Scribd
Upload
178 views

21-FTD Configuration Lab For FMC

This document describes a lab configuration with a Cisco Firepower Threat Defense device, Cisco Firepower Management Center, and other nodes. The lab uses specific IP addresses and subnets for inside, outside, and management networks. A diagram shows the lab topology.

Uploaded by

shahrukh khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
178 views

21-FTD Configuration Lab For FMC

This document describes a lab configuration with a Cisco Firepower Threat Defense device, Cisco Firepower Management Center, and other nodes. The lab uses specific IP addresses and subnets for inside, outside, and management networks. A diagram shows the lab topology.

Uploaded by

shahrukh khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

FTD Configuration Lab for FMC:

Lab has real Internet access via NAT Cloud and we going to use the host cloud1 for Management Access.
Nodes used in the Lab are
Linux Tiny Core (linux-tinycore-6.4)
Cisco Firepower FTD 6.3.0-83
Cisco Firepower FMC 6.3.0-83
Cisco IOU Switch
NAT (Management Cloud0)

Inside Subnet 192.168.1.0/24


Outside Subnet 192.168.114.0 /24
Management Subnet 10.1.1.0/24
Gateway for Inside 192.168.1.100
Gateway for Outside 192.168.114.2
Gateway for Management 10.1.1.20
FMC Management IP 10.1.1.10
FTD Management IP 10.1.1.1
Management PC IP 10.1.1.20

Lab Topology:

1 | P a g e Created by Ahmad Ali E-Mail: [email protected] , Mobile: 056 430 3717


2 | P a g e Created by Ahmad Ali E-Mail: [email protected] , Mobile: 056 430 3717
3 | P a g e Created by Ahmad Ali E-Mail: [email protected] , Mobile: 056 430 3717

You might also like