HEAT PUMP MSA Serie

REMOTE CONTROLLER MANUAL

Invest Living Scandinavia AB

Gyllings väg 9 - 572 36 Oskarshamn - Sweden
www.investliving.se - [email protected]

Thank you very much for purchasing our air conditioner.

Please read this owner's manual carefully before using
your air conditioner. Make sure to save this manual for
The design and specifications are subject to change without prior future reference.
notice for product improvement. Consult with the sales agency or
manufacturer for details.
 Remote Controller Specifications
CONTENTS
Model RG66B7/BGEF
Remote controller Specifications................................................... 2
Rated Voltage 3.0V(Dry batteries R03/LR03×2)
Function buttons .................. ......................................................... 3
Signal Receiving Range 8m
Handling the remote controller ...................................................... 4
Environment -5OC~60OC
Remote LCD screen indicators ..................................................... 5
How to use the basic functions........................................................ 6
NOTE:
How to use the advanced functions ............................................... 13
Buttons design is based on typical model and might be slightly different from the
actual one you purchased, the actual shape shall prevail.
All the functions described are accomplished by the unit. If the unit has no this
feature, there is no corresponding operation happened when press the relative
button on the remote controller.
,, ,,
,,When there are wide differences between Remote controller Illustration and ,,
,, ,,
USER'S MANUAL on function description, the description of USER'S MANUAL
shall prevail.

1 2
 Function Buttons HANDLING THE REMOTE CONTROLLER
TIPS FOR USING REMOTE CONTROL
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote NOT SURE WHAT A FUNCTION DOES?
control. The following is a brief introduction to the remote control itself. For instructions on how to Refer to the How to Use Basic Functions The remote control must be used within 8
operate your air conditioner, refer to the How to Use The Basic/Advance Functions section of and How to Use Advanced Functions meters of the unit.
this manual. sections of this manual for a detailed The unit will beep when remote signal is
NOTE：Please do not select HEAT mode if the machine you purchased is cooling only description of how to use your air conditioner. received.
type. Heat mode is not supported by the cooling only appliance. Curtains, other materials and direct
SPECIAL NOTE sunlight can interfere with the infrared
FAN signal receiver.
ON/OFF Selects fan speeds in Button designs on your unit may differ Remove batteries if the remote control
Turns the unit on or off the following order: slightly from the example shown. will not be used more than 2 months.
AUTOg LOW g If the indoor unit does not have, a particular
MED g HIGH function, pressing that function s button on
MODE the remote control will have no effect.
Scrolls through operation NOTE: Holding this button
modes as follows: down for 2 seconds will INSERTING AND REPLACING BATTERIES
AUTO g COOL g DRY g activate Silence feature.
Your air conditioning unit comes with two
HEAT g FAN AAA batteries. Put the batteries in the
TEMP
Increases temperate in remote control before use:
ECO 1. Remove the back cover from the remote
Starts and stops energy 1OC increments.
Max. temperature is 30OC. control, exposing the battery compartment.
efficient feature. If hold 2. Insert the batteries, paying attention to
down this button for match up the (+) and (-) ends of the
TEMP
more than 2 seconds, Mode ON/OFF Fan
batteries with the symbols inside the
the sleep feature is Decreases temperate in
1OC increments. battery compartment.
activated. 3. Install the back cover on.
Min. temperature is 17OC.
TIMER
SWING INSTALLING REMOTE CONTROL HOLDER
Sets timer to turn unit on Timer Used to stop or start hori-
and off(see How to Use The remote controller can be attached to a wall Remove the back cover
zontal louver movement
Basic Functions for or stand by using a remote controller holder to install batteries
or set the desired up/down
instructions) LED Follow
(optional part, not supplied with the unit).
me
air flow direction. The louver
LED Self
changes 6 degree in angle 1. Before installing the remote controller, check
, Turbo Short
clean for each press. If keep that the air conditioner receives the signals
Turns indoor unit s LED cut
pushing more than 2 properly.
display on and off.
seconds, the louver will
2. Install the holder with two screws.
swing up and down
automatically. 3. Put the remote controller in the holder.
FOLLOW ME
Temperature sensing and SWING
room temperature display Used to stop or start vertical BATTERY NOTES
button. louver movement and set the
desired left/right air flow For optimum product performance:
TURBO direction. The vertical louver Do not mix old and new batteries, or
changes 6 degree in angle batteries of different types.
Enables unit to reach
for each press. If keep Do not leave batteries in the remote control
preset temperature in pushing more than 2 seconds, ,
if you don t plan on using the device for
shortest possible time. the vertical louver auto swing more than 2 months.
If hold down this button feature is activated.
for more than 2 seconds, SELF CLEAN
the Fresh feature is Starts and stops the unit BATTERY DISPOSAL Put the remote controller
activated. self clean feature. in the holder.
SHOUT CUT Do not dispose of batteries as unsorted
Sets and activates your municipal waste. Refer to local laws for
favourite pre-settings. proper disposal of batteries.

3 4
Remote LCD Screen Indicators How To Use The Basic Functions
Information are displayed when the remote controller is powered up.
SETTING TEMPERATURE
The operating temperature range for units is
ON/OFF display 17-30 OC. You can increase or decrease the
Appears when the unit set temperature in 1 OC increments.
is turned on, and disappears
when the it is turned off.

AUTO operation

Transmission Indicator 3 In AUTO mode, the unit will automatically

Lights up when remote select the COOL, FAN, HEAT or DRY mode
sends signal to indoor
Displays when ECO 1 Mode ON/OFF Fan 2 based on the set temperature.
feature is activated 1. Press the MODE button to select Auto mode.
unit
Battery display 2. Set your desired temperature using the
MODE display Low battery detection
Temp or Temp button.
Displays the current
Timer 3. Press the ON/OFF button to start the unit.
Temperature/Timer display ,
mode, including: Follow NOTE: FAN SPEED can t be set in Auto mode.
Displays the set temperature LED me

by default, or timer setting Short Self

when using TIMER ON/OFF
Turbo clean
cut

functions
TIMER ON display Temperature range:
( ) 17-30oC
Displays when TIMER Timer setting range:
ON is set 0-24 hours
TIMER OFF display This display is blank when
( ) operating in FAN mode.
COOL operation
Displays when TIMER
Fan speed display
OFF is set
Displays selected fan speed: 1. Press the MODE button to select
COOL mode.
Low speed
Silence feature 2. Set your desired temperature using 4
display Not available for Medium speed the Temp or Temp button.
this unit 3. Press the FAN button to select the 2
Follow me feature fan speed.
1 Mode ON/OFF Fan

display Not available for High speed

this unit 4. Press the ON/OFF button to start the
LOCK feature unit. 3
display Sleep mode display Auto fan speed Timer

This fan speed can not be LED Follow

adjusted in AUTO or DRY me

mode. Turbo Short Self

clean
cut

Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
operation only the relative functional signs are shown on the display window.

5 6
How To Use The Basic Functions How To Use The Basic Functions

HEAT operation
DRY operation(dehumidifying)
1. Press the MODE button to select
1. Press the MODE button to select DRY HEAT mode.
mode. 2. Set your desired temperature using
2. Set your desired temperature using the the Temp or Temp button.
Temp or Temp button. 3. Press the FAN button to select the
3. Press the ON/OFFbutton to start the unit. fan speed.
, 4. Press the ON/OFF button to start the
NOTE: FAN SPEED can t be changed in unit.
DRY mode.
1 Mode ON/OFF Fan 2 1 Mode ON/OFF Fan 2
3 4
3 NOTE: As outdoor temperature drops, the
Timer
Timer
,
performance of your unit s HEAT function
LED Follow
Follow
may be affected. In such instances, we
recommend using this air conditioner in
me LED me

Turbo Short
cut
Self
clean Turbo Short Self
clean
conjunction with other heating appliance.
cut

FAN operation

1. Press the MODE button to select FAN

mode. Mode ON/OFF Fan 2
2. Press the FAN button to select the 1
fan speed. 3
3. Press the ON/OFFbutton to start the
unit. Timer
,
NOTE: You can t set temperature in FAN, LED Follow

mode. As a result, your remote control s

me

LCD screen will not display temperature. Turbo Short

cut
Self
clean

7 8
 TIMER OFF function
Setting the TIMER function The TIMER OFF function allows you to NOTE: When setting the TIMER ON or
set a period of time after which the unit TIMER OFF functions, up to 10 hours,
x5
1 2 will automatically turn off, such as when the time will increase in 30 minute
Your air conditioning unit has two
timer-related functions: you wake up. increments with each press. After 10
TIMER ON- sets the amount of timer after 1. Press the Timer button, the Timer off hours and up to 24, it will increase in 1
which the unit will automatically turn on. Timer or hour increments. The timer will revert to
indicator " " displays and flashes. By
TIMER OFF- sets the amount of time after default, the last time period that you set zero after 24 hours.
which the unit will automatically turn off. and an "h" (indicating hours)will appear You can turn off either function by
on the display. setting its timer to " 0.0h " .
TIMER ON function
Note: This number indicates the
The TIMER ON function allows you to set
amount of time after the current time
a period of time after which the unit will 3 4 that you want the unit to turn off.
automatically turn on, such as when you
come home from work.
3sec For example, if you set TIMER OFF for
5 hours, " 5.0h " will appear on the
1. Press the Timer button, the Timer on screen, and the unit will turn off after
indicator " " displays and flashes. By 5 hours.
default, the last time period that you set 2. Press the Temp or Temp button
and an "h" (indicating hours)will appear repeatedly to set the time when you want
on the display. MO
ON/
OFF

the unit to turn off.

Note: This number indicates the
DE
SH
CUORT

3. Wait 3 seconds, then the TIMER OFF

FA
N TE T
MP TIM
ER
SLEE ON

amount of time after the current time

P TIM
ER
OFF

function will be activated. The digital

that you want the unit to turn on. display on your remote control will then
For example, if you set TIMER ON for Example: Setting unit to turn on after 2.5
hours. return to the temperature display. The
2.5 hours, " 2.5h " will appear on the " " indicator remains on and this
screen, and the unit will turn on after function is activated.
2.5 hours.
2. Press the Temp or Temp button
repeatedly to set the time when you want
the unit to turn on.
1 2
3. Wait 3 seconds, then the TIMER ON x10
function will be activated. The digital
display on your remote control will then
return to the temperature display. The Timer or
" " indicator remains on and this
function is activated.

3 4
3sec

ON
/OFF

MOD
E SH
FA CUORT
N TE T
MP TIM
ER
SLEE ON
P TIM
ER
OF
F

Example: Setting unit to turn off after 5

hours.

9 10
Setting both TIMER ON and TIMER OFF at the same time Example: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off
(see the figure below)
Keep in mind that the time periods you set for both functions refer to hours after the
current time. For example, say that the current time is 1:00 PM, and you want the unit Your remote display
to turn on automatically at 7:00 PM. You want it to operate for 2 hours, then automa-
tically turn off at 9:00 PM.

Do the following:
Timer is set To turn ON
6 hours from current time

1 2 3 4
X12
3sec
or Timer is set to turn OFF
Timer 8 hours from current time

ON
/OFF

MO
DE
SH
CUORT
TE T
MP TIM
ER
ON

Unit turns Unit turns

Timer starts
ON OFF
5 6 7 8
X16
3sec
Timer or

Current 2PM 3PM 4PM 5PM 6PM 7PM 8PM 9PM

MO
DE
ON
/OFF
time 1PM
SH
CUORT
TE T
MP TIM
ER
ON
6 hours later
8 hours later

11 12
How To Use The Advanced Functions How To Use The Advanced Functions

ECO function
Silence function
NOTE: This function is only available under
COOL mode. Hold down Fan speed button for 2 seconds
Used to enter the energy efficient mode. to activate/cancel Silent mode. Due to low
Under cooling mode, press this button, frequency operation of compressor, it may
the remote controller will adjust the result in insufficient cooling and heating
Hold down Fan capacity. (applicable to the air conditioner
temperature automatically to 24OC, fan
button for 2 with Silent feature only)
speed of Auto to save energy(but only
seconds to activate
if the set temperature is less than 24OC).
Silence function
If the set temperature is above 24OC ,
press the ECO button, the fan speed Mode ON/OFF Fan Mode ON/OFF Fan 8OC Heating Function
will change to Auto, the set temperature When the air conditioner operates
will remain unchanged. under heating mode with the set
NOTE: Hold down this temperature of 17 OC, press Temp
Pressing the ECO button, or modifying Timer button for 2 Timer Press this button button twice in one second will
the mode or adjusting the set temperature seconds to twice in one second activate 8 Degree heating function.
to less than 24OC will stop ECO operation. LED Follow
me activate sleep LED Follow
me to activate 8OC The unit will operate at a setting
Under ECO operation, the set temper- function heating function temperature of 8 OC.,,The indoor
ature should be 24OC or more. it may
Turbo Short
cut
Self
clean Turbo Short
cut
Self
clean
unit display shows FP .
,,
result in insufficient cooling. If you feel
uncomfortable, just press the ECO Hold down this button
button again to stop it. for 2 seconds to SHORTCUT function
activate fresh function
SLEEP Function Used to restore the current settings or
Hold together for one second resume previous settings.
The SLEEP function is used to decrease to activate LOCK function Push this button when remote controller
,
energy use while you sleep (and don t is on, the system will automatically revert
need the same temperature settings to TURBO function
back to the previous settings including
stay comfortable). This function can LOCK function The TURBO function makes the unit work operating mode, setting temperature, fan
only be activated via remote control. extra hard to reach your present temperature
the ,detail, see ,, sleep operation ,, in
speed level and sleep feature (if activated).
Press Turbo button and Self clean
,For
, USER S MANUAL.
,, button simultaneously for one second
in the shortest amount of time possible. If pushing more than 2 seconds, the
When you select TURBO feature in COOL system will automatically restore the
Note: The SLEEP function is not to lock or unlock the keyboard. mode, the unit will blow cool air with current operation settings including
available in FAN or DRY mode. strongest wind setting to jump-start the operating mode, setting temperature,
cooling process. fan speed level and sleep feature
Self clean function When you select TURBO feature in HEAT (if activated ).
Airborne bacteria can grow in the moisture mode, for units with Electric heat elements,
Follow me function
that condenses around heat exchanger in the Electric Heater will activate and
The Follow me function enables the the unit. With regular use, most of this jump-start the heating process.
remote control to measure the temperature moisture is evaporated from the unit.
at its current location and send this signal Hold down TURBO button for 2 seconds, the
When the self clean feature is activated, Ionizer/Plasma Dust Collector(depending
to the air conditioner every 3 minutes interval. your unit will clean itself automatically. After
When using AUTO, COOL, or HEAT modes, on models) is energized and will help to remove
cleaning, unit will turn off automatically. pollen and impurities from the air.
measuring ambient temperature from the
remote control (instead of from the indoor You can use self clean feature as often as
unit itself) will enable the air conditioner to you like.
optimize the temperature around you and Note: You can only activate this function
ensure maximum comfort. in COOL or DRY mode.

13 14