Scribd
Upload
20 views7 pages

NET201 Network Theory Set-B AS2018

Uploaded by

Sofel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views7 pages

NET201 Network Theory Set-B AS2018

Uploaded by

Sofel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Student No.

ROYAL UNIVERSITY OF BHUTAN


COLLEGE OF SCIENCE AND TECHNOLOGY
PHUENTSHOLING: BHUTAN

AUTUMN SEMESTER EXAMINATION: 2018

Class : BE (ECE) Second Year

Module : Network Theory

Module Code : NET201

Semester : III

Max. Marks : 70

Max. Time : 3 Hrs

General Instructions:
1. Answer all the questions.
2. Present neat circuit diagrams, equations and waveforms to
support your explanation wherever necessary.

Page 1 of 7
Question No.1 [10x2=20]
1.1 Determine the phase sequence of the set of voltages;
Van  200 cos(t  10 0 )
Vbn  200 cos(t  2300 )
Vcn  200 cos(t  1100 )
1.2 Write down the relationship of phase and line voltages/currents
for the balanced star-delta three-phase system.
1.3 Draw the s-domain equivalent circuits of inductor and the
capacitor excited by current source.
1.4 For circuit in figure (01) with initial capacitive voltage 𝑉𝑐 (0) =
0 𝑉. Determine the output response 𝑣(𝑡) when input is (a) unit-
impulse and (b) unit-step function.

i(t ) 1 1F v(t )

Figure(01)

1.5 Define coefficient of coupling? Interpret when k ≤ 0.5 and k = 1?


1.6 Write the loop equations and draw the equivalent circuit for the
circuit in figure (02).

Figure (02)

Page 2 of 7
1.7 Draw the two-port equivalent circuit of y-parameters.
1.8 State the condition of reciprocity and the symmetry for network
function
1.9 Why a high-pass RC circuit is called differentiator? Mention its
applications.
1.10 The low pass RC filter with R= 3kΩ and C=0.03µF. Determine the
cut-off frequency and phase shift.

Question No.2 [2, 3, 3, 3]


2.1 Three 12 Ω resistors are connected in star to 415V, 3-phase supply.
Determine the total power dissipated by the resistors.
2.2 Three coils each having impedance of 3 + 𝑗4 Ω are connected (i)
in star and (ii) in delta to a line voltage of 415V, 3-phase supply.
Calculate for each connection (a) the line and phase voltages and
(b) the phase and line currents.
2.3 Two wattmeters indicate 10kW and 3kW respectively when
connected to a 3-phase motor, the reverse switch being operated on
the meter indicating 3 kW reading. Determine (i) the total input
power and (ii) load power factor.
2.4 Describe the relationship between voltage, current and power in 3-
phase star-connected system. Also draw the phasor diagrams.

Question No.3 [3, 2, 2, 4]


3.1 Find the equivalent (a) T-network and (b) π-network of the linear
transformer shown in figure (04)

Figure (04)
Page 3 of 7
3.2 For the question 3.1 in figure (04), if 𝐼1 = 20 cos(500𝑡 − 20°) A
and 𝐼2 = 5cos(500𝑡 − 20°) A , calculate total energy stored in the
system when the time t=0.
3.3 State the Dot Convention rule of mutually coupled circuits.
3.4 Find the loop currents in the magnetically coupled circuit shown in
figure (05)?
j 2

j5 j10
3 5
1000V
 j 2

Figure(05)

Question No.4 [4, 4]


4.1 For the circuit in figure (06), the switch S has been in position 1 for
a long time; it is moved to position 2 at t=0. Obtain the current i(t)
for t > 0.
1
t 0
2
20

60V 100 V

20H

Figure(06)

4.2 In the circuit in figure (07), S1 is closed at t=0, and S2 is opened at


t=4 milliseconds. Determine 𝑖(𝑡) for t > 0. Assume an inductor is
initially de-energised.

Page 4 of 7
S1 50

t 0
50 t  4msec
S2
10V

0.1H

Figure(07)

Question No.5 [4, 2, 3, 3]


5.1 Determine the Y and h parameters for the circuit shown in figure
(08).

Figure (08)
5.2 Show the series-series connection of two 2-port networks. Which
parameters does it yield?
5.3 Find the transmission parameters for the circuit in figure (09)

Figure (09)
Page 5 of 7
5.4 Determine the drive point impedance function for the circuit in
figure (10) below and plot poles and zeros in the s-plane.

1H 1F

3
2 1

Figure (10)

Question No.6 [4, 4]


6.1 Sketch the output waveforms of differentiating circuit for the
condition RC=T, when the input is
(i) sine wave
(ii) a square wave and
(iii) a triangular wave.
6.2 Sketch the output waveform from the integrating circuit when the
input is square wave for RC >> tp, RC = tp, and RC << tp. if tp is
time period of input.

Page 6 of 7
Page 7 of 7

You might also like