Bachelor of Engineering (IV –Semester)

Teaching Hrs / Week Examination Marks

Sl.
Credits
No. Course Code Course Title Department L T* P CIE SEE Total
1 P21MA401 Engineering Mathematics – IV MA 3 - - 3 50 50 100
2 P21ME402 Applied Thermodynamics (ATD) ME 3 - - 3 50 50 100
Professional Core Course
3 P21 ME/AU/IP 403 Mechanics of Materials (MOM) ME/AU/IP 3 - - 3 50 50 100
Professional Core Course
4 P21 ME/AU/IP 404 Manufacturing Process – II ME/AU/IP 3 - 2 4 50 50 100
Professional Core Course (Integrated)
5 P21 ME/AU/IP 405 Mechanical Measurements and Metrology (MMM) ME/AU/IP 3 - 2 4 50 50 100
Professional Core Course (Integrated)
6 P21 ME/AU/IP L406 Fluid Mechanics and Machinery Laboratory ME/AU/IP - - 2 1 50 50 100
Professional Core Course Laboratory
P21KSK407 Samskrutika Kannada /
HSMC 1 - - 1 50 50 100
P21KBK407 Balake Kannada
7
OR
P21CIP407 Constitution of India and Professional Ethics HSMC 1 - - 1 50 50 100
8 P21HSMC408 Employability Enhancement Skills - IV HSMC 1 - - 1 50 50 100
9. P21ME409 Internship – I ME - - - 1 - 100 100
Total 21
 Course Title: APPLIED THERMODYNAMICS(Professional core course)
Course Code: P21ME402 Semester: IV L-T-P: 3-0-0 Credits: 03
Contact Period - Lecture: 40 Hrs. Exam: 3Hrs. Weightage: CIE: 50 %; SEE: 50%
Course Objectives: Applied thermodynamics is a continuation course of Basic Thermodynamics with emphasis on
the analysis of gas power and refrigeration cycles and the application of basic principles to engineering problems with
systems involving compressors, refrigeration and I C engines
Course Content
UNIT-I
AIR STANDARD CYCLES: Otto Cycle and Diesel Cycle: P-V and T-S diagrams, description, efficiencies and
mean effective pressures. Comparison of Otto and Diesel cycles. Brayton cycle for gas turbine power plants.
Deviations of practical gas turbine cycles from ideal cycles. Variations of Brayton cycle like Inter-cooling, reheating
and Regeneration. Numerical Problems. 9 Hrs
Self study component: P-V and T-S diagrams, description, expression for efficiencies of Dual cycle, Sterling cycle,
Atkinson cycle, Lenoir cycle and Ericson cycle.
UNIT-II
VAPOUR POWER CYCLES: Carnot vapour power cycle and its performance. Simple Rankine cycle: description, T-
S diagram and expression for efficiency. Comparison of Carnot and Rankine cycles. Effects of operating parameters on
the performance of simple Rankine cycle. Deviation of simple Rankine cycle from ideal cycles. Reheat Cycle, Ideal
regenerative cycle, and practical regenerative cycles with open and closed type feed water heaters, Numerical Problems.
9 Hrs
Self study component: Ideal cycles for jet propulsion, maximum work and propulsion efficiency for a turbo jet cycle.
Turbo jet, Ram jet and turbo prop engines.
UNIT-III
RECIPROCATING AIR COMPRESSORS: Working of single stage reciprocating air compressors, Work input
using P-V diagram and steady flow analysis. Effect of clearance volume on volumetric efficiency, isothermal and
mechanical efficiencies. Multistage compression, advantages of multistage compression. Expression for optimum
intermediate pressure with perfect and imperfect intercooling. Numerical Problems.
7 Hrs
Self study component: Brief explanation of rotary compressors, fans and Blowers.
UNIT-IV
REFRIGERATION: Introduction, Units of refrigeration and COP, Refrigerants and Properties of good refrigerants,
refrigerating effect, capacity, power required to drive the compressor. Analysis of Mechanical vapor compression
refrigeration systems with T-s and P-h diagrams, effect of sub-cooling and super-heating. Principle of, numerical
problems Psychrometry: Psychrometric properties, relations, processes, chart, summer and winter air conditioning
systems, numerical problems
8 Hrs
Self study component: Vapor absorption refrigeration system and steam jet refrigeration
UNIT-V
TESTING OF I.C. ENGINES: Testing of SI and CI engines. Performance Factors, Basic testing factors and basic
measurements for engine performance. Indicated Power, Friction Power: Willian’s line method, Morse Test, and
Motoring test. Brake Power: principle of mechanical, hydraulic and eddy current dynamometers. Fuel consumption:
volumetric type. Air consumption: Air Box Method to determine air consumption. Heat balance sheet and related
numerical problems.
7 Hrs
Self-study component: Combustion in I C engines, delay period and factors affecting delay period. Diesel knock and
methods of controlling diesel knock.

Text Books
1. P .K. Nag “Basic and Applied Thermodynamics” Tata McGraw Hill, 2nd Edition 2009, ISBN:
9780070151314.
2. R K Rajput “Engineering Thermodynamics” Laxmi Publications, 4th Edition, ISBN: 9788131800584.
3. Gordon J. Van Wylen “Fundamentals of Classical Thermodynamics” John Wiley & Sons Canada,
Limited, 3rd edition, 1988,ISBN : 9780471610762
Reference Books
 1. 1. D B Spalding and E H Cole “Engineering Thermodynamics” Arnold 1973, 3 edition, ISBN :
9780713132991.
2. Yunus A. Çengel Michael A. Boles “Thermodynamics – An engineering approach” Tata McGraw
Hill, 6th edition, 2007, ISBN : 9780073305370.
3. S Domkundwar, C P Kothandaraman and V Domkundwar “A course in Thermal Engineering”,Dhanpat
Rai & Co, 2004, ISBN: 9788177000214.
4. M.L.Mathur and R.P.Sharma “Internal Combustion Engines”, Dhanpat Rai & Co, 2010, ISBN:
9788189928469.
5. Mahesh M Rathore “Thermal Engineering” Tata McGraw Hill, 1st edition, ISBN: 9780070681132 V
Ganesan “Internal Combustion Engines” Tata McGraw Hill, 4th edition, 2012, ISBN : 9781259006197.
Course Outcomes
After learning all the units of the course, the student is able to;
1. Interpret the basic concepts of thermodynamics and able to apply for the different thermodynamic
cycles.
2. Compare the various power producing and power absorbing mechanical systems by its working
principles and by describing the thermodynamic cycles.
3. Make use of mathematical expressions to analyse the performance of different thermal systems.
4. Analyse the performance of I C Engines using various tests.
5. Analyse refrigeration and air-conditioning processes using the principles of thermodynamics and psychrometry
Course Articulation Matrix
Course Outcomes Program Outcomes PSO
1 2 3 4 5 6 7 8 9 10 11 12 01 02
CO1 Interpret the basic concepts of
thermodynamics and able to apply for the 2 1 2
different thermodynamic cycles.
CO2 Compare the various power producing
and power absorbing mechanical systems
2 1 2
by its working principles and by
describing the thermodynamic cycles..
CO3 Make use of mathematical expressions to
analyse the performance of different thermal 2 2 2
systems.
CO4 Analyse the performance of I C Engines 2 2 2
using various tests.
CO5 Analyse the performance of I C Engines 2 2 2
using various tests.
 Course Title: MECHANICS OF MATERIALS (Professional core course)
Course Code: P21 ME/AU/IP 403 Semester: IV L-T-P: 3-0-0 Credits: 03
Contact Period - Lecture: 40 Hrs. Exam: 3Hrs. Weightage: CIE:50%; SEE:50%
Course Objectives: The course aims at enabling the students to;
1. Understand the basic concepts of stress, strain and deformation of mechanical elements subjected to
axial, bending and torsional loading.
2. Analyze shear force, bending moment in beams and crippling load in columns.
Course Content
UNIT-I
Simple stresses and strains: Stress, types, Saint Venant’s principle, stress-strain curve for mild steel,
working stress, proof stress, factor of safety, Hooke’s law, modulus of elasticity, strain energy, proof
resilience, longitudinal strain, lateral strain, poison’s ratio, stress strain analysis of bars of uniform cross
section, stepped bars, circular bar with continuously varying section, principle of superposition. Modulus of
rigidity, bulk modulus, relation among elastic constants.
6Hrs
Self study component: Rectangular bar with continuously varying section, volumetric strain.
UNIT-II
Compound bars: Stress analysis of composite bars. Thermal stresses in uniform and compound bars.
Compound stresses: Principal planes and stresses, plane of maximum shear stress in general 2D system.
Mohr’s circle diagram (2D).
8Hrs
Self study component: Strain on inclined plane due to normal stress in x and y directions.
UNIT-III
Shear force and Bending Moment Diagrams (SFD and BMD): Types of beams, loads and supports, shear
force and bending moment, sign conventions, point of contraflexure, and relationship between load
intensity, shear force and bending moment. SFD and BMD for different beams subjected to concentrated
loads, uniformly distributed load, uniformly varying load and inclined loads.
8 Hrs
Self study component: Applications of beams.
UNIT-IV
Bending and shear stresses in Beams: Theory of simple bending, assumptions in simple bending,
relationship between bending stresses and radius of curvature, relationship between bending moment and
radius of curvature, section modulus. Bending stresses in beams of uniform section. Shearing stresses in
beams, shear stress across rectangular, I and T sections. (Moment of Inertia to be provided for numerical
problems). Deflection of Beams: Introduction, Differential equation of deflection; Flexural rigidity,
Macaulay’s method for simply supported beams with point load and UDL.
10 Hrs
Self study component: Beam of uniform strength-uniform beam of rectangular section replaced by beam of
constant depth and width.
UNIT-V
Torsional stresses: Introduction to torsion, pure torsion, assumptions, derivation of torsional equation, polar
modulus, torsional rigidity and torque transmitted by solid and hollow circular shafts. Columns:
Introduction to Columns, Euler theory for axially loaded elastic long columns, Euler equation for columns
with (i) both ends hinged (ii) both ends fixed, Limitations of Euler’s theory, Rankine’s formula.
8 Hrs
Self study component: Euler equation for i) one end fixed and other end is free ii) one end fixed and the
other end is hinged.
Text Books
1.S. S. Bhavikatti, “Strength of Materials”, Vikas Publication House-Pvt Ltd, 2nd edition, 2000, ISBN:
8125901647.
2.S.S. Rattan, “Strength of Materials”, Tata McGraw-Hill, New Delhi, 2nd Edition, 2011, ISBN:
9780071072564.
Reference Books
1.James M. Gere, Stephen P. Timoshenko, “Mechanics of Materials” CBS Publishers and Distributers
Delhi. ISBN: 13: 978-9390219421.
2.W.A. Nash “Strength of Materials “Schaum’s Outline Series, 4th Edition, 2007, ISBN: 9780070466173.
3. Dr. R. K. Bansal “Strength of Materials” Laxmi Publication, New Delhi, 5th Edition, 2007,
ISBN: 9788131808146.
4.Ferdinand P Beer, E Russell Johnston, JR., John T DeWolf adapted by N Shivaprasad & S Krishnamurthy
“Mechanics of Materials” Tata McGraw-Hill.
5. Dr. B.C. Punmia, Ashok Kumar Jain and Arun Kumar Jain, “Mechanics of Materials” Laxmi
Publications, New Delhi. 2002.
Course Outcomes
The student will be able to;
1. Apply the concepts of normal stresses, strain, shear stress, bending stress and torsional stress in analyzing
mechanical components.
2. Apply the fundamentals of torsional load, thermal load to Analyze stresses in shafts and bars of uniform and
compound sections. .
3. Apply the concepts of shear force, bending moment to analyze beams for different cross section.
4. Apply the basic principles of Euler’s and Rankine’s equations in columns and Macaulay’s method in
beams to analyze the effect of external load on different end conditions and cross section.
Course Articulation Matrix
Course Outcomes Program Outcomes PSO
1 2 3 4 5 6 7 8 9 10 11 12 01 02
Apply the concepts of normal stresses,
strain, shear stress, bending stress and
CO1 torsional stress in analyzing mechanical 3 2
components.
Apply the fundamentals of thermal load and
compound stress (Mohr’s Circle method) to
CO2 analyse the bars of uniform and compound 3 3
section.
Apply the concepts of shear force, bending
CO3 moment to analyze beams for different cross 2 3
section.
Apply the basic principles of Euler’s and
Rankine’s equations in columns and
CO4 Macaulay’s method in beams to analyze 3 2
the effect of external load on different
end conditions and cross section.
Web links:
1.https://www.youtube.com/watch?v=GkFgysZC4Vc&list=PL27C4A6AEA552F9E6&ab_channel=nptelhrd
2. https://www.youtube.com/watch?v=vC8h1RF-KYs&ab_channel=IITDelhiJuly2018
3.https://www.youtube.com/watch?v=tao5K9Kihrs&ab_channel=IITDelhiJuly2018
4. https://www.youtube.com/watch?v=pN8zj44_DoY&ab_channel=Mechanicsofsolids
5.https://www.youtube.com/watch?v=1txkFwWWYds&t=759s&ab_channel=StructuralAnalysis-I
6.https://www.youtube.com/watch?v=CnONQoxubLw&ab_channel=nptelhrd
7. https://www.youtube.com/watch?v=wJWt0dcgafs&ab_channel=nptelhrd

Assessment pattern for Regular/Normal courses

COMPONENT THEORY TOTAL
Type of Assessment Test* AAT# MARKS
Test
Max. CIE Marks 40 10 50
*
Note: Two tests will be conducted; an average of two tests will be considered for the final assessment,
#
Two AAT will be conducted and an average of both will be considered for the final assessment.
 Course Title: MANUFACTURING PROCESS - II (Integrated)
Course Code: P21 ME/AU/IP 404 Semester: IV L-T-P: 3-0-2 Credits: 04
Contact Period - Lecture: 50 Hrs. Exam: 3Hrs. Weightage: CIE: 50 %; SEE: 50%
Course Objectives: This course enables the student to understand basic metal forming processes of forging,
rolling, extrusion, drawing, sheet metal forming and powder metallurgy.
Course Content
UNIT-I
Introduction to Metal Working: Classification of metal working processes, characteristics of wrought
products, advantages and limitations of metal working processes. Effect of parameters in metal forming
process-Temperature, strain rate, friction and lubrication, hydrostatic pressure in metalworking, Deformation
zone geometry, workability of materials, residual stresses in wrought products. 10 Hrs
Self study component: Concepts of biaxial & triaxial stresses, plane stress & plane strain.

UNIT-II
FORGING and ROLLING: Classification of forging processes, forging machines and equipments,
Forging die-design parameters. Material flow lines in forging. Forging defects, Residual stresses in forging,
advantages and disadvantages of forging. Classification of Rolling processes. Rolling mills, Defects in rolled
products, Rolling variables roll camber. 10 Hrs
Self study component: Hand forging equipments and operations.
UNIT-III
EXTRUSION & DRAWING: Types of Extrusion, Extrusion variables, Extrusion dies. Seamless tube
extrusion, Lubrication in Extrusion, Deformation of metal flow in extrusion, Defects in extruded products.
Drawing equipment, Elements of drawing Die, dead zone formation, drawing variables, Tube drawing-
classification of tube drawing 10 Hrs
Self study component: Extrusion of brittle metals.
UNIT-IV
SHEET METAL FORMING: Sheet metal forming methods, Dies & Punches-classification of dies. Open
back inclinable press, Limiting drawing ratio in drawing, Forming limit criterion, Defects in deep drawn
products. High energy rate forming (HERF) - Explosive forming, electromagnetic forming, electro hydraulic forming.
10 Hrs
Self study component: Parameters affecting drawability.
UNIT-V
POWDER METALLURGY: Basic steps in powder metallurgy, methods of powder production,
Characteristics of metal powder. Conditioning and blending powders, Compacting metal powders, Sintering-
sintering mechanism, Isostatic pressing, types of isostatic pressing, finishing operations of powder
metallurgy parts, advantages, disadvantages and applications of powder metallurgy.
10 Hrs
Self study component: Safety and environmental aspects of powder metallurgy.
Practical

1. Use of forging tools and equipments.

2. Preparing 1st model involving upsetting, drawing and bending operations, along with length and
volume calculations.
3. Preparing 2nd model involving upsetting, drawing and bending operations, along with length and
volume calculations.
4. Preparing 3rd model involving upsetting, drawing and bending operations, along with length and
volume calculations.
5. Use of sheet metal tools and equipments.
6. Preparing sheet metal model of square prism.
7. Preparing sheet metal model of cylinder.
8. Preparing sheet metal models of frustum of cone.
9. Demonstration on extrusion honing process.
10. Demonstration of forming the parts from metallic powders.
Text Books
4. George E. Dieter, “Mechanical Metallurgy,” Tata Mc Graw Hill Education, 3rd Edition, 2013, ISBN:
9781259064791.1
5. Serope Kalpakjian & Stevan R. Schmid, “Manufacturing Engineering and Technology,”Pearson
Education; 4th Edition, 2014, ISBN: 978-9332535800
Reference Books
1. J.T. Black, Ronald A. Kohser, “Materials and Processes in manufacturing,” Wiley, 11th Edition, 2011,
ISBN: 978-0470924679.
2. G. W. Rowe, “Principles of Industrial metal working process,” CBS Publisher, 1st Edition, 2005,
ISBN: 978-8123904283
3. Amitabha Ghosh and Asok Kumar Mallik, “Manufacturing Science,” East-West press Pvt. Ltd., 2010,
ISBN: 978-8176710633
4. Sadhu Singh, Theory of Plasticity & Metal Forming Processes”, Khanna Publishers,
2003, ISBN: 978-8174090508
 Course Title: MECHANICAL MEASUREMENTS & METROLOGY (Integrated)
Course Code: P 21ME/AU/IP 405 Semester: IV L-T-P: 3-0-2 Credits: 04
Contact Period - Lecture: 50 Hrs. Exam: 3Hrs. Weightage: CIE: 50 %; SEE: 50%
Course Objectives: The course aims at enabling the students to understand the basic concepts of
Measurement & Metrology, and strengthening their knowledge about advancements in system of Limits,
Fits, Tolerances and Gauging of mechanical elements. Also the course aims at making students familiar with
different measurement equipment’s and use of this in industry for quality inspection.
Course Content
UNIT-I
Basic Concepts of Measurement and Metrology: Definition and significance of measurement,
Generalized measurement system, Performance characteristics of measuring instruments (Only static
characteristics), Inaccuracy of Measurements, Definition and objectives of metrology. Standards, Line and
end standard, Wave length standard, Transfer from line to end standard. Slip gauges, Wringing phenomena,
Numerical problems on building of slip gauges and calibration of end bars.
10 Hrs
Self study component: Imperial standard yard & International Prototype meter
Practical: Measurements of angle using Sine bar and Sine Center
UNIT-II
System of Limits, Fits, Tolerances and Gauging: Definition of tolerance, specification in assembly,
Principle of interchangeability and selective assembly. Concept of limits of size and tolerances, Compound
tolerances, accumulation of tolerances. Definition of fits, types of fits. Hole basis system and shaft basis
system, Geometric dimensioning and tolerancing.
Classification of gauges, Basic concept of design of gauges (Taylor's principles), wear allowance on
gauges. Types of gauges -plain plug gauge, ring gauge, snap gauge, gauge materials. Gauge Design and
numerical problems. 10 Hrs
Self study component: Limit gauges for tapers.
Practical: Measurements using Profile Projector / Toolmaker’s Microscope
UNIT-III
Comparators: Characteristics and classification of comparators. Mechanical comparators- Johnson
Mikrokator, Sigma Comparators, Optical Comparators -principles, Zeiss ultra optimeter, Electric and
Electronic Comparators, LVDT, Pneumatic Comparators, Solex Comparator. Back Pressure gauges,
Surface roughness and Metrology of Screw Thread: Surface roughness terminology, Methods of
measuring surface roughness, Taylor-Hobson Talysurf, Analysis of surface traces, Measurement of basic
elements of thread, worked examples.
10 Hrs
Self study component: Measurements of alignment using Autocollimator
Practical: Measurements of Screw thread Parameters using floating carriage.
UNIT-IV
Transducers: Introduction, Transfer efficiency, classification of transducers. Mechanical Transducers:
diaphragms, bellows. Electrical transducers: sliding contact resistive type, capacitive transducer, Piezo-
Electric transducer.
Signal Conditioning: Inherent problems in Mechanical systems, Electrical intermediate modifying
devices, Input circuitry-simple current sensitive circuit, Electronic amplifiers, Filters, Types of filters,
telemetry.
10 Hrs
Self study component: Applications of Transducers.
Practical: Measurements of Surface roughness using Tally surf
UNIT-V
Strain Measurement: Methods of strain measurement, Strain gauges, Preparation and mounting of strain
gauges.
 Measurement of Force: Introduction, Proving ring
Measurement of Torque: Introduction, Hydraulic dynamometer.
Measurement of Pressure: Introduction, Mc Leod gauge, Pirani Gauge
Temperature Measurement: Thermocouple, Laws of thermocouple, Thermocouple materials. 10 Hrs
Self study component: Pyrometers, Optical pyrometers.
Practical: Measurements of cutting tool forces using Drill tool Dynamometer

Text Books
1.R.K.Jain “Engineering Metrology” Khanna Publishers, Delhi, 20th edition, 2004, ISBN:
9788174091536.
2.Thomas G. Beckwith, Roy D. Marangoni & John H. Lienhard
“Mechanical Measurements” Pearson Prentice Hall, 6th edition, 2007, ISBN : 9780201847659
Reference Books
1.I.C.Gupta “Engineering Metrology” Dhanpat Rai Publications, 7th edition, 2012, ISBN:
9788189928452.
2.Alsutko & Jerry Faulk “Industrial Instrumentation” Delmar cengage learning, 1996, ISBN:
9780827361256.
3.R.S.Sirohi and H.C.RadhaKrishna “Mechanical Measurements” New Age International, Revised 3rd
edition, 2013, ISBN: 9788122403831.
4.Doblin “Measurement Systems” Tata McGraw Hill, 6th edition, 2012, ISBN: 9780070699687.
Course Outcomes
After learning all the units of the course, the student is able to;
1. Describe fundamentals of metrology and measurement
2. Design tolerances and fits for selected product quality
3. Choose appropriate method and instruments for inspection of various elements
4. Analysis of complex design systems related to mechanical Engineering.
5. Making use of appropriate laboratory tools and design innovative methods
Course Articulation Matrix
Course Outcomes Program Outcomes PSO
1 2 3 4 5 6 7 8 9 10 11 12 01 02
CO1 Describe fundamentals of metrology
-
and measurement 2 1
CO2 Design tolerances and fits for selected
product quality 2 1 1 2 1 -
CO3 Choose appropriate method and
instruments for inspection of various 1
elements 1 2 1 -
CO4 Analysis of complex design systems related
to mechanical Engineering. 1
1 1 2 -
CO5 Making use of appropriate laboratory tools
and design innovative methods 2 1 1
1 2 3 -
 Course Title: FLUID MEASUREMENT AND MACHINERY LABORATORY (Core Laboratory)
Course Code: P 21ME/AU/IP L406 Semester: IV L-T-P: 0-0-2 Credits: 1
Contact Period - Lecture: 15Hrs. Exam: 3Hrs. Weightage: CIE: 50 %; SEE: 50%
Course Objectives: The course aims at enabling
1. The students to analyze the basic measurement techniques of fluid flow.
2. The students to evaluate the performance of turbine, Pumps, compressor and blower.
Course Content
PART-A
Exp-1
Calibration of venturi meter and determination of its co-efficient of discharge
3Hrs
Exp-2
Calibration of orifice meter and determination of its co-efficient of discharge
3Hrs
Exp-3
Calibration of V-Notch for flow through a channel.
3Hrs
Exp-4
Determination of coefficient of friction in flow through pipes.
3Hrs
Exp-5
Determination of vane efficiency (Coefficient of impact) for different vanes.
3Hrs
PART-B
Exp-6
Performance test on Pelton wheel Turbine.
3Hrs
Exp-7
Performance test on Centrifugal Pump.
3Hrs
Exp-8
Performance test on Reciprocating Pump.
3Hrs
Exp-9
Performance test on Two Stage Reciprocating Air Compressor.
3Hrs
Exp-10
Performance test on an Air Blower.
3Hrs
Reference Books
1. Dr. Jagadish Lal “Fluid Mechanics and Hydraulics” Metropolitan Book Co. Pvt. Ltd, New Delhi, 2002, ISBN:
9788120002722
2. Dr. R.K.Bansal, “Fluid mechanics and hydraulic machines” Laxmi publications Ltd., New Delhi. 9th edition,
2015, ISBN: 9788131808153.

Course Outcomes
1. Apply Bernoulli’s principle to determine fluid flow rate through a closed pipe.
2. Examine the fluid flow rate in a open channel.
3. Compare the effect of friction in pipes made of different materials.
4. Analyse the performance parameters of turbine, pumps, compressor and blower.
 Course Articulation Matrix
Program Outcomes PSO
Course Outcomes
1 2 3 4 5 6 7 8 9 10 11 12 01 02
Apply Bernoulli’s principle to determine fluid flow
CO1 rate through a closed pipe and examine the fluid 3 1 1
flow rate in a open channel.
Compare the effect of friction in pipes made of
CO2 3 1 1
different materials.
Analyse the performance parameters of turbine,
CO3 3 2 2
pumps, compressor and blower.
Make use of experimental data for writing an
effective report as an individual or as a team member 3 3 3
CO4
to communicate effectively.