XMLBM02V2S12 Document
XMLBM02V2S12 Document
Main
Range of produc Telemecanique Pressure sensors XM
Product or component Electromechanical pressure sensor
type
Pressure sensor type Electromechanical vacuum sensor
Device short name XMLB
Pressure rating -1 bar
Controlled fluid Air (0…70 °C)
Fresh water (0…70 °C)
Hydraulic oil (0…70 °C)
Fluid connection type G 1/4 (female) conforming to ISO 228
Electrical connection Screw-clamps terminals, 1 x 0.5...2 x 2.5 mm²
AWG gauge AWG 20...AWG 14
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Cable entry Cable gland 7…13 mm
Contacts type and 1 C/O
composition
Product specific -
application
Pressure switch type of Regulation between 2 thresholds
operation
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
Electrical circuit type Control circuit
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Scale type Adjustable differential
Local display With
Adjustable range of -0.87…-0.01 bar
switching point on rising
pressure
Neither TMSS Holding nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Adjustable range of -1…-0.14 bar
switching point on falling
pressure
Possible differential 0.8 bar
maximum at high setting
Maximum permissible 9 bar
accidental pressure
Destruction pressure 18 bar
Pressure actuator Diaphragm
Materials in contact with Zinc alloy
fluid Nitrile
304L stainless steel
Enclosure material Zinc alloy
[In] rated current 3 A, B300, AC-15 (Ue = 120 V) conforming to IEC
60947-5-1
1.5 A, B300, AC-15 (Ue = 240 V) conforming to IEC
60947-5-1
0.1 A, R300, DC-13 (Ue = 250 V) conforming to IEC
60947-5-1
Complementary
Possible differential minimum at low setting 0.13 bar (+/- 0.02 bar)
Possible differential minimum at high setting 0.13 bar (+/- 0.02 bar)
Maximum permissible pressure - per cycle 5 bar
Terminal block type 4 terminals
Maximum operating rate 120 cyc/mn
Repeat accuracy 2%
Environment
Standards IEC 60947-5-1
CE
CSA C22.2 No 14
UL 508
Product certifications LROS (Lloyds register of shipping)
[RETURN]CCC[RETURN]CSA[RETURN]UL[RETURN]BV
Protective treatment TC standard version
Ambient air temperature for operation -25…70 °C
Ambient air temperature for storage -40…70 °C
Operating position Any position
Vibration resistance 4 gn conforming to IEC 60068-2-6 (f = 30…500 Hz)
Shock resistance 50 gn conforming to IEC 60068-2-27
Electrical shock protection class Class I conforming to IEC 1140
Class I conforming to IEC 536
Class I conforming to NF C 20-030
IP degree of protection IP66 conforming to IEC 60529
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 6.0 cm
Package 1 Width 14.5 cm
Package 1 Length 8.0 cm
Package 1 Weight 1.042 kg
Offer Sustainability
Sustainable offer status Green Premium product
Environmental Disclosure
Product Environmental Profile
Circularity Profile No need of specific recycling operations
California proposition 65 WARNING: This product can expose you to chemicals including: Diisononyl
phthalate (DINP), which is known to the State of California to cause cancer,
and Di-isodecyl phthalate (DIDP), which is known to the State of California
to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
For all Reach Rohs enquiries contact us at [email protected]
Contractual warranty
Warranty 18 months
2
Product data sheet XMLBM02V2S12
Dimensions Drawings
Dimensions
3
Product data sheet XMLBM02V2S12
Connections and Schema
Wiring Diagram
Terminal Model
4
Product data sheet XMLBM02V2S12
Performance Curves
Operating Curves
(x) Time
(y) Vacuum
(1) Adjustable value
PH : High point
PB : Below point