Scribd
Upload
8 views

Lecture 5

The document discusses gear ratios and how to calculate the speed of driven components using ratios of the number of teeth and diameters of driving and driven gears or sprockets. It provides formulas for calculating speeds between shafts, pulleys, and gears and includes a table to work through an example problem calculating speeds through multiple gear reductions.

Uploaded by

Heleana Faye Bundoc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
8 views

Lecture 5

The document discusses gear ratios and how to calculate the speed of driven components using ratios of the number of teeth and diameters of driving and driven gears or sprockets. It provides formulas for calculating speeds between shafts, pulleys, and gears and includes a table to work through an example problem calculating speeds through multiple gear reductions.

Uploaded by

Heleana Faye Bundoc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 34

𝑁1 = 𝑁2

Where 𝑁1 = 𝑎𝑛𝑔𝑢𝑙𝑎𝑟 𝑠𝑝𝑒𝑒𝑑 of the driver shaft (rpm)


𝑁2 = 𝑎𝑛𝑔𝑢𝑙𝑎𝑟 𝑠𝑝𝑒𝑒𝑑 of the driven shaft (rpm)
𝑁1 𝐷1 = 𝑁2 𝐷2
Where 𝑁1 = 𝑎𝑛𝑔𝑢𝑙𝑎𝑟 𝑠𝑝𝑒𝑒𝑑 of the driver pulley (rpm)
𝑁2 = 𝑎𝑛𝑔𝑢𝑙𝑎𝑟 𝑠𝑝𝑒𝑒𝑑 of the driven pulley (rpm)
𝐷1 = 𝑑𝑖𝑎𝑚𝑒𝑡𝑒𝑟 of the driver pulley
𝐷2 = 𝑑𝑖𝑎𝑚𝑒𝑡𝑒𝑟 of the driven pulley
𝑁1 𝑇1 = 𝑁2 𝑇2
Where 𝑁1 = 𝑎𝑛𝑔𝑢𝑙𝑎𝑟 𝑠𝑝𝑒𝑒𝑑 of the driver sprocket (rpm)
𝑁2 = 𝑎𝑛𝑔𝑢𝑙𝑎𝑟 𝑠𝑝𝑒𝑒𝑑 of the driven sprocket (rpm)
𝑇1 = 𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑡𝑒𝑒𝑡ℎ of the driver sprocket
𝑇2 = 𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑡𝑒𝑒𝑡ℎ of the driven sprocket
𝑁1 𝑇1 = 𝑁2 𝑇2
Where 𝑁1 = 𝑎𝑛𝑔𝑢𝑙𝑎𝑟 𝑠𝑝𝑒𝑒𝑑 of the driver gear (rpm)
𝑁2 = 𝑎𝑛𝑔𝑢𝑙𝑎𝑟 𝑠𝑝𝑒𝑒𝑑 of the driven gear (rpm)
𝑇1 = 𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑡𝑒𝑒𝑡ℎ of the driver gear
𝑇2 = 𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑡𝑒𝑒𝑡ℎ of the driven gear
First Reduction Second Reduction Third Reduction Traction Wheels

N1 = 3,000 rpm N3 = N5 = N7 =

N2 = N4 = 250 rpm N6 = 75 rpm D7 = 50 cm

D1 = 10 cm T3 = T5 = 33 teeth Speed =

D2 = 30 cm T4 = 100 teeth T6 =
First Reduction Second Reduction Third Reduction Traction Wheels

N1 = 3,000 rpm N3 = N5 = N7 =

N2 = N4 = N6 = D7 = 50 cm

D1 = 10 cm T3 = 25 teeth T5 = 33 teeth Speed = 3kph

D2 = T4 = 100 teeth T6 = 110 teeth

Please write the complete solution and the table with the answers on a clean sheet of paper
and submit it before 1PM today (Not following instruction will mean a grade of zero)

You might also like