Scribd
Upload
8 views

Instruction

Uploaded by

artprroo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
8 views

Instruction

Uploaded by

artprroo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

In this action convert your image to Engraver Halftone Pro Photoshop Action.

This action has been tested and works photoshop CS6, CC, CC 2015,
CC 2015.5, CC 2017, CC 2018, CC 2019 + version.

INSTRUCTIONS

1. Your Photoshop document must be in RGB colour mode. To check this, go to the
menu Image -> Mode -> RGB Colour check the right screenshot.
Check in Figure 1.

2. Your Photoshop document must be setup in 8bits/Channel. To check this, to the


menu Image -> Mode -> 8bits/Channel check the right screenshot.
Check in Figure 1.

3. Press B to select the Brush tool. On the top toolbar, make sure Mode is Normal,
and both Opacity and Flow values are set to 100%. Check in Figure 3

4. On the Layers panel, click on the menu icon on the top-right corner. Go to Panel
Options…, and make sure that the Use Default Masks on Fill Layers and
Add “copy” to Copied Layers and Groups are checked. Check in Figure 2

5. You are running the English version of Photoshop.

6. For best result, it is recommended to use image size between 2000-3500 pixels.
For more optimal result, it is recommended to use image with size of 2500 pixels.

If you have a lower resolution image, go to "Image" > "Image Size..." and change
them to the specified dimensions. After the action has finished rendering, you can
always reduce to your original size.

Figure 1 Figure 2

Figure 3
HOW TO USE ACTION:

1. Open your photo .

2. Load the " Engrave Halftone Pro .atn " file.

> go to window > Actions.


on the Action panel , click on the top right icon to drop down the menu.
from the menu select " Load Actions " and browse to the
" Engrave Halftone Pro .atn " file.

3. Load the "Ehp_Gradients .grd" file.

> go to Edit > Preset Manager > select gradients and click Load.

4. Load the "Ehp_Patterns .pat" file.

> go to Edit > Preset Manager > select patterns and click Load.

5. On a new layer named " brush ". brush over interested subject.
Check in Figure 4

6. Play " Engrave Halftone Pro Play Action " Action.

7. Customize your final artwork.

select the effect and


press the Play button in sequence!

Figure 4

PLEASE, DON’T FORGET TO RATE THIS PRODUCT


Thanks...

You might also like