Scribd
Upload
97 views

CS-4809C TDS

This document provides product information for a polyether defoamer. It describes the product's features, composition, properties, usage instructions, packaging, and storage requirements. Testing data is also included to specify the product's defoaming and inhibition rates under laboratory conditions.

Uploaded by

labmatekonsulentteknika
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
97 views

CS-4809C TDS

This document provides product information for a polyether defoamer. It describes the product's features, composition, properties, usage instructions, packaging, and storage requirements. Testing data is also included to specify the product's defoaming and inhibition rates under laboratory conditions.

Uploaded by

labmatekonsulentteknika
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SIXIN® DEFOAMER CS-4809C

PRODUCT DESCRIPTION
CS-4809C defoamer is a polyether defoamer. The key recommended application industries are
fermentation industry and desalination.
FEATURES
● The substance components of the antifoam do not contain the substances listed in the SVHC
list of the REACH Regulation.
● Antifoaming agent component does not contain NP, APEO.
● Better alkali-resistance and acid-resistance at a wide pH range(3.0-14.0).
● Excellent antifoaming performance.
COMPOSITION
● Composed of hydroxy compounds and synergists.
TYPICAL PROPERTIES
Index Result Test Method
Colorless to light yellow transparency
Appearance liquid at room temperature, without Ocular Estimate
any impurities
pH 5.0-8.0 1% aqueous solution
Viscosity(25℃) 400-1000 GB/T 5561-2012
Note：The information above is for reference and shall not be deemed as a technical indicator.

HOW TO USE
●This product is a compound and it has stable thermodynamic. This product will not stratify
after long placed.
●This product can’t be diluted with water. If it is diluted with water, this product may appear
stratified; finally lead to the cost increase, SIXIN Company accepts no responsibility.
● It is suggested the defoamer should be added direct pumping in the place where the defoamer
is easy to disperse easily
PACKAGE AND STORAGE
The product is available in 25kg, 200-kg plastic bucket,1000-kg ton bucket. This product should
be stored in cool and dry place. Don’t near the heat source or sunlight. When stored between 5
and 40℃(41-104℉) in the original unopened containers, the product has a usable life of 12
months from the date of manufacture

Yangzhou SIXIN New Material Technology Co., Ltd.


Hotline: 400 838 7799
Fax: +86-25-85080900
Website：http://www.sixinchem.com
E-mail：[email protected]
STANDARD：Q320106 SXKJ 007-2022
LIMITIED WARRANTY INFORMATION
Please read carefully: The information contained herein is offered from experiences and
knowledge in our company. The proposed application method of this product is for reference
only. If it is not sure that the product is safe, effective, and fully satisfactory for the intended end
use, please contact the dealer or SIXIN directly. It is recommended that the customer conduct
preliminary tests, ensuring product safety and effectiveness. Each customer has different system
conditions.
Please get in contact with the SIXIN Company if you are uncertain that your product is meeting
guarantees. If the product is not in accordance with product standards, SIXIN will assume
liability and refund the payment of goods or replace the product. Our company can provide the
SDS on request.

Yangzhou SIXIN New Material Technology Co., Ltd.


Hotline: 400 838 7799
Fax: +86-25-85080900
Website：http://www.sixinchem.com
E-mail：[email protected]
Attachment 1
Defoaming rate(ml/s) >15
Inhibition rate(%)>60
The above data is obtained by laboratory testing, and the data is for reference only
1 Test Conditions:
Test temperature: 35℃
Test flow: 6L/min
Test medium type: Brown sugar fermentation broth
Test medium dosage: 200ml
Antifoam use method: Direct addition of antifoam stock solution
Antifoam added amount: 0.014g
2 test method
Add 200ml of self-made brown sugar fermentation broth to a 500mL clean measuring cylinder, start the air
drum, and record the time when the foam rises to 500ml. Add one drop of the defoaming agent to be tested,
wait until the foam completely disappears, turn on the air drum again, and record the change law of the foam
with time.
3 Elimination and suppression rate calculation method
In the absence of an antifoaming agent, the foaming liquid is bubbled through a drum or cycle so that the foam
reaches the set volume, and then the defoaming agent is added to record the maximum volume that the foam
can eliminate, as well as the time. The defoaming efficiency is characterized by the volume of foam that can be
eliminated by the defoamer per unit time. Record the change in foam volume over time and the time at which
the foam volume reaches the set volume again is recorded. The ratio of foam volume to total foam volume that
can be eliminated during each recording time period is the defoaming rate during the recording time. The
overall area is calculated as the area map formed by the defoaming rate per recording time as the overall foam
suppression rate.
a. Defoaming rate(ml/s)
Definition: The volume of foam that can be eliminated by the defoamer per unit time(15s) to characterize the
defoaming efficiency

b. Overall foam suppression rate during recording time(%)


Definition: The overall area is calculated as the area map formed by the defoaming rate per recording time as
the overall foam suppression rate
b0 Defoaming rate per recording time(%)
Definition: The ratio of foam volume to total foam volume that can be eliminated during each recording time
period.

Yangzhou SIXIN New Material Technology Co., Ltd.


Hotline: 400 838 7799
Fax: +86-25-85080900
Website：http://www.sixinchem.com
E-mail：[email protected]
b11

b22

W ——Defoaming rate during recording time


1
When the recording time interval is different
2
When the recording time interval is the same
v1 ——Foam volume eliminated after defoamer addition
v ——Foam volume circulating from the liquid level to the height of the set cylinder
vn ——The remaining volume of the foam during the recording time
w1~n ——Defoaming rate at each time point
t1~n ——Recording time
t ——The time from the lowest point after the addition of the defoamer to the height of the set
cylinder
t’ ——Defoaming time after defoamer addition
T ——Interval time
k ——Time constant, the default setting is 10min (600s), which is the defoaming rate of defoamer in
10min (600s)

1 当记录时间区间不同时
2 当记录时间区间一致时

Yangzhou SIXIN New Material Technology Co., Ltd.


Hotline: 400 838 7799
Fax: +86-25-85080900
Website：http://www.sixinchem.com
E-mail：[email protected]

You might also like