山东福洋生物科技股份有限公司

SHANDONG FUYANG BIOTECHNOLOGY CO.,LTD

Material Safety Data Sheet
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

Product Name：Modified starch

Product Use: Drilling Mud Additive
Synonyms: Water loss control agent
Product Cas No.: Proprietary

Company Identification
SHANDONG FUYANG BIOTECHNOLOGY CO.,LTD
Address:pingyuan development zone, china
Tel:86-534-2169116

SECTION 2 COMPOSITION/ INFORMATION ON INGREDIENTS

COMPONENT CAS NUMBER AMOUNT EINECS SYM R-PHRASES

Proprietary Proprietary 100 % weight EXEMPT NA NA

Occupational Exposure Limits:

Component Limit TWA STEL Ceiling / Peak Notation
Proprietary DOCC Not Established NA NA NA

SECTION 3 HAZARDS IDENTIFICATION

*************************************************************************************************************
EMERGENCY OVERVIEW
Free flowing powder.
- DUST MAY PRODUCE MECHANICAL IRRITATION TO THE MUCOUS MEMBRANES OF THE EYES, NOSE,
THROAT AND UPPER RESPIRATORY TRACT
**************************************************************************************************************
IMMEDIATE HEALTH EFFECTS:
Eye: Not expected to cause prolonged or significant eye irritation. Material is dusty and may scratch the surface of the
eye.
Skin: Not expected to be harmful to internal organs if absorbed through the skin. Contact with the skin is not expected
to cause prolonged or significant irritation.
Ingestion: Not expected to be harmful if swallowed.
Inhalation: The dust from this material may cause respiratory irritation.

SECTION 4 FIRST AID MEASURES

Eye: Flush eyes with running water immediately while holding the eyelids open. Remove contact lenses, if worn, after
initial flushing, and continue flushing for at least 15 minutes. Get medical attention if irritation persists.
Skin: To remove the material from skin, use soap and water. Discard contaminated clothing and shoes or thoroughly
clean before reuse. Get medical attention if any symptoms develop.
 山东福洋生物科技股份有限公司
SHANDONG FUYANG BIOTECHNOLOGY CO.,LTD
Ingestion: If swallowed, do not induce vomiting. Give the person a glass of water or milk to drink and get immediate
medical attention. Never give anything by mouth to an unconscious person.
Inhalation: Move the exposed person to fresh air. If not breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical attention if breathing difficulties continue.

SECTION 5 FIRE FIGHTING MEASURES

FIRE CLASSIFICATION:
Classification: Not flammable or combustible. This material will burn although it is not easily ignited.
NFPA RATINGS: Health: 0 Flammability: 0 Reactivity: 0
FLAMMABLE PROPERTIES:
Flashpoint: NA
Autoignition: NA
Flammability (Explosive) Limits (% by volume in air): Lower: NA Upper: NA

EXTINGUISHING MEDIA: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.

PROTECTION OF FIRE FIGHTERS:

Fire Fighting Instructions: Material will not burn unless preheated. Clear fire area of all non-emergency personnel.
Only enter confined fire space with full gear, including a positive pressure, NIOSH-approved, self-contained breathing
apparatus. Cool surrounding equipment, fire-exposed containers and structures with water. Container areas exposed
to direct flame contact should be cooled with large quantities of water (500 gallons water per minute flame
impingement exposure) to prevent weakening of container structure.
Combustion Products: No data available.

SECTION 6 ACCIDENTAL RELEASE MEASURES

Protective Measures: Wear appropriate personal protective equipment when cleaning up spills. Refer to Section 8.
Spill Management: Avoid creating dust clouds. Shovel, sweep up or use industrial vacuum cleaner to pick up. Place
in container for proper disposal. Reduce airborne dust and prevent scattering by moistening with water.

SECTION 7 HANDLING AND STORAGE

READ AND OBSERVE ALL PRECAUTIONS ON PRODUCT LABEL. REFER TO PRODUCT LABEL OR MANUFACTURERS
TECHNICAL BULLETINS FOR THE PROPER USE AND HANDLING OF THIS MATERIAL.

Precautionary Measures: Use caution to avoid creation of dusts and to prevent inhalation of product dust (fines).
Avoid contact with product dust. Airborne dust concentrations above 20 mg/l may create a dust explosion hazard.
Avoid breathing vapors or fumes which may be released during thermal processing. Do not breathe dust at levels
above the recommended exposure limits. Avoid breathing material. Keep container closed. Use only with adequate
ventilation. Avoid contact with eyes, skin and clothing. Discard contaminated clothing and shoes or thoroughly clean
before reuse.
Static Hazard: Electrostatic charge may accumulate and create a hazardous condition when handling this material.
To minimize this hazard, bonding and grounding may be necessary but may not, by themselves, be sufficient. Review
all operations, which have the potential of generating an accumulation of electrostatic charge and/or a flammable
atmosphere (including tank and container filling, splash filling, tank cleaning, sampling, gauging, switch loading,
filtering, mixing, agitation, and vacuum truck operations) and use appropriate mitigating procedures.
General Storage Information: Treat as a solid that can burn. Store away from oxidizing materials, in a cool, dry place
with adequate ventilation. Bond and ground transfer equipment. DO NOT USE OR STORE near heat, sparks or open
flames. USE AND STORE ONLY IN WELL VENTILATED AREA. Keep container closed when not in use.
Container Warnings: Containers, even those that have been emptied, can contain residues of dusts or solid
particulates which may create both health and fire/explosion hazards.
 山东福洋生物科技股份有限公司
SHANDONG FUYANG BIOTECHNOLOGY CO.,LTD
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION

GENERAL CONSIDERATIONS:
Consider the potential hazards of this material (see Section 3) applicable exposure limits, job activities, and other
substances in the work place when designing engineering controls and selecting personal protective equipment. If
engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the
personal protective equipment listed below is recommended. The user should read and understand all instructions
and limitations supplied with the equipment since protection is usually provided for a limited time or under certain
circumstances.

ENGINEERING CONTROLS:
If heated material generates vapor or fumes, use process enclosures, local exhaust ventilation, or other engineering
controls to control exposure.

PERSONAL PROTECTIVE EQUIPMENT:

Eye/Face Protection: Wear eye protection such as safety glasses, chemical goggles, or face shields if engineering
controls or work practices are not adequate to prevent eye contact.
Skin Protection: Wear impervious protective clothing to prevent skin contact. Selection of protective clothing may
include gloves, apron, boots, and complete facial protection depending on operations conducted. Users should
determine acceptable performance characteristics of protective clothing. Consider physical requirements and other
substances present when selecting protective clothing. Suggested materials for protective gloves include: Nitrile
Rubber
Respiratory Protection: If user operations generate harmful levels of airborne material that is not adequately
controlled by ventilation, wear a NIOSH approved respirator that provides adequate protection. Use the following
elements for air-purifying respirators: Air-Purifying Respirator for Dusts and Mists

Occupational Exposure Limits:

Component Limit TWA STEL Ceiling / Peak Notation
Proprietary DOCC Not Established NA NA NA

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE AND ODOR: White or yellowish Free flowing powder.

PH: NA
VAPOR PRESSURE: NA
VAPOR DENSITY (AIR=1): NA
BOILING POINT: NA
SOLUBILITY (in water): Soluble

SECTION 10 STABILITY AND REACTIVITY

Chemical Stability: This material is considered stable under normal ambient and anticipated storage and handling
conditions of temperature and pressure.
Conditions to Avoid: No Data Available
Incompatibility With Other Materials: No data available
Hazardous Decomposition Products: No Data Available
Hazardous Polymerization: Hazardous polymerization will not occur.

SECTION 11 TOXICOLOGICAL INFORMATION

IMMEDIATE HEALTH EFFECTS:

 山东福洋生物科技股份有限公司
SHANDONG FUYANG BIOTECHNOLOGY CO.,LTD
Acute Oral Toxicity: LD50 / rat / > 2500 mg/kg
Acute Dermal Toxicity: LD50 / rabbit / > 2000 mg/kg
Acute Inhalation Toxicity: LC50 / rat / > 2000 mg/m3 / 4 hour(s)

Eye Irritation: This material is not expected to be irritating to the eyes.

Skin Irritation: This material is not expected to be irritating to the skin.

ADDITIONAL TOXICOLOGY INFORMATION:

The toxicological properties of this product have not been tested or have not been tested completely and its handling
or use may be hazardous. EXERCISE DUE CARE.

Long-term exposure to high dust concentrations may cause non-debilitating lung changes.

SECTION 12 ECOLOGICAL INFORMATION

ECOTOXICITY:
The toxicity of this material to aquatic organisms has not been evaluated. Consequently, this material
should be kept out of sewage and drainage systems and all bodies of water.

ENVIRONMENTAL FATE:
This material is expected to be readily biodegradable.

SECTION 13 DISPOSAL CONSIDERATIONS

Use material for its intended purpose or recycle if possible. This material, if it must be discarded, may meet the criteria
of a hazardous waste as defined by China or other State and local regulations. Measurement of certain physical
properties and analysis for regulated components may be necessary to make a correct determination. If this material
is classified as a hazardous waste, federal law requires disposal at a licensed hazardous waste disposal facility.

SECTION 14 TRANSPORT INFORMATION

The description shown may not apply to all shipping situations. Consult appropriate Dangerous Goods Regulations,
for additional description requirements (e.g., technical name) and mode-specific or quantity-specific shipping
requirements.

Shipping Descriptions per regulatory authority.

US DOT
NOT REGULATED AS A HAZARDOUS MATERIAL OR DANGEROUS GOODS FOR TRANSPORTATION

ICAO / IATA
NOT REGULATED AS A HAZARDOUS MATERIAL OR DANGEROUS GOODS FOR TRANSPORTATION

IMO / IMDG
NOT REGULATED AS A HAZARDOUS MATERIAL OR DANGEROUS GOODS FOR TRANSPORTATION

RID / ADR
NOT REGULATED AS A HAZARDOUS MATERIAL OR DANGEROUS GOODS FOR TRANSPORTATION

SECTION 15 REGULATORY INFORMATION

SARA 311/312 CATEGORIES:

1. Immediate (Acute) Health Effects: NO
2. Delayed (Chronic) Health Effects: NO
3. Fire Hazard: NO
 山东福洋生物科技股份有限公司
SHANDONG FUYANG BIOTECHNOLOGY CO.,LTD
4. Sudden Release of Pressure Hazard: NO
5. Reactivity Hazard: NO

CHEMICAL INVENTORY LISTINGS:

CHINA: All the components of this product are listed on the draft Inventory of Existing Chemical Substances in China.
EUROPEAN UNION: All the components of this material are in compliance with the EU Seventh Amendment Directive
92/32/EEC.
JAPAN: All the components of this product are on the Existing & New Chemical Substances (ENCS) inventory in
Japan, or have an exemption from listing.
KOREA: All the components of this product are on the Existing Chemicals List (ECL) in Korea.
PHILIPPINES: All the components of this product are listed on the Philippine Inventory of Chemicals and Chemical
Substances (PICCS).
UNITED STATES: All of the components of this material are on the Toxic Substances Control Act (TSCA) Chemical
Inventory.

SECTION 16 OTHER INFORMATION

NFPA RATINGS: Health: 0 Flammability: 0 Reactivity: 0 Special: NA

(0-Least, 1-Slight, 2-Moderate, 3-High, 4-Extreme, PPE:- Personal Protection Equipment Index recommendation, *-
Chronic Effect Indicator).

REVISION STATEMENT: This revision updates all sections of the MSDS please review.

This data sheet was prepared by Dagang Oilfield Group Oilfield Chemical Co., Ltd, Erdaogou, Dagang
Oilfield, Tianjin, P.R. China #300280

The above information is based on the data of which we are aware and is believed to be correct as of the
date hereof. Since this information may be applied under conditions beyond our control and with which
we may be unfamiliar and since data made available subsequent to the date hereof may suggest
modifications of the information, we do not assume any responsibility for the results of its use. This
information is furnished upon condition that the person receiving it shall make his own determination of the
suitability of the material for his particular purpose.