Intrusion Alarm Systems | ISC‑PDL1‑W18x Professional Series TriTech Detectors

ISC‑PDL1‑W18x Professional Series

TriTech Detectors
www.boschsecurity.com

u 18 m x 25 m (60 ft x 80 ft) coverage, field selectable

to 8 m x 10 m (25 ft x 33 ft)

u EN50131-2-4 Grade 2 compliant

u Sensor data fusion technology

u Tri-focus optics technology

u Range adaptive radar

The ISC-PDL1-W18x Professional Series TriTech a white light level sensor. The microcontroller analyzes
Detectors are exceptionally suited for commercial and compares the sensor data to make the most
indoor applications. Sensor data fusion technology intelligent alarm decisions in the security industry.
ensures that the detectors send alarm conditions
Tri-focus Optics Technology
based on precise information. Tri-focus optics
Tri-focus optics technology uses optics with three
eliminate coverage gaps and respond efficiently to
specific focal lengths: long-range coverage, middle-
intruders. The powerful combination of unique
range coverage, and short-range coverage. The
features in the Professional Series delivers superior
detector applies the three focal lengths to 86
catch performance and virtually eliminates false
detection zones, which combine to make 11 solid
alarms.
curtains of detection. Tri-focus optics technology also
The self-locking two-piece enclosure, built-in bubble
includes two pyroelectric sensors, which deliver twice
level, flexible mounting height, and three optional
the standard optical gain. The sensors process
mounting brackets simplify installation and reduce
multiple signals to deliver precise performance
service time.
virtually free of false alarms.
Functions Range Adaptive Radar
The microwave transceiver automatically adjusts its
Sensor Data Fusion Technology
detection thresholds based on input from the PIR
Sensor data fusion technology is a unique feature that
sensors. Integrating the target audience distance
uses a sophisticated software algorithm to gather
information from the PIR significantly reduces false
signals from five sensors: two pyroelectric sensors,
alarms from the microwave Doppler radar.
range adaptive radar, a room temperature sensor, and
2 | ISC‑PDL1‑W18x Professional Series TriTech Detectors

Microwave Anti-mask Remote Self Test

The detector sends a supervision‑trouble signal if A remote self test initiates when the walk test input
microwave reflective material is placed within 30.5 cm switches to its true state. The alarm relay and alarm
(1 ft) of the detector. LED activate for four seconds following a successful
test. The trouble relay activates, and the alarm LED
Supervised Microwave and PIR
flashes following a failed test.
The detector provides single technology coverage if
the microwave subsystem fails. Input Power Supervision
When the power is lower than 8 V, a low input power
Active White Light Suppression
trouble condition activates the trouble relay and
An internal light sensor measures the level of light
causes the LED to flash. The trouble condition clears
intensity directed at the face of the detector. Sensor
automatically when power reaches or exceeds 8 V.
data fusion technology uses this information to
eliminate false alarms from bright light sources. Trouble Memory
When the walk test input switches to its true state for
Field Selectable Coverage (18 m x 25 m or 8 m x
10 m) less than two seconds, LED flashes to indicate the
Installers can use a DIP switch to select 18 m x 25 m most recent trouble condition. If there is no trouble in
or 8 m x 10 m (60 ft x 80 ft or 25 ft x 33 ft) coverage. memory, the LED does not flash. After twelve hours, or
after the detector receives a second walk test pulse
Dynamic Temperature Compensation for two seconds or less, the LED stops flashing and
The detector automatically adjusts PIR sensitivity to the trouble memory clears.
identify human intruders at critical temperatures.
Dynamic temperature compensation detects human Certifications and approvals
body heat accurately, avoids false alarms, and delivers
consistent catch performance at all operating The detectors are designed to also comply with the requirements of:
temperatures.
Australia C-Tick
Cover and Wall Tamper Switch
When an intruder removes the cover or attempts to Region Certification
separate the detector from the wall, a normally-closed
contact opens to alert the control panel. Australia SCEC eA1186637 [-W18G, -WA18G]

Self-adjusting LED Europe CE 2004/108/EC EMC Directive (EMC),

2006/95/EC Low-Voltage Directive
The LED brightness adjusts automatically to the (LVD), 1999/5/EC Radio equipment and
surrounding light level. A blue light-emitting diode Telecommunications Terminal Equip-
(LED) indicates dual alarms and activates during a ment (R&TTE), 2011/65/EU Restriction
of the use of certain hazardous substan-
walk test. A yellow LED indicates microwave ces in electrical and electronic equip-
detection, and a red LED indicates PIR detection. ment [-W18G, -W18H]
Remote Walk Test LED EN5013 EN50131-2-4:2008, Grade 2
Users can type a command through a keypad, a control 1
center, or programming software to remotely enable Belgium INCERT B-509-0052/f [-W18G]
or disable the walk test LED. Users can locally enable
or disable the walk test LED through the DIP switch. USA UL ANSR: Intrusion Detection Units
(UL639), ANSR7: Intrusion Detection
Alarm Memory Units Certified for Canada (cULus) [-
W18G]
Alarm memory flashes the alarm LED to indicate
stored alarms for use in multiple unit applications. A FCC (T3XISC-PDL1-W18G)
switched voltage from the control panel controls the
Italy IMQ (CA12.00833) [-G]
alarm memory.
Canada IC (1249A-W18G)
Solid State Relays
Solid state relays send silent alarm output signals to France AFNOR 2830390400A1 [-W18H]
provide a higher level of security and reliability. An
AFNOR 2830390400 [-W18G]
external magnet does not activate the relay. The solid
state relay uses less current than a mechanical relay, China CCC 2009031901000559 [-W18G]
providing longer standby capacity during a power loss. Sweden INTYG Nr11-850 [-W18G]
Draft, Insect, and Small Animal Immunity Brazil ANATEL 1282-06-1855 [-W18G]
The sealed optic chamber provides immunity to drafts
and insects, reducing false alarms. Small animal the Nether- REQ 07223002/AA/00 [-W18G]
lands
immunity reduces false alarms caused by animals less
than 4.5 kg (10 lb), such as rodents.
3 | ISC‑PDL1‑W18x Professional Series TriTech Detectors

Installation/configuration notes Mounting Considerations

The recommended mounting height is 2 m to 3 m (7 ft
0ft 7ft 13f t 20f t 26f t 33f t 39f t 46f t 52f t 59f t to 10 ft).
1
14m 46f t Use an optional B328 Gimbal-mount Bracket or B335-3
12m 39f t Low-profile Swivel-mount Bracket to surface-mount
2 10m 33f t
the detector on a flat wall or in a corner.
Use an optional B338 Universal Ceiling Bracket to
3
8m 26f t mount the detector on the ceiling.
6m 20f t
Wiring Considerations
4m 13f t Recommended wire size is 0.2 mm2 to 1 mm2 (26 AWG
2m 7ft to 16 AWG).

0m 1 90° 0ft Parts included

2m 7ft
Quantity Component
4m 13f t
1 Detector
6m 20f t

8m 26f t
2 Flat-head screws

10m 33f t 2 Screw anchors

12m 39f t 1 Nylon cable tie
14m 46f t 1 Pattern Mask
0m 2m 4m 6m 8m 10m 12m 14m 16m 18m
0ft 7ft 13f t 20f t 26f t 33f t 39f t 46f t 52f t 59f t 1 Installation Guide
3m 10f t
1 Technical specifications
3 2
0m 0ft
0m 2m 4m 6m 8m 10m 12m 14m 16m 18m Electrical
0 f t 7ft 13f t 20f t 26f t 33f t 39f t 46f t 52f t 59f t
Power Requirements
2m 7ft Voltage (Operating): 9 VDC to 15 VDC
0m 3
2 1
0ft
0m 2m 4m 6m 8m 10m 12m 14m 16m 18m Current (Maximum): < 25 mA
Long-range Coverage 18 m x 25 m (60 ft x 80 ft) Current (Standby): 13 mA

0ft 7ft 13f t 20f t 26f t Outputs

6m 20f t
Relay: Solid state relay, normally-closed (NC)
4m 13f t contacts power supervised.
2 3 W, 125 mA, 25 VDC,
2m 7ft
resistance < 10 Ω.
3 0m 2 90° 0ft
Tamper: Normally-closed (NC) contacts (with
2m 7ft cover on) rated at 25 VDC, 125 mA
maximum.
4m 13f t
Connect tamper circuit to 24-hour
6m 20f t protection circuit.
0m 2m 4m 6m 8m
0ft 7ft 13f t 20f t 26f t Trouble: Solid‑state relay normally-closed (NC)
contacts.
3m 10f t

3 2 Mechanical
0m 0ft
0m 2m 4m 6m 8m Enclosure Design
0ft 7ft 13f t 20f t 26f t
Color: White
2m 7ft Dimensions: 136 mm x 69 mm x 58 mm
0m
3 2 (5.25 in. x 2.75 in. x 2.25 in.)
0ft
0m 2m 4m 6m 8m
Material: High-impact ABS plastic

Selectable Short-range Coverage 8 m x 10 m Indicators

(25 ft x 33 ft) Alarm Indicator: • Blue LED for TriTech alarms
4 | ISC‑PDL1‑W18x Professional Series TriTech Detectors

• Yellow LED for microwave

detection

• Red LED for PIR detection

Zones

Zones: 86

Frequency Information

Radio Frequency No alarm or setup on critical

Interference (RFI) immunity: frequencies in the range from 26 MHz
to 1 GHz at 50 V/m.

Environmental

Relative Humidity: 0 to 95%, non-condensing

Temperature (Operating -29°C to +55°C (-20°F to +130°F)

and Storage): For UL Certificated installations, 0°C to
+49°C (+32°F to +120°F)

Environmental Class II EN 50130-5

Protection Rating: IP41, IK04 (EN 60529, EN 50102)

Ordering information

ISC‑PDL1‑W18G Professional Series TriTech Detector

Provides PIR and microwave, 18 m x 25 m (60 ft x 80
ft) coverage. 10.525 GHz frequency.
Order number ISC-PDL1-W18G

ISC‑PDL1‑W18H Professional Series TriTech Detector

Provides PIR and microwave, 18 m x 25 m (60 ft x 80
ft) coverage. 10.588 GHz frequency. For use in France
and United Kingdom.
Order number ISC-PDL1-W18H
Accessories
B328 Gimbal‑mount Bracket
Mounts on a single-gang box and allows rotation of a
detector. Wires are hidden inside.
Order number B328

B335-3 Swiveling low-profile mount

Swiveling, low-profile, plastic mount for wall mounting.
The vertical swivel range is +10° to -20°, while the
horizontal swivel range is ±25°. Available in triple
packs.
Order number B335-3

B338 Universal Ceiling‑mount Bracket

Swiveling plastic mount for ceiling mounting. The
vertical swivel range is +7° to -16°, while the horizontal
swivel range is ±45°.
Order number B338
 5 | ISC‑PDL1‑W18x Professional Series TriTech Detectors

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc. Bosch Security Systems B.V. Robert Bosch (SEA) Pte Ltd, Security Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
130 Perinton Parkway P.O. Box 80002 Systems 201 Building, No. 333 Fuquan Road Via Anhanguera, Km 98
Fairport, New York, 14450, USA 5617 BA Eindhoven, The Netherlands 11 Bishan Street 21 North IBP CEP 13065-900
Phone: +1 800 289 0096 Phone: + 31 40 2577 284 Singapore 573943 Changning District, Shanghai Campinas, Sao Paulo, Brazil
Fax: +1 585 223 9180 Fax: +31 40 2577 330 Phone: +65 6571 2808 200335 China Phone: +55 19 2103 2860
[email protected] [email protected] Fax: +65 6571 2699 Phone +86 21 22181111 Fax: +55 19 2103 2862
www.boschsecurity.us www.boschsecurity.com [email protected] Fax: +86 21 22182398 [email protected]
www.boschsecurity.asia www.boschsecurity.com.cn www.boschsecurity.com

© Bosch Security Systems 2014 | Data subject to change without notice

2607960459 | en, V21, 23. Dec 2014