Scribd
Upload
9 views

Casing-Scraper Botta

The document discusses a casing scraper tool used to remove obstructions from the inside of oil well casings. The casing scraper has full circle blades that contact 600 degrees of casing surface at once and long tapers on the blades to pass through joints without hanging. It can be used for vertical or rotary operations on pipe ranging from 2-13 inches.

Uploaded by

rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

Casing-Scraper Botta

The document discusses a casing scraper tool used to remove obstructions from the inside of oil well casings. The casing scraper has full circle blades that contact 600 degrees of casing surface at once and long tapers on the blades to pass through joints without hanging. It can be used for vertical or rotary operations on pipe ranging from 2-13 inches.

Uploaded by

rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DOC TITLE: Casing Scrapers

DOC. No: TAS-FRE-CS-001

REV: 1 Page |1

Casing Scrapers

Casing Scrapers

The Downhole Casing Scraper is ideal for the removal of mud, cement,
bullets, rust, scale, paraffin, perforation burrs and other obstructions from
the inside walls of casing.

Maintaining a clean casing I.D. is important when operating drilling, fishing,


or wireline tools. Likewise, packers, patches, spears, and similar tools
require clean surfaces to grip. Obstructions on casing walls will frequently
cause these tools to fail or become difficult to operate.

Construction

Utilizing a simple one-piece mandrel design, the Casing Scraper is


constructed to be rugged, yet simple to operate and maintain. The Scraper
conditions 50 percent more surface area than any other tool on the market.
The full circle blades are so spaced to contact 600° (almost two complete
circles) of casing surface at once.

Short and compact, the Scraper also incorporates a long taper on the
blades for passing through joints without hanging. The Scraper works in
vertical or rotary operations and may be run on drill pipe or wireline.
Casing Scrapers are available to condition pipe ranging from 2”-inch tubing
to 13” inch casing.

Advantages

 More scraping surface approximately 50 percent more than any


other scraper on the market extends blade life.
 Full circle blades contact 600° surface at once.
 Short, compact, easy to assemble and disassemble.
 Longer guide taper on blades for passing through joints without
hanging.
 Vertical and rotary operation may be run on wireline or drill pipe.
 Investment cast tool steel blades allows maximum scraping ability.

ER-30/03/16

You might also like