Compact cylinders ADN/AEN, to ISO 21287

e Festo Core Range With the Festo Core Range, we have selected
Solves the majority of your automation tasks the most important products and functions
from our broad product catalogue, and added Just look
the quickest delivery. for the
star!
Worldwide: Quickest delivery – wherever, whenever The Core Range offers you the best value
Simply good: Expected high Festo quality for your automation tasks.
Fast: Easy and fast to select
Compact cylinders ADN/AEN, to ISO 21287

Key features
At a glance

Sensor slots on three sides for

flush mounting of proximity
sensors Centring hole in the end cap matches
centring pins ZBS

Magnet for contactless position

sensing

Piston rod with choice of male or

female thread
Integrated cushioning for
Mounting option: absorbing residual energy
Female thread and through-hole

More than the standard Powerful Convenient Reliable

• The compact cylinder series ADN/ • Integrated cushioning for ­absorbing • Easy to mount with a comprehensive • Optimised manufacturing methods,
AEN comply with the standard residual energy range of mounting accessories for patented technology and more than
ISO 21287 • Long service life thanks to excep- just about every type of installation 40 years of experience in the field of
• The ADN/AEN is characterised by its tional cushioning characteristics • Highly flexible thanks to the wide cylinders make Festo and ADN/AEN
compact design and broad area of and minimal friction factors range of variants a great team
application thanks to the large • Contactless position sensing using
number of variants proximity sensors
• The variants can be configured ac-
cording to individual needs thanks
to the modular product system

Cushioning types Cushioning capacity of ISO 21287 and ISO 15552

Cushioning P Cushioning PPS
Mode of operation Mode of operation In terms of cushioning capacity, the
• The drive has elastic polymer • The drive has self-adjusting, pneu- compact cylinder ADN-...-PPS fills the
end-position cushioning matic end-position cushioning gap between ADN-...-P and stand-
ards-based cylinders with ISO 15552.
Application Application
ISO 15552
• Small loads • Larger loads
• Low speeds • Higher speeds
• Small cushioning capacity • Larger cushioning capacity
ADN- ... -PPS
Advantages Advantages
• No adjustment required • No adjustment required
• Saves time • Up to 4 times bigger cushioning ADN- ... -P
capacity than ADN-...-P
• Saves time
• Reduced noise

For manufacturing lithium-ion batteries

ADN-...-F1A Accessories
Recommended for production facilities for the manufacture of lithium-ion Your Festo contact partner can provide information about which accessories are
batteries. suitable for manufacturing lithium-ion batteries.
Metals with copper, zinc or nickel as the main constituent are excluded from use.
Exceptions are nickel in steels, chemically nickel-plated surfaces, printed circuit
boards, cables, electrical plug connectors and coils.

2 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Key features
Variants from the modular product system
Symbol Key features Description

F1A Recommended for production plants for Cylinders free of copper, zinc and nickel (š 1%)
manufacturing lithium-ion batteries

S1 Reinforced piston rod Increased lateral loads. Absorbs many times more lateral load than a basic cylinder

S2 Through piston rod The piston rod can be used for attachments at both ends of the cylinder

S6 Heat-resistant seals Temperature resistance up to max. 120°C

S10 Constant motion (slow speed) at low • Break-away pressure: very low
piston speeds • Dynamic response: Suitable for very slow, constant and stick-slip-free movements
Application example: Slow, constant feed motion

S11 Low friction • Break-away pressure: very low

• Dynamic response: Especially suitable for slow movements with considerably reduced
system friction
• Application example: Slow applications where standstill is critical

S20 Through, hollow piston rod The piston rod can be used for attachments at both ends of the cylinder. The piston rod is
hollow inside. This means it can be used to carry vacuum or compressed air

K2 Extended male piston –

rod thread

K5 Special piston rod thread Metric standard thread to ISO

K8 Extended piston rod –

K10 Smooth anodised aluminium ­piston rod Ideal for use in welding environments:
• Protection against welding spatter
• Small working loads
• Harder surface compared to steel
• Long service life

KP With clamping unit Integrated clamping unit on the piston rod

EL With end-position locking Positive locking in the end position as a drop guard. If there is a drop in pressure, the
cylinder is secured in its end position to prevent it from dropping

Q Square piston rod Protection against rotation. For correctly oriented feeding

R3 High corrosion protection All external cylinder surfaces comply with corrosion resistance class 3 to Festo standard
940070. The piston rod is made from corrosion- and acid-resistant steel

R8 Dust protection with wiper seal The cylinder has a hard-chrome-plated piston rod and a hard wiper seal, which protects
against dry, dusty media

TL Captive rating plate Laser-etched rating plate. For easy identification of components when it comes to
replacement, even after years in a harsh environment

TT Low temperature Temperature resistance down to max. –40°C

F1A Recommended for production plants for Cylinders free of copper, zinc and nickel (š 1%)
manufacturing lithium-ion batteries

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 3

Compact cylinders ADN, to ISO 21287

Product range overview

Function Design Type Piston @ Stroke Position Recom- Cushioning
sensing mended for Fixed Self-adjust-
production ing
plants for
manufactur-
ing
lithium-ion
batteries

[mm] [mm] A F1A P PPS

Double- Basic version
acting ADN 12 5, 10, 15, 20, 25, 30, 40 1 ... 300
16 5, 10, 15, 20, 25, 30, 40, 50 1 ... 300
20, 25 5, 10, 15, 20, 25, 30, 40, 50, 60 1 ... 300 h
32, 40, 50 5, 10, 15, 20, 25, 30, 40, 50, 60, 80 1 ... 400 h h h @ 20
63 10, 15, 20, 25, 30, 40, 50, 60, 80 1 ... 400 ... 100
80, 100 10, 15, 20, 25, 30, 40, 50, 60, 80 1 ... 500
125 – 1 ... 500
ADN-...-S2 12, 16, 20, 25 – 1 ... 300 h
Through ­piston rod 32, 40, 50, 63 – 1 ... 400 h h h @ 20
80, 100, 125 – 1 ... 500 ... 100
ADN-...-S20 16, 20, 25 – 1 ... 300
Through, hollow 32, 40, 50, 63 – 1 ... 400
h
h – h @ 20
piston rod 80, 100, 125 – 1 ... 500
... 100

Reinforced piston rod

ADN-...-S1 25 – 5 ... 300
40, 63 – 10 ... 400 h – h –
100 – 10 ... 500

Non-rotating with square piston rod

ADN-...-Q 12, 16, 20, 25 – 1 ... 300
32, 40, 50, 63 – 1 ... 400 h – h –
80, 100, 125 – 1 ... 500
ADN-...-Q-S2 12, 16, 20, 25 – 1 ... 300
Through ­piston rod 32, 40, 50, 63 – 1 ... 400 h – h –
80, 100, 125 – 1 ... 500
ADN-...-Q-S20 16, 20, 25 – 1 ... 200
Through, hollow 32, 40, 50, 63 – 1 ... 300 h – h –
piston rod 80, 100, 125 – 1 ... 400

Standard hole pattern, with clamping unit

ADN-...-KP 20, 25 – 10 ... 300
32, 40, 50, 63 – 10 ... 400 h – h –
80, 100 – 10 ... 500

Standard hole pattern, with end-position locking

ADN-...-EL 20, 25 – 10 ... 300
32, 40, 50, 63 – 10 ... 400 h – h –
80, 100 – 10 ... 500

4 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Product range overview

Type a Page/Internet

Extended male piston rod thread

Slow speed (constant motion)

Smooth anodised piston rod

High corrosion protection

Female piston rod thread
Male piston rod thread

Extended piston rod

Heat-resistant seals

Low temperature
Dust protection
Special piston

max. 120°C

Low friction
A I K2 rod thread
K5 K8 K10 S6 S10 S11 R3 R8 TT
Basic version
ADN 13

h
h h
h h h h h h h h h @ 20
from @ 20 from @ 20
... 100

ADN-...-S2 h 13
Through piston rod h h h h h – h – – – – @ 20
... 100
ADN-...-S20 13
Through, hollow
piston rod h – h h h – h – – – – –

Reinforced piston rod

ADN-...-S1 13
h h h h h – h – – h – –

Non-rotating with square piston rod

ADN-...-Q 13
h h h h h – h – – – – –

ADN-...-Q-S2 13
Through piston rod h h h h h – h – – – – –

ADN-...-Q-S20 13
Through, hollow h – h h h – h – – – – –
piston rod

Standard hole pattern, with clamping unit

ADN-...-KP 40
h h h h h – – – – – – –

Standard hole pattern, with end-position locking

ADN-...-EL – – – – – – – 49
h h h h h

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 5

Compact cylinders ADN, to ISO 21287

Product range overview

Function Design Type Piston @ Stroke Position Cushioning
sensing Fixed Self-adjust-
ing

[mm] [mm] A P PPS

Double- Standard hole pattern, non-rotating with yoke
acting ADNGF 12 5, 10, 15, 20, 25, 30, 40 1 ... 200
16 5, 10, 15, 20, 25, 30, 40, 50 1 ... 200
20, 25 5, 10, 15, 20, 25, 30, 40, 50, 60 3 ... 200
h
h h @ 20
32, 40, 50 5, 10, 15, 20, 25, 30, 40, 50, 60, 80 5 ... 300
... 100
63, 80 10, 15, 20, 25, 30, 40, 50, 60, 80 5 ... 300
100 10, 15, 20, 25, 30, 40, 50, 60, 80 5 ... 400
ADNGF-...-S2 12, 16 – 1 ... 200
20, 25 3 ... 200
h
Through ­piston rod
h h @ 20
32, 40, 50, 63, 5 ... 250
... 100
80, 100

Standard hole pattern, high-force cylinder

ADNH 25 – 1 ... 150
40
h h –
63
100

Standard hole pattern, multi-position cylinder

ADNM 25 – 1 ... 2000
40
h h –
63
100

6 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Product range overview

Type a Page/Internet

Heat-resistant seals max.

Extended piston rod
Female piston rod

piston rod thread

Male piston rod

Extended male

Special piston
rod thread
thread

thread

120°C
A I K2 K5 K8 S6
Standard hole pattern, non-rotating with yoke
ADNGF adngf

– – – – – h

ADNGF-...-S2 adngf
Through piston rod
– – – – – h

Standard hole pattern, high-force cylinder

ADNH adnh

h h h h h h

Standard hole pattern, multi-position cylinder

ADNM adnh

h h h h h h

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 7

Compact cylinders AEN, to ISO 21287

Product range overview

Function Design Type Piston @ Stroke Position sensing Cushioning

[mm] [mm] A P
Single- Basic version
acting AEN 12 1 ... 10
16, 20, 25, 32, 40, 50, 63, 1 ... 25
80, 100 h h

AEN-...-Z 12 1 ... 10
Pulling 16, 20, 25, 32, 40, 50, 63, 1 ... 25
80, 100 h h

Non-rotating with square piston rod

AEN-...-Q 16 1 ... 25
20, 25, 32, 40, 50, 63, 80, 1 ... 25
100 h h

8 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders AEN, to ISO 21287

Product range overview

Type a Page/Internet

Extended male piston rod

Heat-resistant seals max.

Smooth anodised piston
Extended piston rod
Female piston rod
Male piston rod

Special piston
rod thread
thread

thread

thread

120°C
rod
A I K2 K5 K8 K10 S6
Basic version
AEN 59
h
h h h h h h
from @ 20

AEN-...-Z 59
Pulling h
h h h h h h
from @ 20

Non-rotating with square piston rod

AEN-...-Q 59

h h h h h – h

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 9

Compact cylinders ADN/AEN, to ISO 21287

Peripherals overview

10 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN/AEN, to ISO 21287

Peripherals overview
Mounting components and accessories
Description a Page/Internet
[1] Compact cylinder Double-acting cylinder 13
ADN
Compact cylinder Single-acting cylinder 59
AEN
[2] One-way flow control valve For speed regulation 83
GRLA/GRLZ
[3] Push-in fitting For connecting compressed air tubing with standard O.D. qs
QS
[4] Foot mounting For bearing or end caps 72
HNA
[5] Flange mounting For bearing or end caps 73
FNC
[6] Trunnion flange For bearing caps 80
ZNCF/CRZNG
[7] Trunnion support For trunnion flange ZNCF/CRZNG 81
LNZG
[8] Swivel flange For end caps 74
SNCL/SNCL-...-R3
[9] Multi-position kit For connecting two cylinders with identical piston diameters to form a multi-position cylinder 77
DPNA
[10] Swivel flange For end caps 75
SNCS/CRSNCS/SNCS-...-R3
[11] Swivel flange For swivel flange SNCL 79
SNCB/SNCB-...-R3
[12] Clevis foot For swivel flange SNCL 78
LBN/CRLBN
[13] Clevis foot For swivel flange SNCS 76
LBG/LBG-...-R3
[14] Proximity sensor Can be integrated in the cylinder profile barrel 85
SME-8
[15] Proximity sensor Can be integrated in the cylinder profile barrel 85
SME/SMT-8M
[16] Proximity sensor Inserted in the slot lengthwise 85
SMT-8G
[17] Slot cover For protecting the sensor cables and the sensor slots from contamination 85
ABP-5-S
[18] Proximity sensor Pneumatic output signal 85
SMPO-8E
[19] Mounting kit For proximity sensor SMPO-8E 85
SMB-8E
[20] Self-aligning rod coupler For compensating radial and angular deviations 82
FK/CRFK
[21] Rod clevis Permits a swivelling movement of the cylinder in one plane 82
SG/CRSG
[22] Adapter For mounting a suction cup on a hollow piston rod 82
AD
[23] Coupling piece To compensate for radial deviations 82
KSG/KSZ
[24] Rod eye With spherical bearing 82
SGS/CRSGS
[25] Right-angle clevis foot For rod eye SGS 83
LQG
[26] Rod clevis With male thread 82
SGA

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 11

Compact cylinders ADN, to ISO 21287

Type codes
001 Series 009 Piston rod type
ADN Compact cylinder, double-acting, based on ISO 21287 At one end
S2 Through piston rod
002 Piston diameter [mm] S20 Through, hollow piston rod
12 12
16 16 010 Custom thread
20 20 “M5”K5 M5
25 25 “M6”K5 M6
32 32 “M8”K5 M8
40 40 “M10”K5 M10
50 50 “M10x1,25”K5 M10x1.25
63 63 “M12”K5 M12
80 80 “M16”K5 M16
100 100 “M20”K5 M20
125 125 “M20x1,5”K5 M20x1.5

003 Stroke [mm] 011 Temperature range

5 5 Standard
10 10 S6 Heat-resistant seals max. 120 °C
15 15
20 20 012 Constant motion
25 25 Standard
30 30 S10 Uniform, slow movement
40 40
50 50 013 Running characteristics
60 60 Standard
80 80 S11 Low friction
... 5 ... 80
014 Improved running performance
004 Piston rod thread type None
A Male thread K10 Smooth anodised aluminium coated piston rod
I Female thread
015 Corrosion protection
005 Cushioning Standard
P Elastic cushioning rings/plates on both sides R3 High corrosion protection
PPS Pneumatic cushioning, self-adjusting at both ends
016 Captive rating plate
006 Position sensing Rating plate, glued
A For proximity sensor TL Laser etched rating plate

007 Special material properties 017 Low temperature

None None
F1A Recommended for production facilities for the manufacture of TT -40 °C ... +80 °C
lithium-ion batteries
018 Scraper variant
008 Protection against rotation
Standard
None R8 Dust protection
Q Square piston rod
019 EU certification
None
EX4 II 2GD

12 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Data sheet
Function
Elastic cushioning (P)
-N- Diameter
12 ... 125 mm

-T- Stroke length

1 ... 500 mm

Self-adjusting cushioning (PPS) Variants a page 3

-É- www.festo.com

General technical data

Piston @ 12 16 20 25 32 40 50 63 80 100 125
Design Piston
Piston rod
Cylinder barrel
Mode of operation Double-acting
Cushioning
P Elastic cushioning rings/plates at both ends
PPS – Pneumatic cushioning, self-adjusting at both ends –
Cushioning length
PPS [mm] – 3 3.5 4 5 6 7 7.5 10 –
Position sensing Via proximity sensor
Type of mounting Via through-hole
Via female thread
Via accessories
Mounting position Any

Technical data – Basic version and variants

Piston @ 12 16 20 25 32 40
Pneumatic connection
– M5 M5 M5 M5 G1/8 G1/8
S1 – – – M5 – M5
Female piston rod thread
– M3 M4 M6 M6 M8 M8
K5 – – M5 M5 M6 M6
S1 – – – M6 – M10
S1-K5 – – – M5 – M8
Male piston rod thread
– M5 M6 M8 M8 M10x1.25 M10x1.25
K5 M6 M8 M10; M10x1.25 M10; M10x1.25 M10; M12 M10; M12
S1 – – – M8 – M12x1.25
S1-K5 – – – M10; M10x1.25 – M10x1.25; M12
Q-K5 M6 M8 M10; M10x1.25 M10; M10x1.25 M10 M10
Max. torsional backlash of piston rod [°]
Q 2 1.8 1.6 1.6 1.2 1.2

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 13

Compact cylinders ADN, to ISO 21287

Data sheet
Technical data – Basic version and variants
Piston @ 50 63 80 100 125
Pneumatic connection
– G1/8 G1/8 G1/8 G1/8 G1/4
S1 – G1/8 – G1/8 –
Female piston rod thread
– M10 M10 M12 M12 M16
K5 M8 M8 M10 M10 –
S1 – M12 – M16 –
S1-K5 – M10 – – –
Male piston rod thread
– M12x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5
K5 M12; M16 M12; M16 M16; M20; M20x1.5 M16; M20; M20x1.5 M20
S1 – M16x1.5 – M20x1.5 –
S1-K5 – M12x1.25; M16 – M16x1.5; M20 –
Q-K5 M12 M12 M16 M16 M20
Max. torsional backlash of piston rod [°]
Q 1 1 0.8 0.8 0.8

Operating and environmental conditions

Piston @ 12 16 20 25 32 40 50 63 80 100 125
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating/ Lubricated operation possible (in which case lubricated operation will always be required)
pilot medium
Operating pressure [bar]
[MPa]
– 0.1 ... 1 0.06 ... 1
PPS – 0.15 ... 1 0.1 ... 1 –
Q 0.13 ... 1 0.1 ... 1 0.08 ... 1 0.06 ... 1
S1 – 0.1 ... 1 – 0.1 ... 1 – 0.1 ... 1 – 0.1 ... 1 –
S2, S20 0.15 ... 1 0.13 ... 1 0.12 ... 1 0.1 ... 1 0.08 ... 1
S6 0.1 ... 1 0.06 ... 1
S11 0.045 ... 1 0.025 ... 1
R8, TT – 0.15 ... 1 0.1 ... 1 –
[bar]
– 1 ... 10 0.6 ... 10
PPS – 1.5 ... 10 1 ... 10 –
Q 1.3 ... 10 1 ... 10 0.8 ... 10 0.6 ... 10
S1 – 1 ... 10 – 1 ... 10 – 1 ... 10 – 1 ... 10 –
S2, S20 1.5 ... 10 1.3 ... 10 1.2 ... 10 1 ... 10 0.8 ... 10
S6 1 ... 10 0.6 ... 10
S11 0.45 ... 10 0.25 ... 10
R8, TT – 1.5 ... 10 1 ... 10 –
Ambient temperature1) [°C]
– –20 ... +80
S6 0 ... +120
R3 –20 ... +80
TT – –40 ... +80 –
Corrosion resistance class CRC2)
– 2
R3 3
F1A 0
ATEX Selected types a www.festo.com

1) Note operating range of proximity sensors

2) Corrosion resistance class CRC 0 to Festo standard FN 940070
No corrosion stress. Applies to small, visually unimportant standards-based parts such as threaded pins, circlips and clamping sleeves which are usually only available on the market in a phosphated or burnished version
(and possibly oiled) as well as to ball bearings (for components < CRC 3) and plain bearings.
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment.
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. Externally visible parts with primarily functional surface requirements which are in direct contact with a normal industrial environment.

14 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Data sheet
Forces [N] and impact energy [J]
Piston @ 12 16 20 25 32 40 50 63 80 100 125
Theoretical force at 6 bar, advancing
– 68 121 188 295 483 754 1178 1870 3016 4712 7363
S1 – – – 295 – 754 – 1870 – 4712 –
S2 51 90 141 247 415 686 1057 1750 2827 4524 7069
Theoretical force at 6 bar, retracting
– 51 90 141 247 415 686 1057 1750 2827 4524 7069
S1 – – – 247 – 633 – 1681 – 4417 –
S2 51 90 141 247 415 686 1057 1750 2827 4524 7069
Max. impact energy at the end positions
– 0.07 0.15 0.2 0.3 0.4 0.7 1 1.3 1.8 2.5 3.3
S1 – – – 0.3 – 0.7 – 1.3 – 2.5 –
S6 0.035 0.075 0.1 0.15 0.2 0.35 0.5 0.65 0.9 1.25 1.75
K10 – – 0.16 0.24 0.32 0.56 0.8 1 1.4 2 2.6
S20 – 0.016 0.024 0.083 0.15 0.39 0.48 0.62 0.8 0.9 0.95

V Perm. impact speed

-H- Note Permissible impact speed: V=
2×E E Max. impact energy
These specifications represent the
m1 + m2
m1 Moving mass (drive)
maximum values that can be m2 Moving payload
Maximum permissible mass: 2×E
achieved. The maximum permissible =
m2 − m1
impact energy must be observed. v²

Max. energy conversion capacity [J]

-H- Note Piston @ 20 25 32 40 50 63 80 100
In combination with the self-adjust-
ing cushioning (PPS), the maximum For self-adjusting cushioning (PPS) 0.65 0.8 1 1.7 2.8 4.8 8 12
impact energy is still obtained.

Max. lateral load Fq as a function of projection x

@ 12 ... 63 @ 80 ... 125

@ 12 @ 80/100
@ 16 @ 125
@ 20
@ 25
@ 32/40
@ 50/63

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 15

Compact cylinders ADN, to ISO 21287

Data sheet
Max. lateral load Fq as a function of projection x and lever arm a
Q – Square piston rod
@ 12 @ 16

a = 5 mm a = 5 mm
a = 10 mm a = 10 mm
a = 15 mm a = 15 mm
a = 20 mm a = 20 mm
a = 25 mm a = 25 mm
a = 30 mm a = 30 mm

@ 20/25 @ 32/40

a = 5 mm a = 10 mm
a = 10 mm a = 20 mm
a = 15 mm a = 30 mm
a = 20 mm a = 40 mm
a = 25 mm a = 50 mm
a = 30 mm a = 60 mm

-H- Note
• Torques on the piston rod are to be excluded with projections greater than • If a = 0, the corresponding lateral load line of the basic version of the ADN can
those shown in the graphs. be used (a page 15).

16 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Data sheet
Max. lateral load Fq as a function of projection x and lever arm a
Q – Square piston rod
@ 50/63 @ 80/100

a = 10 mm a = 10 mm
a = 20 mm a = 20 mm
a = 30 mm a = 30 mm
a = 40 mm a = 40 mm
a = 50 mm a = 50 mm
a = 60 mm a = 60 mm

@ 125

a = 10 mm
a = 20 mm
a = 30 mm
a = 40 mm
a = 50 mm
a = 60 mm

-H- Note
• Torques on the piston rod are to be excluded with projections greater than • If a = 0, the corresponding lateral load line of the basic version of the ADN can
those shown in the graphs. be used (a page 15).

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 17

Compact cylinders ADN, to ISO 21287

Data sheet
Max. lateral load Fq as a function of projection x
S1 – Reinforced piston rod

Fq

d
@ 25
@ 40
@ 63
@ 100

Weight [g]
Piston @ 12 16 20 25 32 40 50 63 80 100 125
Product weight with 0 mm stroke 77 79 131 156 265 346 540 722 1121 2154 2880
Additional weight per 10 mm stroke 12 14 21 23 30 37 51 59 79 98 117

Moving mass with 0 mm stroke 9 15 30 50 60 80 140 180 400 570 1080

Additional mass per 10 mm stroke 2 4 6 6 9 9 16 16 25 25 39

Materials
Sectional view

1 2 3 1

Compact cylinder Basic version, Q R8 S6, S10, S11 R3 K10 F1A

[1] Cover
@ 12 ... 63 Anodised aluminium
@ 80 ... 125 Coated die-cast aluminium
[2] Cylinder barrel Anodised aluminium
[3] Piston rod High-alloy steel Hard-chrome-plated High-alloy steel Anodised aluminium High-alloy steel
­tempered steel
[4] Flange screws
@ 12 ... 16 High-alloy steel High-alloy steel – Steel, nickel-plated
@ 20 ... 63 Galvanised steel Tempered steel Galvanised steel
@ 80 ... 125 Standard screws, galvanised steel Standard screws, Standard screws,
high-alloy steel galvanised steel
– Seals Polyurethane Fluoro rubber Polyurethane Polyurethane
Note on materials
ADN-... RoHS-compliant
PWIS conformity: VDMA24364-B1/B2-L
ADN-...-S10/11 Contains PWIS (paint-wetting impairment substances)
PWIS conformity: VDMA24364 zone III
ADN-...-F1A Metals with copper, zinc or nickel as the main constituent are excluded from use.
Exceptions are nickel in steels, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils.

18 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Data sheet
Dimensions – Basic version Download CAD data a www.festo.com
@ 12 ... 63 @ 80 ... 125

@ 32 ... 63

@ 12 ... 25    @ 12

+ = plus stroke length

[1] = Drilled hole for centring pin/sleeve

@ BG D1 D5 E EE G J2 J3 LA
@ @
[mm] min. H9 +0.2
12 27.5 +0.3 10.5 2 –
17 6F9 3.5
16 29 +0.3 11
M5
20 35.5 +0.3 2.6
19.5 9 12
25 39.5 +0.3
9F9
32 47 +0.3 6
26 5
40 54.5 +0.3
15 8
50 65.5 +0.3
27 12F9 G1/8
63 75.5 +0.3
11.5
80 17 12 95.5 +0.6 16.5
15 2.6
100 21.5 113.5 +0.6 21.5 20
125 20 – 134.6 +0.3 G1/4 20 21.15 –

@ MM PL RT SF T2 TG ZA ZB
[mm] @ PPS
+0.2 h13 +0.1 ±0.2 ±0.3 +1.2 +1.3
12 6 5 16 39.2
M4 35 –
16 8 7 18 39.7
6
20 22 37 42.5 42.5
10 M5 9 2.1
25 26 39 44.5 45.3
32 32.5 44 50 50.6
12 M6 10
40 38 51.1 51.7
45
50 8.2 46.5 52.7 53.2
16 M8 13
63 56.5 49 56.5 57
80 2.6 72 54 62.9 63.4
20 M10 17
100 89 67 76 76.8
10.5
125 25 M12 21 110 81 92 –

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 19

Compact cylinders ADN, to ISO 21287

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
Basic version

[1] Hex nut DIN 439-B

only with @ 32 ... 125

+ = plus stroke length

S2 – Through piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 125

+ = plus stroke length

++ = plus 2x stroke length

S20 – Through, hollow piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 125

+ = plus stroke length

++ = plus 2x stroke length

K2 – Extended male piston rod thread

-H- Note
In combination with variants S2/
S20, the piston rod thread is ex-
[1] Hex nut DIN 439-B
tended at both ends
only with @ 32 ... 125

+ = plus stroke length

K5 – Special piston rod thread

20 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
K8 – Extended piston rod

-H- Note
In combination with variants S2/
S20, the piston rod thread is ex-
tended at one end
[1] Hex nut DIN 439-B
only with @ 32 ... 125

+ = plus stroke length

R8 – Dust protection / TT – Low temperature

[1] Hex nut DIN 439-B

only with @ 32 ... 125

+ = plus stroke length

@ A A1 A2 AF AF5 B D7 D8 D9 L5 KF KF5 KK
@ @ @
[mm] –0.5 min. min.
12 10 8 – – – M3 M5
1 ... 10 – – –
16 12 10 4.5 3.2 3 M4 M6
1 ... 300
20
16 14 12 18 6 3.8 2 M6 M5 M8
25
–
32
19 1 ... 20 16 14 27 8 4.5 3 M8 M6 M10x1.25
40
1 ... 400
50
22 16 31 10 6 3.5 M10 M8 M12x1.25
63
20
80
28 1 ... 30 20 35 G1/8 8 M12 M10 M16x1.5
100 1 ... 500 – –
125 40 1 ... 40 25 – – G1/4 11.7 M16 – M20x1.5

@ KK5 T3 T4 VD WH ZB ZM
[mm] PPS R8/TT PPS R8/TT PPS
+1.3 +1.4 +1.3 +1.2 +1.3 +1.2
12 M6 4.2 39.2 44.5 +0.5
– 1.5 – – – – – –
16 M8 4.7 39.7 45.7 +0.5
20 M10x1.25 5.5 42.5 42.5 47.5 49.5 +0.5 49.5 +0.5
2 2.6 5.2 5.5 10.5
25 M10 5.5 44.5 45.3 49.5 51.5 +0.5 51.5 +0.5
32 M10 6 6.5 50 50.6 56.5 57.5 +0.5 58.6 +0.6
2.6 3.3 12.5
40 M12 6.1 6.6 51.1 51.7 57.5 58.6 +0.6 59.7 +0.7
50 M12 7.7 8.2 14.7 52.7 53.2 59.7 62.0 +0.6 63.1 +0.7
3.3 4.7
63 M16 6.4 7.5 8 14.6 56.5 57 63.6 65.4 +0.6 66.5 +0.7
80 M16 8.9 9.4 15.4 62.9 63.4 69.4 73.2 +0.6 74.3 +0.7
100 M20x1.5 4.7 6.1
9 9.8 15.5 76 76.8 82.5 86.4 +0.6 88 +0.7
M20
125 M20 – 7 – 11 – – 92 – – 104.4 +0.6 –

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 21

Compact cylinders ADN, to ISO 21287

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
Q – Square piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 125

+ = plus stroke length

Q-S2 – Square, through piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 125

+ = plus stroke length

++ = plus 2x stroke length

Q-S20 – Square, through, hollow piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 125

+ = plus stroke length

++ = plus 2x stroke length

Q-K2 – Square piston rod with extended male thread

-H- Note
In combination with variants S2/
S20, the piston rod thread is ex-
[1] Hex nut DIN 439-B
tended at both ends.
only with @ 32 ... 125

+ = plus stroke length

Q-K5 – Square piston rod with special thread

+ = plus stroke length

22 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
Q-K8 – Square, extended piston rod

-H- Note
In combination with variants S2/
S20, the piston rod thread is ex-
tended at both ends.
[1] Hex nut DIN 439-B
only with @ 32 ... 125

+ = plus stroke length

@ A A1 A2 AF AF3 B1 D7 D8 D9
™ @ @
[mm] –0.5 min. min.
12 10 8 8 5.5 – –
1 ... 10
16 12 10 10 7 4.5 3.2
1 ... 300
20
16 14 12 9 6 3.8
25
–
32
19 1 ... 20 16 14 10 8 4.5
40
1 ... 400
50
22 20 16 12 10 6
63
80
28 1 ... 30 20 20 16 G1/8 8
100 1 ... 500 –
125 40 1 ... 40 25 24 20 G1/4 11.7

@ L5 KF KF3 KK KK5 T2 WH ZB ZM

[mm] +1.3 +1.2

12 – M3 M3 M5 M6 4.2 39.2 44.5 +0.5
1.5
16 3 M4 M4 M6 M8 4.7 39.7 45.7 +0.5
20 M10x1.25 42.5 49.5 +0.5
2 M6 M5 M8 2 5.5
25 M10 44.5 51.5 +0.5
32 6 50 57.5 +0.5
3 M8 M6 M10x1.25 M10 2.6
40 6.1 51.1 58.6 +0.6
50 8.2 53.2 62.8 +0.6
3.5 M10 M8 M12x1.25 M12 3.3
63 8.1 57.1 66.6 +0.6
80 8.9 62.9 73.2 +0.6
M12 M10 M16x1.5 M16 4.7
100 – 9 76 86.4 +0.6
125 M16 M12 M20x1.5 M20 6.1 11 92 104.4 +0.6

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 23

Compact cylinders ADN, to ISO 21287

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
S1 – Reinforced piston rod
@ 25

+ = plus stroke length

@ 40 ... 100

[1] Cylinder advancing

[2] Cylinder retracting

+ = plus stroke length

@ B BG D1 E EE J3 LA MM PL
@ @ @
[mm] f8 min. H9
25 22 15 39.5 +0.3 – 10 6
9 M5
40 35 54.5 +0.3 15 16
16 5 8.2
63 42 75.5 +0.3 23 20
12 G1/8
100 55 17 113.5 +0.6 40 25 10.5

@ RT SF T2 TG VD WH ZA ZB

[mm] h13 +0.1 ±0.2 +1.3 ±0.3 +1.2

25 M5 9 26 6 11.8 39 50.9
2.1
40 M6 13 38 9.5 18 45 62.9
63 M8 17 56.5 12 21 49 70.2
2.6
100 M10 21 89 15.5 26.5 67 93.5

24 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
S1 – Reinforced piston rod

[1] Hex nut DIN 439-B

only with @ 40 ... 100

+ = plus stroke length

S1-K2 – Reinforced piston rod with extended male piston rod thread

[1] Hex nut DIN 439-B

only with @ 40 ... 100

+ = plus stroke length

S1-K5 – Reinforced piston rod with special piston rod thread

[1] Hex nut DIN 439-B

only with @ 40 ... 100

+ = plus stroke length

S1-K8 – Reinforced piston rod with extended piston rod thread

[1] Hex nut DIN 439-B

only with @ 40 ... 100

+ = plus stroke length

@ A A1 A2 AF AF5 KF KF5 KK KK5 T3 T4 WH ZB

[mm] –0.5 min. min. +1.3 +1.2

25 M10x1.25
16 1 ... 300 14 12 M6 M5 M8 2 2.6 11.8 50.9
M10
40 M10x1.25
22 1 ... 20 16 M10 M8 M12x1.25 3.3 4.7 18 62.9
M12
1 ... 400 20
63 M12x1.25
28 20 M12 M10 M16x1.5 4.7 6.1 21 70.2
M16
100 M16x1.5
40 1 ... 30 1 ... 500 25 – M16 – M20x1.5 – 7 26.5 93.5
M20

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 25

Compact cylinders ADN, to ISO 21287

Data sheet
q  Core product range
Ordering data
Type Piston @ Stroke I– Piston rod with female thread A– Piston rod with male thread
P– Elastic cushioning rings/plates at both P– Elastic cushioning rings/plates at both
ends ends
[mm] [mm] Part no. Type Part no. Type
12 5 q 536211 ADN-12-5-I-P-A q 536204 ADN-12-5-A-P-A
10 q 536212 ADN-12-10-I-P-A q 536205 ADN-12-10-A-P-A
15 q 536213 ADN-12-15-I-P-A q 536206 ADN-12-15-A-P-A
20 q 536214 ADN-12-20-I-P-A q 536207 ADN-12-20-A-P-A
25 q 536215 ADN-12-25-I-P-A q 536208 ADN-12-25-A-P-A
30 q 536216 ADN-12-30-I-P-A q 536209 ADN-12-30-A-P-A
40 q 536217 ADN-12-40-I-P-A q 536210 ADN-12-40-A-P-A

16 5 q 536226 ADN-16-5-I-P-A q 536219 ADN-16-5-A-P-A

10 q 536227 ADN-16-10-I-P-A q 536220 ADN-16-10-A-P-A
15 q 536228 ADN-16-15-I-P-A q 536221 ADN-16-15-A-P-A
20 q 536229 ADN-16-20-I-P-A q 536222 ADN-16-20-A-P-A
25 q 536230 ADN-16-25-I-P-A q 536223 ADN-16-25-A-P-A
30 q 536231 ADN-16-30-I-P-A q 536224 ADN-16-30-A-P-A
40 q 536232 ADN-16-40-I-P-A q 536225 ADN-16-40-A-P-A
50 q 536341 ADN-16-50-I-P-A q 536331 ADN-16-50-A-P-A

20 5 q 536242 ADN-20-5-I-P-A q 536234 ADN-20-5-A-P-A

10 q 536243 ADN-20-10-I-P-A q 536235 ADN-20-10-A-P-A
15 q 536244 ADN-20-15-I-P-A q 536236 ADN-20-15-A-P-A
20 q 536245 ADN-20-20-I-P-A q 536237 ADN-20-20-A-P-A
25 q 536246 ADN-20-25-I-P-A q 536238 ADN-20-25-A-P-A
30 q 536247 ADN-20-30-I-P-A q 536239 ADN-20-30-A-P-A
40 q 536248 ADN-20-40-I-P-A q 536240 ADN-20-40-A-P-A
50 q 536249 ADN-20-50-I-P-A q 536241 ADN-20-50-A-P-A
60 q 536362 ADN-20-60-I-P-A q 536352 ADN-20-60-A-P-A

25 5 q 536259 ADN-25-5-I-P-A q 536251 ADN-25-5-A-P-A

10 q 536260 ADN-25-10-I-P-A q 536252 ADN-25-10-A-P-A
15 q 536261 ADN-25-15-I-P-A q 536253 ADN-25-15-A-P-A
20 q 536262 ADN-25-20-I-P-A q 536254 ADN-25-20-A-P-A
25 q 536263 ADN-25-25-I-P-A q 536255 ADN-25-25-A-P-A
30 q 536264 ADN-25-30-I-P-A q 536256 ADN-25-30-A-P-A
40 q 536265 ADN-25-40-I-P-A q 536257 ADN-25-40-A-P-A
50 q 536266 ADN-25-50-I-P-A q 536258 ADN-25-50-A-P-A
60 q 536383 ADN-25-60-I-P-A q 536373 ADN-25-60-A-P-A

32 5 q 536278 ADN-32-5-I-P-A q 536268 ADN-32-5-A-P-A

10 q 536279 ADN-32-10-I-P-A q 536269 ADN-32-10-A-P-A
15 q 536280 ADN-32-15-I-P-A q 536270 ADN-32-15-A-P-A
20 q 536281 ADN-32-20-I-P-A q 536271 ADN-32-20-A-P-A
25 q 536282 ADN-32-25-I-P-A q 536272 ADN-32-25-A-P-A
30 q 536283 ADN-32-30-I-P-A q 536273 ADN-32-30-A-P-A
40 q 536284 ADN-32-40-I-P-A q 536274 ADN-32-40-A-P-A
50 q 536285 ADN-32-50-I-P-A q 536275 ADN-32-50-A-P-A
60 q 536286 ADN-32-60-I-P-A q 536276 ADN-32-60-A-P-A
80 q 536287 ADN-32-80-I-P-A q 536277 ADN-32-80-A-P-A

26 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Data sheet
q  Core product range
Ordering data
Type Piston @ Stroke I– Piston rod with female thread A– Piston rod with male thread
P– Elastic cushioning rings/plates at both P– Elastic cushioning rings/plates at both
ends ends
[mm] [mm] Part no. Type Part no. Type
40 5 q 536299 ADN-40-5-I-P-A q 536289 ADN-40-5-A-P-A
10 q 536300 ADN-40-10-I-P-A q 536290 ADN-40-10-A-P-A
15 q 536301 ADN-40-15-I-P-A q 536291 ADN-40-15-A-P-A
20 q 536302 ADN-40-20-I-P-A q 536292 ADN-40-20-A-P-A
25 q 536303 ADN-40-25-I-P-A q 536293 ADN-40-25-A-P-A
30 q 536304 ADN-40-30-I-P-A q 536294 ADN-40-30-A-P-A
40 q 536305 ADN-40-40-I-P-A q 536295 ADN-40-40-A-P-A
50 q 536306 ADN-40-50-I-P-A q 536296 ADN-40-50-A-P-A
60 q 536307 ADN-40-60-I-P-A q 536297 ADN-40-60-A-P-A
80 q 536308 ADN-40-80-I-P-A q 536298 ADN-40-80-A-P-A

50 5 q 536320 ADN-50-5-I-P-A q 536310 ADN-50-5-A-P-A

10 q 536321 ADN-50-10-I-P-A q 536311 ADN-50-10-A-P-A
15 q 536322 ADN-50-15-I-P-A q 536312 ADN-50-15-A-P-A
20 q 536323 ADN-50-20-I-P-A q 536313 ADN-50-20-A-P-A
25 q 536324 ADN-50-25-I-P-A q 536314 ADN-50-25-A-P-A
30 q 536325 ADN-50-30-I-P-A q 536315 ADN-50-30-A-P-A
40 q 536326 ADN-50-40-I-P-A q 536316 ADN-50-40-A-P-A
50 q 536327 ADN-50-50-I-P-A q 536317 ADN-50-50-A-P-A
60 q 536328 ADN-50-60-I-P-A q 536318 ADN-50-60-A-P-A
80 q 536329 ADN-50-80-I-P-A q 536319 ADN-50-80-A-P-A

63 10 q 536342 ADN-63-10-I-P-A q 536332 ADN-63-10-A-P-A

15 q 536343 ADN-63-15-I-P-A q 536333 ADN-63-15-A-P-A
20 q 536344 ADN-63-20-I-P-A q 536334 ADN-63-20-A-P-A
25 q 536345 ADN-63-25-I-P-A q 536335 ADN-63-25-A-P-A
30 q 536346 ADN-63-30-I-P-A q 536336 ADN-63-30-A-P-A
40 q 536347 ADN-63-40-I-P-A q 536337 ADN-63-40-A-P-A
50 q 536348 ADN-63-50-I-P-A q 536338 ADN-63-50-A-P-A
60 q 536349 ADN-63-60-I-P-A q 536339 ADN-63-60-A-P-A
80 q 536350 ADN-63-80-I-P-A q 536340 ADN-63-80-A-P-A

80 10 q 536363 ADN-80-10-I-P-A q 536353 ADN-80-10-A-P-A

15 q 536364 ADN-80-15-I-P-A q 536354 ADN-80-15-A-P-A
20 q 536365 ADN-80-20-I-P-A q 536355 ADN-80-20-A-P-A
25 q 536366 ADN-80-25-I-P-A q 536356 ADN-80-25-A-P-A
30 q 536367 ADN-80-30-I-P-A q 536357 ADN-80-30-A-P-A
40 q 536368 ADN-80-40-I-P-A q 536358 ADN-80-40-A-P-A
50 q 536369 ADN-80-50-I-P-A q 536359 ADN-80-50-A-P-A
60 q 536370 ADN-80-60-I-P-A q 536360 ADN-80-60-A-P-A
80 q 536371 ADN-80-80-I-P-A q 536361 ADN-80-80-A-P-A

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 27

Compact cylinders ADN, to ISO 21287

Data sheet
q  Core product range
Ordering data
Type Piston @ Stroke I– Piston rod with female thread A – Piston rod with male thread
PPS – Pneumatic cushioning, self-adjusting at PPS – Pneumatic cushioning, self-adjusting at
both ends both ends
[mm] [mm] Part no. Type Part no. Type
32 10 q 572646 ADN-32-10-I-PPS-A q 572655 ADN-32-10-A-PPS-A
15 q 572647 ADN-32-15-I-PPS-A q 572656 ADN-32-15-A-PPS-A
20 q 572648 ADN-32-20-I-PPS-A q 572657 ADN-32-20-A-PPS-A
25 q 572649 ADN-32-25-I-PPS-A q 572658 ADN-32-25-A-PPS-A
30 q 572650 ADN-32-30-I-PPS-A q 572659 ADN-32-30-A-PPS-A
40 q 572651 ADN-32-40-I-PPS-A q 572660 ADN-32-40-A-PPS-A
50 q 572652 ADN-32-50-I-PPS-A q 572661 ADN-32-50-A-PPS-A
60 q 572653 ADN-32-60-I-PPS-A q 572662 ADN-32-60-A-PPS-A
80 q 572654 ADN-32-80-I-PPS-A q 572663 ADN-32-80-A-PPS-A

40 10 q 572664 ADN-40-10-I-PPS-A q 572673 ADN-40-10-A-PPS-A

15 q 572665 ADN-40-15-I-PPS-A q 572674 ADN-40-15-A-PPS-A
20 q 572666 ADN-40-20-I-PPS-A q 572675 ADN-40-20-A-PPS-A
25 q 572667 ADN-40-25-I-PPS-A q 572676 ADN-40-25-A-PPS-A
30 q 572668 ADN-40-30-I-PPS-A q 572677 ADN-40-30-A-PPS-A
40 q 572669 ADN-40-40-I-PPS-A q 572678 ADN-40-40-A-PPS-A
50 q 572670 ADN-40-50-I-PPS-A q 572679 ADN-40-50-A-PPS-A
60 q 572671 ADN-40-60-I-PPS-A q 572680 ADN-40-60-A-PPS-A
80 q 572672 ADN-40-80-I-PPS-A q 572681 ADN-40-80-A-PPS-A

50 10 q 572682 ADN-50-10-I-PPS-A q 572691 ADN-50-10-A-PPS-A

15 q 572683 ADN-50-15-I-PPS-A q 572692 ADN-50-15-A-PPS-A
20 q 572684 ADN-50-20-I-PPS-A q 572693 ADN-50-20-A-PPS-A
25 q 572685 ADN-50-25-I-PPS-A q 572694 ADN-50-25-A-PPS-A
30 q 572686 ADN-50-30-I-PPS-A q 572695 ADN-50-30-A-PPS-A
40 q 572687 ADN-50-40-I-PPS-A q 572696 ADN-50-40-A-PPS-A
50 q 572688 ADN-50-50-I-PPS-A q 572697 ADN-50-50-A-PPS-A
60 q 572689 ADN-50-60-I-PPS-A q 572698 ADN-50-60-A-PPS-A
80 q 572690 ADN-50-80-I-PPS-A q 572699 ADN-50-80-A-PPS-A

63 10 q 572700 ADN-63-10-I-PPS-A q 572709 ADN-63-10-A-PPS-A

15 q 572701 ADN-63-15-I-PPS-A q 572710 ADN-63-15-A-PPS-A
20 q 572702 ADN-63-20-I-PPS-A q 572711 ADN-63-20-A-PPS-A
25 q 572703 ADN-63-25-I-PPS-A q 572712 ADN-63-25-A-PPS-A
30 q 572704 ADN-63-30-I-PPS-A q 572713 ADN-63-30-A-PPS-A
40 q 572705 ADN-63-40-I-PPS-A q 572714 ADN-63-40-A-PPS-A
50 q 572706 ADN-63-50-I-PPS-A q 572715 ADN-63-50-A-PPS-A
60 q 572707 ADN-63-60-I-PPS-A q 572716 ADN-63-60-A-PPS-A
80 q 572708 ADN-63-80-I-PPS-A q 572717 ADN-63-80-A-PPS-A

80 10 q 572718 ADN-80-10-I-PPS-A q 572727 ADN-80-10-A-PPS-A

15 q 572719 ADN-80-15-I-PPS-A q 572728 ADN-80-15-A-PPS-A
20 q 572720 ADN-80-20-I-PPS-A q 572729 ADN-80-20-A-PPS-A
25 q 572721 ADN-80-25-I-PPS-A q 572730 ADN-80-25-A-PPS-A
30 q 572722 ADN-80-30-I-PPS-A q 572731 ADN-80-30-A-PPS-A
40 q 572723 ADN-80-40-I-PPS-A q 572732 ADN-80-40-A-PPS-A
50 q 572724 ADN-80-50-I-PPS-A q 572733 ADN-80-50-A-PPS-A
60 q 572725 ADN-80-60-I-PPS-A q 572734 ADN-80-60-A-PPS-A
80 q 572726 ADN-80-80-I-PPS-A q 572735 ADN-80-80-A-PPS-A

28 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Data sheet
Ordering data
Type Piston @ Stroke I– Piston rod with female thread A– Piston rod with male thread
P– Elastic cushioning rings/plates at both P– Elastic cushioning rings/plates at both
ends ends
[mm] [mm] Part no. Type Part no. Type
100 10 536384 ADN-100-10-I-P-A 536374 ADN-100-10-A-P-A
15 536385 ADN-100-15-I-P-A 536375 ADN-100-15-A-P-A
20 536386 ADN-100-20-I-P-A 536376 ADN-100-20-A-P-A
25 536387 ADN-100-25-I-P-A 536377 ADN-100-25-A-P-A
30 536388 ADN-100-30-I-P-A 536378 ADN-100-30-A-P-A
40 536389 ADN-100-40-I-P-A 536379 ADN-100-40-A-P-A
50 536390 ADN-100-50-I-P-A 536380 ADN-100-50-A-P-A
60 536391 ADN-100-60-I-P-A 536381 ADN-100-60-A-P-A
80 536392 ADN-100-80-I-P-A 536382 ADN-100-80-A-P-A

Ordering data
Type Piston @ Stroke I– Piston rod with female thread A – Piston rod with male thread
PPS – Pneumatic cushioning, self-adjusting PPS – Pneumatic cushioning, self-adjusting
at both ends at both ends
[mm] [mm] Part no. Type Part no. Type
20 10 577158 ADN-20-10-I-PPS-A 577166 ADN-20-10-A-PPS-A
15 577159 ADN-20-15-I-PPS-A 577167 ADN-20-15-A-PPS-A
20 577160 ADN-20-20-I-PPS-A 577168 ADN-20-20-A-PPS-A
25 577161 ADN-20-25-I-PPS-A 577169 ADN-20-25-A-PPS-A
30 577162 ADN-20-30-I-PPS-A 577170 ADN-20-30-A-PPS-A
40 577163 ADN-20-40-I-PPS-A 577171 ADN-20-40-A-PPS-A
50 577164 ADN-20-50-I-PPS-A 577172 ADN-20-50-A-PPS-A
60 577165 ADN-20-60-I-PPS-A 577173 ADN-20-60-A-PPS-A

25 10 577174 ADN-25-10-I-PPS-A 577182 ADN-25-10-A-PPS-A

15 577175 ADN-25-15-I-PPS-A 577183 ADN-25-15-A-PPS-A
20 577176 ADN-25-20-I-PPS-A 577184 ADN-25-20-A-PPS-A
25 577177 ADN-25-25-I-PPS-A 577185 ADN-25-25-A-PPS-A
30 577178 ADN-25-30-I-PPS-A 577186 ADN-25-30-A-PPS-A
40 577179 ADN-25-40-I-PPS-A 577187 ADN-25-40-A-PPS-A
50 577180 ADN-25-50-I-PPS-A 577188 ADN-25-50-A-PPS-A
60 577181 ADN-25-60-I-PPS-A 577189 ADN-25-60-A-PPS-A

100 15 577191 ADN-100-15-I-PPS-A 577200 ADN-100-15-A-PPS-A

20 577192 ADN-100-20-I-PPS-A 577201 ADN-100-20-A-PPS-A
25 577193 ADN-100-25-I-PPS-A 577202 ADN-100-25-A-PPS-A
30 577194 ADN-100-30-I-PPS-A 577203 ADN-100-30-A-PPS-A
40 577195 ADN-100-40-I-PPS-A 577204 ADN-100-40-A-PPS-A
50 577196 ADN-100-50-I-PPS-A 577205 ADN-100-50-A-PPS-A
60 577197 ADN-100-60-I-PPS-A 577206 ADN-100-60-A-PPS-A
80 577198 ADN-100-80-I-PPS-A 577207 ADN-100-80-A-PPS-A

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 29

Compact cylinders ADN, to ISO 21287

Ordering data – Modular product system, basic sensor and variants

Ordering table
Size 12 16 20 25 32 40 Conditions Code Enter code
Module no. 536203 536218 536233 536250 536267 536288
Function Compact cylinder, double-acting, based on ISO 21287 ADN ADN
Piston @ [mm] 12 16 20 25 32 40 q -...
Stroke [mm] 1 ... 300 1 ... 400 q -...
Piston rod thread Male thread q -A
Female thread [1] q -I
Cushioning Elastic cushioning rings/plates at both ends q -P
– Pneumatic cushioning, self-adjusting at both ends [8] q -PPS
Position sensing Via proximity sensor q -A -A

[1] I Not with piston rod type S20.

Not with extended male thread K2
[8] PPS Not with improved running performance K10, temperature resistance S6, low temperature TT, wiper seal R8
Minimum stroke 5 mm

30 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Ordering data – Modular product system, basic sensor and variants

Ordering table
Size 12 16 20 25 32 40 Conditions Code Enter code
Piston rod type Through piston rod [2] q -S2
– Through, hollow piston rod [2] -S20
[mm] 1 ... 300 1 ... 400
Extended male thread Extended male piston rod thread
[mm] 1 ... 10 1 ... 20 -...K2
Special piston Male thread M6 M8 M10x1.25 M10x1.25 M10 M10 -“...”K5
rod thread M10 M10 M12 M12
Female thread – – M5 M5 M6 M6
Extended piston rod Extended piston rod
[mm] 1 ... 300 1 ... 400 [3] q -...K8
Improved running performance – – Smooth anodised aluminium piston rod [4] -K10
Temperature resistance Heat-resistant seals max. 120°C q -S6
Corrosion protection High corrosion protection [5] q -R3
Captive rating plate Laser-etched rating plate -TL
Low temperature [°C] – – –40 ... +80 [6] [7] -TT
Wiper seal – – Dust protection [6] -R8
Special material properties None
Recommended for production facilities for the manufacture of lithium-ion batteries [9] -F1A

[2] S2, S20 Not with improved running performance K10.

Not with corrosion protection R3.
Not with wiper seal R8
[3] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length
[4] K10 Not with extended male thread K2.
Not with special piston rod thread K5.
Not with corrosion protection R3
[5] R3 Not with captive rating plate TL
Not with wiper seal R8
[6] TT, R8 Not with improved running performance K10.
Not with temperature resistance S6
[7] TT Not with wiper seal R8
[9] F1A Not with S6, S20, K10, R3, TL, TT, R8, PPS

-H- Note
NSF-H1 lubricants are used in combi-
nation with R3 and in combination
with R3 and K2, K5 or K8.

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 31

Compact cylinders ADN, to ISO 21287

Ordering data – Modular product system, basic sensor and variants

Ordering table
Size 50 63 80 100 125 Conditions Code Enter code
Module no. 536309 536330 536351 536372 536393
Function Compact cylinder, double-acting, based on ISO 21287 ADN ADN
Piston @ [mm] 50 63 80 – – q -...
– – – 100 125 -...
Stroke [mm] 1 ... 400 1 ... 500 q -...
Piston rod thread Male thread q -A
Female thread [1] q -I
Cushioning Elastic cushioning rings/plates at both ends q -P
Pneumatic cushioning, self-adjusting at both ends – [8] q -PPS
Position sensing Via proximity sensor q -A -A

[1] I Not with piston rod type S20.

Not with extended male thread K2
[8] PPS Not with improved running performance K10, temperature resistance S6, low temperature TT, wiper seal R8
Minimum stroke 5 mm

32 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Ordering data – Modular product system, basic sensor and variants

Ordering table
Size 50 63 80 100 125 Conditions Code Enter code
Piston rod type Through piston rod [2] q -S2
Through, hollow piston rod [2] -S20
[mm] 1 ... 400 1 ... 500
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 1 ... 30 1 ... 40 -...K2
Special piston Male thread M12 M12 M16 M16 M20 -“...”K5
rod thread M16 M16 M20 M20
M20x1.5 M20x1.5
Female thread M8 M8 M10 M10 –
Extended piston rod Extended piston rod
[mm] 1 ... 400 1 ... 500 [3] q -...K8
Improved running performance Smooth anodised aluminium piston rod [4] -K10
Restricted stroke
[mm] 2 ... 400 5 ... 400 5 ... 500
Temperature resistance Heat-resistant seals max. 120°C q -S6
Corrosion protection High corrosion protection [5] q -R3
Captive rating plate Laser-etched rating plate -TL
Low temperature [°C] –40 ... +80 – [6] [7] -TT
Wiper seal Dust protection – [6] -R8
Special material properties None
Recommended for production facilities for the manufacture of lithium-ion batteries [9] -F1A

[2] S2, S20 Not with improved running performance K10.

Not with corrosion protection R3.
Not with wiper seal R8
[3] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length
[4] K10 Not with extended male thread K2.
Not with special piston rod thread K5.
Not with corrosion protection R3
[5] R3 Not with captive rating plate TL
Not with wiper seal R8
[6] TT, R8 Not with improved running performance K10.
Not with temperature resistance S6
[7] TT Not with wiper seal R8
[9] F1A Not with S6, S20, K10, R3, TL, TT, R8, PPS

-H- Note
NSF-H1 lubricants are used in combi-
nation with R3 and in combination
with R3 and K2, K5 or K8.

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 33

Compact cylinders ADN, to ISO 21287

Ordering data – Modular product system, S10 – constant motion, S11 – low friction
Ordering table
Size 12 16 20 25 32 40 Conditions Code Enter code
Module no. 536203 536218 536233 536250 536267 536288
Function Compact cylinder, double-acting, based on ISO 21287 ADN ADN
Piston @ [mm] 12 16 20 25 32 40 -...
Stroke [mm] 1 ... 300 1 ... 400 -...
Piston rod thread Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Extended male thread Extended male piston rod thread
[mm] 1 ... 10 1 ... 20 -...K2
Special piston rod thread Male thread M6 M8 M10x1.25 M10x1.25 M10 M10 -“...”K5
M10 M10 M12 M12

Female thread – – M5 M5 M6 M6
Extended piston rod Extended piston rod
[mm] 1 ... 300 1 ... 400 [2] -...K8
Improved running performance – – Smooth anodised aluminium piston rod [3] -K10
Constant motion Slow speed (constant motion at low piston speeds) [4] -S10
Restricted stroke
[mm] 20 ... 300 20 ... 400
Low friction Smooth running [5] -S11
Corrosion protection High corrosion protection [6] -R3
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

[2] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length
[3] K10 Not with extended male thread K2
Not with special piston rod thread K5
Not with corrosion protection R3
[4] S10 Not with low friction S11
[5] S11 Not with constant motion S10
[6] R3 Not with captive rating plate TL

-H- Note
NSF-H1 lubricants are used in combi-
nation with R3 and in combination
with R3 and K2, K5 or K8.

34 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Ordering data – Modular product system, S10 – constant motion, S11 – low friction
Ordering table
Size 50 63 80 100 125 Conditions Code Enter code
Module no. 536309 536330 536351 536372 536393
Function Compact cylinder, double-acting, based on ISO 21287 ADN ADN
Piston @ [mm] 50 63 80 100 125 -...
Stroke [mm] 1 ... 400 1 ... 500 -...
Piston rod thread Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 1 ... 30 1 ... 40 -...K2
Special piston rod thread Male thread M12 M12 M16 M16 M20 -“...”K5
M16 M16 M20 M20
M20x1.5 M20x1.5
Female thread M8 M8 M10 M10 –
Extended piston rod Extended piston rod
[mm] 1 ... 400 1 ... 500 [2] -...K8
Improved running performance Smooth anodised aluminium piston rod [3] -K10
Restricted stroke
[mm] 2 ... 400 5 ... 400 5 ... 500
Constant motion Slow speed (constant motion at low piston speeds) [4] -S10
Restricted stroke
[mm] 20 ... 400 20 ... 500
Low friction Smooth running [5] -S11
Corrosion protection High corrosion protection [6] -R3
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

[2] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length
[3] K10 Not with extended male thread K2
Not with special piston rod thread K5
Not with corrosion protection R3
[4] S10 Not with low friction S11
[5] S11 Not with constant motion S10
[6] R3 Not with captive rating plate TL

-H- Note
NSF-H1 lubricants are used in combi-
nation with R3 and in combination
with R3 and K2, K5 or K8.

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 35

Compact cylinders ADN, to ISO 21287

Ordering data – Modular product system, Q – Square piston rod, non-rotating

Ordering table
Size 12 16 20 25 32 40 Conditions Code Enter code
Module no. 536203 536218 536233 536250 536267 536288
Function Compact cylinder, double-acting, based on ISO 21287 ADN ADN
Piston @ [mm] 12 16 20 25 32 40 q -...
Stroke [mm] 1 ... 300 1 ... 400 q -...
Piston rod thread Male thread q -A
Female thread [1] q -I
Cushioning Elastic cushioning rings/plates at both ends q -P -P
Position sensing Via proximity sensor q -A -A
Protection against rotation Square piston rod q -Q -Q
Piston rod type Through piston rod q -S2
– Through, hollow piston rod -S20
Restricted stroke
[mm] 1 ... 200 1 ... 300
Extended male thread Extended male piston rod thread
[mm] 1 ... 10 1 ... 20 -...K2
Special piston rod thread Male thread M6 M8 M10x1.25 M10x1.25 M10 M10 -“...”K5
M10 M10
Extended piston rod Extended piston rod
[mm] 1 ... 300 1 ... 400 [2] q -...K8
Temperature resistance Heat-resistant seals max. 120°C q -S6
Corrosion protection High corrosion protection [3] q -R3
Captive rating plate Laser-etched rating plate -TL

[1] I Not with piston rod type S20.

Not with extended male thread K2
[2] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length
[3] R3 Not with captive rating plate TL

-H- Note
NSF-H1 lubricants are used in combi-
nation with R3 and in combination
with R3 and K2, K5 or K8.

36 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN, to ISO 21287

Ordering data – Modular product system, Q – Square piston rod, non-rotating

Ordering table
Size 50 63 80 100 125 Conditions Code Enter code
Module no. 536309 536330 536351 536372 536393
Function Compact cylinder, double-acting, based on ISO 21287 ADN ADN
Piston @ [mm] 50 63 80 100 125 q -...
Stroke [mm] 1 ... 400 1 ... 500 q -...
Piston rod thread Male thread q -A
Female thread [1] q -I
Cushioning Elastic cushioning rings/plates at both ends q -P -P
Position sensing Via proximity sensor q -A -A
Protection against rotation Square piston rod q -Q -Q
Piston rod type Through piston rod q -S2
Through, hollow piston rod -S20
Restricted stroke
[mm] 1 ... 300 1 ... 400
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 1 ... 30 1 ... 40 -...K2
Special piston rod thread Male thread M12 M12 M16 M16 M20 -“...”K5
Extended piston rod Extended piston rod
[mm] 1 ... 400 1 ... 500 [2] q -...K8
Temperature resistance Heat-resistant seals max. 120°C q -S6
Corrosion protection High corrosion protection [3] q -R3
Captive rating plate Laser-etched rating plate -TL

[1] I Not with piston rod type S20.

Not with extended male thread K2
[2] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length
[3] R3 Not with captive rating plate TL

-H- Note
NSF-H1 lubricants are used in combi-
nation with R3 and in combination
with R3 and K2, K5 or K8.

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 37

Compact cylinders ADN, to ISO 21287

Ordering data – Modular product system, S1 – Reinforced piston rod

Ordering table
Size 25 40 63 100 Conditions Code Enter code

Module no. 536250 536288 536330 536372

Function Compact cylinder, double-acting, based on ISO 21287 ADN ADN
Piston @ [mm] 25 40 63 100 -...
Stroke [mm] 5 ... 300 10 ... 400 10 ... 500 -...
Piston rod thread Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 1 ... 30 -...K2
Special piston Male thread M10x1.25 M10x1.25 M12x1.25 M16x1.5 -“...”K5
rod thread M10 M12 M16 M20
Female thread M5 M8 M10 –
Extended piston rod Extended male piston rod thread
[mm] 1 ... 300 1 ... 400 1 ... 500 [2] -...K8
Temperature resistance Heat-resistant seals max. 120°C -S6
Increased lateral load Reinforced piston rod or extended piston rod bearing -S1 -S1
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

[2] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length

38 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-KP, standard hole pattern, with clamping unit

Type codes
001 Series 007 Position sensing
ADN Compact cylinder, double-acting, based on ISO 21287 A For proximity sensor

002 Piston diameter 008 Piston rod thread extension

20 20 None
25 25 ...K2 1 ... 30 mm
32 32
40 40 009 Custom thread
50 50 “M6”K5 M6
63 63 “M8”K5 M8
80 80 “M10”K5 M10
100 100 “M10x- M10x1.25
1,25”K5
003 Stroke “M12”K5 M12
... 10 ... 500 “M16”K5 M16
“M20x- M20x1.5
004 Clamping unit 1,5”K5
“M5”K5 M5
KP Attached
“M20”K5 M20
005 Piston rod thread type
010 Piston rod extension
A Male thread
None
I Female thread
...K8 1 ... 500 mm
006 Cushioning
011 Captive rating plate
P Elastic cushioning rings/plates on both sides
Rating plate, glued
TL Laser etched rating plate

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 39

Compact cylinders ADN-KP, standard hole pattern, with clamping unit

Data sheet
Function Variants

K2

-N- Diameter
K5
20 ... 100 mm

-T- Stroke length

10 ... 500 mm K8

-H- Note
Additional measures are required for Without additional measures in ac-
use in safety-related applications; in cordance with legally specified mini-
Europe, for example, the standards mum requirements, the product is not
listed under the EC Machinery suitable as a safety-related compo-
Directive must be observed. nent in control systems.

General technical data

Piston @ 20 25 32 40 50 63 80 100
Pneumatic connection
Cylinder M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8
KP M5 M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8
Female piston rod thread
– M6 M8 M10 M12
K5 M5 M6 M8 M10
Male piston rod thread
– M8 M10x1.25 M12x1.25 M16x1.5
K5 M10; M10x1.25 M10; M12 M12; M16 M16; M20; M20x1.5
Axial backlash under load [mm] 0.5 0.8
Design Piston
Piston rod
Cylinder barrel
Cushioning Elastic cushioning rings/plates at both ends
Position sensing Via proximity sensor
Type of mounting Via through-hole
Via female thread
Via accessories
Mounting position Any
Type of clamping with effective direction At both ends

Operating and environmental conditions

Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating/ Lubricated operation possible (in which case lubricated operation will always be required)
pilot medium
Operating pressure [MPa] 0.15 ... 1
[bar] 1.5 ... 10
Min. release pressure [MPa] 0.3
[bar] 3
Ambient temperature1) [°C] –10 ... +80
Corrosion resistance class CRC2) 2

1) Note operating range of proximity sensors

2) Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment.

40 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-KP, standard hole pattern, with clamping unit

Data sheet
Impact energy [J]
Piston @ 20 25 32 40 50 63 80 100
Max. impact energy at the end positions 0.2 0.3 0.4 0.7 1 1.3 1.8 2.5

V Perm. impact speed

-H- Note Permissible impact speed: V=
2×E E Max. impact energy
These specifications represent the
m1 + m2
m1 Moving mass (drive)
maximum values that can be m2 Moving payload
Maximum permissible mass: 2×E
achieved. The maximum permissible =
m2 − m1
impact energy must be observed. v²

Forces [N]
Piston @ 20 25 32 40 50 63 80 100
Theoretical force at 6 bar, advancing 188 295 483 754 1178 1870 3016 4712
Theoretical force at 6 bar, retracting 141 247 415 633 990 1682 2721 4418
Static holding force 350 350 600 1000 1400 2000 5000 5000

-H- Note:

The specified holding force refers to a not exceed the static holding force. The Control
static load. If this value is exceeded, clamping unit is not backlash-free in the The clamping unit may only be released Blocking off the compressed air
slippage may occur. Dynamic forces clamped condition if varying loads are if the forces at the piston have reached supply at both ends (e.g. with a
occurring during operation must applied to the piston rod. equilibrium. Otherwise, there is a risk of 5/3-way valve) does not provide
accidents due to sudden movement of any safety.
the piston rod.

Max. lateral load Fq as a function of projection x

@ 20
@ 25
@ 32/40
@ 50/63
@ 80/100

Weight [g]
Piston @ 20 25 32 40 50 63 80 100
Product weight with 0 mm stroke 282 344 503 789 1268 1894 3973 5497
Additional weight per 10 mm stroke 22 26 29 45 60 68 93 112

Moving mass with 0 mm stroke 53 63 100 173 296 368 755 932
Additional mass per 10 mm stroke 6 6 9 16 25 25 39 39

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 41

Compact cylinders ADN-KP, standard hole pattern, with clamping unit

Data sheet
Materials
Sectional view

1 3 2 1

Compact cylinder
[1] Cover Anodised aluminium
[2] Cylinder barrel Anodised aluminium
[3] Piston rod High-alloy steel
[4] Flange screws @ 20 ... 63 Galvanised steel
@ 80 ... 100 Standard screws, galvanised steel
– Seals Polyurethane, nitrile rubber
Note on materials RoHS-compliant

42 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-KP, standard hole pattern, with clamping unit

Data sheet
Dimensions – Basic version Download CAD data a www.festo.com
@ 20 ... 63
@ 32 ... 63 @ 20 ... 25 Only direct mounting is possible
with this variant.

+ = plus stroke length

Dimensions – Basic version Download CAD data a www.festo.com

@ 80, 100

Only direct mounting is possible

with this variant.

+ = plus stroke length

@ BG D1 D2 D5 E E1 EE G G1 H1 J2
@ @ @
[mm] min. H9
20 35.5 +0.3 49.8 63
19.5 M5 12 2.6
25 20 39.5 +0.3 M5 50.6 65
9 9F9
32 47 +0.3 56.4 68 6
26
40 24 54.5 +0.3 60.4 89
15 8
50 30 65.5 +0.3 67.4 108
27 12F9 G1/8
63 38 75.5 +0.3 G1/8 76.8 120
12 11.5
80 17 95.5 +0.6 99 16.5 167
48 15
100 21.5 113.5 +0.6 99.6 21.5 176 20

@ LA MM PL PL1 RT SF T2 TG ZA ZB
@
[mm] +0.2 +0.2 +0.2 h13 +0.2 ±0.2 ±0.3 +1.2
20 42.8 22 74.8 80.8
10 6 M5 9
25 44.6 26 77.6 83.1
2.1
32 12 49.6 10 32.5 85.4 91.4
5 M6
40 16 53.6 13 38 90.4 96.5
50 60.6 8.2 46.5 97.4 105.6
20 M8 17
63 70 56.5 110.8 118.9
2.6
80 90.7 72 136.5 145.4
2.6 25 M10 21
100 88.6 10.5 89 145.1 154.1

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 43

Compact cylinders ADN-KP, standard hole pattern, with clamping unit

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
Basic version

[2] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

K2 – Extended male piston rod thread

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

K5 – Special piston rod thread

+ = plus stroke length

K8 – Extended piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

44 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-KP, standard hole pattern, with clamping unit

Data sheet
@ A A1 A2 AF AF5 KF KF5

[mm] –0.5 min. min.

20
16 1 ... 300 14 12 M6 M5
25
32
19 1 ... 20 16 14 M8 M6
40
1 ... 400
50
22 16 M10 M8
63
20
80
28 1 ... 30 1 ... 500 20 M12 M10
100

@ KK KK5 T3 T4 WH ZB

[mm] +1.3 +1.2

20 M10x1.25 80.8
M8 2 2.6 5.5
25 M10 83.1
32 M10 6 91.4
M10x1.25 2.6 3.3
40 M12 6.1 96.5
50 M12 8.2 105.6
M12x1.25 3.3 4.7
63 M16 8.1 118.9
80 M16 8.9 145.4
100 M16x1.5 M20x1.5 4.7 6.1
9 154.1
M20

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 45

Compact cylinders ADN-KP, standard hole pattern, with clamping unit

Ordering data – Modular product system

Ordering table
Size 20 25 32 40 Conditions Code Enter code
Module no. 548206 548207 548208 548209
Function Compact cylinder, double-acting, standard hole pattern, with clamping unit ADN ADN
Piston @ [mm] 20 25 32 40 -...
Stroke [mm] 10 ... 300 10 ... 400 -...
Clamping unit Attached -KP -KP
Piston rod thread Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 -...K2
Special piston rod Male thread M10x1.25 M10x1.25 M10 M10 -“...”K5
thread M10 M10 M12 M12

Female thread M5 M5 M6 M6
Extended piston rod Extended piston rod
[mm] 1 ... 300 1 ... 400 [2] -...K8
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

[2] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length

46 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-KP, standard hole pattern, with clamping unit

Ordering data – Modular product system

Ordering table
Size 50 63 80 100 Conditions Code Enter code
Module no. 548210 548211 548212 548213
Function Compact cylinder, double-acting, standard hole pattern, with clamping unit ADN ADN
Piston @ [mm] 50 63 80 100 -...
Stroke [mm] 10 ... 400 10 ... 500 -...
Clamping unit Attached -KP -KP
Piston rod thread Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 1 ... 30 -...K2
Special piston rod Male thread M12 M12 M16 M16 -“...”K5
thread M16 M16 M20 M20
M20x1.5 M20x1.5
Female thread M8 M8 M10 M10
Extended piston rod Extended piston rod
[mm] 1 ... 400 1 ... 500 [2] -...K8
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

[2] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 47

Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Type codes
001 Series 007 Position sensing
ADN Compact cylinder, double-acting, based on ISO 21287 A For proximity sensor

002 Piston diameter 008 Piston rod thread extension

20 20 None
25 25 ...K2 1 ... 30 mm
32 32
40 40 009 Custom thread
50 50 “M6”K5 M6
63 63 “M8”K5 M8
80 80 “M10”K5 M10
100 100 “M10x1,25”K5 M10x1.25
“M12”K5 M12
003 Stroke “M16”K5 M16
... 10 ... 500 “M20x1,5”K5 M20x1.5
“M5”K5 M5
004 End-position locking “M20”K5 M20
ELB Both sides
ELH Rear 010 Piston rod extension
ELV Front None
...K8 1 ... 500 mm
005 Piston rod thread type
A Male thread 011 Captive rating plate
I Female thread Rating plate, glued
TL Laser etched rating plate
006 Cushioning
P Elastic cushioning rings/plates on both sides

48 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Data sheet
Function Variants

K2

-N- Diameter
K5
20 ... 100 mm

-T- Stroke length

10 ... 500 mm K8

-H- Note
Additional measures are required for Without additional measures in ac-
use in safety-related applications; in cordance with legally specified mini-
Europe, for example, the standards mum requirements, the product is not
listed under the EC Machinery suitable as a safety-related compo-
Directive must be observed. nent in control systems.

General technical data

Piston @ 20 25 32 40 50 63 80 100
Pneumatic connection M5 M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8
Female piston rod thread
– M6 M8 M10 M12
K5 M5 M6 M8 M10
Male piston rod thread
– M8 M10x1.25 M12x1.25 M16x1.5
K5 M10; M10x1.25 M10; M12 M12; M16 M16; M20; M20x1.5
Max. axial backlash with ­end [mm] 1.3 2.1
position locked
Design Piston
Piston rod
Cylinder barrel
End-position locking
ELB At both ends
ELV At front
ELH At rear
Cushioning Elastic cushioning rings/plates at both ends
Position sensing Via proximity sensor
Type of mounting Via female thread
Via accessories
Mounting position Any

-H- Note
• No screws with a head or similar • End-position locking has been de- • The cylinder must not be operated prematurely fall to its lower end
may be used in place of end-posi- signed to prevent the load from with external stops (e.g. shock position.)
tion locking, as there is a risk that dropping in case of pressure failure. absorber, buffer, oil brake, etc.):
the function will be impaired if they • Operation of the cylinder in conjunc- – It may not be possible to reliably
are screwed in too deeply. tion with a 3-way valve (especially reach the internal end position.
• The exhaust hole must not be with the function “mid-position – The locking mechanism can wear
closed. closed” and those with “metallic out prematurely. (In the event of
• The piston rod can be locked in any sealing”) should be avoided. The re- pressure drop in the opposite
stroke position once the drive is sidual pressure that is enclosed on chamber to less than the locking
brought mechanically into its end the locking side of the cylinder can pressure, the locking piston will
position. release the locking function.

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 49

Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Data sheet
Operating and environmental conditions
Piston @ 20 25 32 40 50 63 80 100
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating/ Lubricated operation possible (in which case lubricated operation will always be required)
pilot medium
Operating pressure [MPa] 0.25 ... 1 0.15 ... 1
[bar] 2.5 ... 10 1.5 ... 10
Ambient temperature1) [°C] –20 ... +80
Corrosion resistance class CRC2) 2

1) Note operating range of proximity sensors

2) Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment.

Forces [N]
Piston @ 20 25 32 40 50 63 80 100
Theoretical force at 6 bar, advancing 188 295 483 754 1178 1870 3016 4712
Theoretical force at 6 bar, retracting 141 247 415 686 1057 1750 2827 4524
Static holding force 250 500 2000 5000

Sizing example
Assuming: Example with 32 mm piston diameter:
-H- Note Mounting position = vertical Theoretical force at 6 bar, advancing = 483 N
When sizing pneumatic cylinders it is Workpiece load = 44 kg 50% of the theoretical force = 241.5 N
recommended as a basic principle F = m x g = 44 kg x 9.81 m/s2 Static holding force with 32 mm piston diameter = 500 N
that only 50% of the indicated theo- = 431.6 N The static holding force of end-position locking is within the permissible range
retical forces (see above) be used (max. 500 N) for a workpiece load of 44 kg (431.6 N); however, the cylinder would
To be calculated: be at 89% capacity.
Suitable piston diameter Result:
A cylinder with a piston diameter of 40 mm is therefore recommended for this
application.

Impact energy [J]

Piston @ 20 25 32 40 50 63 80 100
Max. impact energy at the end positions 0.2 0.3 0.4 0.7 1 1.3 1.8 2.5

V Perm. impact speed

-H- Note Permissible impact speed: V=
2×E E Max. impact energy
These specifications represent the
m1 + m2
m1 Moving mass (drive)
maximum values that can be m2 Moving payload
Maximum permissible mass: 2×E
achieved. The maximum permissible =
m2 − m1
impact energy must be observed. v²

Max. lateral load Fq as a function of projection x

@ 20
@ 25
@ 32/40
@ 50/63
@ 80/100

50 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Data sheet
Weight [g]
Piston @ 20 25 32 40 50 63 80 100
End-position locking at both ends
Product weight with 0 mm stroke 234 339 518 665 1334 1734 3300 4735
Additional weight per 10 mm stroke 22 26 29 38 51 59 79 98

Moving mass with 0 mm stroke 43 53 85 101 199 248 475 637

Additional mass per 10 mm stroke 6 6 9 9 16 16 25 25

End-position locking at front

Product weight with 0 mm stroke 177 248 387 498 922 1228 2296 3448
Additional weight per 10 mm stroke 22 26 29 38 51 59 79 98

Moving mass with 0 mm stroke 35 46 75 98 175 225 464 626

Additional mass per 10 mm stroke 6 6 9 9 16 16 25 25

End-position locking at rear

Product weight with 0 mm stroke 181 252 380 505 920 1217 2233 3409
Additional weight per 10 mm stroke 22 26 29 38 51 59 79 98

Moving mass with 0 mm stroke 37 45 73 89 168 217 413 582

Additional mass per 10 mm stroke 6 6 9 9 16 16 25 25

Materials
Sectional view

1 2 3 1

Compact cylinder
[1] Cover Anodised aluminium
[2] Cylinder barrel Anodised aluminium
[3] Piston rod High-alloy steel
[4] Flange screws @ 20 ... 63 Galvanised steel
@ 80 ... 100 Standard screws, galvanised steel
– Seals Polyurethane, nitrile rubber
Note on materials RoHS-compliant

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 51

Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Data sheet
Dimensions – Basic version Download CAD data a www.festo.com
ELB – End-position locking at both ends
@ 20 ... 63
@ 32 ... 63 @ 20 ... 25

+ = plus stroke length

@ 80 ... 100

+ = plus stroke length

ELV – End-position locking at front ELH – End-position locking at rear

+ = plus stroke length

52 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Data sheet
@ BG D1 D2 D5 E EE G G1 H1 J2 L4 L5
min. @ @ @
[mm] H9
20 9 35.5 +0.3 25 45.5 18.5 12.5
M5 12 2.6
25 39.5 +0.3 29.5 53.3 20.8 14
18 9 9F9
32 13 47 +0.3 58 6
33 22.5 15
40 54.5 +0.3 61.8
15 8
50 65.5 +0.3 77 20.5
20 12F9 G1/8 43 27.5
63 75.5 +0.3 82 21.7
20 12 11.5
80 95.5 +0.6 55 16.5 103.5 34 25
30 15
100 113.5 +0.6 57 21.5 113.5 20 35 27

@ LA MM PL PL1 RT SF T2 TG ZA ZB
@ ±0.3 +1.2
[mm] +0.2 h13 +0.1 ±0.2 ELB ELV, ELH ELB ELV, ELH
20 22 63 50 68.8 55.5
10 6 6 M5 9
25 26 74 56.5 79.5 62
2.1
32 32.5 80 62 86 68
5 12 16 M6 10
40 38 81 63 87.1 69
50 8.2 46.5 101 73 109.2 81.2
16 21 M8 13
63 56.5 105 77 113.1 85.1
2.6
80 72 131 92.5 139.9 101.4
2.6 20 28 M10 17
100 10.5 89 138 102.5 147 111.5

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 53

Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
Basic version

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

K2 – Extended male piston rod thread

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

K5 – Special piston rod thread

+ = plus stroke length

K8 – Extended piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

54 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Data sheet
@ A A1 A2 AF AF5 KF KF5

[mm] –0.5 min. min.

20
16 1 ... 300 14 12 M6 M5
25
32
19 1 ... 20 16 14 M8 M6
40
1 ... 400
50
22 16 M10 M8
63
20
80
28 1 ... 30 1 ... 500 20 M12 M10
100

@ KK KK5 T3 T4 WH ZB
+1.2
[mm] +1.3 ELB ELV, ELH
20 M10x1.25 68.8 55.5
M8 2 2.6 5.5
25 M10 79.5 62
32 M10 6 86 68
M10x1.25 2.6 3.3
40 M12 6.1 87.1 69
50 M12 8.2 109.2 81.2
M12x1.25 3.3 4.7
63 M16 8.1 113.1 85.1
80 M16 8.9 139.9 101.4
100 M16x1.5 M20x1.5 4.7 6.1
9 147 111.5
M20

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 55

Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Ordering data – Modular product system

Ordering table
Size 20 25 32 40 Conditions Code Enter code
Module no. 548214 548215 548216 548217
Function Compact cylinder, double-acting, standard hole pattern, ADN ADN
with end-position locking
Piston @ [mm] 20 25 32 40 -...
Stroke [mm] 10 ... 300 10 ... 400 -...
End-position locking At both ends -ELB
At front -ELV
At rear -ELH
Piston rod thread Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 -...K2
Special piston rod Male thread M10x1.25 M10x1.25 M10 M10 -“...”K5
thread M10 M10 M12 M12

Female thread M5 M5 M6 M6
Extended piston rod Extended piston rod
[mm] 1 ... 300 1 ... 400 [2] -...K8
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

[2] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length

56 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN-EL, standard hole pattern, with end-position locking

Ordering data – Modular product system

Ordering table
Size 50 63 80 100 Conditions Code Enter code
Module no. 548218 548219 548220 548221
Function Compact cylinder, double-acting, standard hole pattern, ADN ADN
with end-position locking
Piston @ [mm] 50 63 80 100 -...
Stroke [mm] 10 ... 400 10 ... 500 -...
End-position locking At both ends -ELB
At front -ELV
At rear -ELH
Piston rod thread Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 1 ... 30 -...K2
Special piston rod Male thread M12 M12 M16 M16 -“...”K5
thread M16 M16 M20 M20
M20x1.5 M20x1.5
Female thread M8 M8 M10 M10
Extended piston rod Extended piston rod
[mm] 1 ... 400 1 ... 500 [2] -...K8
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

[2] K8 The sum of the stroke length and piston rod extension must not exceed the maximum permissible stroke length

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 57

Compact cylinders AEN, to ISO 21287

Type codes
001 Series 008 Piston rod thread extension
AEN Compact cylinder, single-acting, based on ISO 21287 None
...K2 1 ... 30 mm
002 Piston diameter
12 12 009 Custom thread
16 16 “M6”K5 M6
20 20 “M8”K5 M8
25 25 “M10”K5 M10
32 32 “M10x1,25”K5 M10x1.25
40 40 “M12”K5 M12
50 50 “M16”K5 M16
63 63 “M20x1,5”K5 M20x1.5
80 80 “M5”K5 M5
100 100 “M20”K5 M20

003 Stroke 010 Piston rod extension

... 1 ... 25 None
...K8 1 ... 25 mm
004 Piston rod thread type
Male thread 011 Improved running performance
F Female thread None
K10 Smooth anodised aluminium coated piston rod
005 Cushioning
P Elastic cushioning rings/plates on both sides 012 Temperature resistance
Standard
006 Position sensing S6 Heat-resistant seals max. 120 °C
A For proximity sensor
013 Captive rating plate
007 Active direction Rating plate, glued
Z Single-acting, pulling TL Laser etched rating plate
Single-acting, pushing

58 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders AEN, to ISO 21287

Data sheet
Function Variants

S6

K2

Pulling
K5 AEN- ... -A-P-A
-N- Diameter
12 ... 100 mm
K8

-T- Stroke length

1 ... 25 mm K10

-É- www.festo.com Q
AEN- ... -A-P-A-Z

General technical data

Piston @ 12 16 20 25 32 40 50 63 80 100
Design Piston
Piston rod
Cylinder barrel
Cushioning Elastic cushioning rings/plates at both ends
Position sensing Via proximity sensor
Type of mounting Via through-hole
Via female thread
Via accessories
Mounting position Any

Technical data – Basic version and variants

Piston @ 12 16 20 25 32
Pneumatic connection M5 M5 M5 M5 G1/8
Female piston rod thread
– M3 M4 M6 M6 M8
K5 – – M5 M5 M6
Male piston rod thread
– M5 M6 M8 M8 M10x1.25
K5 M6 M8 M10; M10x1.25 M10; M10x1.25 M10; M12
Q-K5 – M8 M10; M10x1.25 M10; M10x1.25 M10

Piston @ 40 50 63 80 100
Pneumatic connection G1/8 G1/8 G1/8 G1/8 G1/8
Female piston rod thread
– M8 M10 M10 M12 M12
K5 M6 M8 M8 M10 M10
Male piston rod thread
– M10x1.25 M12x1.25 M12x1.25 M16x1.5 M16x1.5
K5 M10; M12 M12; M16 M12; M16 M16; M20; M20x1.5 M16; M20; M20x1.5
Q-K5 M10 M12 M12 M16 M16

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 59

Compact cylinders AEN, to ISO 21287

Data sheet
Operating and environmental conditions
Piston @ 12 16 20 25 32 40 50 63 80 100
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating/ Lubricated operation possible (in which case lubricated operation will always be required)
pilot medium
Operating pressure [bar]
[MPa]
– 0.15 ... 1 0.1 ... 1
Z 0.17 ... 1 0.22 ... 1 0.13 ... 1 0.07 ... 1 0.06 ... 1
Q 0.15 ... 1 0.1 ... 1
[bar]
– 1.5 ... 10 1 ... 10
Z 1.7 ... 10 2.2 ... 10 1.3 ... 10 0.7 ... 10 0.6 ... 10
Q 1.5 ... 10 1 ... 10
Ambient temperature1) [°C]
– –20 ... +80
S6 0 ... +120
Corrosion resistance class CRC2) 2

1) Note operating range of proximity sensors

2) Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment.

Forces [N] and impact energy [J]

Piston @ 12 16 20 25 32 40 50 63 80 100
AEN
Theoretical force at 6 bar, a­ dvancing 56 95 162 259 441 702 1098 1783 2899 4511

AEN-...-Z, pulling
Theoretical force at 6 bar, retracting 39 65 115 211 373 634 977 1663 2610 4323
Max. impact energy at the ­end positions 0.04 0.04 0.04 0.08 0.1 0.15 0.18 0.28 0.35 0.7

V Perm. impact speed

-H- Note Permissible impact speed: V=
2×E E Max. impact energy
These specifications represent the
m1 + m2
m1 Moving mass (drive)
maximum values that can be m2 Moving payload
Maximum permissible mass: 2×E
achieved. The maximum permissible =
m2 − m1
impact energy must be observed. v²

Spring return force F as a function of stroke l

@ 12 ... 20 @ 25 ... 100

@ 25
@ 32
@ 40
@ 50
@ 12 @ 63
@ 16 @ 80
@ 20 @ 100

-H- Note
The degree of friction depends on the mounting position and the type of load
involved. Single-acting cylinders should as far as possible be operated without
lateral loads.

60 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders AEN, to ISO 21287

Data sheet
Weight [g]
Piston @ 12 16 20 25 32 40 50 63 80 100
Product weight with 0 mm stroke 77 79 131 156 265 346 540 722 1300 2154
Additional weight per 10 mm stroke 12 14 21 23 30 37 51 59 79 98

Moving mass with 0 mm stroke 9 15 30 50 60 80 140 180 400 570

Additional mass per 10 mm stroke 2 4 6 6 9 9 16 16 25 25

Materials
Sectional view

1 2 3 1

Compact cylinder Basic version S6

[1] Cover @ 12 ... 80 Anodised aluminium
@ 100 Coated die-cast aluminium
[2] Cylinder barrel Anodised aluminium
[3] Piston rod High-alloy steel
[4] Flange screws @ 12 ... 16 High-alloy steel
@ 20 ... 63 Galvanised steel
@ 80 ... 100 Standard screws, galvanised steel
– Seals Polyurethane Fluoro rubber
Note on materials RoHS-compliant

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 61

Compact cylinders AEN, to ISO 21287

Data sheet
Dimensions – Basic version Download CAD data a www.festo.com
@ 12 ... 63

@ 32 ... 63 @ 12 ... 25 @ 12

+ = plus stroke length

@ 80 ... 100

+ = plus stroke length

62 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders AEN, to ISO 21287

Data sheet
@ BG D1 D5 E EE G J2 J3 LA
@ @
[mm] min. H9 +0.2
12 27.5 +0.3 10.5 2 –
17 6F9 3.5
16 29 +0.3 11
M5
20 35.5 +0.3 2.6
19.5 9 12
25 39.5 +0.3
9F9
32 47 +0.3 6
26 5
40 54.5+0.3
15 8
50 65.5 +0.3
27 12F9 G1/8
63 75.5 +0.3
12 11.5
80 17 95.5 +0.6 16.5
15 2.6
100 21.5 113.5 +0.6 21.5 20

@ MM PL RT SF T2 TG ZA ZB
@
[mm] +0.2 h13 +0.1 ±0.2 ±0.3 +1.2
12 6 5 16 39.2
M4 35
16 8 7 18 39.7
6
20 22 37 42.5
10 M5 9 2.1
25 26 39 44.5
32 32.5 44 50
12 M6 10
40 38 51.1
45
50 8.2 46.5 53.2
16 M8 13
63 56.5 49 57.1
2.6
80 72 54 62.9
20 M10 17
100 10.5 89 67 76

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 63

Compact cylinders AEN, to ISO 21287

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
Basic version

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

Z – Pulling

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

++ = plus 2x stroke length
K2 – Extended male piston rod thread

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

K5 – Special piston rod thread

+ = plus stroke length

K8 – Extended piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

64 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders AEN, to ISO 21287

Data sheet
@ A A1 A2 AF AF5 KF KF5

[mm] –0.5 min. min.

12 10 8 M3
1 ... 10 – –
16 12 10 M4
1 ... 300
20
16 14 12 M6 M5
25
32
19 1 ... 20 16 14 M8 M6
40
1 ... 400
50
22 16 M10 M8
63
20
80
28 1 ... 30 1 ... 500 20 M12 M10
100

@ KK KK5 T3 T4 WH ZB

[mm] +1.3 +1.2

12 M5 M6 4.2 39.2
– 1.5
16 M6 M8 4.7 39.7
20 M10x1.25 42.5
M8 2 2.6 5.5
25 M10 44.5
32 M10 6 50
M10x1.25 2.6 3.3
40 M12 6.1 51.1
50 M12 8.2 53.2
M12x1.25 3.3 4.7
63 M16 8.1 57.1
80 M16 8.9 62.9
100 M16x1.5 M20x1.5 4.7 6.1
9 76
M20

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 65

Compact cylinders AEN, to ISO 21287

Data sheet
Dimensions – Variants Download CAD data a www.festo.com
Q – Square piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

++ = plus 2x stroke length

Q – Z – Pulling

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

Q-K2 – Square piston rod with extended male thread

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

Q-K5 – Square piston rod with special thread

+ = plus stroke length

Q-K8 – Square, extended piston rod

[1] Hex nut DIN 439-B

only with @ 32 ... 100

+ = plus stroke length

66 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders AEN, to ISO 21287

Data sheet
@ A A1 A2 AF3 B1 KF3
™
[mm] –0.5 min.
16 12 1 ... 10 10 7 M4
20 1 ... 300
16 12 9 M5
25
32
19 1 ... 20 14 10 M6
40
1 ... 400
50
22 16 12 M8
63
80
28 1 ... 30 1 ... 500 20 16 M10
100

@ KK KK5 T2 WH ZB

[mm] +1.3 +1.2

16 M6 M8 1.5 4.7 39.7
20 M10x1.25 42.5
M8 2 5.5
25 M10 44.5
32 6 50
M10x1.25 M10 2.6
40 6.1 51.1
50 8.2 53.2
M12x1.25 M12 3.3
63 8.1 57.1
80 8.9 62.9
M16x1.5 M16 4.7
100 9 76

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 67

Compact cylinders AEN, to ISO 21287

Ordering data – Modular product system, basic sensor and variants

Ordering table
Size 12 16 20 25 32 Conditions Code Enter code
Module no. 536414 536415 536416 536417 536418
Function Compact cylinder, single-acting, based on ISO 21287 AEN AEN
Piston @ [mm] 12 16 20 25 32 -...
Stroke [mm] 1 ... 10 1 ... 25 -...
Thread type Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Effective direction Single-acting, pulling -Z
Extended male thread Extended male piston rod thread
[mm] 1 ... 10 1 ... 20 [2] -...K2
Special piston Male thread M6 M8 M10x1.25 M10x1.25 M10 [2] -“...”K5
rod thread M10 M10 M12

Female thread – – M5 M5 M6
Extended piston rod Extended piston rod
[mm] 1 ... 10 1 ... 25 -...K8
Improved running performance – – Smooth anodised aluminium piston rod -K10
Temperature resistance Heat-resistant seals max. 120°C -S6
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

[2] K2, K5 Not with improved running performance K10

68 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders AEN, to ISO 21287

Ordering data – Modular product system, basic sensor and variants

Ordering table
Size 40 50 63 80 100 Conditions Code Enter code
Module no. 536419 536420 536421 536422 536423
Function Compact cylinder, single-acting, based on ISO 21287 AEN AEN
Piston @ [mm] 40 50 63 80 100 -...
Stroke [mm] 1 ... 25 -...
Thread type Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Effective direction Single-acting, pulling -Z
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 1 ... 30 [2] -...K2
Special piston Male thread M10 M12 M12 M16 M16 [2] -“...”K5
rod thread M12 M16 M16 M20 M20
M20x1.5 M20x1.5
Female thread M6 M8 M8 M10 M10
Extended piston rod Extended piston rod
[mm] 1 ... 25 -...K8
Improved running performance Smooth anodised aluminium piston rod -K10
Temperature resistance Heat-resistant seals max. 120°C -S6
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

[2] K2, K5 Not with improved running performance K10

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 69

Compact cylinders AEN, to ISO 21287

Ordering data – Modular product system, Q – Square piston rod, non-rotating

Ordering table
Size 16 20 25 32 Conditions Code Enter code
Module no. 536415 536416 536417 536418
Function Compact cylinder, single-acting, based on ISO 21287 AEN AEN
Piston @ [mm] 16 20 25 32 -...
Stroke [mm] 1 ... 25 -...
Thread type Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Effective direction Single-acting, pulling -Z
Protection against rotation Square piston rod -Q -Q
Extended male thread Extended male piston rod thread
[mm] 1 ... 10 1 ... 20 -...K2
Special piston Male thread M8 M10x1.25 M10x1.25 M10 -“...”K5
rod thread M10 M10
Extended piston rod Extended piston rod
[mm] 1 ... 25 -...K8
Temperature resistance Heat-resistant seals max. 120°C -S6
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

70 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders AEN, to ISO 21287

Ordering data – Modular product system, Q – Square piston rod, non-rotating

Ordering table
Size 40 50 63 80 100 Conditions Code Enter code
Module no. 536419 536420 536421 536422 536423
Function Compact cylinder, single-acting, based on ISO 21287 AEN AEN
Piston @ [mm] 40 50 63 80 100 -...
Stroke [mm] 1 ... 25 -...
Thread type Male thread -A
Female thread [1] -I
Cushioning Elastic cushioning rings/plates at both ends -P -P
Position sensing Via proximity sensor -A -A
Effective direction Single-acting, pulling -Z
Protection against rotation Square piston rod -Q -Q
Extended male thread Extended male piston rod thread
[mm] 1 ... 20 1 ... 30 -...K2
Special piston Male thread M10 M12 M12 M16 M16 -“...”K5
rod thread
Extended piston rod Extended piston rod
[mm] 1 ... 25 -...K8
Temperature resistance Heat-resistant seals max. 120°C -S6
Captive rating plate Laser-etched rating plate -TL

[1] I Not with extended male thread K2

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 71

Compact cylinders ADN/AEN, to ISO 21287

Accessories
Foot mounting HNA/HNA- ...-R3

Material:
HNA: galvanised steel
HNA-...-R3: steel,
with protective coating
Free of copper and PTFE
RoHS-compliant

+ = plus stroke length

Dimensions and ordering data

For @ AB AH AO AT AU SA TR US XA
@
[mm] H14 JS14 ±0.5 ±0.2 ±0.2 –0.5
12 21 5 16 26 52.2
5.8 3 13 61
16 22 4.75 18 27.5 52.9
20 27 69 22 34.5 58.7
6.25
25 7 29 16 71 26 38.5 60.7
4
32 33.5 7 76 32 46 66.2
40 38 9 18 81 36 54 69.2
50 10 45 87 45 64 74.2
8 5 21
63 50 91 50 75 78.2
80 12 63 10.5 26 106 63 93 89
6
100 14.5 74 12.5 27 121 75 110 103

For @ Basic version R3 – High corrosion protection

CRC1) Weight Part no. Type CRC1) Weight Part no. Type
[mm] [g] [g]
12 1 39 537237 HNA-12 3 39 537252 HNA-12-R3
16 1 42 537238 HNA-16 3 42 537253 HNA-16-R3
20 1 84 537239 HNA-20 3 84 537254 HNA-20-R3
25 1 90 537240 HNA-25 3 90 537255 HNA-25-R3
32 1 123 537241 HNA-32 3 123 537256 HNA-32-R3
40 1 157 537242 HNA-40 3 157 537257 HNA-40-R3
50 1 278 537243 HNA-50 3 278 537258 HNA-50-R3
63 1 328 537244 HNA-63 3 328 537259 HNA-63-R3
80 1 634 537249 HNA-80 3 634 537260 HNA-80-R3
100 1 814 537250 HNA-100 3 814 537261 HNA-100-R3

1) Corrosion resistance class CRC 1 to Festo standard FN 940070

Low corrosion stress. Dry indoor application or transport and storage protection. Also applies to parts behind coverings, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions).
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. Externally visible parts with primarily functional surface requirements which are in direct contact with a normal industrial environment.

72 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN/AEN, to ISO 21287

Accessories
Flange mounting FNC

Material:
Galvanised steel
Free of copper and PTFE
RoHS-compliant

+ = plus stroke length

Dimensions and ordering data

For @ E FB MF R TF UF ZF CRC1) Weight Part no. Type
@
[mm] ±1 [g]
12 28 40 50 47.2 1 79 537245 FNC-12
5.5
16 29 43 55 47.9 1 88 537246 FNC-16
8 –
20 36 55 70 50.7 1 141 537247 FNC-20
6.6
25 40 60 76 52.7 1 165 537248 FNC-25
32 45 7 32 64 80 60.2 1 221 q 174376 FNC-32
10
40 54 36 72 90 61.2 1 291 q 174377 FNC-40
50 65 9 45 90 110 65.2 1 536 q 174378 FNC-50
12
63 75 50 100 120 69.2 1 679 q 174379 FNC-63
80 93 12 63 126 150 79 1 1495 q 174380 FNC-80
16
100 110 14 75 150 175 92 1 2041 174381 FNC-100
125 132 16 20 90 180 210 112 1 3775 174382 FNC-125

1) Corrosion resistance class CRC 1 to Festo standard FN 940070

Low corrosion stress. Dry indoor application or transport and storage protection. Also applies to parts behind coverings, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions).

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 73

Compact cylinders ADN/AEN, to ISO 21287

Accessories
Swivel flange
SNCL/SNCL- ...-R3

Material:
SNCL 12 ... 25:
Wrought aluminium alloy
SNCL 32 ... 125:
Die-cast aluminium
SNCL-...-R3: wrought aluminium alloy
+ = plus stroke length
with protective coating
Free of copper and PTFE
RoHS-compliant

Dimensions and ordering data

For @ CD E EW FL L MR TG XC
@
[mm] H9 ±0.2
12 25–0.6 16 55.2
6 12h12 16 10 6
16 27.5–0.6 18 55.9
20 34.5–0.6 22 62.7
8 16h12 20 14 8
25 38.5–0.6 26 64.7
32 10 45+0.2/–0.5 26–0.2/–0.6 22 13 10 32.5 72.2
40 54–0.5 28–0.2/–0.6 25 38 75.2
12 16 12
50 64–0.6 32–0.2/–0.6 27 46.5 80.2
63 75–0.6 40–0.2/–0.6 32 21 56.5 89.2
16 16
80 93–0.8 50–0.2/–0.6 36 22 72 99
100 20 110–+0.3/–0.8 60–0.2/–0.6 41 27 20 89 117
125 25 131–0.8 70–0.2/–0.6 50 30 25 110 142

For @ Basic version R3 – High corrosion protection

CRC1) Weight Part no. Type CRC1) Weight Part no. Type
[mm] [g] [g]
12 2 20 537790 SNCL-12 3 20 537794 SNCL-12-R3
16 2 21 537791 SNCL-16 3 21 537795 SNCL-16-R3
20 2 38 537792 SNCL-20 3 38 537796 SNCL-20-R3
25 2 41 537793 SNCL-25 3 41 537797 SNCL-25-R3
32 1 71 q 174404 SNCL-32 – – –
40 1 95 q 174405 SNCL-40 – – –
50 1 158 q 174406 SNCL-50 – – –
63 1 225 q 174407 SNCL-63 – – –
80 1 436 q 174408 SNCL-80 – – –
100 1 606 174409 SNCL-100 – – –
125 1 1135 174410 SNCL-125 – – –

1) Corrosion resistance class CRC 1 to Festo standard FN 940070

Low corrosion stress. Dry indoor application or transport and storage protection. Also applies to parts behind coverings, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions).
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment.
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. Externally visible parts with primarily functional surface requirements which are in direct contact with a normal industrial environment.

74 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN/AEN, to ISO 21287

Accessories
Swivel flange
SNCS/CRSNCS/SNCS- ...-R3

Material:
SNCS 32 ... 50: Die-cast aluminium
SNCS 63 ... 125: Wrought ­aluminium
alloy
CRSNCS 32 ... 80:
High-alloy stainless steel
+ = plus stroke length
SNCS-...-R3 100 ... 125:
Wrought aluminium alloy with
protective coating
RoHS-compliant

Dimensions and ordering data

For @ CN E EP EX FL
@
[mm] ADN-... ADN-...-R3 ADN-... ADN-...-R3 ±0.2 ±0.2
32 10+0.013 10+0.015/–0.04 45+0.2/–0.5 45–0.5 10.5 14 22
40 12+0.015 12+0.018/–0.04 54–0.5 54–0.5 12 16 25
50 16+0.015 16+0.018/–0.04 64–0.6 64–0.6 15 21 27
63 16+0.015 16+0.018/–0.04 74.5±0.5 75–0.6 15 21 32
80 20+0.018 20+0.021/–0.04 92.2±0.8 93–0.8 18 25 36
100 20+0.018 20+0.021/–0.04 109+1/–0.7 109+1/–0.7 18 25 41
125 30+0.018 30+0.021/–0.04 132+1/–0.7 132+1/–0.7 25 37 50

For @ LT MS RA TG XC
ADN-... ADN-...-R3 ADN-... ADN-...-R3
[mm] +1 +1
32 13 15+0.5 15+0.5 14.5 14.5 32.5 72.2
40 16 17+0.5 17+0.5 17.5 17.5 38 75.2
50 16 20+0.5 20+0.5 18.5 19 46.5 80.2
63 21 23–0.5 22+0.5 23 23 56.5 89.2
80 22 28–0.5 27+0.5 25 25 72 99
100 27 30±0.5 30±0.5 95 100 89 117
125 30 39±0.5 39±0.5 100 100 110 142

For @ Basic version High corrosion protection

CRC1) Weight Part no. Type CRC1) Weight Part no. Type
[mm] [g] [g]
32 1 86 q 174397 SNCS-32 4 161 2895920 CRSNCS-32
40 1 122 q 174398 SNCS-40 4 239 2895921 CRSNCS-40
50 1 216 q 174399 SNCS-50 4 403 2895922 CRSNCS-50
63 2 281 q 174400 SNCS-63 4 576 2895923 CRSNCS-63
80 2 557 q 174401 SNCS-80 4 1173 2895924 CRSNCS-80
100 2 683 174402 SNCS-100 3 684 2895925 SNCS-100-R3
125 2 1369 174403 SNCS-125 3 1369 2895926 SNCS-125-R3

1) Corrosion resistance class CRC 1 to Festo standard FN 940070

Low corrosion stress. Dry indoor application or transport and storage protection. Also applies to parts behind coverings, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions).
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment.
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. Externally visible parts with primarily functional surface requirements which are in direct contact with a normal industrial environment.
Corrosion resistance class CRC 4 to Festo standard FN 940070
Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, e.g. in the chemical or food industries. Such applications may need to be safeguarded by means of special
testing (d also FN 940082), using appropriate media.

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 75

Compact cylinders ADN/AEN, to ISO 21287

Accessories
Clevis foot LBG/LBG- ...-R3
The pivot pin is secured against
rotation with a spring pin.

Material:
LBG 32 ... 63: Stainless steel casting
LBG 80 ... 125: Spheroidal graphite
cast iron
LBG-...-R3: High-alloy stainless steel
Free of copper and PTFE
RoHS-compliant

Dimensions and ordering data

For @ BR CB CK D3 GL HB L2 LE PH RA TE UB UL UR
@ @ @
[mm] ADN-...-R3
32 12 12 14.1 10 4.8 16 6.8 35 24 32 20 42 28 56 36
40 14 14 16.1 12 5.8 20 6.8 39 26 36 26 44 30 58 41.5
50 15 15 21.1 16 5.8 25 9.2 50 33 45 31 56 40 70 47
63 17 17 21.1 16 7.8 25 9.2 50 38 50 31 56 40 70 49
80 17 17 25.1 20 7.8 30 11 60 49 63 36 70 50 89 55
100 20 22 25.1 20 9.8 41 11 60 56 71 46 70 50 89 65
125 25 25 37.2 30 11.8 60 14 89 70 90 70 106 80 128 96

For @ Basic version R3 – High corrosion protection

CRC1) Weight Part no. Type CRC1) Weight Part no. Type
[mm] [g] [g]
32 2 220 31761 LBG-32 3 220 2078790 LBG-32-R3
40 2 300 31762 LBG-40 3 300 2078792 LBG-40-R3
50 2 540 31763 LBG-50 3 540 2078794 LBG-50-R3
63 2 580 31764 LBG-63 3 580 2078795 LBG-63-R3
80 2 1050 31765 LBG-80 3 1050 2078797 LBG-80-R3
100 2 1375 31766 LBG-100 3 1375 2078799 LBG-100-R3
125 2 4140 31767 LBG-125 3 4140 2078837 LBG-125-R3

1) Corrosion resistance class CRC 2 to Festo standard FN 940070

Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment.
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. Externally visible parts with primarily functional surface requirements which are in direct contact with a normal industrial environment.

76 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN/AEN, to ISO 21287

Accessories
Multi-position kit DPNA

Material:
Flange:
Wrought aluminium alloy
Screws: Galvanised steel
Free of copper and PTFE
RoHS-compliant

+ = plus stroke length

Dimensions and ordering data

For @ L2 B1 Max. CRC1) Weight Part no. Type1)
overall stroke length
[mm] [mm] [g]
12 600 2 28 537263 DPNA-12
35
16 33 537264 DPNA-16
13
20 37 50 537265 DPNA-20
-H- Note 25 39 60 537266 DPNA-25
32 44 800 99 537267 DPNA-32
The maximum overall stroke length 40 129 537268 DPNA-40
45 15
must not be exceeded when combin- 50 16 537269 DPNA-50
ing cylinders and multi-position kits. 63 49 249 537270 DPNA-63
80 54 17 1000 474 537271 DPNA-80
100 67 19.5 712 537272 DPNA-100

1) Corrosion resistance class CRC 2 to Festo standard FN 940070

Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct
contact with a normal industrial environment.

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 77

Compact cylinders ADN/AEN, to ISO 21287

Accessories
Clevis foot LBN

Material:
Galvanised steel
Free of copper and PTFE
RoHS-compliant

Dimensions and ordering data

For @ CM EK FL GL HB LE MR RG UX CRC1) Weight Part no. Type
@ @
[mm] [g]
12/16 12.1 6 27 +0.3/–0.2 13 5.5 24 7 15 25 1 40 q 6058 LBN-12/16
20/25 16.1 8 30 +0.4/–0.2 16 6.6 26 10 20 32 1 84 q 6059 LBN-20/25

1) Corrosion resistance class CRC 1 to Festo standard FN 940070

Low corrosion stress. Dry indoor application or transport and storage protection. Also applies to parts behind coverings, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions).

Clevis foot CRLBN, stainless steel

Material:
High-alloy steel
Free of copper and PTFE
RoHS-compliant

Dimensions and ordering data

For @ CM EK FL GL HB LE MR RG UX CRC1) Weight Part no. Type
@
[mm] [g]
12/16 12.1 6 27 +0.3/–0.2 13 5.5 24 7 15 25 4 39 161862 CRLBN-12/16
20/25 16.1 8 30 +0.4/–0.2 16 6.6 26 10 20 32 4 82 161863 CRLBN-20/25

1) Corrosion resistance class CRC 4 to Festo standard FN 940070

Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, e.g. in the chemical or food industries. Such applications may need to be safeguarded by means of special
testing (d also FN 940082), using appropriate media.

78 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN/AEN, to ISO 21287

Accessories
Swivel flange
SNCB/SNCB- ...-R3

Material:
SNCB: Die-cast aluminium
SNCB-...-R3: Die-cast aluminium with
protective coating
Free of copper and PTFE
RoHS-compliant
+ = plus stroke length

Dimensions and ordering data

For @ CB E EK FL L MR TG UB XC
@
[mm] H14 H9/e8 ±0.2 –0.5 h14
32 26 45+0.2/–0.5 10 22 13 8.5 32.5 45 72
40 28 54–0.5 12 25 16 12 38 52 76
50 32 64–0.6 12 27 16 12 46.5 60 80
63 40 75–0.6 16 32 21 16 56.5 70 89
80 50 93–0.8 16 36 22 16 72 90 99
100 60 110+0.3/–0.8 20 41 27 20 89 110 117
125 70 131–0.8 25 50 30 25 110 130 142

For @ Basic version R3 – High corrosion protection

CRC1) Weight Part no. Type CRC1) Weight Part no. Type
[mm] [g] [g]
32 1 103 q 174390 SNCB-32 3 100 176944 SNCB-32-R3
40 1 155 q 174391 SNCB-40 3 151 176945 SNCB-40-R3
50 1 233 q 174392 SNCB-50 3 228 176946 SNCB-50-R3
63 1 375 q 174393 SNCB-63 3 371 176947 SNCB-63-R3
80 1 636 q 174394 SNCB-80 3 632 176948 SNCB-80-R3
100 1 1035 174395 SNCB-100 3 986 176949 SNCB-100-R3
125 1 1860 174396 SNCB-125 3 1776 176950 SNCB-125-R3

1) Corrosion resistance class CRC 1 to Festo standard FN 940070

Low corrosion stress. Dry indoor application or transport and storage protection. Also applies to parts behind coverings, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions).
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. Externally visible parts with primarily functional surface requirements which are in direct contact with a normal industrial environment.

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 79

Compact cylinders ADN/AEN, to ISO 21287

Accessories
Trunnion flange ZNCF/CRZNG

Material:
ZNCF: Stainless steel casting
CRZNG: Electropolished stainless steel
casting
Free of copper and PTFE
RoHS-compliant

Dimensions and ordering data

For @ C2 C3 TD TK TL TM US XH XL
@
[mm] e9
32 71 86 12 16 12 50 45 2 58
40 87 105 16 20 16 63 54 4 61.1
50 99 117 16 24 16 75 64 4 64.7
63 116 136 20 24 20 90 75 4 68.5
80 136 156 20 28 20 110 93 5 76.9
100 164 189 25 38 25 132 110 10 95
125 192 217 25 50 25 160 131 14 117

For @ Basic version R3 – High corrosion protection

CRC1) Weight Part no. Type CRC1) Weight Part no. Type
[mm] [g] [g]
32 2 150 174411 ZNCF-32 4 150 161852 CRZNG-32
40 2 285 174412 ZNCF-40 4 285 161853 CRZNG-40
50 2 473 174413 ZNCF-50 4 473 161854 CRZNG-50
63 2 687 174414 ZNCF-63 4 687 161855 CRZNG-63
80 2 1296 174415 ZNCF-80 4 1296 161856 CRZNG-80
100 2 2254 174416 ZNCF-100 4 2254 161857 CRZNG-100
125 2 3484 174417 ZNCF-125 4 3484 185362 CRZNG-125

1) Corrosion resistance class CRC 2 to Festo standard FN 940070

Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment.
Corrosion resistance class CRC 4 to Festo standard FN 940070
Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, e.g. in the chemical or food industries. Such applications may need to be safeguarded by means of special
testing (d also FN 940082), using appropriate media.

80 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN/AEN, to ISO 21287

Accessories
Trunnion support LNZG

Material:
Trunnion support: Anodised
aluminium
Plain bearing: Plastic
Free of copper and PTFE
RoHS-compliant

Dimensions and ordering data

For @ CR DA FK FN FS H1 HB KE NH TH UL CRC1) Weight Part no. Type
@ @ @ @
[mm] D11 H13 ±0.1 H13 ±0.2 [g]
32 12 11 15 30 10.5 15 6.6 6.8 18 32 46 2 83 32959 LNZG-32
40, 50 16 15 18 36 12 18 9 9 21 36 55 2 129 32960 LNZG-40/50
63, 80 20 18 20 40 13 20 11 11 23 42 65 2 178 32961 LNZG-63/80
100, 125 25 20 25 50 16 24.5 14 13 28.5 50 75 2 306 32962 LNZG-100/125

1) Corrosion resistance class CRC 2 to Festo standard FN 940070

Moderate corrosion stress. Indoor applications in which condensation can occur. External visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment.

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 81

Compact cylinders ADN/AEN, to ISO 21287

Accessories
Ordering data – Piston rod attachments Data sheets a Internet: piston rod attachment
Designation For @ Part no. Type Designation For @ Part no. Type

Rod eye SGS Rod clevis SGA for rod eye SGS
16 q 9254 SGS-M6 12, 16, 20, 25 –
20, 25 q 9255 SGS-M8 32, 40 32954 SGA-M10x1.25
32, 40 q 9261 SGS-M10x1.25 50, 63 10767 SGA-M12x1.25
50, 63 q 9262 SGS-M12x1.25 80, 100 10768 SGA-M16x1.25
80, 100 q 9263 SGS-M16x1.5 125 10769 SGA-M20x1.25
125 q 9264 SGS-M20x1.5
Self-aligning rod coupler FK
Rod clevis SG 12 30984 FK-M5
12 – 16 q 2061 FK-M6
16 q 3110 SG-M6 20, 25 q 2062 FK-M8
20, 25 q 3111 SG-M8 32, 40 q 6140 FK-M10x1.25
32, 40 q 6144 SG-M10x1.25 50, 63 q 6141 FK-M12x1.25
50, 63 q 6145 SG-M12x1.25 80, 100 q 6142 FK-M16x1.5
80, 100 q 6146 SG-M16x1.5 125 q 6143 FK-M20x1.5
125 q 6147 SG-M20x1.5

Coupling piece KSG Coupling piece KSZ

12, 16, 20, 25 – 12 –
32, 40 32963 KSG-M10x1.25 16 36123 KSZ-M6
50, 63 32964 KSG-M12x1.25 20, 25 36124 KSZ-M8
80, 100 32965 KSG-M16x1.5 32, 40 36125 KSZ-M10x1.25
125 32966 KSG-M20x1.5 50, 63 36126 KSZ-M12x1.25
80, 100 36127 KSZ-M16x1.5
Adapter AD 125 36128 KSZ-M20x1.5
12 –
16 157328 AD-M6-M5
157329 AD-M6-1/8
157330 AD-M6-1/4
20 157331 AD-M8-1/8
25 157332 AD-M8-1/4
32 157333 AD-M10x1.25-1/8
40 157334 AD-M10x1.25-1/4
50 160256 AD-M12x1.25-1/4
63 160257 AD-M12x1.25-3/8

82 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN/AEN, to ISO 21287

Accessories
Ordering data – Piston rod attachments, corrosion-resistant Data sheets a Internet: piston rod attachment
Designation For @ Part no. Type Designation For @ Part no. Type
Rod eye CRSGS Rod clevis CRSG
12 – 12 –
16 195580 CRSGS-M6 16, 20 13567 CRSG-M6
20, 25 195581 CRSGS-M8 20, 25 13568 CRSG-M8
32, 40 195582 CRSGS-M10x1.25 32, 40 13569 CRSG-M10x1.25
50, 63 195583 CRSGS-M12x1.25 50, 63 13570 CRSG-M12x1.25
80, 100 195584 CRSGS-M16x1.5 80, 100 13571 CRSG-M16x1.5
125 195585 CRSGS-M20x1.5 125 13572 CRSG-M20x1.5

Self-aligning rod coupler CRFK

32, 40 2305778 CRFK-M10x1.25
50, 63 2305779 CRFK-M12x1.25
80, 100 2490673 CRFK-M16x1.5
125 2545677 CRFK-M20x1.5

Ordering data – Mounting components Data sheets a Internet: clevis foot

Designation For @ Part no. Type Designation For @ Part no. Type
Right-angle clevis foot LQG for rod eye SGS Right-angle clevis foot LQG for rod eye SGS
32, 40 31761 LBG-32 32, 40 31768 LQG-32
50, 63 31762 LBG-40 50, 63 31769 LQG-40
80, 100 31763 LBG-50 80, 100 31770 LQG-50
31764 LBG-63 31771 LQG-63
125 31765 LBG-80 125 31772 LQG-80
31766 LBG-100 31773 LQG-100

Ordering data – Mounting components, high corrosion protection Data sheets a Internet: clevis foot
Designation For @ Part no. Type
Clevis foot LBG-R3 for rod eye CRSGS
32, 40 2078790 LBG-32-R3
50, 63 2078792 LBG-40-R3
80, 100 2078794 LBG-50-R3
2078795 LBG-63-R3
125 2078797 LBG-80-R3
2078799 LBG-100-R3

Ordering data – One-way flow control valves Data sheets a Internet: grla
Connection Material Part no. Type
For @ For tubing O.D.
For exhaust air
12, 16, 20, 25 3 Metal design q 193137 GRLA-M5-QS-3-D
4 q 193138 GRLA-M5-QS-4-D
6 q 193139 GRLA-M5-QS-6-D
32, 40, 50, 63, 80, 100 3 q 193142 GRLA-1/8-QS-3-D
4 q 193143 GRLA-1/8-QS-4-D
6 q 193144 GRLA-1/8-QS-6-D
8 q 193145 GRLA-1/8-QS-8-D
125 6 q 193146 GRLA-1/4-QS-6-D
8 q 193147 GRLA-1/4-QS-8-D
10 q 193148 GRLA-1/4-QS-10-D

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 83

Compact cylinders ADN/AEN, to ISO 21287

Accessories
Ordering data – One-way flow control valves Data sheets a Internet: grlz
Connection Material Part no. Type
For @ For tubing O.D.
For supply air
12, 16, 20, 25 3 Metal design q 193153 GRLZ-M5-QS-3-D
4 q 193154 GRLZ-M5-QS-4-D
6 q 193155 GRLZ-M5-QS-6-D
32, 40, 50, 63, 80, 100 3 q 193156 GRLZ-1/8-QS-3-D
4 q 193157 GRLZ-1/8-QS-4-D
6 q 193158 GRLZ-1/8-QS-6-D
8 q 193159 GRLZ-1/8-QS-8-D
125 – 151195 GRLZ-1/4-B

Ordering data – One-way flow control valves for cylinders ADNH and ADNM Data sheets a Internet: grla
Connection Material Part no. Type
For @ For tubing O.D.
For exhaust air
25, 40 3 Metal design 193137 GRLA-M5-QS-3-D
4 193138 GRLA-M5-QS-4-D
63, 100 4 193143 GRLA-1/8-QS-4-D
6 193144 GRLA-1/8-QS-6-D
8 193145 GRLA-1/8-QS-8-D

Ordering data – Proximity sensors for T-slot, magneto-resistive Data sheets a Internet: smt
Type of mounting Switching Electrical connection Cable length Part no. Type
output [m]
N/O contact
Insertable in the slot from above, PNP Cable, 3-wire 2.5 q 574335 SMT-8M-A-PS-24V-E-2.5-OE
flush with the cylinder profile, Plug M8x1, 3-pin 0.3 q 574334 SMT-8M-A-PS-24V-E-0.3-M8D
short design Plug M12x1, 3-pin 0.3 q 574337 SMT-8M-A-PS-24V-E-0.3-M12
NPN Cable, 3-wire 2.5 q 574338 SMT-8M-A-NS-24V-E-2.5-OE
Plug M8x1, 3-pin 0.3 q 574339 SMT-8M-A-NS-24V-E-0.3-M8D

N/C contact
Insertable in the slot from above, PNP Cable, 3-wire 7.5 q 574340 SMT-8M-A-PO-24V-E-7.5-OE
flush with the cylinder profile,
short design

Ordering data – Proximity sensors for T-slot, magneto-resistive Data sheets a Internet: smt
Type of mounting Electrical connection, Switching Cable length Part no. Type
outlet direction of connection output [m]
N/O contact
Inserted in the slot lengthwise Cable, 3-wire, lateral PNP 2.5 547859 SMT-8G-PS-24V-E-2,5Q-OE
Plug M8x1, 3-pin, lateral 0.3 547860 SMT-8G-PS-24V-E-0,3Q-M8D
Cable, 3-wire, lateral NPN 2.5 8065028 SMT-8G-NS-24V-E-2,5Q-OE
Plug M8x1, 3-pin, lateral 0.3 8065027 SMT-8G-NS-24V-E-0,3Q-M8D

84 d Internet: www.festo.com/catalogue/... Subject to change – 2021/12

 Compact cylinders ADN/AEN, to ISO 21287

Accessories
Ordering data – Proximity sensors for T-slot, magnetic reed Data sheets a Internet: sme
Type of mounting Switching Electrical connection Cable length Part no. Type
output [m]
N/O contact
Inserted in the slot from above, flush with Contacting Cable, 3-wire 2.5 q 543862 SME-8M-DS-24V-K-2.5-OE
the cylinder profile 5.0 q 543863 SME-8M-DS-24V-K-5.0-OE
Cable, 2-wire 2.5 q 543872 SME-8M-ZS-24V-K-2.5-OE
Plug M8x1, 3-pin 0.3 q 543861 SME-8M-DS-24V-K-0.3-M8D
Inserted in the slot lengthwise, flush with Contacting Cable, 3-wire 2.5 150855 SME-8-K-LED-24
the cylinder profile Plug M8x1, 3-pin 0.3 150857 SME-8-S-LED-24

N/C contact
Inserted in the slot lengthwise, flush with Contacting Cable, 3-wire 7.5 160251 SME-8-O-K-LED-24
the cylinder profile

Ordering data – Connecting cables Data sheets a Internet: nebu

Electrical connection, left Electrical connection, right Cable length Part no. Type
[m]
Straight socket, M8x1, 3-pin Cable, open end, 3-wire 2.5 q 541333 NEBU-M8G3-K-2.5-LE3
5 q 541334 NEBU-M8G3-K-5-LE3
Straight socket, M12x1, 5-pin Cable, open end, 3-wire 2.5 q 541363 NEBU-M12G5-K-2.5-LE3
5 q 541364 NEBU-M12G5-K-5-LE3
Angled socket, M8x1, 3-pin Cable, open end, 3-wire 2.5 q 541338 NEBU-M8W3-K-2.5-LE3
5 q 541341 NEBU-M8W3-K-5-LE3
Angled socket, M12x1, 5-pin Cable, open end, 3-wire 2.5 541367 NEBU-M12W5-K-2.5-LE3
5 541370 NEBU-M12W5-K-5-LE3

Ordering data – Proximity sensor in block design, pneumatic Data sheets a Internet: smpo
Pneumatic connection Part no. Type
3/2-way valve, normally closed
Female thread M5 178563 SMPO-8E

Ordering data – Mounting kit for proximity sensors SMPO-8E Data sheets a Internet: smb
Mounting Part no. Type
Clamped in T-slot 178230 SMB-8E

Ordering data – Slot cover for T-slot

Mounting Length Part no. Type
Insertable 2x 0.5 m 151680 ABP-5-S

2021/12 – Subject to change d Internet: www.festo.com/catalogue/... 85