SUBMITTAL

B-552.12A
REPRESENTATIVE:
JOB:

ORDER NO. DATE:

UNIT TAG:
SUBMITTED BY: DATE:
ENGINEER:
APPROVED BY: DATE:
CONTRACTOR:

3x3x7C
Series e-80SC PUMP VARIABLE SPEED CONTROL
In-Line Mounted Centrifugal Pumps Integrated Technologic ® Sensorless Control (ITSC)

Integrated Technologic ® (IT)

External input by others

Pressure Sensor(s)

Differential Pressure Sensor(s)

Flow Sensor(s)
SPECIFICATIONS MATERIALS OF CONSTRUCTION
Stainless Steel Fitted By Others
FLOW HEAD

HP RPM
MAXIMUM WORKING PRESSURE TYPE OF SEAL
VOLTS 175 psi (12 bar) with Standard Inside Unitized
INPUT 125# ANSI flange drilling (EPR/Carbon-Ceramic)
CYCLE PHASE 250 psi (17 bar) with Inside Unitized
ENCLOSURE 250# ANSI flange drilling (requires 250# Seal) (EPR/Carbon-Tungsten Carbide)-250#
Inside Unitized
APPROX. WEIGHT (FKM/Carbon-Ceramic)
MOUNTING
SPECIALS Inside Unitized
In-Line Piping Flange Supports
(EPR/SilCar/SilCar/SS)
Other seal, see description

Outside
(EPR/Carbon-Ceramic)-250#
Outside
(FKM/Carbon-Ceramic)-250#
 SUBMITTAL
B-552.12A
REPRESENTATIVE:
JOB:

ORDER NO. DATE:

UNIT TAG:
SUBMITTED BY: DATE:
ENGINEER:
APPROVED BY: DATE:
CONTRACTOR:

3x3x7C
Series e-80SC
PUMP VARIABLE SPEED CONTROL
In-Line Mounted Centrifugal Pumps
Integrated Technologic ® Sensorless Control (ITSC)

Integrated Technologic ® (IT)

External input by others

Pressure Sensor(s)

SPECIFICATIONS MATERIALS OF CONSTRUCTION Differential Pressure Sensor(s)

Stainless Steel Fitted
FLOW HEAD Flow Sensor(s)

HP RPM By Others
MAXIMUM WORKING PRESSURE
VOLTS 175 psi (12 bar) with
INPUT 125# ANSI flange drilling
TYPE OF SEAL
CYCLE PHASE Standard Inside Unitized
250 psi (17 bar) with
(EPR/Carbon-Ceramic)
ENCLOSURE 250# ANSI flange drilling (requires 250# Seal)
Inside Unitized
APPROX. WEIGHT (EPR/Carbon-Tungsten Carbide)-250#
MOUNTING Inside Unitized
SPECIALS
In-Line Piping Flange Supports (FKM/Carbon-Ceramic)
Inside Unitized
(EPR/SilCar/SilCar/SS)
Other seal, see description

Outside
(EPR/Carbon-Ceramic)-250#
Outside
(FKM/Carbon-Ceramic)-250#
 SUBMITTAL
B-552.12A
JOB: REPRESENTATIVE:

UNIT TAG: ORDER NO. DATE:

ENGINEER: SUBMITTED BY: DATE:

CONTRACTOR: APPROVED BY: DATE:

3x3x7C
Series e-80SC PUMP VARIABLE SPEED CONTROL
Integrated Technologic ® Sensorless Control (ITSC)
In-Line Mounted Centrifugal Pumps Integrated Technologic ® (IT)
External input by others

Pressure Sensor(s)

Differential Pressure Sensor(s)

SPECIFICATIONS MATERIALS OF CONSTRUCTION Flow Sensor(s)

Stainless Steel Fitted
FLOW HEAD By Others

HP RPM
MAXIMUM WORKING PRESSURE TYPE OF SEAL
VOLTS 175 psi (12 bar) with
Standard Inside Unitized
INPUT 125# ANSI flange drilling
(EPR/Carbon-Ceramic)
CYCLE PHASE 250 psi (17 bar) with
Inside Unitized
ENCLOSURE 250# ANSI flange drilling (requires 250# Seal)
(EPR/Carbon-Tungsten Carbide)-250#
APPROX. WEIGHT Inside Unitized
MOUNTING (FKM/Carbon-Ceramic)
SPECIALS Inside Unitized
In-Line Piping Flange Supports
(EPR/SilCar/SilCar/SS)
Other seal, see description

Outside
(EPR/Carbon-Ceramic)-250#
Outside
(FKM/Carbon-Ceramic)-250#
 B-552.12A

3x3x7C
Series e-80SC
Centrifugal Pump Submittal -
In-Line Piping

DIMENSIONS - Inches (mm) TC SHAFT MOTORS

125# ANSI 250# ANSI Suct/Disch
MOTOR Drain Tap
A B C D E (max) F G H (max) R V (min) Gauge Taps
FRAME J N P J N P (NPT)
(NPT)
9.50 19.00 4.98 6.25 12.05 11.75 5.85 29.65 6.00 4 0.75 6.63 8 0.88 7.19 4.50 0.25 0.25
143TC
(241) (483) (126) (159) (306) (298) (149) (753) (152) (19) (168) (22) (183) (114)
9.50 19.00 4.98 6.25 12.05 11.75 5.85 29.65 6.00 4 0.75 6.63 8 0.88 7.19 4.50 0.25 0.25
145TC
(241) (483) (126) (159) (306) (298) (149) (753) (152) (19) (168) (22) (183) (114)
9.50 19.00 4.98 6.25 12.25 12.00 5.85 30.10 6.00 4 0.75 6.63 8 0.88 8.75 4.50 0.25 0.25
182TC
(241) (483) (126) (159) (311) (305) (149) (765) (152) (19) (168) (22) (222) (114)
9.50 19.00 4.98 6.25 13.25 12.00 5.85 31.10 6.00 4 0.75 6.63 8 0.88 8.75 4.50 0.25 0.25
184TC
(241) (483) (126) (159) (337) (305) (149) (790) (152) (19) (168) (22) (222) (114)
9.50 19.00 4.98 6.25 14.88 12.00 5.85 32.73 6.00 4 0.75 6.63 8 0.88 10.63 4.50 0.25 0.25
213TC
(241) (483) (126) (159) (378) (305) (149) (831) (152) (19) (168) (22) (270) (114)
9.50 19.00 4.98 6.25 14.88 12.00 5.85 32.73 6.00 4 0.75 6.63 8 0.88 10.63 4.50 0.25 0.25
215TC
(241) (483) (126) (159) (378) (305) (149) (831) (152) (19) (168) (22) (270) (114)
9.50 19.00 4.98 6.25 19.44 12.00 5.85 37.29 6.00 4 0.75 6.63 8 0.88 12.31 4.50 0.25 0.25
254TC
(241) (483) (126) (159) (494) (305) (149) (947) (152) (19) (168) (22) (313) (114)
9.50 19.00 4.98 6.25 21.19 12.00 5.85 39.04 6.00 4 0.75 6.63 8 0.88 12.31 4.50 0.25 0.25
256TC
(241) (483) (126) (159) (538) (305) (149) (992) (152) (19) (168) (22) (313) (114)

Dimensions are subject to change. Not to be used for construction purposes unless certified.
NOTE: For TEFC add 1-1/2" to dimensions E & H.

Xylem Inc.
8200 N. Austin Avenue, Morton Grove, IL 60053
Phone: (847)966-3700 Fax: (847)965-8379
www.bellgossett.com
Bell & Gossett is a trademark of Xylem Inc. or one of its
subsidiaries. © 2019 Xylem Inc.
 B-552.12A

3x3x7C
Series e-80SC
Centrifugal Pump Submittal -
Flange Support Mounting

DIMENSIONS - Inches (mm) TC SHAFT MOTORS

125# ANSI 250# ANSI Suct/Disch
MOTOR HF 2HE HH Drain Tap
A HB HA E (max) F G H (max) R V (min) Gauge Taps
FRAME BOLTING BOLTING DIA J N P J N P (NPT)
(NPT)
9.50 20.95 24.45 21.50 25.00 0.88 12.05 11.75 5.85 29.65 6.00 4 0.75 6.63 8 0.88 7.19 4.50 0.25 0.25
143TC
(241) (532) (621) (546) (635) (22) (306) (298) (149) (753) (152) (19) (168) (22) (183) (114)
9.50 20.95 24.45 21.50 25.00 0.88 12.05 11.75 5.85 29.65 6.00 4 0.75 6.63 8 0.88 7.19 4.50 0.25 0.25
145TC
(241) (532) (621) (546) (635) (22) (306) (298) (149) (753) (152) (19) (168) (22) (183) (114)
9.50 20.95 24.45 21.50 25.00 0.88 12.25 12.00 5.85 30.10 6.00 4 0.75 6.63 8 0.88 8.75 4.50 0.25 0.25
182TC
(241) (532) (621) (546) (635) (22) (311) (305) (149) (765) (152) (19) (168) (22) (222) (114)
9.50 20.95 24.45 21.50 25.00 0.88 13.25 12.00 5.85 31.10 6.00 4 0.75 6.63 8 0.88 8.75 4.50 0.25 0.25
184TC
(241) (532) (621) (546) (635) (22) (337) (305) (149) (790) (152) (19) (168) (22) (222) (114)
9.50 20.95 24.45 21.50 25.00 0.88 14.88 12.00 5.85 32.73 6.00 4 0.75 6.63 8 0.88 10.63 4.50 0.25 0.25
213TC
(241) (532) (621) (546) (635) (22) (378) (305) (149) (831) (152) (19) (168) (22) (270) (114)
9.50 20.95 24.45 21.50 25.00 0.88 14.88 12.00 5.85 32.73 6.00 4 0.75 6.63 8 0.88 10.63 4.50 0.25 0.25
215TC
(241) (532) (621) (546) (635) (22) (378) (305) (149) (831) (152) (19) (168) (22) (270) (114)
9.50 20.95 24.45 21.50 25.00 0.88 19.44 12.00 5.85 37.29 6.00 4 0.75 6.63 8 0.88 12.31 4.50 0.25 0.25
254TC
(241) (532) (621) (546) (635) (22) (494) (305) (149) (947) (152) (19) (168) (22) (313) (114)
9.50 20.95 24.45 21.50 25.00 0.88 21.19 12.00 5.85 39.04 6.00 4 0.75 6.63 8 0.88 12.31 4.50 0.25 0.25
256TC
(241) (532) (621) (546) (635) (22) (538) (305) (149) (992) (152) (19) (168) (22) (313) (114)

Dimensions are subject to change. Not to be used for construction purposes unless certified.
NOTE: For TEFC add 1-1/2" to dimensions E & H.

Xylem Inc.
8200 N. Austin Avenue, Morton Grove, IL 60053
Phone: (847)966-3700 Fax: (847)965-8379
www.bellgossett.com
Bell & Gossett is a trademark of Xylem Inc. or one of its
subsidiaries. © 2019 Xylem Inc.
 B-552.12A

3x3x7C
Series e-80SC
In-Line Mounted Centrifugal Pumps
With Integrated Technologic Control

TECHNOLOGIC STANDARD FEATURES

CONTROL METHOD WITH Factory configured for sensorless
INTEGRATED operation.
TECHNOLOGIC®
SENSORLESS CONTROL
(ITSC)

CONTROL METHOD WITH Field configurable for sensor by

INTEGRATED others, building management
TECHNOLOGIC® (IT) system input, or optional sensor(s)
provided.

ENCLOSURE NEMA 12 (same as IP55 & UL

type 12)

POWER DISCONNECT Included standard. Fused

SWITCH Disconnect Switch optional with
three phase input voltage.

HARMONIC SUPPRESSION Integrated non-saturating dual DC

link reactors provide better
harmonic performance than a 5%
AC line reactor.

COOLING Fan-cooled through temperature

controlled and easy replacement.

AMBIENT TEMPERATURE 14°F to 113°F (-10°C to 45°C)

RATING

COMMUNICATION BACnet, Modbus RTU, N2

PROTOCOLS Metasys, FLN Apogee

ANALOG INPUTS 2 configurable for either voltage

(0 to 10VDC) or current(0/4 to
20mA)

ANALOG OUTPUTS 1 (0/4 to 20mA) up to 500 ohm

load accurate to 1% of full scale

DIGITAL INPUTS 4 (0 to 24VDC), NPN or PNP, 0 to

24VDC, on 5 msec scan interval,
Up to 2 can be configured as pulse
inputs.

DIGITAL OUTPUTS 2 (0 to 24VDC), 40mA max

current, configurable as pulse
outputs.

RELAY OUTPUTS 2 programmable, 240VAC or

400VAC up to 2 A

MINIMUM CONTROL HEAD _______ ft (default set to 40% of

design head if not unknown)

Xylem Inc.
8200 N. Austin Avenue
Morton Grove, IL 60053
Phone: (847)966-3700 Fax: (847)965-8379
www.bellgossett.com
Bell & Gossett is a trademark of Xylem Inc. or one of its
subsidiaries. © 2019 Xylem Inc.
 B-552.12A
Series e-80SC 3x3x7C
Centrifugal Pump Submittal
with Integrated Technologic Control

DIMENSIONS - Inches (mm) TC SHAFT MOTORS

MOTOR
VFD Rv Zv W Hv Xv
FRAME
12.00 11.53 9.50 32.64 4.56
143TC A5
(305) (293) (241) (829) (116)
12.00 11.53 9.50 32.64 4.56
A5
(305) (293) (241) (829) (116)
145TC
14.29 13.13 9.50 34.99 6.16
B1
(363) (334) (241) (889) (157)
12.78 12.03 9.50 32.53 2.53
A5
(325) (306) (241) (826) (64)
182TC
15.07 13.63 9.50 33.53 4.13
B1
(383) (346) (241) (852) (105)
12.78 12.03 9.50 33.53 2.53
A5
(325) (306) (241) (852) (64)
184TC
15.07 13.63 9.50 34.53 4.13
B1
(383) (346) (241) (877) (105)
13.53 12.56 9.50 32.38 3.03
A5
(344) (319) (241) (822) (77)
15.84 14.22 9.50 33.81 4.72
213TC B1
(402) (361) (241) (859) (120)
15.84 14.22 9.50 39.55 4.72
B2
(402) (361) (241) (1005) (120)
13.53 12.56 9.50 32.38 3.03
A5
(344) (319) (241) (822) (77)
15.84 14.22 9.50 33.80 4.82
B1
(402) (361) (241) (858) (122)
215TC
15.84 14.22 9.50 39.54 4.82
B2
(402) (361) (241) (1004) (122)
17.81 17.42 12.10 41.56 8.02
C1
(452) (442) (307) (1056) (204)
16.83 14.92 9.50 38.98 5.42
B1
(427) (379) (241) (990) (138)
16.83 14.92 9.50 43.45 5.42
254TC B2
(427) (379) (241) (1104) (138)
18.80 18.12 12.10 44.71 8.62
C1
(477) (460) (307) (1136) (219)
16.83 14.92 9.50 39.00 5.42
B1
(427) (379) (241) (991) (138)
16.83 14.92 9.50 43.45 5.42
B2
(427) (379) (241) (1104) (138)
256TC
18.83 17.09 12.09 44.36 7.59
C1
(478) (434) (307) (1127) (193)
19.61 19.39 14.59 49.02 9.89
C2
(498) (493) (371) (1245) (251)

Kv=2 (50)

Xylem Inc.
8200 N. Austin Avenue, Morton Grove, IL 60053
Phone: (847)966-3700 Fax: (847)965-8379
www.bellgossett.com
Bell & Gossett is a trademark of Xylem Inc. or one of its
subsidiaries. © 2019 Xylem Inc.
 D-171A

Pressure Sensor/Transmitter For Pumps

with TECHNOLOGIC® Drives
FEATURES
• 4-20mA output
• 10-28 VDC supply voltage
• Operating Temperature -40 to 85°C
(-40 to 185°F)
• Storage Temperature -40 to 100°C
(-40 to 212°F)
• Enclosure IP-66 (housing only)
• High Strength Stainless Steel Construction
• No Oil, Welds or Internal O-rings
• Wide Operating Temperature TECHNOLOGIC ANALOG SENSOR WIRING
• Low Static and Thermal Errors
• Compatible with Wide Variety of Liquids
and Gases
• EMI/RFI Protection
• UL/cUL 508 Approved (with housing)
• 1lb. (0.45 kg) approximate weight

B&G PART NUMBERS

S13203 Pressure range: 0-100 psi (0-689 kPa)
S13204 Pressure range: 0-300 psi (0-2068 kPa)

Consult factory for other ranges.

INSTALLATION CONSIDERATIONS
• Standard 24 AWG (0.61 mm dia.) 2 wire shielded
cable located in a conduit separate from high
voltage wiring
• 24 vdc power supplied from Technologic Controller

DIMENSIONAL INFORMATION
Dimensions in Inches (Millimeters)
O 0.875 (22)
Jacketed Cable
10 ft. (3 m) long,
0.156 (3.962) dia.

Shrink Tubing
3/8" (9.5 mm) dia. 1/4 Male NPT
0.875" (22 mm)
HEX
 D-172A

Differential Pressure FEATURES

Sensor/Transmitter • Relays reading to the Technologic controller up to
2000 ft. (610 m) away
for Pumps with • All wetted parts are 316 stainless steel

TECHNOLOGIC® Drives • Built-in RFI filter effective from 20 to 1000 MHZ

• Withstands static pressures up to 2300 PSI (15858 kPa)
TECHNOLOGIC ANALOG • 3 Valve bypass manifold (optional)
SENSOR WIRING •10 lbs. (4.5 kg) approximate weight

B&G PART NUMBERS

S100089 Pressure range: 0 - 40 psi (0 - 276 kPa)
S100091 Pressure range: 0 - 70 psi (0 - 483 kPa)
S100092 Pressure range: 0 - 100 psi (0 - 689 kPa)

Consult factory for other ranges.

INSTALLATION CONSIDERATIONS
• Standard 18 AWG (1.194 mm dia.) 2 wire shielded
cable located in a conduit separate from high
voltage wiring
• 24 vdc power supplied from Technologic Controller
for distance <2000 ft (610 m)
DIMENSIONAL INFORMATION
Dimensions in Inches (Millimeters)
0.79 (20)

0.59 5.43 (138) 3.94 (100)

~1.18 (30)
(15) 1.97
(50)
1.97 (50)
O3.15 (80)

7.8 (198)

10.28 (261)
5.28 (134)

2.68
2.83 (72)
4.13 (105) (68)
4.72 (120)

1 Process connection 1/4-18NPT for absolute 6 Electronic side, no digital display

pressure (+) side 7 Access cover over magnetic pushbuttons
2 Mounting thread 7/16-20 UNF to EN 61518 8 Sealing screw with vent shown (optional)
3 Dummy plug 9 Side vent for measuring liquid
4 Electrical connection: Screwed gland 1/2-14 NPT 10 Side vent for measuring gas (supplement H02)
5 Connection side 11 Mounting bracket (2 shackles, 4 nuts, 4 U-plates,
1 angle) made of steel
 D-164G

Flow Sensor/Transmitter For Pumps

with TECHNOLOGIC® Drives
The rugged Bell & Gossett Flow Sensor/Transmitter
precisely measures system flow and transmits a
proportional 4 to 20 mA DC signal to the Technologic
Controller for display or program calculations.
DIMENSIONAL INFORMATION
STANDARD FEATURES
Dimensions in Inches (Millimeters)
• Optional software and cable available for field
programming
36 (914) MAX.
• Suitable for mounting in vertical pipe
• Suitable for mounting in horizontal pipe 4.23
within 45° of top dead center (107)
• Non-magnetically sensed, non-fouling paddle wheel
0.660 (17)
• NEMA 4X Transmitter Enclosure
• Maximum Pressure Ratings:
1000 psi @ 100ºF, 900 psi @ 200ºF,
750 psi @ 300ºF (6895 kPa @ 38ºC, 6205 kPa @ 93ºC, 1" NPT
5171 kPa @ 149ºC)
• Maximum Temperature Ratings:
Fluid - 300ºF (149ºC) continuous service
Electronics - 150°F (66ºC)
• 9.9 lbs (4.5 kg) approximate weight
TECHNOLOGIC ANALOG SENSOR WIRING
INSTALLATION CONSIDERATIONS
• Standard 18 AWG (1.194 mm dia.) gauge 3 wire
shielded cable located in conduit separate from
high voltage wiring
• 24 vdc power supplied from Technologic Controller
• Takes accurate readings and relays them to
the Technologic Controller up to 2,000 ft.
(610 m) away, when 10 pipe diameters upstream
and 5 pipe diameters downstream of straight
uninterrupted flow is present.

CALIBRATION CHART
B&G Part No. Pipe Size Max. Flow
137411 3" Sch 40 250 gpm (16 l/sec)
137412 4" Sch 40 400 gpm (25 l/sec)
137413 6" Sch 40 850 gpm (54 l/sec)
137414 8" Sch 40 1750 gpm (110 l/sec)
137415 10" Sch 40 3150 gpm (199 l/sec) Flow Sensor
137416 12" Sch 40 5000 gpm (315 l/sec)
10 x Pipe Dia. 5 x Pipe
137417 14" Sch 40 6400 gpm (404 l/sec) Dia.
137418 16" Sch 40 9100 gpm (574 l/sec)
137419 18" Sch 40 12400 gpm (782 l/sec)
FLOW
137420 20" Sch 40 16500 gpm (1041 l/sec)

Consult factory for custom flow range calibration.