O O O O
T9B Trencher A O O O O
T15 Trencher X X O# O# O#
CV16B Vibratory Compactor O! O! O O O
CV18B Vibratory Compactor X X O O O
SW45 Wheel Saw X X O# O# O#
SW60 Wheel Saw X X O# O# O#
O – Provides Optimum Performance.
O# – The machine performance is optimum with the available HF/XPS option.
A – Provides Acceptable Performance.
A# – The machine performance is acceptable with the available HF/XPS option.
NR – Not Recommended.
X – Not Approved. Do Not Use.
! – Lift Restriction.

Edition 40 3-61
Compact Track Loaders Specifications
● 279C/289C/299C

MODEL 279C 289C 299C

Flywheel Power: Net 61 kW 82 hp 61 kW 82 hp 67 kW 90 hp
Flywheel Power: Gross 63 kW 84 hp 63 kW 85 hp 70 kW 94 hp
Engine Model C3.4 DIT C3.4 DIT C3.4 DIT
Rated Engine RPM 2500 2500 2500
Bore 94 mm 3.7" 94 mm 3.7" 94 mm 3.7"
Stroke 120 mm 4.7" 120 mm 4.7" 120 mm 4.7"
Displacement 3.3 L 201 in3 3.3 L 201 in3 3.3 L 201 in3
No. Cylinders 4 4 4
One Speed Forward 0-8.1 km/h 0-5 mph 0-8.1 km/h 0-5 mph 0-8.1 km/h 0-5 mph
Two Speed Forward 0-13.6 km/h 0-8.5 mph 0-13.6 km/h 0-8.5 mph 0-13.6 km/h 0-8.5 mph
One Speed Reverse 0-8.1 km/h 0-5 mph 0-8.1 km/h 0-5 mph 0-8.1 km/h 0-5 mph
Two Speed Reverse 0-13.6 km/h 0-8.5 mph 0-13.6 km/h 0-8.5 mph 0-13.6 km/h 0-8.5 mph
Hydraulic Cycle Time, Empty Bucket: Seconds Seconds Seconds
Raise 3.1 4.7 4.7
Dump 2.5 2.5 2.5
Lower (Empty, Float Down) 4.0 4.6 4.6
Total 9.6 11.8 11.8
Tread Width (per side) 457 mm 18" 457 mm 18" 457 mm 18"
Width Over Tracks 1981 mm 78" 1981 mm 78" 1981 mm 78"
Ground Clearance 231 mm 9.1" 231 mm 9.1" 231 mm 9.1"
Fuel Tank Capacity 98 L 26 U.S. gal 98 L 26 U.S. gal 98 L 26 U.S. gal
Hydraulic Tank Capacity 42 L 11 U.S. gal 42 L 11 U.S. gal 42 L 11 U.S. gal
Hydraulic System Capacity
(includes tank) 57 L 15.1 U.S. gal 57 L 15 U.S. gal 57 L 15 U.S. gal
Hydraulic Pump Capacity 84 L/min 22 gpm 84 L/min 22 gpm 84 L/min 22 gpm

3-62 Edition 40
 Performance Data Compact Track Loaders
● 279C

Bucket Type General Purpose High Capacity — GP Multi-Purpose

Bucket Width 1981 mm (78") 2134 mm (84") 1981 mm (78")
3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5376 279-5377 279-5378 292-9271 296-8192 296-8191 279-5403 279-5402
Rated bucket capacity m3 0.47 0.49 0.47 0.63 0.63 0.63 0.40 0.42
yd3 0.61 0.64 0.61 0.82 0.82 0.82 0.52 0.55
Struck capacity m3 0.34 0.34 0.34 0.59 0.59 0.59 0.28 0.28
yd3 0.44 0.44 0.44 0.77 0.77 0.77 0.37 0.37
Width mm 2035 2045 2035 2187 2198 2187 2035 2045
in 80.1 80.5 80.1 86.1 86.5 86.1 80.1 80.5
Dump clearance at maximum lift/dump mm 2391 2361 2333 2330 2305 2277 2384 2354
in 94.0 93.0 91.9 92.0 90.7 89.6 94.0 92.7
Reach at maximum lift/dump mm 633 644 702 703 721 779 636 647
in 25.0 25.4 27.6 28.0 28.4 30.7 25.0 25.5
Floor angle at maximum lift/dump degrees 40° 40° 40° * * * 40° 40°
Floor angle at maximum lift/rack back degrees 85° 85° 85° * * * 85° 85°
Clearance at maximum lift/level bucket mm 2934 2918 2934 * 2918 2934 2931 2915
in 115.5 114.9 115.5 * 114.9 115.5 115.4 114.8
Hinge pin height at maximum lift mm 3128 3128 3128 3128 3128 3128 3128 3128
in 123.2 123.2 123.2 123.2 123.2 123.2 123.2 123.2
Maximum overall height mm 4058 4087 4148 * 4180 4241 4065 4094
in 159.8 160.9 163.3 * 164.6 167.0 160.0 161.2
Reach at level lift arm/bucket mm 1434 1466 1524 * 1555 1613 1447 1477
in 56.5 57.7 60.0 * 61.2 63.5 57.0 58.1
Maximum floor angle at minimum lift degrees 26° 26° 26° 26° 26° 26° 26° 26°
Dig depth with level bucket mm 11 27 11 * 27 11 16 33
in 0.4 1.1 0.4 * 1.1 0.4 0.6 1.3
Overall length with bucket on ground mm 3726 3758 3816 * 3847 3905 3729 3759
in 146.7 148.0 150.2 * 151.5 153.7 146.8 148.0
Front clearance circle radius (with bucket) mm 2357 2389 2421 * 2474 2506 2360 2392
in 92.8 94.1 95.3 * 97.5 98.7 92.9 94.2
Tipping load kg 2838 2769 2815 2749 2675 2725 2679 2611
lb 6258 6106 6207 6062 5898 6009 5907 5757
Breakout force — lift kg 2631 2565 2614 * 2454 2504 2505 2440
lb 5801 5656 5764 * 5411 5521 5524 5380
Breakout force — tilt kg 3085 2923 3066 * 2602 2724 2988 2830
lb 6802 6445 6761 * 5737 6006 6589 6240
Operating weight kg 4509 4546 4527 * 4583 4559 4655 4692
lb 9942 10,024 9982 * 10,106 10,053 10,264 10,346
*Information not available at time of printing.

Edition 40 3-63
Compact Track Loaders Performance Data
● 279C

Bucket Type Multi-Purpose Dirt

Bucket Width 1981 mm 2134 mm 1981 mm
(78") (84") (78")
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5401 293-0139 296-8057 296-8055 268-4084 268-4083
Rated bucket capacity m3 0.40 0.43 0.43 0.43 0.44 0.45
yd3 0.52 0.56 0.56 0.56 0.58 0.59
Struck capacity m3 0.28 0.30 0.30 0.30 0.32 0.32
yd3 0.37 0.39 0.39 0.39 0.42 0.42
Width mm 2035 2187 2198 2187 1981 1991
in 80.1 86.1 86.5 86.1 78.0 78.4
Dump clearance at maximum lift/dump mm 2326 2384 2354 2326 2427 2397
in 91.6 94.0 92.7 91.6 95.6 94.0
Reach at maximum lift/dump mm 705 636 647 705 594 605
in 27.8 25.0 25.5 27.8 23.4 24.0
Floor angle at maximum lift/dump degrees 40° * * * 40° 40°
Floor angle at maximum lift/rack back degrees 85° * * * 85° 85°
Clearance at maximum lift/level bucket mm 2931 2931 2915 2931 2937 2921
in 115.4 115.4 114.8 115.4 115.6 115.0
Hinge pin height at maximum lift mm 3128 3128 3128 3128 3128 3128
in 123.2 123.2 123.2 123.2 123.2 123.2
Maximum overall height mm 4155 4065 4094 4155 4005 4034
in 163.6 160.0 161.2 163.6 157.7 158.8
Reach at level lift arm/bucket mm 1537 1447 1447 1537 1387 1419
in 60.5 57.0 57.0 60.5 54.6 55.9
Maximum floor angle at minimum lift degrees 26° 26° 26° 26° 26° 26°
Dig depth with level bucket mm 16 16 33 16 11 27
in 0.6 0.6 1.3 0.6 0.4 1.1
Overall length with bucket on ground mm 3819 3729 3759 3819 3679 3711
in 150.4 146.8 148 150.4 144.8 146.1
Front clearance circle radius (with bucket) mm 2424 2474 2506 2538 2314 2345
in 95.4 97.4 98.7 99.9 91.1 92.3
Tipping load kg 2656 2661 2588 2638 2941 2859
lb 5857 5868 5707 5817 6485 6304
Breakout force — lift kg 2487 2490 2421 2472 2699 2628
lb 5484 5491 5338 5451 5951 5795
Breakout force — tilt kg 2969 2979 2817 2959 3314 3129
lb 6547 6569 6212 6525 7307 6884
Operating weight kg 4673 4674 4716 4692 4487 4527
lb 10,304 10,306 10,399 10,346 9894 9982
*Information not available at time of printing.

3-64 Edition 40
 Performance Data Compact Track Loaders
● 279C

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Carriage Assembly No. 261-6681 261-6681 261-6681
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 106 106 106
in 4.2 4.2 4.2
Carriage height above blade top mm 930 930 930
in 36.6 36.6 36.6
Blade surface height at maximum height mm 3025 3025 3025
in 119.0 119.0 119.0
Shank front face reach at maximum height mm 381 381 381
in 15.0 15.0 15.0
Blade surface height at level lift arms mm 1545 1545 1545
in 60.8 60.8 60.8
Shank front face reach at level lift arms mm 849 849 849
in 33.0 33.0 33.0
Blade surface height at minimum lift mm 122 122 122
in 4.8 4.8 4.8
Shank front face reach at minimum lift mm 409 409 409
in 16.1 16.1 16.1
Overall length at minimum lift, level tine mm 3997 4149 4302
in 157.4 163.3 169.4
Tipping load kg 2465 2316 2193
lb 5435 5107 4836
Operating weight kg 4449 4459 4468
lb 9810 9832 9852

Edition 40 3-65
Compact Track Loaders Performance Data
● 289C

Bucket Type General Purpose High Capacity — GP Multi-Purpose

Bucket Width 1981 mm (78") 2134 mm (84") 1981 mm (78")
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5376 279-5377 279-5378 292-9270 296-8192 296-8191 279-5403 279-5402
Rated bucket capacity m3 0.47 0.49 0.47 0.63 0.63 0.63 0.40 0.42
yd3 0.61 0.64 0.61 0.82 0.82 0.82 0.52 0.55
Struck capacity m3 0.34 0.34 0.34 0.59 0.59 0.59 0.28 0.28
yd3 0.44 0.44 0.44 0.77 0.77 0.77 0.37 0.37
Width mm 2035 2045 2035 2187 2198 2187 2035 2045
in 80.1 80.5 80.1 86.1 86.5 86.1 80.1 80.5
Dump clearance at maximum lift/dump mm 2414 2382 2345 2341 2309 2272 2406 2374
in 95.0 93.8 92.3 92.0 90.9 89.4 95.0 93.5
Reach at maximum lift/dump mm 813 819 871 872 877 930 815 821
in 32.0 32.2 34.3 34.0 34.5 36.6 32.0 32.3
Floor angle at maximum lift/dump degrees 50° 50° 50° * * * * *
Floor angle at maximum lift/rack back degrees 85° 85° 85° * * * * *
Clearance at maximum lift/level bucket mm 3044 3028 3044 3044 3028 3044 3041 3025
in 119.8 119.2 119.8 119.8 119.2 119.8 119.7 119.1
Hinge pin height at maximum lift mm 3239 3239 3239 3239 3239 3239 3239 3239
in 127.5 127.5 127.5 127.5 127.5 127.5 127.5 127.5
Maximum overall height mm 4134 4160 4224 4227 4253 4317 4141 4167
in 162.8 163.8 166.3 166.4 167.4 170.0 163.0 164.1
Reach at level lift arm/bucket mm 1335 1363 1425 1424 1456 1514 1342 1370
in 52.8 53.7 56.1 56.1 57.3 59.6 52.8 53.9
Maximum floor angle at minimum lift degrees 26° 26° 26° 26° 26° 26° 26° 26°
Dig depth with level bucket mm 11 27 11 11 27 11 16 33
in 0.4 1.1 0.4 0.4 1.1 0.4 0.6 1.3
Overall length with bucket on ground mm 3726 3758 3816 3815 3847 3905 3729 3759
in 146.7 148.0 150.2 150.2 151.5 153.7 146.8 148.0
Front clearance circle radius (with bucket) mm 2357 2389 2421 2442 2474 2506 2360 2392
in 92.8 94.1 95.3 96.1 97.4 98.7 92.9 94.2
Tipping load kg 3378 3303 3355 3274 3195 3250 3213 3139
lb 7448 7283 7397 7219 7045 7166 7085 6922
Breakout force — lift kg 2410 2348 2392 2313 2249 2295 2283 2223
lb 5314 5177 5288 5100 4959 5061 5034 4902
Breakout force — tilt kg 3086 2923 3066 2743 2602 2724 2988 2830
lb 6805 6445 6761 6048 5737 6006 6589 6240
Operating weight kg 4724 4761 4742 4756 4798 4774 4870 4907
lb 10,416 10,498 10,456 10,487 10,580 10,527 10,738 10,820
*Information not available at time of printing.

3-66 Edition 40
 Performance Data Compact Track Loaders
● 289C

Bucket Type Multi-Purpose Dirt

Bucket Width 1981 mm 2134 mm 1981 mm
(78") (84") (78") 3
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5401 293-0139 296-8057 296-8055 268-4084 268-4083
Rated bucket capacity m3 0.40 0.43 0.43 0.43 0.44 0.45
yd3 0.52 0.56 0.56 0.56 0.58 0.59
Struck capacity m3 0.28 0.30 0.30 0.30 0.32 0.32
yd3 0.37 0.39 0.39 0.39 0.42 0.42
Width mm 2035 2187 2198 2187 1981 1991
in 80.1 86.1 86.5 86.1 78.0 78.4
Dump clearance at maximum lift/dump mm 2337 2406 2374 2337 2456 2424
in 92.0 95.0 93.5 92.0 96.7 95.0
Reach at maximum lift/dump mm 873 815 821 873 781 786
in 34.4 32.0 32.2 34.4 30.7 31.0
Floor angle at maximum lift/dump degrees 50° * * * 50° 50°
Floor angle at maximum lift/rack back degrees 85° * * * 85° 85°
Clearance at maximum lift/level bucket mm 3041 3041 3025 3041 3047 3031
in 119.7 119.7 119.1 119.7 120.0 119.3
Hinge pin height at maximum lift mm 3239 3239 3239 3239 3239 3239
in 127.5 127.5 127.5 127.5 127.5 127.5
Maximum overall height mm 4231 4141 4167 4231 4081 4108
in 166.6 163.0 164.1 166.6 160.7 161.7
Reach at level lift arm/bucket mm 1432 1342 1370 1432 1282 1309
in 56.4 52.8 53.9 56.4 50.5 51.5
Maximum floor angle at minimum lift degrees 26° 26° 26° 26° 26° 26°
Dig depth with level bucket mm 16 16 33 16 11 27
in 0.6 0.6 1.3 0.6 0.4 1.1
Overall length with bucket on ground mm 3819 3729 3759 3819 3679 3711
in 150.4 146.8 148.0 150.4 144.8 146.1
Front clearance circle radius (with bucket) mm 2424 2474 2506 2538 2314 2345
in 95.4 97.4 98.7 99.9 91.1 92.3
Tipping load kg 3190 3196 3116 3172 3502 3412
lb 7034 7047 6871 6994 7722 7523
Breakout force — lift kg 2265 2267 2203 2249 2469 2404
lb 4994 4999 4858 4959 5444 5301
Breakout force — tilt kg 2969 2979 2817 2959 3314 3129
lb 6547 6569 6212 6525 7307 6899
Operating weight kg 4888 4889 4931 4907 4702 4742
lb 10,778 10,780 10,873 10,820 10,368 10,456
*Information not available at time of printing.

Edition 40 3-67
Compact Track Loaders Performance Data
● 289C

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
Carriage Assembly No. 261-6681 261-6681 261-6681
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 106 106 106
in 4.2 4.2 4.2
Carriage height above blade top mm 930 930 930
in 36.6 36.6 36.6
Blade surface height at maximum height mm 3130 3130 3130
in 123.0 123.0 123.0
Shank front face reach at maximum height mm 695 695 695
in 27.4 27.4 27.4
Blade surface height at level lift arms mm 1636 1636 1636
in 64.4 64.4 64.4
Shank front face reach at level lift arms mm 743 743 743
in 29.0 29.0 29.0
Blade surface height at minimum lift mm 122 122 122
in 4.8 4.8 4.8
Shank front face reach at minimum lift mm 409 409 409
in 16.1 16.1 16.1
Overall length at minimum lift, level tine mm 3997 4149 4302
in 157.4 163.3 169.4
Tipping load kg 2891 2709 2560
lb 6375 5973 5645
Operating weight kg 4664 4674 4683
lb 10,284 10,306 10,326

3-68 Edition 40
 Performance Data Compact Track Loaders
● 299C

Bucket Type General Purpose High Capacity — GP Multi-Purpose

Bucket Width 1981 mm (78") 2134 mm (84") 1981 mm (78")
3
Holes Bolt-on Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Only Edge Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5376 279-5377 279-5378 292-9270 296-8192 296-8191 279-5403 279-5402
Rated bucket capacity m3 0.47 0.49 0.47 0.63 0.63 0.63 0.40 0.42
yd3 0.61 0.64 0.61 0.82 0.82 0.82 0.52 0.55
Struck capacity m3 0.34 0.34 0.34 0.59 0.59 0.59 0.28 0.28
yd3 0.44 0.44 0.44 0.77 0.77 0.77 0.37 0.37
Width mm 2035 2045 2035 2187 2198 2187 2035 2045
in 80.1 80.5 80.1 86.1 86.5 86.1 80.1 80.5
Dump clearance at maximum lift/dump mm 2450 2418 2380 2376 2344 2306 2442 2410
in 96.0 95.2 93.7 94.0 92.3 90.8 96.0 94.9
Reach at maximum lift/dump mm 794 799 851 851 856 908 796 801
in 31.0 31.5 33.5 34.0 33.7 35.7 31.0 31.5
Floor angle at maximum lift/dump degrees 51° 51° 51° * * * 51° 51°
Floor angle at maximum lift/rack back degrees 83° 83° 83° * * * 83° 83°
Clearance at maximum lift/level bucket mm 3092 3076 3092 3092 3076 3092 3089 3072
in 121.7 121.1 121.7 121.7 121.1 121.7 121.6 120.9
Hinge pin height at maximum lift mm 3286 3286 3286 3286 3286 3286 3286 3286
in 129.4 129.4 129.4 129.4 129.4 129.4 129.4 129.4
Maximum overall height mm 4174 4200 4263 4266 4292 4355 4180 4206
in 164.3 165.4 167.8 168.0 169.0 171.5 164.6 165.6
Reach at level lift arm/bucket mm 1322 1350 1412 1411 1443 1501 1329 1357
in 52.0 53.1 55.6 55.6 56.8 59.1 52.3 53.4
Maximum floor angle at minimum lift degrees 26° 26° 26° 26° 26° 26° 26° 26°
Dig depth with level bucket mm 11 27 11 11 27 11 16 33
in 0.4 1.1 0.4 0.4 1.1 0.4 0.6 1.3
Overall length with bucket on ground mm 3956 3988 4046 3956 3988 4046 3870 3900
in 155.7 157.0 159.3 155.7 157.0 159.3 152.4 153.5
Front clearance circle radius (with bucket) mm 2442 2474 2506 2442 2474 2506 2360 2392
in 96.1 97.4 98.7 96.1 97.4 98.7 92.9 94.2
Tipping load kg 3653 3576 3629 3543 3463 3519 3485 3410
lb 8055 7885 8002 7812 7636 7759 7684 7519
Breakout force — lift kg 2276 2217 2258 2185 2124 2168 2149 2091
lb 5019 4889 4879 4818 4683 4780 4739 4611
Breakout force — tilt kg 3086 2923 3067 2743 2602 2724 2988 2830
lb 6805 6445 6763 6048 5737 6006 6589 6240
Operating weight kg 4889 4926 4907 4921 4963 4939 5036 5073
lb 10,780 10,862 10,820 10,851 10,943 10,891 11,104 11,186
*Information not available at time of printing.

Edition 40 3-69
Compact Track Loaders Performance Data
● 299C

Bucket Type Multi-Purpose Dirt

Bucket Width 1981 mm 2134 mm 1981 mm
(78") (84") (78")
Bolt-on Holes Bolt-on Bolt-on Holes Bolt-on
Ground Engaging Type Teeth Only Edge Teeth Only Edge
Bucket Assembly No. 279-5401 293-0139 296-8057 296-8055 268-4084 268-4083
Rated bucket capacity m3 0.40 0.43 0.43 0.43 0.44 0.45
yd3 0.52 0.56 0.56 0.56 0.58 0.59
Struck capacity m3 0.28 0.30 0.30 0.30 0.32 0.32
yd3 0.37 0.39 0.39 0.39 0.42 0.42
Width mm 2035 2187 2198 2187 1981 1991
in 80.1 86.1 86.5 86.1 78.0 78.4
Dump clearance at maximum lift/dump mm 2372 2442 2410 2372 2493 2461
in 93.4 96.0 94.9 93.4 98.1 97.0
Reach at maximum lift/dump mm 853 796 801 853 763 768
in 33.6 31.0 31.5 33.6 30.0 30.0
Floor angle at maximum lift/dump degrees 51° * * * 51° 51°
Floor angle at maximum lift/rack back degrees 83° * * * 83° 83°
Clearance at maximum lift/level bucket mm 3089 3089 3072 3089 3094 3078
in 121.6 121.6 120.9 121.6 121.8 121.2
Hinge pin height at maximum lift mm 3286 3286 3286 3286 3286 3286
in 129.4 129.4 129.4 129.4 129.4 129.4
Maximum overall height mm 4269 4180 4206 4269 4121 4147
in 168.1 164.6 165.6 168.1 162.2 163.3
Reach at level lift arm/bucket mm 1419 1329 1357 1419 1269 1297
in 55.9 52.3 53.4 55.9 50.0 51.1
Maximum floor angle at minimum lift degrees 26° 26° 26° 26° 26° 26°
Dig depth with level bucket mm 16 16 33 16 11 27
in 0.6 0.6 1.3 0.6 0.4 1.1
Overall length with bucket on ground mm 3960 3870 3900 3960 3820 3852
in 155.9 152.4 153.5 155.9 150.4 151.7
Front clearance circle radius (with bucket) mm 2424 2474 2506 2538 2314 2345
in 95.4 97.4 98.7 99.9 91.1 92.3
Tipping load kg 3462 3468 3387 3444 3782 3690
lb 7634 7647 7468 7594 8339 8136
Breakout force — lift kg 2131 2133 2071 2115 2331 2269
lb 4699 4703 4567 4664 5140 5003
Breakout force — tilt kg 2969 2979 2817 2959 3314 3129
lb 6547 6569 6212 6525 7307 6899
Operating weight kg 5054 5055 5097 5073 4867 4907
lb 11,144 11,146 11,239 11,186 10,732 10,820
*Information not available at time of printing.

3-70 Edition 40
 Performance Data Compact Track Loaders
● 299C

Work Tool Pallet Fork

Tine Length 910 mm (36") 1070 mm (42") 1220 mm (48")
3
Carriage Assembly No. 261-6681 261-6681 261-6681
Carriage overall width without step mm 1159 1159 1159
in 45.6 45.6 45.6
Carriage step additional width mm 106 106 106
in 4.2 4.2 4.2
Carriage height above blade top mm 930 930 930
in 36.6 36.6 36.6
Blade surface height at maximum height mm 3177 3177 3177
in 125.0 125.0 125.0
Shank front face reach at maximum height mm 698 698 698
in 27.5 27.5 27.5
Blade surface height at level lift arms mm 1677 1677 1677
in 66.0 66.0 66.0
Shank front face reach at level lift arms mm 730 730 730
in 29.0 29.0 29.0
Blade surface height at minimum lift mm 122 122 122
in 4.8 4.8 4.8
Shank front face reach at minimum lift mm 409 409 409
in 16.1 16.1 16.1
Overall length at minimum lift, level tine mm 4138 4290 4443
in 162.9 168.9 174.9
Tipping load kg 3124 2932 2774
lb 6888 6465 6117
Operating weight kg 4830 4840 4849
lb 10,635 10,672 10,692

Edition 40 3-71
Compact Track Loaders Dimensions
● 279C/289C/299C

MODEL 279C 289C 299C

Rated operating capacity 1016 kg 2240 lb 1222 kg 2695 lb 1318 kg 2905 lb
Rated operating capacity at 50% 1451 kg 3200 lb 1746 kg 3850 lb 1882 kg 4150 lb
A Height to top of ROPS 2117 mm 6'11" 2117 mm 6'11" 2117 mm 6'11"
B Length to coupler 2960 mm 9'9" 2960 mm 9'8" 3101 mm 10'2"
C Length with bucket on ground 3679 mm 12'1" 3679 mm 12'1" 3820 mm 12'7"
D Maximum overall height 4005 mm 13'2" 4081 mm 13'5" 4121 mm 13'6"
E Ground clearance 231 mm 9.1" 231 mm 9.1" 231 mm 9.1"
F Departure angle 44° 44° 38°
G Wheelbase 1767 mm 5'10" 1767 mm 5'10" 1767 mm 5'10"
H Hinge pin height at carry position 195 mm 7.7" 195 mm 7.7" 195 mm 7.7"
Bucket overall width with edge 1981 mm 6'6" 1981 mm 6'6" 1981 mm 6'6"
J Clearance at maximum lift/dump 2395 mm 7'10" 2456 mm 8'1" 2493 mm 8'2"
K Floor angle at maximum lift/dump 40° 50° 51°
L Floor angle at maximum lift/rack 85° 85° 83°
M Clearance at maximum lift/level 2937 mm 9'8" 3047 mm 10'0" 3094 mm 10'2"
N Hinge pin height at maximum lift 3128 mm 10'3" 3239 mm 10'8" 3286 mm 10'9"
O Reach at level lift arm/bucket 1387 mm 4'7" 1282 mm 4'3" 1269 mm 4'2"
Bumper overhang from axle 719 mm 2'4" 719 mm 2'4" 860 mm 2'10"
Maximum floor angle
at carry position 26° 26° 26°

3-72 Edition 40
 Work Tool Compatibility Compact Track Loaders
● 279C/289C/299C

CAT WORK TOOL COMPATIBILITY

279C 289C 299C 3
General Purpose Buckets
1524 mm (60") NR NR NR
1676 mm (66") NR NR NR
1829 mm (72") A A A
1981 mm (78") O O O
High Capacity Bucket (GP)
2134 mm (84") O O O
Dirt Buckets
1524 mm (60") NR NR NR
1676 mm (66") NR NR NR
1829 mm (72") A A A
1981 mm (78") O O O
Utility Buckets
1524 mm (60") NR NR NR
1676 mm (66") NR NR NR
1829 mm (72") A A A
Light Material Buckets
1829 mm (72") A A A
1981 mm (78") O O O
2134 mm (84") O O O
2438 mm (96") O O O
Multi-Purpose Buckets
1524 mm (60") NR NR NR
1676 mm (66") NR NR NR
1829 mm (72") A A A
1981 mm (78") O O O
2134 mm (84") O O O
Industrial Grapple Buckets
1524 mm (60") NR NR NR
1676 mm (66") NR NR NR
1829 mm (72") A A A
1981 mm (78") O O O
Industrial Grapple Forks
1676 mm (66") A A A
1829 mm (72") O O O
Industrial Grapple Rakes
1829 mm (72") O O O
2134 mm (84") O O O
Utility Grapple Buckets
1524 mm (60") NR NR NR
1676 mm (66") NR NR NR
1829 mm (72") A A A
O – Provides Optimum Performance.
A – Provides Acceptable Performance.
NR – Not Recommended.

Edition 40 3-73
Compact Track Loaders Work Tool Compatibility
● 279C/289C/299C

CAT WORK TOOL COMPATIBILITY

279C 289C 299C
Carriage O O O
Pallet Forks
910 mm (36") Tines O O O
1070 mm (42") Tines O O O
1220 mm (48") Tines O O O
Utility Grapple Forks
1676 mm (66") A A A
1829 mm (72") O O O
Utility Forks
1676 mm (66") A A A
1829 mm (72") O O O
Angle Blades
1829 mm (72") NR NR NR
2134 mm (84") O O O
6 Way Blades
2000 mm (79") O O O
2337 mm (92") O O O
A14B Auger O O O
A19B Auger O O O
A26B Auger O# O# O#
Backhoe
BH150 X X X
BH160 O O O
BH27 X X X
BH30 X X X
BH30W O O O
BR160 Brushcutter O O O
BR166 Brushcutter O O O
BR172 Brushcutter O O O
BR272 Brushcutter O# O# O#
BR378 Brushcutter O# O# O#
BP15B Pickup Broom A A A
BP18B Pickup Broom O O O
BA18 Angle Broom O O O
BU115 Utility Broom A A A
BU118 Utility Broom O O O
O – Provides Optimum Performance.
O# – The machine performance is optimum with the available HF/XPS option.
A – Provides Acceptable Performance.
NR – Not Recommended.
X – Not Approved. Do Not Use.

3-74 Edition 40
 Work Tool Compatibility Compact Track Loaders
● 279C/289C/299C

CAT WORK TOOL COMPATIBILITY

279C 289C 299C 3
PC203 Cold Planer O O O
PC204 Cold Planer O O O
PC205 Cold Planer O# O# O#
PC206 Cold Planer O# O# O#
PC210 Cold Planer O# O# O#
H55D S Hammer O O O
H65D S Hammer O O O
LR15B Landscape Rake NR NR NR
LR18B Landscape Rake O O O
LT13B Landscape Tiller NR NR NR
LT18B Landscape Tiller O O O
Material Handling Arm O O O
HM312 Mulcher O# O# O#
HM315 Mulcher O# O# O#
PR172 Power Box Rake A A A
PR184 Power Box Rake O O O
PR190 Power Box Rake O O O
SR117 Snowblower NR NR NR
SR118 Snowblower A A A
SR121 Snowblower O O O
SR318 Snowblower O# O# O#
SR321 Snowblower O# O# O#
SG16B Stump Grinder O O O
SG18B Stump Grinder O# O# O#
T6B Trencher O O O
T9B Trencher O O O
T15 Trencher O# O# O#
CV16B Vibratory Compactor O O O
CV18B Vibratory Compactor O O O
SW45 Wheel Saw O# O# O#
SW60 Wheel Saw O# O# O#
O – Provides Optimum Performance.
O# – The machine performance is optimum with the available HF/XPS option.
A – Provides Acceptable Performance.
NR – Not Recommended.

Edition 40 3-75
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Augers
Compact Track Loaders

Features: Market Opportunities

● Cat XT™-3 hose and O-ring face seals are used ● Agriculture — Augers are an effective work tool
throughout for superior leak-free performance. around the farm to drill holes for fence posts, pole
● Both standard and tree bits are available in barn supports and footers for outbuildings.
a variety of sizes for a wide range of projects. ● Building/General Construction — Augers are
● Standard bit teeth and pilot points are produced an essential work tool on many construction sites
from hardened steel. Optional hardfaced and car- to drill holes for deck posts and footings, signs and
bide inserted teeth are also available. fencing.

● Optional bit extension is available in 305 mm ● Landscaping/Landscape Maintenance —

(12") length. Augers with special tree bits are ideal for prepar-
ing holes for tree planting. They are also ideal for
● Hex-to-round shaft adapter is available to school, park, golf course and recreational main-
accommodate existing round auger bit mountings. tenance departments to drill holes for playground
● A14B and A19B are compatible with both mini supports, trees and shrubs, fence posts, and signs.
hydraulic excavators and skid steer loaders. ● Governmental/Municipalities — Augers with
multiple bit sizes are popular work tools to do a
A14B Auger wide spectrum of jobs, including digging holes for
● Direct drive system features a variable speed, traffic signs, poles, posts and trees.
bi-directional, “Gerotor” style hydraulic motor that ● Rental — Augers are one of the highest oppor-
generates optimal speed and output torque for tunity rental work tool after buckets.
light to moderate duty work.
● Specialty Trades/Utility — Augers are ideal for
A19B Auger electrical, fencing and plumbing contractors when
● Single reduction planetary drive system trans- installing lighting, fence posts and gas/water mains.
fers power from the drive motor to the drive shaft, Augers are typically not a full time work tool, how-
reducing motor speed and increasing torque. ever they are a highly utilized option for specialized
● Drive motor shaft is splined and couples directly applications. They are often used in conjunction
to the planetary gearbox. with a bucket, set of pallet forks and/or a trencher.
Auger Bits
A26B Auger Auger bits are available in both standard and tree
● Double reduction planetary drive system trans- bit configurations with standard hardened, revers-
fers power from the drive motor to the drive shaft, ible teeth and cast/hardened pilot point. Optional
reducing motor speed and increasing torque. hardfaced and carbide inserted teeth and pilot points
● Drive motor shaft is splined and couples directly are available for aggressive boring conditions. Stan-
to the planetary gearbox. dard bits are available diameters ranging from 6"–36";
tree bits are available in 24" and 36" diameters.
Typical digging depth is 48", however for deeper
holes, optional 12" and 24" extensions are available.
A special HEX to round adapter is also available for
customers who use existing round shaft auger bits.
Machine Compatibility
Auger Model Machine Models
A14B 216B2, 226B2, 232B2, 236B2, 242B2, 247B2,
252B2, 257B2, 246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C
A19B 216B2, 226B2, 232B2, 236B2, 242B2, 247B2,
252B2, 257B2, 246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C
A26B 246C, 256C, 262C, 272C, 277C, 287C, 297C,
279C, 289C, 299C

3-76 Edition 40
 Work Tools Skid Steer Loaders
● Augers Multi Terrain Loaders
Compact Track Loaders

B A
3

D
E

MODEL A14B A19B A26B

A Overall width with bracket 1152 mm 45" 1152 mm 45" 1152 mm 45"
B Overall length with bracket 598 mm 24" 598 mm 24" 598 mm 24"
C Overall drive unit height 1020 mm 40" 934 mm 37" 978 mm 39"
D Housing diameter 252 mm 10" 252 mm 10" 252 mm 10"
E Swing range 102° 102° 102°
Drive unit weight with
hydraulic lines without bit 101 kg 223 lb 75 kg 165 lb 91 kg 201 lb
Mounting frame weight
with clevis 91 kg 201 lb 91 kg 201 lb 91 kg 201 lb
Total weight without bit 192 kg 423 lb 166 kg 366 lb 182 kg 402 lb
Drive method Gerotor Motor — Gerotor Motor — Gear Motor —
Direct Single Planetary Reduction Double Planetary Reduction
Required hydraulic flow range 42-80 L/min 11-21 gpm 42-80 L/min 11-21 gpm 95-130 L/min 25-34 gpm
Optimal hydraulic pressure range 145-230 bar 2103-3336 psi 145-230 bar 2103-3336 psi 207-290 bar 3002-4206 psi
Effective displacement 629.1 cm3/rev 38.39 in3/rev 250 cm3/rev 15.26 in3/rev 43.77 cm3/rev 2.685 in3/rev
Drive shaft torque @
maximum pressure* 2304 N•m 1700 lb-ft 4118 N•m 3037 lb-ft 6826 N•m 5034 lb-ft
Bit speed (drive shaft) @
maximum flow 127 RPM 71 RPM 84 RPM
HEX output shaft size 51 mm 2" 51 mm 2" 51 mm 2"
Auger bit retention method Cross bolts/nuts Cross bolts/nuts Cross bolts/nuts
Hydraulic hose Cat XT-3 ES Cat XT-3 ES Cat XT-6 ES
*Theoretical values calculated at 100% efficiency.

Edition 40 3-77
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Augers
Compact Track Loaders

A14B Auger
Theoretical Bit Speed Theoretical Digging Torque
L/min gpm RPM bar psi N•m lb-ft
42 11 54 145 2100 1764 1300
45 12 59 152 2200 1848 1362
49 13 64 159 2300 1932 1424
53 14 69 166 2400 2016 1486
57 15 74 172 2500 2100 1548
61 16 79 179 2600 2184 1610
64 17 84 186 2700 2268 1672
68 18 89 193 2800 2352 1734
72 19 94 200 2900 2436 1795
76 20 99 207 3000 2520 1857
80 21 104 214 3100 2604 1919
83 22 109 221 3200 2688 1981
87 23 114 228 3300 2772 2043

A19B Auger
Theoretical Bit Speed Theoretical Digging Torque
L/min gpm RPM bar psi N•m lb-ft
42 11 38 145 2100 2535 1868
45 12 41 152 2200 2655 1956
49 13 45 159 2300 2776 2045
53 14 48 166 2400 2897 2134
57 15 52 172 2500 3017 2223
61 16 55 179 2600 3138 2312
64 17 59 186 2700 3259 2401
68 18 62 193 2800 3379 2490
72 19 65 200 2900 3500 2579
76 20 69 207 3000 3621 2668
80 21 72 214 3100 3741 2757
83 22 76 221 3200 3862 2846
87 23 79 228 3300 3983 2935

A26B Auger
Theoretical Bit Speed Theoretical Digging Torque
L/min gpm RPM bar psi N•m lb-ft
95 25 61 207 3000 4719 3492
99 26 64 214 3100 4880 3611
102 27 66 220 3200 5034 3725
106 28 69 227 3300 5191 3841
110 29 71 234 3400 5348 3958
114 30 74 241 3500 5506 4074
118 31 76 248 3600 5663 4191
121 32 79 255 3700 5820 4307
125 33 81 262 3800 5977 4423
129 34 84 269 3900 6135 4540
133 35 86 276 4000 6292 4656
136 36 88 282 4100 6449 4772
140 37 91 289 4200 6607 4889
144 38 93 296 4300 6764 5005
148 39 96 303 4400 6921 5122
152 40 98 310 4500 7079 5238

3-78 Edition 40
 Work Tools Skid Steer Loaders
● Brushcutters Multi Terrain Loaders
Compact Track Loaders

Features: Cat Brushcutters are used for clearing overgrowth

● High-strength blades deliver high cutting action from highway medians, utility easements and for ini-
tial land clearing for housing, parks and recreational 3
and durability, and also mulch overgrowth.
areas.
● Fully balanced blade carriers prevent unnec-
essary vibration. Machine Compatibility
● High-strength frame with reinforced corner Brushcutter Model Machine Models
gussets provide strength in critical areas. BR160 216B, 226B, 232B, 236B, 242B,
247B, 252B, 257B, 246C, 256C,
● Long life motors deliver years of high-speed 262C, 277C, 287C, 297C, 279C,
blade performance. 289C, 299C
● Machined and heat treated gears in sealed BR166 216B, 226B, 232B, 236B, 242B,
247B, 252B, 257B, 246C, 256C,
gearbox provide reliable, durable transfer of 262C, 277C, 287C, 297C, 279C,
torque from motor to blade carrier. 289C, 299C
● Tapered blade carrier allows cutter to ride up BR172 216B, 226B, 232B, 236B, 242B,
247B, 252B, 257B, 246C, 256C,
over stumps and rocks. 262C, 277C, 287C, 297C
● Galvanized coil chains provide debris guarding BR272* 226B, 242B, 257B, 279C, 289C, 299C
in the front and rear areas to restrict flying debris BR378* 246C, 256C, 262C, 272C, 277C,
and material. 287C, 297C, 279C, 289C, 299C
*Requires high flow or high flow XPS option on machine.
● Heavy-duty skids allow easy movement of the
brushcutter through uneven terrain while main-
taining stability of the work tool and machine.
● Motor protection guard shields motor and gear
box from debris. Removing a set of bolts allows
this hinged guard to be moved away for easy access
to motor and gear box.
● Cat XT-3 hose, couplings and O-ring face
seals provide superior, leak-free performance and
reliability. All hoses are wrapped with nylon woven
cordura sleeving for added operator protection.
Hydraulic quick disconnects enable fast tool changes.
● Quick coupler with rugged, opposing edge design
holds the work tool securely and allows the oper-
ator to quickly change from one high performance
Cat Work Tool to another.

Edition 40 3-79
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Brushcutters
Compact Track Loaders

MODEL BR160 BR166 BR172

A Overall width 1575 mm 62" 1727 mm 68" 1880 mm 74"
B Overall length 1854 mm 73" 2007 mm 79" 2159 mm 85"
C Overall height 762 mm 80" 762 mm 80" 762 mm 30"
Cutting width 1524 mm 60" 1676 mm 66" 1829 mm 72"
Unit weight 431 kg 950 lb 476 kg 1050 lb 499 kg 1100 lb
Required hydraulic flow range 57-80 L/min 15-21 psi 57-80 L/min 15-21 psi 57-80 L/min 15-21 psi
Optimal hydraulic pressure range 150-228 bar 2176-3300 psi 150-228 bar 2176-3300 psi 150-228 bar 2176-3300 psi
Tip speed range 3987- 13,080- 3130- 10,270- 3417- 11,210-
(depends on flow) 5596 m/min 18,360 ft/min 4395 m/min 14,420 ft/min 4795 m/min 15,730 ft/min

MODEL BR272 BR378

A Overall width 1880 mm 74" 2032 mm 80"
B Overall length 2159 mm 85" 2311 mm 91"
C Overall height 762 mm 30" 762 mm 30"
Cutting width 1829 mm 72" 1981 mm 78"
Unit weight 508 kg 1120 lb 535 kg 1180 lb
Required hydraulic flow range 76-100 L/min 20-26 psi 76-130 L/min 20-34 psi
Optimal hydraulic pressure range 150-228 bar 2176-3300 psi 150-280 bar 2176-4060 psi
Tip speed range 4554- 14,940- 3392- 11,130-
(depends on flow) 5992 m/min 19,660 ft/min 5800 m/min 19,030 ft/min

3-80 Edition 40
 Work Tools Skid Steer Loaders
● Cold Planers Multi Terrain Loaders
Compact Track Loaders

Features: Market Opportunities

● Self-leveling design automatically levels itself ● Infrastructure/Heavy Construction — Skid
3
when placed on the ground for consistent depth steer mounted cold planers are frequently used
control without operator adjustments and excel- on bridges to remove pavement where large ded-
lent spoil retention. icated planers are restricted due to weight.
● Two wear resistant skid plates remain parallel ● Concrete/Masonry (Including Asphalt/Paving)
to the ground for optimum stability. — Cold planers are used extensively by paving
contractors in urban and rural settings to remove
● Hydraulic side-shift permits close planing to damaged pavement prior to overlay, remove excess
curbs, walls and other obstructions. pavement, provide specific surface texture (skid
● Independent left/right depth control allows resistance), remove traffic lane stripes and re-estab-
maximum drum depths to be adjusted indepen- lish proper draining characteristics of pavement.
dently on each skid. The gauges are easily viewable ● Governmental/Municipalities (Street and Road
from the cab. Independent depth control is mechan- Maintenance) — Cold planers are ideal for urban
ical on standard flow planers and hydraulic on high road and parking lot maintenance departments
flow planers. to remove cracked or deteriorated pavement, mill-
● Spring tilt and hydraulic tilt enable planers ing bumps or imperfections in expanded pavement.
to oscillate for angled cuts. Tilt is hydraulically Cold planers are highly utilized work tools for
controlled on high flow models and spring con- specialized applications. They are often used in con-
trolled on standard flow planers. junction with a bucket and broom.
● Direct drive on standard flow models features Machine Compatibility
a variable speed, unidirectional, gerotor style Cold Planer Model Machine Models
hydraulic motor.
PC203 216B2, 226B2, 232B2, 236B2,
● Planetary drive on high flow models features 242B2, 247B2, 252B2, 257B2,
246C, 256C, 262C, 277C,
a variable speed, unidirectional, axial piston style 287C, 297C, 279C, 289C, 299C
hydraulic motor mounted to a double reduction PC204 226B2, 236B2, 242B2, 252B2,
gearbox. 257B2, 246C, 256C, 262C, 277C,
287C, 297C, 279C, 289C, 299C
● Optional concrete bits and water sprinkler PC205* 226B2, 242B2, 252B2, 257B2,
kits are available for all models. 246C, 256C, 262C, 277C,
287C, 297C, 279C, 289C, 299C
● Cat XT-3 and medium pressure hose, couplings PC206* 246C, 256C, 262C, 272C, 277C,
and O-ring face seals provide superior, leak- 287C, 297C, 279C, 289C, 299C
free performance and reliability. PC210* 246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C
● Quick coupler with rugged, opposing edge design
*Requires high flow or high flow XPS option on machine.
holds the work tool securely and allows the oper-
ator to quickly change from one high performance
Cat Work Tool to another.
Conical Bits: Cold planer drums are designed
with an optimal bit pattern to provide maximum
cutting performance and efficiency, while ensuring
superior surface texture. Standard all-purpose tung-
sten carbide inserted conical bits provide all-pur-
pose planing in most applications.

Edition 40 3-81
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Cold Planers
Compact Track Loaders

MODEL PC203 PC204 PC205

A Overall width 1720 mm 68" 1720 mm 68" 1720 mm 68"
B Maximum drum width 350 mm 14" 450 mm 18" 450 mm 18"
Optional drum widths (depths) 80 (200) mm 3 (8)" 80 (200) mm 3 (8)" 80 (200) mm 3 (8)"
152 (200) mm 6 (8)" 152 (200) mm 6 (8)" 152 (200) mm 6 (8)"
203 (200) mm 8 (8)" 203 (200) mm 8 (8)" 305 (200) mm 12 (8)"
305 (200) mm 12 (8)" 305 (200) mm 12 (8)" 450 (200) mm 18 (8)"
350 (200) mm 14 (8)" 450 (150) mm 18 (6)"
400 (200) mm 16 (8)"
450 (200) mm 18 (8)"
450 (150) mm 18 (6)"
C Overall height 840 mm 33" 840 mm 33" 990 mm 39"
D Length 1180 mm 46" 1180 mm 46" 1180 mm 46"
Weight 650 kg 1433 lb 690 kg 1521 lb 750 kg 1654 lb
Drive method Direct drive Direct drive Planetary drive
Required hydraulic flow range 55-100 L/min 14-26 gpm 55-100 L/min 14-26 gpm 80-125 L/min 21-33 gpm
Optimal hydraulic pressure range 160-240 bar 2320-3580 psi 160-240 bar 2320-3580 psi 160-300 bar 2320-4350 psi
Drum torque @ max. pressure 1460 N•m 1077 lb-ft 1460 N•m 1077 lb-ft 2487 N•m 1834 lb-ft
Drum speed @ max. flow 178 RPM 178 RPM 223 RPM
Bit speed @ max. flow 202 RPM 202 RPM 220 RPM
Number of conical bits 42 per 350 mm 48 per 450 mm 48 per 450 mm
(12") drum (18") drum (18") drum
Standard bit type All purpose All purpose All purpose
Maximum depth of cut 127 mm 5" 127 mm 5" 125 mm 5"
Tilt angle range 8.5° 8.5° 8.5°
Side shift travel 650 mm 26" 650 mm 26" 650 mm 26"

3-82 Edition 40
 Work Tools Skid Steer Loaders
● Cold Planers Multi Terrain Loaders
Compact Track Loaders

MODEL PC206 PC210

A Overall width 1720 mm 68" 1720 mm 68"
B Maximum drum width 600 mm 24" 1000 mm 38"
Optional drum widths (depths) 80 (200) mm 3 (8)" —
152 (200) mm 6 (8)"
305 (200) mm 12 (8)"
450 (200) mm 18 (8)"
450 (150) mm 18 (6)"
C Overall height 950 mm 37" 890 mm 35"
D Length 1265 mm 55" 1130 mm 44"
Weight 906 kg 1998 lb 1080 kg 2381 lb
Drive method Planetary drive Planetary drive
Required hydraulic flow range 95-140 L/min 25-37 gpm 95-180 L/min 25-48 gpm
Optimal hydraulic pressure range 160-300 bar 2320-4350 psi 160-300 bar 2320-4350 psi
Drum torque @ max. pressure 3465 N•m 2556 lb-ft 3339 N•m 2463 lb-ft
Drum speed @ max. flow 160 RPM 240 RPM
Bit speed @ max. flow 160 RPM 173 RPM
Number of conical bits 60 per 600 mm 78 per 1000 mm
(24") drum (40") drum
Standard bit type All purpose All purpose
Maximum depth of cut 170 mm 7" 105 mm 4"
Tilt angle range 8.5° 8.5°
Side shift travel 650 mm 26" 465 mm 18"

Edition 40 3-83
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Landscape Tillers
Compact Track Loaders

Features: Market Opportunities

● Two sizes available: the 1321 mm (52") working ● Agriculture — Landscape tillers provide an
width LT13B and the 1854 mm (73") working width effective work tool around the farm or orchard to
LT18B. Both units efficiently utilize the standard breakup and condition soil prior to planting.
flow auxiliary hydraulic horsepower capabilities
of Cat Skid Steer Loaders. ● Building/General Construction — Landscape
tillers can be used on construction sites to level
● Direct drive system features two in-line motors soil and remove ruts.
that transmit power directly from the drive motor
shaft to the tiller shaft. Power to both ends of the ● Landscaping/Landscape Maintenance — Land-
shaft eliminates torque twist and increased sys- scape tillers are ideal for mixing and composting
tem performance. soils for improved seedbeds, soil stabilization and
soil preparation prior to landscaping and laying sod.
● Adjustable skid shoes provide a working depth
range of 25-152 mm (1"-6"). ● Governmental/Municipalities — Landscape
tillers are ideal for city maintenance departments
● High strength medium carbon alloy steel and parks to recondition, level and stabilize soil
tines are hardened for maximum strength, dura- after utility work or prior to yearly landscaping.
bility and wear life in the toughest soil conditions.
Landscape tillers are productive work tools for
● Cat XT-3 hose and O-ring face seals are used specialized applications. They are often used in con-
throughout for superior leak-free performance. junction with a bucket, landscape rake and auger.
Machine Compatibility
Landscape Tiller Model Machine Models
LT13B 216B2, 226B2, 232B2, 236B2,
242B2, 247B2, 252B2, 257B2,
246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C
LT18B 236B2, 247B2, 252B2, 257B2,
246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C

3-84 Edition 40
 Work Tools Skid Steer Loaders
● Landscape Tillers Multi Terrain Loaders
Compact Track Loaders

MODEL LT13B LT18B

A Overall width 1788 mm 70.5" 2271 mm 89.5"
B Working width 1321 mm 52" 1847 mm 73"
C Height 755 mm 30" 755 mm 30"
D Length 956 mm 38" 956 mm 38"
Working depth range 25-152 mm 1"-6" 25-152 mm 1"-6"
Weight 340 kg 750 lb 420 kg 926 lb
Drive method Direct drive Direct drive
Number of motors Two in-line Two in-line
Hydraulic flow range 42-83 L/min 11-22 gpm 95-114 L/min 25-30 gpm
Hydraulic pressure range 145-227 bar 2100-3300 psi 207-310 bar 3000-4500 psi
Motor size 305 cm3 18.6 in3 305 cm3 18.6 in3
Effective displacement 629.1 cm3 38.4 in3 629.1 cm3 38.4 in3
Drum speed @ maximum flow 127 RPM @ 127 RPM @ 127 RPM @ 127 RPM @
80 L/min 21 gpm 80 L/min 21 gpm
Fasteners Cat Cat
Hydraulic hose Cat XT-3 ES Cat XT-3 ES
Number of tines 24 36

Edition 40 3-85
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Landscape Rakes
Compact Track Loaders

Features: Market Opportunities

● Two sizes available: the 1321 mm (62") working ● Agriculture — Landscape rakes provide an
width LR15B and the 1880 mm (74") working width effective work tool around the farm or nursery to
LR18B. Both units efficiently utilize the standard condition, level and remove rock and foreign
flow auxiliary hydraulic horsepower capabilities material from soil prior to planting.
of Cat Skid Steer Loaders.
● Building/General Construction — Landscape
● Chain reduction drive system features #80H rakes can be used on construction sites to level
roller chain for strength and durability, a variable and remove debris from soil prior to landscaping
speed unidirectional gerotor motor for maximum and seeding.
performance and cartridge relief valve for system
protection. ● Demolition — Landscape rakes provide an excel-
lent means to clean up loose material after the
● Durable #2060H conveyor chain provides demolition work is complete.
strength, durability and long life in a variety of
soil conditions. ● Landscaping/Landscape Maintenance — Land-
scape rakes are ideal for aerating, conditioning,
● High strength medium carbon alloy steel teeth leveling and removing rocks from soil prior to
are hardened for maximum strength, durability seeding or laying sod. They also are ideal for con-
and wear life in the toughest soil conditions. ditioning and cleaning baseball fields.
● Quick dumping capability is accomplished with Landscape rakes are productive work tools for
a poppet check valve. Once the hopper bucket is specialized applications. They are often used in con-
full, simply reverse flow to actuate the rake head junction with a bucket, landscape tiller and auger.
and dump the bucket.
Machine Compatibility
● Cat XT-3 hose and O-ring face seals are used The following are the recommended and approved
throughout for superior leak-free performance. Cat machine/Landscape Rake combinations for maxi-
mum system performance.
Landscape Rake Model Machine Models*
LR15B 216B2, 226B2, 232B2, 236B2,
242B2, 247B2, 252B2, 257B2,
246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C
LR18B 236B2, 247B2, 252B2, 257B2,
246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C
*Lift restriction! Do not raise lift arm — work tool hinge higher than 1 m (3 ft)
above the ground. Tipping can result.

3-86 Edition 40
 Work Tools Skid Steer Loaders
● Landscape Rakes Multi Terrain Loaders
Compact Track Loaders

A
3

C E
B

MODEL LR15B LR18B

A Overall width 1683 mm 66" 1990 mm 78"
B Working width 1576 mm 62" 1883 mm 74"
C Raking width 1384 mm 55" 1655 mm 65"
D Height 989 mm 39" 989 mm 39"
E Length 1620 mm 64" 1620 mm 64"
Weight 595 kg 1312 lb 615 kg 1355 lb
Drive method Chain reduction Chain reduction
Drive chain #80H #80H
Conveyor chain #2060H #2060H
Hydraulic flow range 42-83 L/min 11-22 gpm 42-83 L/min 11-22 gpm
Hydraulic pressure range 145-227 bar 2100-3000 psi 145-227 bar 2100-3000 psi
Bucket capacity (struck)* 0.31 m3 0.4 yd3 0.34 m3 0.44 yd3
Motor size 305 cm3 18.6 in3 305 cm3 18.6 in3
Effective displacement 484.5 cm3 29.5 in3 484.5 cm3 29.5 in3
Driven shaft speed 165 RPM @ 165 RPM @ 165 RPM @ 165 RPM @
80 L/min 21 gpm 80 L/min 21 gpm
Torque @ 230 bar (3336 psi) 1774 N•m 1310 lb-ft 1774 N•m 1310 lb-ft
Fasteners Cat Cat
Hydraulic hose Cat XT-3 ES Cat XT-3 ES
Number of teeth 372 444
Rock size 19-52 mm 0.75"-6" 19-52 mm 0.75"-6"
*Rated struck capacities shown as per ISO 7546: 1983 and SAE J742 FEB85.

Edition 40 3-87
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Mulchers
Compact Track Loaders

Features: The Cat Mulcher is designed for high-performance

● Axial piston hydraulic motor provides smooth, cutting, and mulching vegetation and undergrowth
efficient performance. from typical forested terrain. The hydraulic mulcher
reduces saplings, shrubs and trees into mulched
● Rugged mulching head processes trees up to material, making it ideal for environmental mainte-
200 mm (8 in) diameter for effective forestry clear- nance, such as creating fire lanes. Other applications
ing applications. include: reclaiming untilled land, removing foliage
● Fixed tooth balanced rotor provides excellent from building construction sites, and shredding pruned
operating efficiency at high speed. material and organic waste for biomass production.

● Adjustable push frame is standard equipment Machine Compatibility

Mulcher Model Machine Models
on the HM312 and provides the ability to position
trees to allow for optimum cutting and efficiency. HM312* 246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C
In forestry operation it also provides operator cab
HM315* 246C, 256C, 262C, 272C, 277C,
protection. 287C, 297C, 279C, 289C, 299C
● Heavy-duty bearings extend work tool life. *Requires high flow or high flow XPS option on machine.
Debris barrier recommended.
● Hydraulically operated front hood allows trees
to be cut when opened and allows dense vegeta-
tion to be mulched.
● V-belt drive protects the motor against blockages.
● Rear chain guard protection reduces spread
of material.
● Rigid, robust tempered steel construction pro-
vides fully guarded protection in tough applications.
● Cat XT-3 ES hose, couplings and O-ring face
seals provide superior, leak-free performance and
reliability. All hoses are wrapped with nylon
woven cordura sleeving for added operator pro-
tection. Hydraulic quick disconnects enable fast
tool changes.
● Quick coupler with rugged, opposing edge design
holds the work tool securely and allows the oper-
ator to quickly change from one high performance
Cat Work Tool to another.

3-88 Edition 40
 Work Tools Skid Steer Loaders
● Mulchers Multi Terrain Loaders
Compact Track Loaders

MODEL HM312 HM315

A Overall width 1640 mm 65" 1830 mm 72"
B Working width 1210 mm 48" 1450 mm 57"
C Length 1470 mm 58" 1470 mm 58"
D Overall height 1610 mm 63" 1610 mm 63"
Weight 940 kg 2070 lb 1075 kg 2365 lb
Drive method V-belt drive V-belt drive
Hydraulic motor type Axial piston Axial piston
Optimum hydraulic flow range 120-137 L/min 31-36 gpm 120-137 L/min 31-36 gpm
Optimal hydraulic pressure range 195-350 bar 2828-5075 psi 195-350 bar 2828-5075 psi
Drum speed range 1800-2100 RPM 1800-2100 RPM
Number of teeth 28 34
Maximum diameter of material to be cut 200 mm 8" 200 mm 8"

Edition 40 3-89
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Power Box Rakes
Compact Track Loaders

Features: Cat Power Box Rakes are ideal for clearing and
● A heavy-duty frame, pivot plate and attach- preparing soil in general construction trench restora-
ment plate are featured for reliable operation in tion, golf course construction and athletic field main-
rugged terrain and abusive soil conditions. tenance. They offer the versatility to de-thatch, remove
old lawns and weeds, grade, level, rake, remove debris
● Pure carbide, blunt shaped teeth create a dim- and prepare seedbeds with one work tool. Their angl-
pled subsurface to ensure the best possible seedbed ing ability allows the operator to windrow collected
sub-base fracture pattern. debris for easy pickup and removal. The consistent
● Two-position winged endplates allow close milling action creates an ideal seedbed for great ger-
raking to side walks or foundations. They can mination results, laying the groundwork for a per-
remain parallel, even during angling, for smoother fect lawn. Wet, dry, weedy, hard and rocky soil can be
plowing. dried, flattened, pulverized and conditioned for seed
in one step.
● Convenient, heavy-duty, deep skid-resistant
step and a generous cab allow for easy operator Machine Compatibility
Power Box Rake Model Machine Models
entry and exit.
PR172 216B2, 226B2, 232B2, 236B2,
● Dual independently adjustable gauge wheels 242B2, 247B2, 252B2, 257B2,
allow for skim passes for over-seeding or adjust 246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C
to cut drainage grades.
PR184 216B2, 226B2, 232B2, 236B2,
● Cat XT-3 ES hose, couplings and O-ring face 242B2, 247B2, 252B2, 257B2,
246C, 256C, 262C, 272C, 277C,
seals provide superior, leak-free performance and 287C, 297C, 279C, 289C, 299C
reliability. All hoses are wrapped with nylon PR190 216B2, 226B2, 232B2, 236B2,
woven cordura sleeving for added operator pro- 242B2, 247B2, 252B2, 257B2,
tection. Hydraulic quick disconnects enable fast 246C, 256C, 262C, 272C, 277C,
tool changes. 287C, 297C, 279C, 289C, 299C

● Quick coupler with rugged, opposing edge design

holds the work tool securely and allows the oper-
ator to quickly change from one high performance
Cat Work Tool to another.

3-90 Edition 40
 Work Tools Skid Steer Loaders
● Power Box Rakes Multi Terrain Loaders
Compact Track Loaders

MODEL PR172 PR184 PR190

A Overall width 2057 mm 81" 2362 mm 93" 2515 mm 99"
B Width over tires 1386 mm 55" 1732 mm 68" 1845 mm 73"
C Roller width 1829 mm 72" 2134 mm 84" 2286 mm 90"
D Overall height 847 mm 34" 847 mm 34" 953 mm 38"
E Overall length 1626 mm 64" 1626 mm 64" 1626 mm 64"
Raking width at maximum angle 1727 mm 68" 2007 mm 79" 2159 mm 85"
Unit weight (Manual) 408 kg 900 lb 465 kg 1026 lb 588 kg 1296 lb
Unit weight (Hydraulic) 420 kg 925 lb 476 kg 1050 lb 599 kg 1320 lb
Maximum working angle 20° 20° 20°
Hydraulic flow required 49-83 L/min 13-22 gpm 57-83 L/min 15-22 gpm 58-83 L/min 16-22 gpm

Edition 40 3-91
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Trenchers
Compact Track Loaders

Features: Market Opportunities

● Direct drive system features a variable speed, ● Agriculture — Trenchers provide an effective
bidirectional, gerotor style motor that delivers work tool around the farm or nursery to cut
optimal chain speed, chain pull and torque for max- trenches for water lines, electrical cables and
imum trenching performance in a broad range of other utilities.
soil types. ● Building/General Construction — Trenchers
● Durable double standard anti-backflex chain are often used on construction sites to cut trenches
is standard for strength, durability and long life for plumbing, electrical, telephone and cable tele-
in all soil types. vision lines.
● Standard boom lengths for all-purpose perfor- ● Landscaping/Landscape Maintenance —
mance. Replaceable weld-on wear strips extend Trenchers are popular landscaping work tools
boom life. when installing irrigation and water sprinkler
● Hardfaced, tungsten carbide steel cupped teeth systems. They can also be used to remove roots
are standard for long life in many soil conditions. that grow too close to buildings or cart paths. Land-
Teeth are spaced for optimum digging performance scapers, golf course maintenance departments
in most soil. and irrigation contractors are prime users.

● Hydraulic or manual side-shift on the T6B ● Specialty Trades/Utilities — Trenchers are

and T9B provides close trenching flexibility near excellent work tools for specialty trades and util-
structures or obstructions. ity contractors that need to bury water and gas
pipe, conduit, electrical, telephone and cable tele-
● Hydraulic side-shift on the T15B is controlled vision lines.
from the operator’s compartment using the standard
flow auxiliary hydraulic circuit selector control. Trenchers are productive work tools for special-
ized applications. They are often used in conjunc-
● Optional cutting widths and crumber bars tion with a bucket and auger.
are available for wider trenching requirements
and loose material removal.
● Cat XT-3 hose and O-ring face seals are used
throughout for superior leak-free performance.

3-92 Edition 40
 Work Tools Skid Steer Loaders
● Trenchers Multi Terrain Loaders
Compact Track Loaders

Machine Compatibility T15B Trencher

Trencher Model Machine Models Theoretical Drive Shaft Torque
3
T6B 216B2, 226B2, 232B2, 236B2, Pressure Torque
242B2, 247B2, 252B2, 257B2,
246C, 256C, 262C, 272C, 277C, bar psi N•m lb-ft
287C, 297C 207 3000 1916 1413
T9B 216B2, 226B2, 232B2, 236B2, 214 3100 1981 1461
242B2, 247B2, 252B2, 257B2,
220 3200 2036 1501
246C, 256C, 262C, 272C, 277C,
287C, 297C 227 3300 2101 1549
T15B* 226B2, 242B2, 257B2, 246C, 235 3400 2175 1604
256C, 262C, 272C, 277C, 242 3500 2240 1652
287C, 297C 248 3600 2295 1692
*Requires high flow or high flow XPS option on machine. 255 3700 2360 1740
262 3800 2425 1788
269 3900 2490 1836
T6B/T9B Trencher
276 4000 2555 1884
Theoretical Drive Shaft Torque 283 4100 2619 1931
Pressure Torque 290 4200 2684 1979
bar psi N•m lb-ft 297 4300 2749 2027
145 2100 848 625 304 4400 2814 2075
152 2200 889 655 311 4500 2878 2122
158 2300 924 681
166 2400 971 716
172 2500 1006 741
179 2600 1047 772
186 2700 1088 802
193 2800 1129 832
200 2900 1170 863
207 3000 1211 893
214 3100 1252 923
220 3200 1287 949
227 3300 1328 979

Edition 40 3-93
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Trenchers
Compact Track Loaders

MODEL T6B T9B T15B

A Overall width 1426 mm 56" 1901 mm 74.8" 1901 mm 74.8"
B Overall length 2348 mm 92" 2705 mm 106.5" 3010 mm 118.5"
C Side shift travel (center to right) 419 mm 16.5" 559 mm 22" 559 mm 22"
D Height 786 mm 30.9" 786 mm 30.9" 786 mm 30.9"
Max. auger clearance 534 mm 21" 534 mm 21" 534 mm 21"
Spoil auger diameter 457 mm 18" 457 mm 18" 457 mm 18"
Standard boom length 914 mm 36" 1219 mm 48" 1524 mm 60"
Weight 397 kg* 875 lb* 551 kg** 1215 lb** 601 kg*** 1325 lb***
Required hydraulic flow range 42-83 L/min 11-22 gpm 42-83 L/min 11-22 gpm 95-152 L/min 25-40 gpm
Optimal hydraulic pressure range 145-227 bar 2100-3300 psi 145-227 bar 2100-3300 psi 207-310 bar 3000-4500 psi
Motor size 393.9 cm3 24.0 in3 393.9 cm3 24.0 in3 629.1 cm3 38.4 in3
Theoretical drive shaft torque1 1447 N•m 1068 lb-ft 1447 N•m 1068 lb-ft 2905 N•m 2144 lb-ft
Chain pull @ max. pressure2 1207 kg 2661 lb 1207 kg 2661 lb 2424 kg 5344 lb
Chain speed @ max. flow2 155 m/min 508.5 ft/min 155 m/min 508.5 ft/min 158 m/min 518.3 ft/min
Drive shaft speed @ max. flow2 203 RPM 203 RPM 207 RPM
Optional cutting widths 152, 203, (6", 8", 152, 203, (6", 8", 152, 203, (6", 8",
254, 305 mm 10", 12") 254, 305 mm 10", 12") 254, 305 mm 10", 12")
***T6B bare configuration, no chain.
***T9B equipped with 1219 mm (48") boom, hydraulic side shift control, double standard anti-backflex chain, 203 mm (8") cutting width, 50/50 carbide/cup chain.
***T15B equipped with 1524 mm (60") boom, double standard anti-backflex chain, 203 mm (8") cutting width, 50/50 carbide/cup chain.
1Max. Pressure: T6B, T9B — 230 bar (3335 psi), T15B — 290 bar (4206 psi).
2Max. Flow: T6B, T9B — 80 L/min (21 gpm), T15B — 130 L/min (34 gpm).

3-94 Edition 40
 Work Tools Skid Steer Loaders
● Vibratory Compactors Multi Terrain Loaders
Compact Track Loaders

Features: Market Opportunities

● Caterpillar exclusive vibratory pod design ● Building/General Construction — Vibratory
3
delivers desired balance between frequency and compactors can be used on construction sites to
amplitude to provide a superior matte finish. Pod- level and compact soil around building founda-
style weight housings are factory sealed for longer tions after backfilling.
bearing life and easy serviceability.
● Governmental/Municipalities (Street and Road
● Higher compaction forces provide twice the Maintenance) — Vibratory compactors are use-
compaction force of the original design requiring ful work tools for compacting soil and crushed rock
fewer passes for greater productivity. prior to paving or pouring concrete. They are also
useful for compacting small areas of asphalt (pot-
● Replaceable rubber mounts isolate vibration hole repair).
and enhance vibratory capabilities.
● Landscaping/Landscape Maintenance —
● Durable high-strength steel drums are roll Vibratory compactors are used by landscaping
formed and finish welded for a smoother surface contractors after installing irrigation and water
and longer life. sprinkler systems. Golf course maintenance
● Pivoting interface allows the drum to oscillate departments will often use this product to com-
±15° and follow the contour of the ground. pact greens and fairways.

● Cat XT-3 hose and O-ring face seals are used ● Paving — Vibratory compactors are used by pav-
throughout for superior leak-free performance. ing contractors for smaller paving jobs (compact-
ing soil and crushed stone), compacting hot patch
(pot hole repair) or compacting material in tight
areas where a dedicated roller can’t maneuver.
● Specialty Trades/Utilities — Vibratory com-
pactors are ideal for compacting back-filled soil
after trenching and backhoe work.
Vibratory compactors are productive work
tools for specialized applications. They are often
used in conjunction with a bucket, cold planer and
trencher.
Machine Compatibility
Vibratory Compactor Model Machine Models*
CV16B 216B2*, 226B2*, 232B2*,
236B2*, 242B2*, 247B2*,
252B2, 257B2*, 246C,
256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C,
299C
CV18B 252B2, 246C, 256C, 262C,
272C, 277C, 287C, 297C,
279C, 289C, 299C
*Lift restriction! Do not raise lift arm — work tool coupler interface higher than
1 m (3 ft) above the ground. Tipping can result.

Edition 40 3-95
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Vibratory Compactors
Compact Track Loaders

MODEL CV16B CV18B

A Overall width 1854 mm 73" 2032 mm 80"
B Drum width 1676 mm 66" 1854 mm 73"
C Overall height 634 mm 25" 634 mm 25"
D Overall length 1009 mm 40" 1009 mm 40"
Drum diameter 634 mm 25" 634 mm 25"
Weight 924 kg 2037 lb 965 kg 2127 lb
Drive method Direct drive Direct drive
Number of motors 1 1
Motor size 28.2 cm3 1.72 in3 28.2 cm3 1.72 in3
Hydraulic flow range 42-83 L/min 11-22 gpm 42-83 L/min 11-22 gpm
Hydraulic pressure range 145-227 bar 2100-3300 psi 145-227 bar 2100-3300 psi
Drum oscillation range ±15° ±15°
Drum frequency @ maximum flow 2946 vibrations/min 2946 vibrations/min
Dynamic force 5399 kg 11,903 lb 5399 kg 11,903 lb
Amplitude 1.16 mm 0.046" 1.09 mm 0.043"

3-96 Edition 40
 Work Tools Skid Steer Loaders
● Brooms Multi Terrain Loaders
Compact Track Loaders

Features: ● Demolition — Brooms are ideal for collecting

● Pickup Brooms sweep and deposit material into loose dirt and debris from demolition sites.
3
an integrated hopper bucket for easy removal and ● Governmental/Municipalities (Street and
dumping. Bi-directional capabilities of the bristles Road Maintenance) — Brooms are useful work
allow Pickup and Utility Brooms to sweep in forward tools for cleaning city streets, sidewalks and park-
or reverse machine travel. Optimum sweeping style ing areas. Airport maintenance is another popu-
is in forward travel, resulting in over-the-brush lar application.
pickup. Certain conditions require a dust pan style
of sweeping, done in reverse travel. ● Industrial/Recycling — Pickup brooms are
excellent for cleaning factory floors or industrial
● Utility Brooms sweep and collect light debris on pavements.
smooth surfaces in forward or reverse travel. They
can be adjusted for greater bristle down-force in ● Landscaping/Landscape Maintenance —
tough applications such as sweeping course mate- Brooms are used by landscaping contractors to
rial out of a cold planer cut. clean paved surfaces after the landscaping is com-
plete. Golf course maintenance departments will
● Angle Brooms use a single variable speed, uni- often use this product to clean cart paths, parking
directional gerotor style hydraulic motor, con- lots and even turf.
tained in a protective housing. They use a
windrowing action to move loose debris ahead and ● Paving — Pickup brooms are often used by pav-
to the side of the surface being swept. They can be ing contractors to sweep and collect milled asphalt
oriented straight or angled up to 30° left or right and concrete. Angle brooms are used to clean milled
of center in forward travel. surfaces.
● Direct drive motors provide maximum perfor- ● Specialty Trades/Utilities — Brooms are often
mance and durability. Pickup and Utility Brooms utilized by specialty trades and utility contrac-
use a single variable speed, bidirectional gerotor tors to clean up after trenching and backhoe work.
style hydraulic motor, contained in a special hous-
ing that is adjustable to compensate for bristle wear. Pickup brooms are productive work tools for
Angle brooms use a single variable speed unidi- specialized applications. They are often used in con-
rectional gerotor style hydraulic motor contained junction with a bucket, cold planer and trencher.
in a protective housing. Machine Compatibility
Broom Model Machine Models
● Polypropylene/wire convoluted brushes pro-
vide optimum results for sweeping. Optional all- BP15B 216B2, 226B2, 232B2, 236B2, 242B2,
247B2, 252B2, 257B2, 246C, 256C, 262C,
polypropylene and all-steel wire convoluted brushes 272C, 277C, 287C, 297C, 279C, 289C, 299C
are available for specialty applications. Convoluted BP18B 232B2, 236B2, 242B2, 252B2, 257B2, 246C,
brush sections are available in half-kits for easy 256C, 262C, 272C, 277C, 287C, 297C, 279C,
maintenance and quick replacement. 289C, 299C
BA18 216B2, 226B2, 232B2, 236B2, 242B2,
● Drop core design allows for quick bristle replace- 247B2, 252B2, 257B2, 246C, 256C, 262C,
ment without removing hydraulic hoses. 272C, 277C, 287C, 297C, 279C, 289C, 299C
BU115 216B2, 226B2, 232B2, 236B2, 242B2,
● Quick coupler with rugged, opposing edge design 247B2, 252B2, 257B2, 246C, 256C, 262C,
holds the work tool securely and allows the oper- 272C, 277C, 287C, 297C, 279C, 289C, 299C
ator to quickly change from one high performance BU118 232B2, 236B2, 242B2, 252B2, 257B2, 246C,
Cat Work Tool to another. 256C, 262C, 272C, 277C, 287C, 297C, 279C,
289C, 299C

Market Opportunities
● Building/General Construction — Brooms are
often found on construction sites once the con-
struction is complete to remove and collect dirt,
rock and other construction debris from drive-
ways, sidewalks and streets.

Edition 40 3-97
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Brooms
Compact Track Loaders

Pickup Brooms

Angle Brooms

BP15B BP18B BA18

MODEL Pickup Broom Pickup Broom Angle Broom
A Overall width 1912 mm 75" 2217 mm 87" 2312 mm 91"
AA Overall width angled* — — — — 2328 mm 92"
B Sweeping width 1524 mm 60" 1829 mm 72" 2134 mm 84"
BB Sweeping width angled* — — — — 1702 mm 67"
C Height 754 mm 30" 754 mm 30" 845 mm 33"
D Length 1632 mm 64" 1575 mm 62" 1676 mm 66"
Weight** 435 kg 960 lb 468 kg 1032 lb 409 kg 901 lb
Drive method Direct drive Direct drive Direct drive
Number of motors One Two in-line One
Motor size 250 cm3 15.3 in3 200 cm3 each 12.2 in3 each 410 cm3 24.9 in3
Hydraulic flow range 30-83 L/min 8-22 gpm 30-80 L/min 8-22 gpm 42-83 L/min 11-22 gpm
Hydraulic pressure range 145-227 bar 2100-3300 psi 145-227 bar 2100-3300 psi 145-227 bar 2100-3300 psi
Rated brush speed @
maximum flow 190 RPM 190 RPM 190 RPM
Hopper capacity*** 0.42 m3 0.55 yd3 0.45 m3 0.59 yd3 — —
Fasteners Cat Cat Cat
Hydraulic hose Cat XT-3 ES Cat XT-3 ES Cat XT-3 ES
Brush diameter 660 mm 26" 660 mm 26" 813 mm 32"
Brush head retention Dual chain/ Dual chain/ —
loader arm bracket loader arm bracket
Brush material (standard) Replaceable polypropylene/ Replaceable polypropylene/ Replaceable polypropylene/
steel wire sections steel wire sections steel wire sections
***30° right or left.
***Without gutter brush.
***Rated struck capacities shown as per ISO 7546: 1983 and SAE J742 FEB85.

3-98 Edition 40
 Work Tools Skid Steer Loaders
● Brooms Multi Terrain Loaders
Compact Track Loaders

Utility Brooms

BU115 BU118
MODEL Utility Broom Utility Broom
A Overall width 1810 mm 71" 2115 mm 83"
B Sweeping width 1510 mm 59" 1865 mm 73"
C Height 1920 mm 76" 2225 mm 88"
D Length 1490 mm 59" 1490 mm 59"
Weight 410 kg 904 lb 450 kg 992 lb
Drive method Direct drive Direct drive
Number of motors 1 1
Motor size 393 cm3 24 in3 393 cm3 24 in3
Hydraulic flow range 30-83 L/min 8-22 gpm 30-83 L/min 8-22 gpm
Hydraulic pressure range 145-227 bar 2100-3300 psi 145-227 bar 2100-3300 psi
Rated brush speed @ maximum flow 190 RPM 190 RPM
Hopper capacity* 0.42 m3 0.55 yd3 0.49 m3 0.64 yd3
Fasteners Cat Cat
Hydraulic hose Cat XT-3 ES Cat XT-3 ES
Brush diameter 660 mm 26" 660 mm 26"
Brush material (standard) Replaceable polypropylene sections Replaceable polypropylene sections
Brush material (optional) Replaceable steel wire sections Replaceable steel wire sections
*Rated struck capacities shown as per ISO 7546: 1983 and SAE J742 FEB85.

Edition 40 3-99
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Stump Grinders
Compact Track Loaders

Features: Market Opportunities

● Two direct drive models, the standard flow ● Landscaping/Landscaping Maintenance —
SG16B and the high flow SG18B feature a vari- Stump grinders are ideal for economically remov-
able speed, unidirectional motor that is matched ing tree stumps in residential, commercial and
to the Cat Skid Steer Loader’s auxiliary hydraulic agricultural settings.
horsepower capabilities. Provides high torque for
efficient grinding performance. ● Rental — Stump grinders are a high opportunity
rental work tool for lawn care and for clean up
● Heavy-duty 550 mm (22") cutting wheel and after natural disasters such as tornadoes and hur-
32 bolt-on carbide teeth provide maximum dura- ricanes where many trees are damaged.
bility and cutting efficiency.
Stump grinders are productive work tools for
● Heavy-duty, dual height, pivoting stand feet specialized applications. Maneuverability and com-
provide a stable platform when grinding. pact size compared to tow behind stump grinders
lend it be to very popular in lawn care and golf course
● Standard hydraulic cutting wheel swing (full maintenance.
70 degrees) and extension [279 mm (11 in) max.].
Machine Compatibility
● Hydraulic depth control on SG18B, depth Stump Grinder Model Machine Models
control on SG16B is manually adjustable using
SG16B 216B2, 226B2, 232B2, 236B2,
a 3-position depth control bar. 242B2, 247B2, 252B2, 257B2,
246C, 256C, 262C, 272C, 277C,
● Extension slider rods are chrome plated for long 287C, 297C, 279C, 289C, 299C
life. SG18B* 246C, 256C, 262C, 272C, 277C,
287C, 297C, 279C, 289C, 299C
● Cat XT-3 and medium pressure hose, couplings
and O-Rings. *Requires high flow or high flow XPS option on machine.

3-100 Edition 40
 Work Tools Skid Steer Loaders
● Stump Grinders Multi Terrain Loaders
Compact Track Loaders

B A

MODEL SG16B SG18B

A Overall width 1175 mm 46" 1175 mm 46"
B Overall length 1737 mm 69" 1737 mm 69"
C Overall height 730 mm 30" 813 mm 32"
Unit weight 379 kg 775 lb 400 kg 840 lb
Drive method Gerotor Motor — Direct Gerotor Motor — Direct
Required hydraulic flow 42-83 L/min 11-22 gpm 95-114 L/min 25-30 gpm
Optimal hydraulic pressure 145-227 bar 2100-3300 psi 207-310 bar 3000-4500 psi
Effective displacement 80 cm3 4.9 in3 100 cm3 6.2 in3
Drive shaft torque @ maximum pressure 295 N•m @ 218 lb-ft @ 469 N•m @ 346 lb-ft @
230 bar 3336 psi 290 bar 4206 psi
Cutting head speed (drive shaft) @ 993 RPM @ 993 RPM @ 1280 RPM @ 1280 RPM @
maximum flow 80 L/min 21 gpm 130 L/min 34 gpm
Cutting wheel width (with teeth) 83 mm 3.3" 83 mm 3.3"
Cutting wheel diameter (with teeth) 550 mm 22" 550 mm 22"
Cutting width (full swing range) 1524 mm 60" 1524 mm 60"
Cutting head swing range 70° 70°
Cutting height (above ground) 470 mm 18.5" 470 mm 18.5"
Cutting height (below ground) 547 mm 21.5" 547 mm 21.5"
Cutting head extension 280 mm 11" 280 mm 11"
Fasteners Cat Cat
Hydraulic hose XT-3 ES, medium pressure XT-6 ES, medium pressure
Ground Engaging Tools (GET) 12.7 mm (1⁄2") square 12.7 mm (1⁄2") square
bolt-on carbide teeth bolt-on carbide teeth
Number of carbide teeth per cutting wheel 32 32

Edition 40 3-101
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Stump Grinders
Compact Track Loaders

SG16B Stump Grinder SG18B Stump Grinder

Theoretical Drive Shaft Torque Theoretical Drive Shaft Torque
Pressure Torque Pressure Torque
bar psi N•m lb-ft bar psi N•m lb-ft
145 2100 186 137 207 3000 336 247
152 2200 194 143 214 3100 347 255
158 2300 204 150 221 3200 358 263
166 2400 212 156 227 3300 370 272
172 2500 222 163 234 3400 381 280
179 2600 230 169 241 3500 392 288
186 2700 239 176 248 3600 403 296
193 2800 248 182 255 3700 413 304
200 2900 257 189 262 3800 426 313
207 3000 265 195 269 3900 437 321
214 3100 275 202 276 4000 447 329
220 3200 283 208 282 4100 458 337
227 3300 292 215 289 4200 471 346
296 4300 481 354
303 4400 492 362
310 4500 503 370

SG16B Stump Grinder SG18B Stump Grinder

Theoretical Cutting Head Speed (Drive Shaft) Theoretical Cutting Head Speed (Drive Shaft)
Flow Cutting Head Speed Flow Cutting Head Speed
L/min gpm RPM L/min gpm RPM
42 11 519 95 25 931
45 12 566 99 26 969
49 13 613 102 27 1006
53 14 660 106 28 1043
57 15 707 110 29 1080
61 16 754 114 30 1118
64 17 801 118 31 1155
68 18 849 122 32 1192
72 19 896 125 33 1230
76 20 943
80 21 990
83 22 1037

3-102 Edition 40
 Work Tools Skid Steer Loaders
● Angle Blades Multi Terrain Loaders
Compact Track Loaders

A B

A Overall width (straight)* 1829 mm 72" 2134 mm 84"

B Working width, fully angled 1685 mm 66" 1949 mm 78"
C Height 614 mm 24" 614 mm 24"
D Length 753 mm 30" 753 mm 30"
Weight 313 kg 690 lb 331 kg 730 lb
Adjustable cutting depth (three positions
— 25.4 mm (1") increments) 0, 25 and 51 mm 0", 1" and 2" 0, 25 and 51 mm 0", 1" and 2"
Maximum blade angle —
(right or left of center) 30° 30°
Maximum blade trip angle 60° 60°
*Measured from moldboard edges; overall width is approximately 50 mm (2") wider with bolt-on edge.

Edition 40 3-103
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Backhoes
Compact Track Loaders

135 mm
(5 in)

260 mm
(10 in)

610 mm
(2 ft)
2438 mm
(8 ft)

MODEL BH150 BH160

Operational Specifications
A Digging depth maximum 3074 mm 121" 3074 mm 121"
B Digging depth 0.61 m (2') flat bottom 3040 mm 120" 3040 mm 120"
C Digging depth 2.44 m (8') flat bottom 2593 mm 102" 2593 mm 102"
D Straight wall digging depth 2064 mm 81" 2064 mm 81"
E Overall operating height 3442 mm 136" 3442 mm 136"
F Loading height 2147 mm 85" 2147 mm 85"
G Loading reach 1628 mm 64" 1628 mm 64"
H Reach from swing pivot 3955 mm 156" 3955 mm 156"
K Overall length 2776 mm 109" 2936 mm 116"
Side shift length 822 mm 32" 974 mm 38"
Swing arc 180° 180°
Bucket rotation 192° 192°
Bucket breakout force 3241 kg 7146 lb 3241 kg 7146 lb
Stick breakout force 1560 kg 3439 lb 1560 kg 3439 lb
Transport Dimensions
L Transport height 2336 mm 92" 2336 mm 92"
N Boom pivot height 425 mm 17" 425 mm 17"
Ground clearance 85.7 mm 3.4" 85.7 mm 3.4"
Operating weight 1023 kg 2256 lb 1047 kg 2309 lb

3-104 Edition 40
 Work Tools Skid Steer Loaders
● Material Handling Arm Multi Terrain Loaders
Compact Track Loaders

C A
3

E
D

A Width with side step 1309 mm 52"

B Height 1473 mm 58"
C Length 1016 mm 40"
D Load length (end point) 768 mm 30"
E Load length (mid point) 311 mm 12"
Rated structural capacity* 907 kg 2000 lb
Maximum reach (horizontal)** 2134 mm 84"
Weight 127 kg 280 lb
**Rated structural capacity is the maximum load that can be carried by the work tool and does not imply that the specific host machine has the tipping capacity to lift the
load. Refer to the Cat Skid Steer Loader and Multi Terrain Loader Operation and Maintenance Manual (OMM) for Cat Skid Steer Loader and Multi Terrain Loader rated
operating capacity with Material Handling Arm.
**Maximum horizontal reach is measured from the front tire with the loader arms approximately 1.5 m (5') off the ground and work tool tilted forward approximately
68 degrees at the end point.

Edition 40 3-105
 Skid Steer Loaders Work Tools
Multi Terrain Loaders ● Snow Blowers
Compact Track Loaders

A
B E

MODEL SR117 SR118 SR121

A Intake width 1702 mm 67" 1854 mm 73" 2159 mm 85"
B Overall width 1765 mm 69.5" 1918 mm 75.5" 2223 mm 87.5"
C Cutting height 609.6 mm 24" 812.8 mm 32" 914.4 mm 36"
D Overall height 1582 mm 62.3" 1582 mm 62.3" 1735 mm 68.3"
E Overall length 1148 mm 45.2" 1209 mm 47.6" 1440 mm 56.7"
Weight 404.5 kg 890 lb 450 kg 990 lb 555 kg 1220 lb
Maximum throw distance* 9.1 m 30'0" 12.2 m 40'0" 12.2 m 40'0"
Auger diameter 305 mm 12" 406 mm 16" 457 mm 18"
Impeller/fan diameter 517 mm 20" 517 mm 20" 679 mm 27"
Chute rotation 180° 180° 180°
Required hydraulic flow 53-76 L/min 14-20 gpm 68-83 L/min 18-22 gpm 72-87 L/min 19-23 gpm

MODEL SR318 SR321

A Intake width 1584 mm 73" 2159 mm 85"
B Overall width 1918 mm 75.5" 2223 mm 87.5"
C Cutting height 812 mm 32" 915 mm 36"
D Overall height 1582 mm 62.3" 1735 mm 68.3"
E Overall length 1209 mm 47.6" 1440 mm 56.7"
Weight 450 kg 990 lb 555 kg 1220 lb
Maximum throw distance* 13.7 m 45'0" 13.7 m 45'0"
Auger diameter 406 mm 16" 457 mm 18"
Impeller/fan diameter 517 mm 20" 679 mm 27"
Chute rotation 180° 180°
Required hydraulic flow 98-130 L/min 26-34 gpm 98-130 L/min 26-34 gpm
*Theoretical values calculated at 100% efficiency.

3-106 Edition 40
 Work Tools Skid Steer Loaders
● Wheel Saws Multi Terrain Loaders
Compact Track Loaders

A
3

B D

SW45 SW45 SW45 SW60 SW60

MODEL 80 mm (3") 160 mm (6") 200 mm (8") 160 mm (6") 200 mm (8")
A Overall width 1803 mm 71" 1803 mm 71" 1803 mm 71" 1866 mm 74" 1866 mm 74"
B Maximum wheel width 80 mm 3" 160 mm 6" 200 mm 8" 160 mm 6" 200 mm 8"
C Overall height 1440 mm 57" 1435 mm 56" 1435 mm 56" 1746 mm 69" 1746 mm 69"
D Length 1992 mm 78" 1992 mm 78" 1992 mm 78" 2230 mm 88" 2230 mm 88"
Weight 1004 kg 2213 lb 932 kg 2054 lb 961 kg 2118 lb 1169 kg 2577 lb 1192 kg 2628 lb
Trench cleaning device No Yes Yes Yes Yes
Drive method Piston motor/ Piston motor/ Piston motor/ Piston motor/ Piston motor/
Planetary Planetary Planetary Planetary Planetary
Required hydraulic 90- 24- 90- 24- 90- 24- 100- 26- 100- 26-
flow range 160 L/min 42 gpm 160 L/min 42 gpm 160 L/min 42 gpm 160 L/min 42 gpm 160 L/min 42 gpm
Optimal hydraulic 180- 2611- 180- 2611- 180- 2611- 180- 2611- 180- 2611-
pressure range 300 bar 4351 psi 300 bar 4351 psi 300 bar 4351 psi 300 bar 4351 psi 300 bar 4351 psi
Wheel torque @ 1131 832 1429 1051 1429 1051 1429 1051 1429 1051
maximum pressure N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft N•m lb-ft
Wheel speed @
maximum flow 267 RPM 212 RPM 212 RPM 212 RPM 212 RPM
Bit speed @ 395 1295 313 1026 313 1026 313 1026 313 1026
maximum flow m/min ft/min m/min ft/min m/min ft/min m/min ft/min m/min ft/min
Conical bits 64 per wheel 56 per wheel 62 per wheel 96 per wheel 96 per wheel
Standard bit type Concrete Concrete Concrete Concrete Concrete
Optional bit type All purpose All purpose All purpose All purpose All purpose
Maximum depth of cut 450 mm 18" 450 mm 18" 450 mm 18" 600 mm 24" 600 mm 24"
Sideshift travel 650 mm 26" 650 mm 26" 650 mm 26" 650 mm 26" 650 mm 26"

Edition 40 3-107
Notes —

3-108 Edition 40