Scribd
Upload
66 views

User Manual (English)

Uploaded by

koca
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
66 views

User Manual (English)

Uploaded by

koca
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

ENSHINE Smart Bulb

User Manual
CAUTION
USE IN DRY LOCATIONS. RISK OF ELECTRIC SHOCK OR BURNS
For indoor use only.
Do not install the device with wet hands or when standing on
wet or damp surfaces.
Not for use in totally half or fully enclosed luminaires,
especially luminaires with metal shade, which may distort
the signal and make it harder to connect or control the lights
Do not use with Dimmers!

GET READY
iOS 10.0 & up

Android 4.4& up

2.4Ghz
01
Instruc�on video

Customer Service
Amazon messaging service
.....................................................................................................................

1.Search for ENSHINE amazon.co.uk


ENSHINE
.....................................................................................................................
2. Find our store
( click any of ENSHINE product detail page)
Sold by Enshine lighting and Fulfilled by Amazon.
.....................................................................................................................

3. Tap Ask a ques�on Have a question for Ask a


Enshine lighting? ques�on
.....................................................................................................................

Email: support@enshineligh�ng.com
WhatsApp: +86-13385928198
h�ps: //enshinehome.com/support/
02
1.Download the ‘Smart Life’ App.
Register or log in if you already have an account

2.Add device
**If the light won’t blink slowly or quickly, turn it off/on
10 �mes with intervals of at least 2s to reset it**
Connect via Bluetooth
(ONE at a �me）

03
Connect via Bluetooth
(ONE at a �me）

ENSHINE

04
Connect via WIFI
EZ MODE (one and more at a �me)
Disable Bluetooth on the phone

1
2

Select Ligh�ng Enter your


Tap “+” symbol
==> Ligh�ng source(Wi-Fi) Wi-Fi password

05
Connect via WIFI
EZ MODE (one and more at a �me)
Disable Bluetooth on the phone

Reset the bulb then The app will try to


confirm and Tap ‘Next’ connect the smart bulbs
06
Connect via WIFI
AP MODE (ONE at a �me)
Disable Bluetooth on the phone

AP Mode

Choose AP Mode Tap ‘go to connect’


07
Connect via WIFI
AP MODE (ONE at a �me)
Disable Bluetooth on the phone

Connect to the Go back to the smart life app, and it


smartLife-xxx network will try to connect the bulb
08
Group Control
1. Tap a smart bulb in 2. Tap the edit icon 3. Click ' Create Group '
the device list to enter
the its control panel.

09
Group Control
4. Select devices for 5. Tape ‘confirm’ to complete the setup.
unified management.

Now, you can use group control to control mul�ple bulbs

10
Alexa Se�ngs
Enable the Smart Life skills in the Alexa APP, then log in your Smart
Life account, it will automa�cally sync your smart bulb to Alexa.

A�er the synchroniza�on is successful, you can use voice


commands to control your smart bulbs.

11
Google Assistant Se�ngs
Tap ‘Add’ - ‘Set up device’ - ‘Have something already set up?’ -
search for ‘Smart Life’ to add it and log in your smart life account.

12
Frequently Asked Ques�ons
1. What should I do when my device fails to connect to
the network?
--Check whether the router password you entered is correct.

--Ensure that broadcas�ng is enabled for Wi-Fi and is not hidden.


Ensure that your device has been added over a Wi-Fi band of 2.4
GHz. (Check whether the 2.4 GHz band and 5GHz band share the
same Wi-Fi account. If so, we recommend that you configure two
accounts and switch to the 2.4 GHz band during network
connec�on.)

--Ensure that the network environment has strong and stable


signals. Troubleshoo�ng: Place your mobile phone or iPad
connected to the same local area network close to the device,
and open a web page to check whether the browsing is smooth
and stable.

--If the network is normal but the device network connec�on s�ll
fails, check whether the router is overloaded. You can disable a
device's Wi-Fi feature to reserve the channel for resource
realloca�on.

--If wireless MAC address filtering is enabled for the router,


remove your device from the router’s MAC address filtering list
to ensure that it is allowed to connect to the network. You can
also disable MAC address filtering.

If your device s�ll fails to connect to the network a�er the


preceding steps, please contact support@enshineligh�ng.com to
let us troubleshoot this issue
13
2. The light changed from flashing to regular, but it s�ll
fails to connect?
--Please check if the Wi-Fi password you entered during network
configura�on is correct.

--Please keep the distance to the router during the network


configura�on (within 1 ~ 5 meters, there must be no metal
spacers in the middle)

--The smart device that your router's CPU can load has reached
the upper limit. Please disconnect some devices and try again.

--The device does not reset a�er the network configura�on fails.
You can try the network configura�on again a�er the device is
reset.

3. My smart bulb was disconnected, how can I reset it?


EZ Mode:

--Make sure the device is powered off for more than 10 seconds


before powering on the device.
--Turn on and off three �mes (on-off-on-off-on) power of the
device (2 to 4 seconds between each on and off). Wait a few
moments un�l the ligh�ng starts blinking rapidly.

AP Mode:

--No need to power down the device, but need to keep the
ligh�ng device blinking rapidly. Then turn on and off three �mes
(on-off-on-off-on) power of the device (2 to 4 seconds between
each on and off). Wait a few moments un�l the ligh�ng starts
blinking slowly.
14
4. How to configure separate WI-FI SSIDs for 2.4GHz and
5GHz?
If your router supports both the 2.4 GHz and 5 GHz bands, but
only one Wi-Fi name is displayed on the Wi-Fi search page of
your mobile phone, perform these steps:

--Go to the Wireless page of the router. (The entry address is


usually provided on the label a�ached to the back of the router).

--Go to the 2.4 GHz se�ng page, and set the Wi-Fi name (SSID) to
（XXX）-2.4G, where xxx indicates the Wi-Fi name. Save se�ng.

--Go to the 5 GHz se�ng page, and set the Wi-Fi name (SSID) to
（XXX）-5G, where xxx indicates the Wi-Fi name. Save se�ng.

--When the preceding se�ngs are complete, the new Wi-Fi


names will appear on the Wi-Fi se�ngs page of your mobile
phone.

Note: A�er the Wi-Fi names are changed, you need to reconnect
the devices that use this wireless router. The password remains
the same if it has not been changed.

To configure the routers of some popular brands like Netgear,


ASUS, D-LINK-TP-LINK, please visit FAQ & Feedback on the app
for more informa�on.

5. If my Wi-Fi/Internet goes down, will ENSHINE smart


bulbs s�ll work?
ENSHINE products need to be connected to Wi-Fi in order to use
them remotely.
15
6. Can I share with family and friends?

Yes, you can share your bulbs with family and friends who will
have access to control your bulbs. In the Smart Life app, press the
Profile bu�on and click on the ‘Share Device’ bu�on, and you will
be able to give or revoke sharing permissions.In order to share,
the other user should already have downloaded the Smart Life
app and registered a new account.

7. The bulb appears offline or unreachable, what should


I do?
Check the light switch and make sure that it is switched ON. The
light bulb requires an ‘always-on’ power supply to operate
properly. Make sure your Wi-Fi router is online and in range.
When you change the Wi-Fi password, the bulb will disconnect,
you can turn on-off 10 �mes to reset and reconnect it.

8. What’s the Wireless Range?

The range of your home Wi-Fi is heavily dependent on your


home router and the condi�ons of the room. Check with your
router specifica�ons for exact range data.

16

You might also like