INDUSTRIAL HOSES

PRODUCT CATALOGUE

2024
TABLE OF CONTENTS

INTRODUCTION 1
1 - HOSES 4

CONTENTS
WATER, AIR & STEAM HOSES 7
ANTI-STATIC FUEL HOSES 25
CHEMICAL HOSES 47
FOOD & BEVERAGE HOSES 55
ABRASIVE HOSES 63

1
2 - FITTINGS 73

3 - ASSEMBLY MACHINES 74

4 - APPENDICES 76
SELECTING THE CORRECT HOSE 76
FLUID COMPATIBILITY CHART 77
CLEANING & SANITIZATION OF FOOD GRADE HOSES 88
BRANDING OF HOSES 89
STORAGE OF HOSES AND ASSEMBLIES 89
HANDLING AND USAGE OF HOSES AND ASSEMBLIES 90
 WHY CHOOSE MANULI INDUSTRIAL HOSES?

Manuli Hydraulics has a long and enviable history in the field of fluid power connector
solutions. Our hydraulic connectors are widely used by many of the most well known OEMs
around the world, due to their exceptionally high quality, reliability and performance.
INTRO

The Industrial Hose solutions offered in this document form a new chapter in the company’s
history, where we have taken decades of experience producing some of the most robust and
reliable high-pressure rubber hoses and transferred that expertise to the development of
hoses for industrial conveying applications.
The Manuli Industrial Hose range is not just a simple addition to the already extensive range of Manuli rubber
2

hoses, but is a product sector in and of itself. We offer several different hose types dedicated to conveying
specific fluids and materials, and each and every hose is tailored to suit the challenges of that particular
application.
Our in-house team of material engineers have developed some of the most advanced synthetic rubber
compounds available to modern science, while our team of design engineers have ensured that the hose
structures provide the perfect blend of pressure resistance, flexibility and mechanical strength required for
each specific application.
Some other considerations which make Manuli Industrial Hoses the perfect choice are:
• All Manuli industrial hoses are compatible with a wide range of third-party fitting solutions as well as our
own dedicated range of fittings
• Manuli industrial hoses are available in lengths up to 60m
• Our UK based assembly plant can provide complete assemblies alongside all the necessary pressure
and seal test documentation

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
CUSTOMISED SOLUTIONS

Industrial applications are so many and varied

that it would be almost impossible to develop
industrialised products for every possible
situation. However, at Manuli Hydraulics we

INTRO
are fully prepared to meet any application
challenge that our OEM partners can present
us with, which is why we offer our Bespoke
Solutions Program (BSP).

3
The BSP is just one way that Manuli Hydraulics provides an added value service to our OEM partners.
Manuli Hydraulics is structured in such a way that we can tailor solutions to the specific requirements of our
customers in a way that our competitors never could. We are small enough to be agile and responsive, yet
large enough to have the design and manufacturing capabilities to produce bespoke products at a reasonable
price. Our Design and Production Technology Team are dedicated to working directly with our customers, to
ensure that their precise needs are met.
Used by some of the largest and most respected OEMs around the world, the Manuli Bespoke Solutions
Program means that you never have to compromise on your conveyance system design again.
 INDUSTRIAL HOSES - INDEX BY APPLICATION

HOSE MATERIAL TYPE HOSE

APPLICATION RANGE HOSE PAGE
TYPE TUBE COVER STRUCTURE

MULTISERVICE/12 D WATER & AIR HOSE SBR SBR HIGH TENSILE SYNTHETIC CORD 9

HIGH TENSILE SYNTHETIC CORD & STEEL

MULTISERVICE/12 SD WATER & AIR HOSE SBR SBR
HELIX BODY WIRE 10
WATER & AIR MULTISERVICE
WATER & AIR HOSE,
MULTISERVICE/21 D SBR SBR HIGH TENSILE SYNTHETIC CORD 11
HOSES

HEAVY DUTY

WATER & AIR HOSE, HIGH TENSILE SYNTHETIC CORD & STEEL
MULTISERVICE/21 SD
HEAVY DUTY
SBR SBR
HELIX BODY WIRE 12

WATER HOSE FOR SNOW

GLACIER/60
GUNS
EPDM EPDM HIGH TENSILE SYNTHETIC CORD 13
GLACIER
WATER HOSE FOR SNOW
GLACIER/100
GUNS
EPDM EPDM HIGH TENSILE STEEL WIRE SPIRALS 14
WATER
4

LAYFLAT HOSE FOR GEN-

WATERFLAT WATERFLAT 5/10
ERAL PURPOSE WATER
SBR SBR HIGH TENSILE SYNTHETIC CORD 15

ABS APPROVED FIRE HIGH TENSILE STEEL WIRE SPIRALS;

FIREX FIREX
SUPPRESSION HOSE
CR CR
GLASS-FIBRE 16

AIR COMPRESSOR HOSE, TWO WIRE BRAIDS OR MULTIPLE PIECES OF

AIRSERVICE
HEAVY DUTY
SBR NBR/PVC
HIGH TENSILE STEEL WIRE SPIRALS 17
AIRSERVICE
COMPRESSED WATER & AIR COMPRES-
AIRSERVICE/27
SOR HOSE, HEAVY DUTY
SBR NBR/PVC HIGH TENSILE TEXTILE LAYERS 18
AIR
HEAVY DUTY PNEUMATIC
AIRKING AIRKING/40
TOOLS
EPM EPDM HIGH TENSILE SYNTHETIC CORD 19

STEAMER/18 STEAM & VAPOUR HOSE EPM EPM HIGH TENSILE STEEL WIRE SPIRALS 20
STEAMER
STEAMER/18 OR STEAM & VAPOUR HOSE EPM EPM HIGH TENSILE STEEL WIRE SPIRALS 21

STEAM & STEAM & VAPOUR HOSE

STEAMSAFE STEAMSAFE/7 FOR FOOD INDUSTRY EPM EPDM HIGH TENSILE SYNTHETIC CORD 22
HOT WATER CLEANING

INDUSTRY & GENERAL HIGH TENSILE SYNTHETIC CORD & STEEL

COOLER COOLER/5
PURPOSE COOLING HOSE
VMQ VMQ
HELIX BODY WIRE 23

HIGH FLEXIBILITY WATER HIGH TENSILE SYNTHETIC CORD & STEEL

COOLSERVICE COOLSERVICE/G
GLYCOL COOLING HOSE
EPDM EPDM
HELIX BODY WIRE 24
HIGH TENSILE SYNTHETIC CORD, STEEL
FUEL HOSE WITH HIGH
FUELSERVICE/5 SDC
FLEXIBILITY
NBR CR HELIX BODY WIRE & COPPER GROUNDING 27
WIRES

HIGH TENSILE SYNTHETIC CORD & COPPER

FUELSERVICE/10 D FUEL & OIL HOSE NBR SBR
GROUNDING WIRES 28
HIGH TENSILE SYNTHETIC CORD, STEEL
FUELSERVICE/10 SD FUEL & OIL HOSE NBR SBR HELIX BODY WIRE & COPPER GROUNDING 29
WIRES
HIGH TENSILE SYNTHETIC CORD, STEEL
FUELSERVICE/10 R4 FUEL & OIL HOSE NBR SBR HELIX BODY WIRE & COPPER GROUNDING 30
WIRES

EN 12115 FUEL & MINERAL HIGH TENSILE SYNTHETIC CORD & COPPER
FUELSERVICE/16 D
OIL HOSE
NBR CR
GROUNDING WIRES 31
HIGH TENSILE SYNTHETIC CORD, STEEL
EN 12115 FUEL & MINERAL
FUELSERVICE FUELSERVICE/16 SD
OIL HOSE
NBR CR HELIX BODY WIRE & COPPER GROUNDING 32
WIRES
EN 1825 TYPE B FUEL
FUELSERVICE/20 D HIGH TENSILE SYNTHETIC CORD & COPPER
FUEL EN 1825-B
HOSE FOR AIRCRAFT NBR CR
GROUNDING WIRES 33
REFUELLING
EN 1825 TYPE C FUEL
FUELSERVICE/20 D
EN 1825-C
HOSE FOR AIRCRAFT NBR CR HIGH TENSILE SYNTHETIC CORD 34
REFUELLING
EN 1825 TYPE E FUEL HIGH TENSILE SYNTHETIC CORD, STEEL
FUELSERVICE/20 D
EN 1825-E
HOSE FOR AIRCRAFT NBR CR HELIX BODY WIRE & COPPER GROUNDING 35
REFUELLING WIRES

FUEL & OIL HOSE, HEAVY HIGH TENSILE SYNTHETIC CORD & COPPER
FUELSERVICE/21 D
DUTY
NBR SBR
GROUNDING WIRES 36
HIGH TENSILE SYNTHETIC CORD, STEEL
FUEL & OIL HOSE, HEAVY
FUELSERVICE/SD
DUTY
NBR SBR HELIX BODY WIRE & COPPER GROUNDING 37
WIRES

EN 1360 TYPE 1 FUEL & HIGH TENSILE SYNTHETIC CORD & COPPER
FUELDISPENSER/D
MINERAL OIL HOSE
NBR CR
GROUNDING WIRES 38
FUELDISPENSER HIGH TENSILE SYNTHETIC CORD, STEEL
EN 1360 TYPE 2 FUEL &
FUELDISPENSER/SD
MINERAL OIL HOSE
NBR CR HELIX BODY WIRE & COPPER GROUNDING 39
WIRES

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
INDUSTRIAL HOSES - INDEX BY APPLICATION

HOSE MATERIAL TYPE HOSE

APPLICATION RANGE HOSE PAGE
TYPE TUBE COVER STRUCTURE

EN 1761 TYPE D HOSE HIGH TENSILE SYNTHETIC CORD & COPPER

FUELTRUCK/16 D
FOR TRUCK SYSTEMS
NBR CR
GROUNDING WIRES 40
FUELTRUCK HIGH TENSILE SYNTHETIC CORD, STEEL
EN 1761 TYPE SD HOSE
FUELTRUCK/16 SD
FOR TRUCK SYSTEMS
NBR CR HELIX BODY WIRE & COPPER GROUNDING 41
WIRES
FUEL HIGH TENSILE SYNTHETIC CORD, STEEL
FUEL DELIVERY WITH
FUELFLEX FUELFLEX/17 SDC NBR CR HELIX BODY WIRE & COPPER GROUNDING 42

HOSES
HIGH FLEXIBILITY
WIRES
FUEL DELIVERY WITH HIGH TENSILE SYNTHETIC CORD,
FUELTANKER FUELTANKER/10 SD HIGH ABRASION RE- NBR NBR/PVC THERMOPLASTIC OUTER HELIX & COPPER 43
SISTANCE GROUNDING WIRES

DRILLING MUDS, OIL & HIGH TENSILE SYNTHETIC CORD & COPPER
FRACKING MUDSERVICE MUDSERVICE/28 D
ABRASIVE SLURRIES
X-NBR CR
GROUNDING WIRES 44

PROGAS LPG D LPG HOSE NBR CR HIGH TENSILE SYNTHETIC CORD 45

LPG PROGAS

5
HIGH TENSILE SYNTHETIC CORD & STEEL
PROGAS LPG SD LPG HOSE NBR CR
HELIX BODY WIRE 46

FKM HOSE FOR AGGRES-

CHEMKING/10 D
SIVE CHEMICALS
FKM CR HIGH TENSILE SYNTHETIC CORD 49

FKM HOSE FOR AGGRES- HIGH TENSILE SYNTHETIC CORD & STEEL
CHEMKING/10 SD
SIVE CHEMICALS
FKM CR
HELIX BODY WIRE 50
EN 12115 ANTI-STATIC HIGH TENSILE SYNTHETIC CORD, STEEL
CHEMICAL CHEMKING CHEMKING/16 SDE EPDM HOSE FOR CHEMI- EPDM CR HELIX BODY WIRE & COPPER GROUNDING 51
CAL PRODUCTS WIRES
EN 12115 ANTI-STATIC HIGH TENSILE SYNTHETIC CORD, STEEL
CHEMKING/16 SDA UHMWPE HOSE FOR UHMWPE CR HELIX BODY WIRE & COPPER GROUNDING 52
CHEMICAL PRODUCTS WIRES
HIGH TENSILE SYNTHETIC CORD, STEEL
EN 12115 FEP HOSE FOR
CHEMKING/16 SD
CHEMICAL PRODUCTS
FEP CR HELIX BODY WIRE & COPPER GROUNDING 53
WIRES

BEER, WINE & ALCOHOL HIGH TENSILE SYNTHETIC CORD & STEEL
BREWERS BREWERS/12 SD
HOSE
BIIR EPDM
HELIX BODY WIRE 57

BEER, WINE & ALCOHOL HIGH TENSILE SYNTHETIC CORD & STEEL
BREWERS BREWERS/12 SDC
HOSE
BIIR EPDM
HELIX BODY WIRE 58
LIQUID FOOD
& BEVERAGE MILK & FATTY FOODS HIGH TENSILE SYNTHETIC CORD & STEEL
MILKYWAY MILKYWAY/ 10 SD
HOSE
NBR NBR
HELIX BODY WIRE 59

MULTI-PURPOSE LIQUID HIGH TENSILE SYNTHETIC CORD & 2 STEEL

MULTIFOOD MULTIFOOD/10 SD
FOOD HOSE
EPDM EPDM
HELIX BODY WIRES 60

LAYFLAT HOSE FOR DRY HIGH TENSILE SYNTHETIC CORD & COPPER
DRY FOOD ABRAFOOD ABRAFOOD/10
FOODS
NR CR
GROUNDING WIRES 61
LAYFLAT HOSE FOR
ABRADRY ABRADRY ABRASIVE DRY MATE- NR/SBR SBR/NR/PVC HIGH TENSILE SYNTHETIC CORD 65
ABRASIVE RIALS
SOLIDS SANDBLASTING & ABRA-
SANDSERVICE SANDSERVICE/21 D/4
SIVE FLUID HOSE
NR/SBR NR/SBR HIGH TENSILE SYNTHETIC CORD 66

ABRASIVE FLUID HOSE, HIGH TENSILE SYNTHETIC CORD,COPPER

ABRASERVICE/10 D
HEAVY DUTY
NR/SBR NR/SBR
GROUNDING WIRES 67
HIGH TENSILE SYNTHETIC CORD, STEEL
ABRASIVE FLUID HOSE,
ABRASERVICE/10 SD
HEAVY DUTY
NR/SBR NR/SBR HELIX BODY WIRE & COPPER GROUNDING 68
WIRES

ABRASIVE REVERSE CYCLE DRILL- HIGH TENSILE SYNTHETIC CORD & STEEL
ABRASERVICE ABRASERVICE/35 SD
ING HOSE
NR/SBR NR/SBR
HELIX BODY WIRE 69
FLUIDS
PLASTER SPRAYING
ABRASERVICE/40 D
HOSE
NR/SBR NR/SBR HIGH TENSILE SYNTHETIC CORD 70

HIGH-PRESSURE CON-
ABRASERVICE/100 D
CRETE PUMPING HOSE
NR/SBR NR/SBR HIGH TENSILE STEEL CORD 71
 INDUSTRIAL HOSES - INDEX BY WORKING PRESSURE

DN 6 8 10 12 16 19 22 25 31 35 38 40 45 51 63 76 89 90 102 127 152 203 254 305 457 609

1/ ” 5/ ” 3/ ” 1/ ” 5/ ” 3/ ” 7/ ”
INCH 4 16 8 2 8 4 8 1” 11/4” 13/8” 11/2” 19/16” 13/4” 2” 21/2” 3” 31/2” 335/64” 4” 5” 6” 8” 10” 12” 18” 24”

ABRADRY 6 4 4 4 4

ABRAFOOD/10 10 10

ABRASERVICE/10 D 10 10

ABRASERVICE/10 SD 10 10 10 10 10

ABRASERVICE/35 SD 35 35 35
HOSES

ABRASERVICE/40 D 40 40 40 40 40 40

ABRASERVICE/100 D 100 100 100 100 100

AIRKING/40 40 40 40

AIRSERVICE 45 45 45 45 45 45 45 35

AIRSERVICE/27 27 27 27 27 27 27 27

BREWERS/12 SD 12 12 12 12 12 12 12 12

BREWERS/12 SDC 12 12 12 12 12 12
6

CHEMKING/10 D 10 10 10 10 10 10 10 10 10 10

CHEMKING/10 SD 10 10 10 10 10 10 10 10

CHEMKING/16 SD 16 16 16 16 16 16

CHEMKING/16 SDA 16 16 16 16 16 16 16 16

CHEMKING/16 SDE 16 16 16 16 16 16 16 16

COOLER/5 5 5 5 5 5 5 5 5

COOLSERVICE 5 5 5 5 5 5

FIREX 20 20 20 20 20

FUELDISPENSER/D 16 16 16 16 16 16

FUELDISPENSER/SD 16 16 16 16

FUELFLEX/17 SDC 17 17 17 17 17 17 17 17 17

FUELSERVICE/5 SDC 5 5 5 5 5 5 5 5

FUELSERVICE/10 D 10 10 10 10 10 10 10

FUELSERVICE/10 SD 10 10 10 10 10 10 10 10 10 10 10

FUELSERVICE/10 R4 21 17 14 11 10 10 10 10 10 10

FUELSERVICE/16 D 16 16 16 16 16 16 16 16

FUELSERVICE/16 SD 16 16 16 16 16 16 16 16

FUELSERVICE/20 D EN 1825-B 20 20 20 20 20 20 20 20

FUELSERVICE/20 D EN 1825-C 20 20 20 20 20 20 20 20

FUELSERVICE/20 D EN 1825-E 20 20 20 20 20 20 20 20

FUELSERVICE/21 D 21 21 21 21 21 21 21 21 21 21

FUELSERVICE/21 SD 21 21

FUELTANKER/10 SD 10 10 10 10

FUELTRUCK/16 D 16 16 16 16 16 16 16 16 16 16

FUELTRUCK/16 SD 16 16 16 16 16 16 16 16 16 16

GLACIER/100 100 100 100

GLACIER/60 60 60 60

MILKYWAY/ 10 SD 10 10 10 10 10 10 10 10

MUDSERVICE/28 D 28 28 28 28

MULTIFOOD/10 SD 10 10 10 10 10

MULTISERVICE/12 D 12 12 12 12 12 12 12 12

MULTISERVICE/12 SD 12 12 12 12 12 12 12 12 12

MULTISERVICE/21 D 21 21 21 21 21 21 21 21

MULTISERVICE/21 SD 21 21 21 21

PROGAS LPG D 25 25 25 25 25 25 25 25 25 25

PROGAS LPG SD 25 25 25 25 25 25 25 25 25 25

SANDSERVICE/21 D 21 21 21 21 21

STEAMER/18 18 18 18 18 18 18 18 18 18 18

STEAMER/18 OR 18 18 18 18 18 18 18 18 18 18

STEAMSAFE/7 7 7 7 7 7

WATERFLAT 5/10 10 10 10 10 10 10 10 5 5

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
 WATER, AIR & STEAM
HOSES

Manuli’s range of water, air and steam hoses comprises over 15

individual references designed to cover the majority of common
uses for these hoses. From mixed fluid hoses for general
purpose use, to hoses specifically designed for a single dedicated
application, this family of hoses casts a wide net.
 HOSE HOSE
APPLICATION RANGE HOSE PAGE
TYPE STRUCTURE

MULTISERVICE/12 D WATER & AIR HOSE HIGH TENSILE SYNTHETIC CORD 9

HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY

MULTISERVICE/12 SD WATER & AIR HOSE
WIRE 10
WATER & AIR MULTISERVICE
WATER & AIR HOSE, HEAVY
MULTISERVICE/21 D
DUTY
HIGH TENSILE SYNTHETIC CORD 11

WATER & AIR HOSE, HEAVY HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
MULTISERVICE/21 SD
DUTY WIRE 12

GLACIER/60 WATER HOSE FOR SNOW GUNS HIGH TENSILE SYNTHETIC CORD 13
GLACIER
GLACIER/100 WATER HOSE FOR SNOW GUNS HIGH TENSILE STEEL WIRE SPIRALS 14
WATER
LAYFLAT HOSE FOR GENERAL
WATERFLAT WATERFLAT 5/10
PURPOSE WATER
HIGH TENSILE SYNTHETIC CORD 15

ABS APPROVED FIRE

FIREX FIREX
SUPPRESSION HOSE
HIGH TENSILE STEEL WIRE SPIRALS; GLASS-FIBRE 16

AIR COMPRESSOR HOSE, TWO WIRE BRAIDS OR MULTIPLE PIECES OF HIGH

AIRSERVICE
HEAVY DUTY TENSILE STEEL WIRE SPIRALS 17
AIRSERVICE
COMPRESSED WATER & AIR COMPRESSOR
AIRSERVICE/27
HOSE, HEAVY DUTY
HIGH TENSILE TEXTILE LAYERS 18
AIR
HEAVY DUTY PNEUMATIC
AIRKING AIRKING/40
TOOLS
HIGH TENSILE SYNTHETIC CORD 19

STEAMER/18 STEAM & VAPOUR HOSE HIGH TENSILE STEEL WIRE SPIRALS 20
STEAMER
STEAMER/18 OR STEAM & VAPOUR HOSE HIGH TENSILE STEEL WIRE SPIRALS 21

STEAM & STEAM & VAPOUR HOSE FOR

STEAMSAFE STEAMSAFE/7
FOOD INDUSTRY CLEANING
HIGH TENSILE SYNTHETIC CORD 22
HOT WATER
INDUSTRY & GENERAL HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
COOLER COOLER/5
PURPOSE COOLING HOSE WIRE 23

HIGH FLEXIBILITY WATER HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
COOLSERVICE COOLSERVICE/G
GLYCOL COOLING HOSE WIRE 24
WATER, AIR & STEAM HOSES

MULTISERVICE/12 D
WATER & AIR HOSE

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80007013* 12 1/2” 20.6 0.81 12 170 36 520 90 3.54 206 0.14 SR+D08000 series
H80007019* 19 3/4” 31.0 1.22 12 170 36 520 110 4.33 453 0.30 SR+D08000 series

9
H80007025* 25 1” 37.4 1.47 12 170 36 520 135 5.31 565 0.38 SR+D08000 series
H80007031* 31 1.1/4” 44.0 1.73 12 170 36 520 165 6.50 720 0.48 SR+D08000 series
H80007038* 38 1.1/2” 52.1 2.05 12 170 36 520 205 8.07 773 0.52 SR+D08000 series
H80007051* 51 2” 65.3 2.57 12 170 36 520 260 10.24 1,026 0.69 SR+D08000 series
H80007063* 63 2.1/2” 78.5 3.09 12 170 36 520 360 14.17 1,520 1.02 SR+D08000 series
H80007076* 76 3” 94.1 3.70 12 170 36 520 470 18.50 1,849 1.24 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-35 °C, -31 °F
• Softwall delivery structure 80 °C, 176 °F
• Highly robust hose structure
• Long lasting in severe applications
TUBE
• Long length assemblies available - Max length: 61m
Black, smooth, synthetic SBR rubber

REINFORCEMENT
APPLICATIONS & FLUIDS High tensile synthetic cord

COVER
• Water or compressed air, to be used in mining,
construction, shipyards, etc. Black synthetic SBR rubber, long lasting, weathering and ozone
resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 WATER, AIR & STEAM HOSES

MULTISERVICE/12 SD
WATER & AIR HOSE

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80008019* 19 3/4” 28.1 1.11 12 170 36 520 100 3.94 384 0.26 SR+D08000 series
H80008025* 25 1” 34.5 1.36 12 170 36 520 125 4.92 482 0.32 SR+D08000 series
10

H80008031* 31 1.1/4” 41.1 1.62 12 170 36 520 150 5.91 605 0.41 SR+D08000 series
H80008038* 38 1.1/2” 47.5 1.87 12 170 36 520 190 7.48 701 0.47 SR+D08000 series
H80008051* 51 2” 61.3 2.41 12 170 36 520 250 9.84 1,122 0.75 SR+D08000 series
H80008063* 63 2.1/2” 74.4 2.93 12 170 36 520 350 13.78 1,600 1.07 SR+D08000 series
H80008076* 76 3” 87.5 3.44 12 170 36 520 450 17.72 2,203 1.48 SR+D08000 series
H80008102* 102 4” 114.3 4.50 12 170 36 520 500 19.69 3,330 2.24 SR+D08000 series
H80008152* 152 6” 170.0 6.69 12 170 36 520 760 29.92 6,600 4.48 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -35 °C, -31 °F
• Compact, lightweight and flexible 80 °C, 176 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m
Black, smooth, synthetic SBR rubber
(DN19 - DN102); 30.5m (DN152)
REINFORCEMENT
APPLICATIONS & FLUIDS High tensile synthetic cord and steel helix body wire

COVER
• Water or compressed air, to be used in mining,
construction, shipyards, etc. Black synthetic SBR rubber, long lasting, weathering and ozone
resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES

MULTISERVICE/21 D
WATER & AIR HOSE, HEAVY DUTY

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80009013* 12 1/2” 20.6 0.81 21 300 63 910 90 3.54 215 0.14 SR+D08000 series
H80009019* 19 3/4” 31.6 1.24 21 300 63 910 110 4.33 457 0.31 SR+D08000 series

11
H80009025* 25 1” 38.2 1.50 21 300 63 910 135 5.31 519 0.35 SR+D08000 series
H80009031* 31 1.1/4” 45.0 1.77 21 300 63 910 165 6.50 659 0.44 SR+D08000 series
H80009038* 38 1.1/2” 51.6 2.03 21 300 63 910 205 8.07 928 0.62 SR+D08000 series
H80009051* 51 2” 65.0 2.56 21 300 63 910 260 10.24 1,224 0.82 SR+D08000 series
H80009063* 63 2.1/2” 78.9 3.11 21 300 63 910 360 14.17 1,583 1.06 SR+D08000 series
H80009076* 76 3” 94.0 3.70 21 300 63 910 470 18.50 1,849 1.24 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-35 °C, -31 °F
• Softwall delivery structure 80 °C, 176 °F
• Highly robust heavy duty hose structure
• Long lasting in severe applications
TUBE
• Long length assemblies available - Max length: 61m
Black, smooth, synthetic SBR rubber

REINFORCEMENT
APPLICATIONS & FLUIDS High tensile synthetic cord

COVER
• Water or compressed air with oil traces, to be used in
heavy duty mining, construction, shipyards, etc. Black synthetic SBR rubber, long lasting, weathering and ozone
resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 WATER, AIR & STEAM HOSES

MULTISERVICE/21 SD
WATER & AIR HOSE, HEAVY DUTY

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80022051* 51 2” 61.3 2.41 21 300 63 910 250 9.84 1,130 0.76 SR+D08000 series
H80022076* 76 3” 88.3 3.48 21 300 63 910 450 17.72 2,285 1.53 SR+D08000 series
12

H80022102* 102 4” 115.1 4.53 21 300 63 910 500 19.69 3,378 2.27 SR+D08000 series
H80022152* 152 6” 168.0 6.61 21 300 63 910 760 29.92 6,800 4.57 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -35 °C, -31 °F
• Compact, lightweight and flexible 80 °C, 176 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m
Black, smooth, synthetic SBR rubber
(DN51 - DN102); 30.5m (DN152)
REINFORCEMENT
APPLICATIONS & FLUIDS High tensile synthetic cord and steel helix body wire

COVER
• Water or compressed air with oil traces, to be used in
heavy duty mining, construction, shipyards, etc. Black synthetic SBR rubber, long lasting, weathering and ozone
resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES

GLACIER/60
WATER HOSE FOR SNOW GUNS

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80054025* 25 1" 39.0 1.54 60 900 180 2,700 100 3.94 810 0.54 SR+D08000 series
H80054031* 31 1.1/4" 46.0 1.81 60 900 180 2,700 128 5.04 990 0.66 SR+D08000 series

13
H80054038* 38 1.1/2" 52.0 2.05 60 900 180 2,700 152 5.98 1,140 0.76 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall delivery structure
120 °C, 248 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black EPDM rubber

REINFORCEMENT

High tensile synthetic cord

APPLICATIONS & FLUIDS
COVER
• Delivery hose for water in snow gun equipment
Blue synthetic EPDM rubber, ozone, abrasion and weathering
resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 WATER, AIR & STEAM HOSES

GLACIER/100
WATER HOSE FOR SNOW GUNS

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80055025* 25 1" 40.0 1.57 100 1,500 250 3,750 110 4.33 1,300 0.87 SR+D08000 series
H80055031* 31 1.1/4" 47.0 1.85 100 1,500 250 3,750 140 5.51 1,740 1.16 SR+D08000 series
14

H80055038* 38 1.1/2" 54.0 2.13 100 1,500 250 3,750 170 6.69 2,250 1.50 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall delivery structure
120 °C, 248 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black EPDM rubber

REINFORCEMENT

High tensile steel spirals

APPLICATIONS & FLUIDS
COVER
• Delivery hose for water in snow gun equipment
Blue synthetic EPDM rubber, ozone, abrasion and weathering
resistant

APPLICABLE SPECS
Manuli design, safety factor 2.5:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES

WATERFLAT 5/10
LAYFLAT DELIVERY HOSE FOR
GENERAL PURPOSE WATER

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80056051* 51 2" 57.0 2.24 10 150 30 450 - - 580 0.39 MARKET FITTINGS
H80056076* 76 3" 83.0 3.27 10 150 30 450 - - 1,180 0.79 MARKET FITTINGS

15
H80056102* 102 4" 109.0 4.29 10 150 30 450 - - 1,570 1.05 MARKET FITTINGS
H80056152* 152 6" 160.0 6.30 10 150 30 450 - - 2,650 1.77 MARKET FITTINGS
H80056203* 203 8" 215.0 8.46 10 150 30 450 - - 5,320 3.55 MARKET FITTINGS
H80056254* 254 10" 267.0 10.51 10 150 30 450 - - 7,180 4.79 MARKET FITTINGS
H80056305* 305 12' 319.0 12.56 10 150 30 450 - - 9,260 6.17 MARKET FITTINGS
H80056457* 457 18" 476.0 18.74 5 75 15 225 - - 18,400 12.27 MARKET FITTINGS
H80056609* 609 24" 635.0 25.00 5 75 15 225 - - 31,200 20.80 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Layflat delivery hose 80 °C, 176 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
TUBE
applications
• Max length: 61m (DN51 - DN102); 30.5m (DN152 - Black SBR rubber
DN203); 12m (DN254 - DN609)
REINFORCEMENT
APPLICATIONS & FLUIDS High tensile synthetic cord

• Water, liquid fertilizer and non-corrosive inert fluids for

COVER
irrigation
• Submersible pumps and general industrial applications Black synthetic SBR rubber, abrasion and weathering resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 WATER, AIR & STEAM HOSES

FIREX
FIRE SUPPRESSION HOSE, ABS APPROVED
FOR OFFSHORE

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80016051* 51 2" 80.0 3.15 20 300 100 1,500 420 16.54 4,900 3.27 MARKET FITTINGS
H80016076* 76 3" 108.0 4.25 20 300 100 1,500 535 21.06 7,500 5.00 MARKET FITTINGS
16

H80016102* 102 4" 134.0 5.28 20 300 100 1,500 640 25.20 11,000 7.33 MARKET FITTINGS
H80016127* 127 5" 160.0 6.30 20 300 100 1,500 1,100 43.31 13,400 8.93 MARKET FITTINGS
H80016152* 152 6" 185.0 7.28 20 300 100 1,500 1,210 47.64 15,700 10.47 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall delivery structure 100 °C, 212 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m
Black CR rubber

REINFORCEMENT

High tensile steel spirals

APPLICATIONS & FLUIDS
COVER
• Delivery hose for fire-water deluge hose applications on
Glass-fibre layers, co-vulcanized with an external layer of red CR
oil rigs
rubber; fire, sea-water, abrasion and ozone resistant (black cover
available on request)

APPLICABLE SPECS

EN 15540:1999 (800°C X 30’) / ABS approval (required)

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES

AIRSERVICE
AIR COMPRESSOR HOSE, HEAVY DUTY

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80010019* 19 3/4” 31.4 1.24 45 650 180 2610 95 3.74 780 0.52 SR+D08000 series
H80010025* 25 1” 37.8 1.49 45 650 180 2610 125 4.92 1,014 0.68 SR+D08000 series

17
H80010031* 31 1.1/4” 44.8 1.76 45 650 180 2610 160 6.30 1,283 0.86 SR+D08000 series
H80010038* 38 1.1/2” 51.2 2.02 45 650 180 2610 190 7.48 1,534 1.03 SR+D08000 series
H80010051* 51 2” 65.0 2.56 45 650 180 2610 255 10.04 2,277 1.53 SR+D08000 series
H80010063* 63 2.1/2” 79.4 3.13 35 500 140 2030 315 12.40 2,915 1.95 SR+D08000 series
H80010076* 76 3” 94.2 3.71 35 500 140 2030 380 14.96 4,068 2.73 SR+D08000 series
H80010102* 102 4” 122.0 4.80 35 500 140 2030 510 20.08 5,800 3.85 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Heavy duty softwall delivery structure 80 °C, 176 °F
• Robust hose structure
• Long lasting in severe applications
TUBE
• Long length assemblies available - Max length: 61m
Black, smooth, synthetic SBR rubber

REINFORCEMENT
APPLICATIONS & FLUIDS Two wire braids or multiple plies of high tensile steel wire spirals

COVER
• High pressure compressed air and oil traces,to be used
Yellow synthetic NBR/PVC rubber, long lasting, weathering and
in mining, construction, etc. Typically used in compressed ozone resistant
air systems and power transmission.
APPLICABLE SPECS
Manuli design, safety factor 4:1 (DN19 to DN51); 3:1 (DN63 to
DN76)

STANDARD PACKAGING
Coil
 WATER, AIR & STEAM HOSES

AIRSERVICE/27
WATER AND AIR COMPRESSOR HOSE,
HEAVY DUTY

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80017013* 12 1/2” 20.6 0.81 27 400 81 1175 100 3.93 246 0.16 SR+D08000 series
H80017019* 19 3/4” 30.3 1.19 27 400 81 1175 150 5.90 466 0.31 SR+D08000 series
18

H80017025* 25 1” 36.8 1.45 27 400 81 1175 185 7.28 589 0.39 SR+D08000 series
H80017031* 31 1.1/4” 43.3 1.70 27 400 81 1175 320 12.59 749 0.50 SR+D08000 series
H80017038* 38 1.1/2” 48.9 1.93 27 400 81 1175 380 14.96 898 0.60 SR+D08000 series
H80017051* 51 2” 62.1 2.44 27 400 81 1175 500 19.68 1,195 0.80 SR+D08000 series
H80017076* 76 3” 88.5 3.48 27 400 81 1175 750 29.52 1,986 1.33 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-35 °C, -31 °F
• Softwall delivery structure 80 °C, 176 °F
• Robust heavy duty hose structure
• Long lasting in severe applications
TUBE
• Long length assemblies available - Max length: 61m
Black, synthetic SBR rubber, resistant to oil traces

REINFORCEMENT
APPLICATIONS & FLUIDS High tensile textile layers

COVER
• Water or compressed air with oil traces, to be used in
mining, construction, etc. Yellow synthetic NBR/PVC rubber, long lasting, weathering and
ozone resistant.

APPLICABLE SPECS
Manuli design: safety factor 3:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES

AIRKING/40
HEAVY-DUTY PNEUMATIC TOOLS IN ROAD
CONSTRUCTION, RAILWAYS, TUNNELLING,
MINING ETC.

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80053051* 51 2" 70.0 2.75 40 600 120 1800 500 19.69 1,930 1.71 SR+D08000 series
H80053076* 76 3" 100.0 3.94 40 600 120 1800 740 29.13 3,750 3.32 SR+D08000 series

19
H80053102* 102 4" 128.0 5.05 40 600 120 1800 970 38.19 5,120 4.53 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall delivery structure
160 °C, 320 °F
• Compact and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black EPM rubber

REINFORCEMENT

High tensile synthetic cord

APPLICATIONS & FLUIDS
• Delivery hose for high temperature compressed COVER
air suitable for heavy duty pneumatic tools in road
Black EPDM rubber, abrasion and weathering resistant (yellow
construction, railway works, tunnelling and mining
cover available on request)

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 WATER, AIR & STEAM HOSES

STEAMER/18
STEAM & VAPOUR HOSE

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80037012* 12 1/2" 25.0 0.98 18 270 180 2,700 120 4.72 530 0.35 MARKET FITTINGS
H80037016* 16 5/8" 30.0 1.18 18 270 180 2,700 155 6.10 750 0.50 MARKET FITTINGS
20

H80037019* 19 3/4" 33.0 1.30 18 270 180 2,700 185 7.28 780 0.52 MARKET FITTINGS
H80037025* 25 1" 40.0 1.57 18 270 180 2,700 240 9.45 1,030 0.69 MARKET FITTINGS
H80037031* 31 1.1/4" 48.0 1.89 18 270 180 2,700 330 12.99 1,410 0.94 MARKET FITTINGS
H80037038* 38 1.1/2" 54.0 2.13 18 270 180 2,700 390 15.35 1,780 1.19 MARKET FITTINGS
H80037051* 51 2" 69.0 2.72 18 270 180 2,700 520 20.47 2,580 1.72 MARKET FITTINGS
H80037063* 63 2.1/2" 81.0 3.19 18 270 180 2,700 640 25.20 3,160 2.11 MARKET FITTINGS
H80037076* 76 3" 94.0 3.70 18 270 180 2,700 745 29.33 4,020 2.68 MARKET FITTINGS
H80037102* 102 4" 122.0 4.80 18 270 180 2,700 990 38.98 6,220 4.15 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall delivery structure
210 °C, 410 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 40m Black EPM rubber

REINFORCEMENT

High tensile steel reinforcement

APPLICATIONS & FLUIDS
• Delivery of high pressure saturated steam
COVER
• Suitable for steam cleaning of tanks and pipelines in the
Red, synthetic EPM pin-pricked rubber, ozone, abrasion and
petrochemical industry weathering resistant

APPLICABLE SPECS
ISO 6134 - Type 2 Class A Grade M

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES

STEAMER/18 OR
STEAM & VAPOUR HOSE

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80038012* 12 1/2" 25.0 0.98 18 270 180 2,700 120 4.72 530 0.35 MARKET FITTINGS
H80038016* 16 5/8" 30.0 1.18 18 270 180 2,700 155 6.10 750 0.50 MARKET FITTINGS

21
H80038019* 19 3/4" 33.0 1.30 18 270 180 2,700 185 7.28 780 0.52 MARKET FITTINGS
H80038025* 25 1" 40.0 1.57 18 270 180 2,700 240 9.45 1,030 0.69 MARKET FITTINGS
H80038031* 31 1.1/4" 48.0 1.89 18 270 180 2,700 330 12.99 1,410 0.94 MARKET FITTINGS
H80038038* 38 1.1/2" 54.0 2.13 18 270 180 2,700 390 15.35 1,780 1.19 MARKET FITTINGS
H80038051* 51 2" 69.0 2.72 18 270 180 2,700 520 20.47 2,580 1.72 MARKET FITTINGS
H80038063* 63 2.1/2" 81.0 3.19 18 270 180 2,700 640 25.20 3,160 2.11 MARKET FITTINGS
H80038076* 76 3" 94.0 3.70 18 270 180 2,700 745 29.33 4,020 2.68 MARKET FITTINGS
H80038102* 102 4" 122.0 4.80 18 270 180 2,700 990 38.98 6,220 4.15 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall delivery structure
210 °C, 410 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 40m Black EPM rubber

REINFORCEMENT

High tensile steel reinforcement

APPLICATIONS & FLUIDS
• Delivery of high pressure saturated steam
COVER
• Suitable for steam cleaning of tanks and pipelines in the
Red, synthetic EPM pin-pricked rubber, oil, ozone, abrasion and
petrochemical industry weathering resistant

APPLICABLE SPECS
ISO 6134 - Type 2 Class B Grade M

STANDARD PACKAGING
Coil
 WATER, AIR & STEAM HOSES

STEAMSAFE/7
STEAM & VAPOUR HOSE FOR
FOOD INDUSTRY CLEANING

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80040010* 10 3/8" 20.0 0.79 7 105 70 1,050 55 2.17 280 0.19 MARKET FITTINGS
H80040012* 12 1/2" 23.0 0.91 7 105 70 1,050 65 2.56 370 0.25 MARKET FITTINGS
22

H80040016* 16 5/8" 26.0 1.02 7 105 70 1,050 85 3.35 430 0.29 MARKET FITTINGS
H80040019* 19 3/4" 31.0 1.22 7 105 70 1,050 100 3.94 580 0.39 MARKET FITTINGS
H80040025* 25 1" 37.0 1.46 7 105 70 1,050 125 4.92 750 0.50 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall delivery structure -40 °C, -40 °F
• Compact, lightweight and flexible 170 °C, 338 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 20m
White EPM rubber
(DN10); 40m (DN12 - DN16); 61m (DN19 - DN25)
REINFORCEMENT

High tensile synthetic cord

APPLICATIONS & FLUIDS
• Potable hot water mixed with steam and detergents
COVER
• Suitable for washdown and sterilization in the food
Blue synthetic EPDM rubber, ozone, abrasion and weathering
industry resistant

APPLICABLE SPECS
FDA Title 21, art. 177.2600 for aqueous foods

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES

COOLER/5
INDUSTRY & GENERAL PURPOSE WATER
COOLING HOSE

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80041016* 16 5/8" 26.0 1.02 5 75 15 225 80 3.15 400 0.27 SR+D08000 series
H80041019* 19 3/4" 29.0 1.14 5 75 15 225 95 3.74 450 0.30 SR+D08000 series

23
H80041025* 25 1" 35.0 1.38 5 75 15 225 125 4.92 580 0.39 SR+D08000 series
H80041031* 31 1.1/4" 42.0 1.65 5 75 15 225 160 6.30 680 0.45 SR+D08000 series
H80041038* 38 1.1/2" 48.0 1.89 5 75 15 225 190 7.48 830 0.55 SR+D08000 series
H80041051* 51 2" 61.0 2.40 5 75 15 225 260 10.24 1,300 0.87 SR+D08000 series
H80041076* 76 3" 96.0 3.78 5 75 15 225 380 14.96 1,900 1.27 SR+D08000 series
H80041102* 102 4" 114.0 4.49 5 75 15 225 480 18.90 2,810 1.87 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -60 °C, -76 °F
• Compact, lightweight and extremely flexible 200 °C, 392 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 40m
Red, VMQ silicone
(DN16 to DN76); 20m (DN102)
REINFORCEMENT

High tensile synthetic cord and steel helix body wire

APPLICATIONS & FLUIDS
• Suction & delivery of hot air and water in engine cooling COVER
systems
Red VMQ sliicone, high temperature and weathering resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 WATER, AIR & STEAM HOSES

COOLSERVICE/G
HIGH FLEXIBILITY WATER GLYCOL COOLING
SUCTION & DELIVERY HOSE

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80059016* 16 5/8" 26.3 1.03 5 75 20 290 33 1.29 450 0.3 SR+D08000 series
H80059019* 19 3/4" 29.3 1.15 5 75 20 290 36 1.41 500 0.34 SR+D08000 series
24

H80059022* 22 7/8" 34.5 1.37 5 75 20 290 36 1.41 540 0.36 SR+D08000 series
H80059025* 25 1" 37.0 1.46 5 75 20 290 36 1.41 580 0.39 SR+D08000 series
H80059031* 31 1.1/4" 44.0 1.73 5 75 20 290 50 1.96 730 0.49 SR+D08000 series
H80059038* 38 1.1/2” 50.5 1.99 5 75 20 290 70 2.76 980 0.66 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall hose used for the suction and delivery of water-
glycol cooling lines at high temperature 125 °C, 257 °F
• Flat corrugated (grooved) cover for improved flexibility
and reduced bend radius TUBE
• Long lasting in severe applications EPDM rubber
• Resistance to Vacuum
• Max. length: 61m REINFORCEMENT

High tensile synthetic cord and steel helix body wire

APPLICATIONS & FLUIDS

• Suction and Delivery hose for hot water and coolant COVER
fluids, applied in engine cooling and heating systems Environmental resistant synthetic rubber, flat corrugated cover
style
• Radiator hose
• Outstanding flexibility, installation in very narrow spaces APPLICABLE SPECS
• Water and water-glycol solutions Manuli design, safety factor 4:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
 ANTI-STATIC FUEL HOSES

When conveying fuels the last thing you want is the possibility
of static discharges. Manuli’s anti-static fuel hoses incorporate
various combinations of copper grounding wires and anti-static
rubber compounds to ensure that the risk of static build-up is
eliminated.
 HOSE HOSE
APPLICATION RANGE HOSE PAGE
TYPE STRUCTURE

FUEL HOSE WITH HIGH HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELSERVICE/5 SDC
FLEXIBILITY WIRE & COPPER GROUNDING WIRES 27

HIGH TENSILE SYNTHETIC CORD & COPPER

FUELSERVICE/10 D FUEL & OIL HOSE
GROUNDING WIRES 28

HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY

FUELSERVICE/10 SD FUEL & OIL HOSE
WIRE & COPPER GROUNDING WIRES 29

HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY

FUELSERVICE/10 R4 FUEL & OIL HOSE
WIRE & COPPER GROUNDING WIRES 30

EN 12115 FUEL & MINERAL OIL HIGH TENSILE SYNTHETIC CORD & COPPER
FUELSERVICE/16 D
HOSE GROUNDING WIRES 31

EN 12115 FUEL & MINERAL OIL HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELSERVICE FUELSERVICE/16 SD
HOSE WIRE & COPPER GROUNDING WIRES 32

FUELSERVICE/20 D EN 1825 TYPE B FUEL HOSE HIGH TENSILE SYNTHETIC CORD & COPPER
EN 1825-B FOR AIRCRAFT REFUELLING GROUNDING WIRES 33

FUELSERVICE/20 D EN 1825 TYPE C FUEL HOSE

EN 1825-C FOR AIRCRAFT REFUELLING
HIGH TENSILE SYNTHETIC CORD 34

FUELSERVICE/20 D EN 1825 TYPE E FUEL HOSE HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUEL EN 1825-E FOR AIRCRAFT REFUELLING WIRE & COPPER GROUNDING WIRES 35

HIGH TENSILE SYNTHETIC CORD & COPPER

FUELSERVICE/21 D FUEL & OIL HOSE, HEAVY DUTY
GROUNDING WIRES 36

HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY

FUELSERVICE/SD FUEL & OIL HOSE, HEAVY DUTY
WIRE & COPPER GROUNDING WIRES 37

EN 1360 TYPE 1 FUEL & HIGH TENSILE SYNTHETIC CORD & COPPER
FUELDISPENSER/D
MINERAL OIL HOSE GROUNDING WIRES 38
FUELDISPENSER
EN 1360 TYPE 2 FUEL & HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELDISPENSER/SD
MINERAL OIL HOSE WIRE & COPPER GROUNDING WIRES 39

EN 1761 TYPE D HOSE FOR HIGH TENSILE SYNTHETIC CORD & COPPER
FUELTRUCK/16 D
TRUCK SYSTEMS GROUNDING WIRES 40
FUELTRUCK
EN 1761 TYPE SD HOSE FOR HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELTRUCK/16 SD
TRUCK SYSTEMS WIRE & COPPER GROUNDING WIRES 41

FUEL DELIVERY WITH HIGH HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELFLEX FUELFLEX/17 SDC
FLEXIBILITY WIRE & COPPER GROUNDING WIRES 42

FUEL DELIVERY WITH HIGH HIGH TENSILE SYNTHETIC CORD, THERMOPLASTIC

FUELTANKER FUELTANKER/10 SD
ABRASION RESISTANCE OUTER HELIX & COPPER GROUNDING WIRES 43

DRILLING MUDS, OIL & HIGH TENSILE SYNTHETIC CORD & COPPER
FRACKING MUDSERVICE MUDSERVICE/28 D
ABRASIVE SLURRIES GROUNDING WIRES 44

PROGAS LPG D LPG HOSE HIGH TENSILE SYNTHETIC CORD 45

LPG PROGAS
HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
PROGAS LPG SD LPG HOSE
WIRE 46
ANTI-STATIC FUEL HOSES

FUELSERVICE/5 SDC
FUEL SUCTION & DELIVERY HOSE
WITH HIGH FLEXIBILITY

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80024019* 19 3/4" 30.0 1.18 5 75 15 225 20 0.79 500 0.33 SR+D08000 series
H80024025* 25 1" 36.0 1.42 5 75 15 225 25 0.98 610 0.41 SR+D08000 series

27
H80024031* 31 1.1/4" 43.0 1.69 5 75 15 225 30 1.18 740 0.49 SR+D08000 series
H80024038* 38 1.1/2" 49.0 1.93 5 75 15 225 40 1.57 830 0.55 SR+D08000 series
H80024051* 51 2" 62.0 2.44 5 75 15 225 50 1.97 1,150 0.77 SR+D08000 series
H80024063* 63 2.1/2" 76.0 2.99 5 75 15 225 65 2.56 1,370 0.91 SR+D08000 series
H80024076* 76 3" 88.0 3.46 5 75 15 225 75 2.95 1,810 1.21 SR+D08000 series
H80024102* 102 4" 115.0 4.53 5 75 15 225 110 4.33 2,700 1.80 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -30 °C, -22 °F
• Normal corrugated cover offers lowest bend radius in 100 °C, 212 °F
category
• Compact, lightweight and extremely flexible
TUBE
• Robust hose structure for longer life in severe
applications Black NBR rubber
• Long length assemblies available - Max length: 61m
REINFORCEMENT
High tensile synthetic cord with steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

• Fuels, oils, petroleum & its derivatives with aromatic COVER

content up to 50% Black synthetic, normal corrugated CR rubber, anti-static (R<106
Ohm/m), oil, fuel, abrasion and weathering resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 ANTI-STATIC FUEL HOSES

FUELSERVICE/10 D
FUEL & OIL HOSE

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80004019* 19 3/4” 31.4 1.24 10 150 31 450 90 3.54 503 0.34 SR+D08000 series
H80004025* 25 1” 37.8 1.49 10 150 31 450 115 4.53 629 0.42 SR+D08000 series
28

H80004031* 31 1.1/4” 44.4 1.75 10 150 31 450 150 5.91 788 0.53 SR+D08000 series
H80004038* 38 1.1/2” 52.5 2.07 10 150 31 450 180 7.09 857 0.58 SR+D08000 series
H80004051* 51 2” 65.3 2.57 10 150 31 450 240 9.45 1,129 0.76 SR+D08000 series
H80004063* 63 2.1/2” 78.5 3.09 10 150 31 450 300 11.81 1,679 1.13 SR+D08000 series
H80004076* 76 3” 94.3 3.71 10 150 31 450 380 14.96 2,045 1.37 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Softwall delivery structure 90 °C, 194 °F
• Highly robust hose structure
• Long lasting in severe applications
TUBE
• Long length assemblies available - Max length: 61m
Black NBR rubber

REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding

COVER
• Fuels, oils & diesel with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES

FUELSERVICE/10 SD
FUEL & OIL HOSE

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80005019* 19 3/4” 28.1 1.11 10 150 31 450 80 3.15 413 0.28 SR+D08000 series
H80005025* 25 1” 34.5 1.36 10 150 31 450 105 4.13 521 0.35 SR+D08000 series

29
H80005031* 31 1.1/4” 41.1 1.62 10 150 31 450 135 5.31 637 0.43 SR+D08000 series
H80005038* 38 1.1/2” 47.5 1.87 10 150 31 450 165 6.50 760 0.51 SR+D08000 series
H80005051* 51 2” 61.3 2.41 10 150 31 450 230 9.06 1,217 0.82 SR+D08000 series
H80005063* 63 2.1/2” 74.4 2.93 10 150 31 450 290 11.42 1,723 1.15 SR+D08000 series
H80005076* 76 3” 87.5 3.44 10 150 31 450 360 14.17 2,386 1.60 SR+D08000 series
H80005102* 102 4” 114.9 4.52 10 150 31 450 450 17.72 3,530 2.37 SR+D08000 series
H80005127* 127 5” 142.0 5.59 10 150 31 450 510 20.08 5,800 3.90 MARKET FITTINGS
H80005152* 152 6” 167.0 6.57 10 150 31 450 610 24.02 7,200 4.85 MARKET FITTINGS
H80005305* 305 12” 323.0 12.72 10 150 31 450 1,200 47.24 10,200 6.80 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -30 °C, -22 °F
• Compact, lightweight and flexible 90 °C, 194 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m
Black NBR rubber
(DN19 - DN102); 30.5m (DN127 - DN152); 12m (DN305)
REINFORCEMENT
High tensile synthetic cord and steel helix body wire, and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

COVER
• Fuels, oils & diesel with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 ANTI-STATIC FUEL HOSES

FUELSERVICE/10 R4
FUEL & OIL HOSE

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80064019* 19 3/4" 29.5 1.16 21 300 84 1218 80 3.14 530 0.36 SR+D08000 series
H80064025* 25 1" 36 1.41 17 240 70 1015 100 3.93 660 0.44 SR+D08000 series
30

H80064031* 31 1.1/4" 42.5 1.67 14 200 56 812 130 5.11 810 0.54 SR+D08000 series
H80064038* 38 1.1/2" 49.5 1.94 11 160 44 638 170 6.69 1,050 0.71 SR+D08000 series
H80064040* 40 1.9/16” 50.0 1.97 10 150 40 580 170 6.69 1,280 0.85 MARKET FITTINGS
H80064045* 45 1.3/4” 56.0 2.20 10 150 40 580 180 7.09 1,490 0.99 MARKET FITTINGS
H80064051* 51 2" 61.5 2.42 10 150 40 580 200 7.87 1,217 0.82 SR+D08000 series
H80064063* 63 2.1/2" 74.5 2.93 10 150 40 580 250 9.84 1,723 1.16 SR+D08000 series
H80064076* 76 3" 88.5 3.48 10 150 40 580 300 11.81 2,500 1.68 SR+D08000 series
H80064102* 102 4" 116 4.56 10 150 40 580 400 15.74 3,600 2.42 SR+D08000 series
H80064127* 127 5” 144.0 5.67 10 150 40 580 510 20.08 5,360 3.57 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Suitable as SAE J517 Type 100R4 -30 °C, -22 °F
• Hardwall suction and delivery structure 90 °C, 194 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
TUBE
applications
• Long length assemblies available - Max length: 61m Black NBR rubber
(DN19 - DN102); 30.5m (DN127)
• Vacuum resistance: -0.9 bar
REINFORCEMENT
High tensile synthetic cord and steel helix body wire, and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

COVER
• Fuels & oils with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant

APPLICABLE SPECS
Manuli design, safety factor 4:1; Exceeds performance SAE
100R4

STANDARD PACKAGING
Coil

• Hydraulic oils temperature range -40°C to 100°C (-40°F to +212°F)

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES

FUELSERVICE/16 D
FUEL & MINERAL OIL DELIVERY HOSE
EN 12115

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80028019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 600 0.40 SR+D08000 series
H80028025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 890 0.59 SR+D08000 series

31
H80028031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 1,000 0.67 SR+D08000 series
H80028038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,350 0.90 SR+D08000 series
H80028051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 2,000 1.33 SR+D08000 series
H80028063* 63 2.1/2" 80.0 3.15 16 240 64 960 300 11.81 2,500 1.67 SR+D08000 series
H80028076* 76 3" 92.0 3.62 16 240 64 960 350 13.78 2,850 1.90 SR+D08000 series
H80028102* 102 4" 122.0 4.80 16 240 64 960 450 17.72 4,150 2.77 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall delivery structure
80 °C, 176 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black anti-static NBR rubber

REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding

• Fuels, oils, petroleum & its derivatives with aromatic COVER

content up to 50%
Black synthetic CR rubber, fire-proof, anti-static (R<1G Ohm/m),
• Cover compound is tested an approved according to chemical, ozone and weathering resistant
EN 60079-0:2012 (R ≤ 109 Ohm/m)
• Hose structure designed to assure and maintain the APPLICABLE SPECS
requirements for the ATEX working conditions EN 12115 (Grade Ω/T) / TRbF; EN 60079-0

STANDARD PACKAGING
Coil
 ANTI-STATIC FUEL HOSES

FUELSERVICE/16 SD
FUEL & MINERAL OIL SUCTION & DELIVERY
HOSE EN 12115

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80029019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 700 0.47 SR+D08000 series
H80029025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 900 0.60 SR+D08000 series
32

H80029031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 1,200 0.80 SR+D08000 series
H80029038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,500 1.00 SR+D08000 series
H80029051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 2,300 1.53 SR+D08000 series
H80029063* 63 2.1/2" 80.0 3.15 16 240 64 960 300 11.81 2,800 1.87 SR+D08000 series
H80029076* 76 3" 92.0 3.62 16 240 64 960 350 13.78 3,300 2.20 SR+D08000 series
H80029102* 102 4" 118.0 4.65 12 180 48 720 450 17.72 4,700 3.13 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall suction and delivery structure
80 °C, 176 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black anti-static NBR rubber

REINFORCEMENT
High tensile synthetic cord with steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

• Fuels, oils, petroleum & its derivatives with aromatic COVER

content up to 50%
Black synthetic CR rubber, fire-proof, anti-static (R<1G Ohm/m),
• Cover compound is tested an approved according to chemical, ozone and weathering resistant
EN 60079-0:2012 (R ≤ 109 Ohm/m)
• Hose structure designed to assure and maintain the APPLICABLE SPECS
requirements for the ATEX working conditions EN 12115 (Grade Ω/T) / TRbF; EN 60079-0

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES

FUELSERVICE/20 D EN 1825-B
FUEL DELIVERY, AIRCRAFT GROUND
REFUELLING EN 1825 TYPE B

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80032019* 19 3/4" 29.0 1.14 20 300 80 1,200 113 4.45 520 0.35 SR+D08000 series
H80032025* 25 1" 38.0 1.50 20 300 80 1,200 150 5.91 840 0.56 SR+D08000 series

33
H80032031* 31 1.1/4" 45.0 1.77 20 300 80 1,200 200 7.87 1,000 0.67 SR+D08000 series
H80032038* 38 1.1/2" 51.0 2.01 20 300 80 1,200 230 9.06 1,160 0.77 SR+D08000 series
H80032051* 51 2" 65.0 2.56 20 300 80 1,200 305 12.01 1,700 1.13 SR+D08000 series
H80032063* 63 2.1/2" 79.0 3.11 20 300 80 1,200 390 15.35 2,070 1.38 SR+D08000 series
H80032076* 76 3" 92.0 3.62 20 300 80 1,200 460 18.11 2,560 1.71 SR+D08000 series
H80032102* 102 4" 120.0 4.72 20 300 80 1,200 610 24.02 3,740 2.49 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall delivery structure
70 °C, 158 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black NBR rubber

REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding

• Aircraft ground refuelling

COVER
• Fuels, oils, petroleum & its derivatives with aromatic
Black synthetic CR rubber, fire-proof, anti-static, chemical, ozone
content up to 50% and weathering resistant

APPLICABLE SPECS
EN 1825 Type B / TRbF

STANDARD PACKAGING
Coil
 ANTI-STATIC FUEL HOSES

FUELSERVICE/20 D EN 1825-C
FUEL DELIVERY, AIRCRAFT GROUND
REFUELLING EN 1825 TYPE C

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80033019* 19 3/4" 29.0 1.14 20 300 80 1,200 113 4.45 520 0.35 SR+D08000 series
H80033025* 25 1" 38.0 1.50 20 300 80 1,200 150 5.91 840 0.56 SR+D08000 series
34

H80033031* 31 1.1/4" 45.0 1.77 20 300 80 1,200 200 7.87 1,000 0.67 SR+D08000 series
H80033038* 38 1.1/2" 51.0 2.01 20 300 80 1,200 230 9.06 1,160 0.77 SR+D08000 series
H80033051* 51 2" 65.0 2.56 20 300 80 1,200 305 12.01 1,700 1.13 SR+D08000 series
H80033063* 63 2.1/2" 79.0 3.11 20 300 80 1,200 390 15.35 2,070 1.38 SR+D08000 series
H80033076* 76 3" 92.0 3.62 20 300 80 1,200 460 18.11 2,560 1.71 SR+D08000 series
H80033102* 102 4" 120.0 4.72 20 300 80 1,200 610 24.02 3,740 2.49 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall delivery structure
70 °C, 158 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black NBR conductive rubber

REINFORCEMENT

High tensile synthetic cord

APPLICATIONS & FLUIDS
• Aircraft ground refuelling
COVER
• Fuels, oils, petroleum & its derivatives with aromatic
Black synthetic CR rubber, fire-proof, anti-static (R<106 Ohm/m),
content up to 50% chemical, ozone and weathering resistant

APPLICABLE SPECS
EN 1825 Type C / TRbF

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES

FUELSERVICE/20 SD EN 1825-E
FUEL SUCTION & DELIVERY, AIRCRAFT GROUND
REFUELLING EN 1825 TYPE E

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80034019* 19 3/4" 31.0 1.22 20 300 80 1,200 85 3.35 690 0.46 SR+D08000 series
H80034025* 25 1" 39.0 1.54 20 300 80 1,200 115 4.53 970 0.65 SR+D08000 series

35
H80034031* 31 1.1/4" 46.0 1.81 20 300 80 1,200 150 5.91 1,220 0.81 SR+D08000 series
H80034038* 38 1.1/2" 53.0 2.09 20 300 80 1,200 180 7.09 1,590 1.06 SR+D08000 series
H80034051* 51 2" 67.0 2.64 20 300 80 1,200 250 9.84 2,320 1.55 SR+D08000 series
H80034063* 63 2.1/2" 81.0 3.19 20 300 80 1,200 325 12.80 2,860 1.91 SR+D08000 series
H80034076* 76 3" 95.0 3.74 20 300 80 1,200 400 15.75 3,700 2.47 SR+D08000 series
H80034102* 102 4" 123.0 4.84 20 300 80 1,200 550 21.65 5,170 3.45 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall suction & delivery structure
70 °C, 158 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black NBR anti-static rubber

REINFORCEMENT
High tensile synthetic cord with steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

• Aircraft ground refuelling

COVER
• Fuels, oils, petroleum & its derivatives with aromatic
Black synthetic CR rubber, fire-proof, anti-static (R<106 Ohm/m),
content up to 50% chemical, ozone and weathering resistant

APPLICABLE SPECS
EN 1825 Type E / TRbF

STANDARD PACKAGING
Coil
 ANTI-STATIC FUEL HOSES

FUELSERVICE/21 D
FUEL & OIL HOSE, HEAVY DUTY

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80006019* 19 3/4” 31.4 1.24 21 300 63 910 90 3.54 508 0.34 SR+D08000 series
H80006025* 25 1” 38.2 1.50 21 300 63 910 115 4.53 575 0.39 SR+D08000 series
36

H80006031* 31 1.1/4” 45.0 1.77 21 300 63 910 150 5.91 729 0.49 SR+D08000 series
H80006038* 38 1.1/2” 51.6 2.03 21 300 63 910 180 7.09 1,027 0.69 SR+D08000 series
H80006051* 51 2” 62.1 2.44 21 300 63 910 240 9.45 1,293 0.87 SR+D08000 series
H80006063* 63 2.1/2” 78.2 3.08 21 300 63 910 300 11.81 1,746 1.17 SR+D08000 series
H80006076* 76 3” 88.9 3.50 21 300 63 910 380 14.96 2,039 1.37 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Softwall delivery structure 90 °C, 194 °F
• Highly robust heavy duty hose structure
• Long lasting in severe applications
TUBE
• Long length assemblies available - Max length: 61m
Black NBR rubber

REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding

COVER
• Fuels, oils & diesel with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES

FUELSERVICE/21 SD
FUEL & OIL HOSE, HEAVY DUTY

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80020051* 51 2” 62.1 2.44 21 300 63 910 230 9.06 1,288 0.86 SR+D08000 series
H80020076* 76 3” 88.9 3.50 21 300 63 910 360 14.17 2,497 1.67 SR+D08000 series

37
H80020102* 102 4” 115.1 4.53 21 300 63 910 510 20.08 3,633 2.44 SR+D08000 series
H80020152* 152 6” 170.0 6.69 21 300 63 910 610 24.02 8,250 5.55 MARKET FITTINGS
H80020203* 203 8” 225.0 8.86 21 300 63 910 800 31.50 12,300 8.28 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -30 °C, -22 °F
• Compact, lightweight and flexible 90 °C, 194 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m
NBR rubber, abrasion resistant, thick tube
(DN51 - DN102); 30.5m (DN152 - DN203)
REINFORCEMENT
High tensile synthetic cord and steel helix body wire, and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

COVER
• Fuels, oils & diesel with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 ANTI-STATIC FUEL HOSES

FUELDISPENSER/D
FUEL & MINERAL OIL DELIVERY
EN 1360 TYPE 1

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80026012* 12 1/2" 22.0 0.87 16 240 48 720 60 2.36 340 0.23 SR+D08000 series
H80026016* 16 5/8" 26.0 1.02 16 240 48 720 80 3.15 480 0.32 SR+D08000 series
38

H80026019* 19 3/4" 30.0 1.18 16 240 48 720 100 3.94 530 0.35 SR+D08000 series
H80026025* 25 1" 38.0 1.50 16 240 48 720 150 5.91 740 0.49 SR+D08000 series
H80026031* 31 1.1/4" 45.0 1.77 16 240 48 720 175 6.89 1,100 0.73 SR+D08000 series
H80026038* 38 1.1/2" 51.0 2.01 16 240 48 720 225 8.86 1,240 0.83 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall delivery structure
70 °C, 158 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black NBR rubber

REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding

• Fuels, oils, petroleum & its derivatives with aromatic COVER

content up to 50% Black synthetic CR rubber, fire-proof, anti-static (R<1G Ohm/m),
chemical, ozone and weathering resistant

APPLICABLE SPECS
EN 1360 Type 1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES

FUELDISPENSER/SD
FUEL & MINERAL OIL SUCTION & DELIVERY
EN 1360 TYPE 2

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80027019* 19 3/4" 30.0 1.18 16 240 48 720 100 3.94 630 0.42 SR+D08000 series
H80027025* 25 1" 38.0 1.50 16 240 48 720 150 5.91 930 0.62 SR+D08000 series

39
H80027031* 31 1.1/4" 45.0 1.77 16 240 48 720 175 6.89 1,180 0.79 SR+D08000 series
H80027038* 38 1.1/2" 51.0 2.01 16 240 48 720 225 8.86 1,450 0.97 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall suction and delivery structure
70 °C, 158 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black anti-static NBR rubber

REINFORCEMENT
High tensile synthetic cord with steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

• Fuels, oils, petroleum & its derivatives with aromatic COVER

content up to 50% Black synthetic CR rubber, fire-proof, anti-static, chemical, ozone
and weathering resistant

APPLICABLE SPECS
EN 1360 Type 2 / TRbF

STANDARD PACKAGING
Coil
 ANTI-STATIC FUEL HOSES

FUELTRUCK/16 D
FUEL & MINERAL OIL DELIVERY HOSE
FOR TRUCK SYSTEMS
EN 1761 TYPE D

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80030019* 19 3/4" 31.0 1.22 16 240 48 720 125 4.92 630 0.42 SR+D08000 series
H80030025* 25 1" 37.0 1.46 16 240 48 720 150 5.91 730 0.49 SR+D08000 series
40

H80030031* 31 1.1/4" 44.0 1.73 16 240 48 720 175 6.89 940 0.63 SR+D08000 series
H80030038* 38 1.1/2" 51.0 2.01 16 240 48 720 225 8.86 1,190 0.79 SR+D08000 series
H80030051* 51 2" 67.0 2.64 16 240 48 720 275 10.83 2,000 1.33 SR+D08000 series
H80030063* 63 2.1/2" 79.0 3.11 16 240 48 720 300 11.81 2,240 1.49 SR+D08000 series
H80030076* 76 3" 92.0 3.62 16 240 48 720 350 13.78 2,730 1.82 SR+D08000 series
H80030102* 102 4" 118.0 4.65 16 240 48 720 450 17.72 3,700 2.47 SR+D08000 series
H80030127* 127 5" 145.0 5.71 16 240 48 720 635 25.00 4,820 3.21 MARKET FITTINGS
H80030152* 152 6" 172.0 6.77 16 240 48 720 750 29.53 6,140 4.09 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall delivery structure -30 °C, -22 °F
• Compact, lightweight and flexible 70 °C, 158 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m
Black NBR rubber
(DN19 - DN102); 30.5m (DN127 - DN152)
REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding

• Fuels, oils, petroleum & its derivatives with aromatic COVER

content up to 50% Black synthetic CR rubber, fire-proof, anti-static, chemical, ozone
and weathering resistant

APPLICABLE SPECS
EN 1761 Type D

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES

FUELTRUCK/16 SD
FUEL & MINERAL OIL SUCTION &
DELIVERY HOSE FOR TRUCK SYSTEMS
EN 1761 TYPE SD

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80031019* 19 3/4" 31.0 1.22 16 240 48 720 125 4.92 670 0.45 SR+D08000 series
H80031025* 25 1" 37.0 1.46 16 240 48 720 150 5.91 810 0.54 SR+D08000 series

41
H80031031* 31 1.1/4" 44.0 1.73 16 240 48 720 175 6.89 1,040 0.69 SR+D08000 series
H80031038* 38 1.1/2" 51.0 2.01 16 240 48 720 225 8.86 1,380 0.92 SR+D08000 series
H80031051* 51 2" 67.0 2.64 16 240 48 720 275 10.83 2,220 1.48 SR+D08000 series
H80031063* 63 2.1/2" 79.0 3.11 16 240 48 720 300 11.81 2,630 1.75 SR+D08000 series
H80031076* 76 3" 92.0 3.62 16 240 48 720 350 13.78 3,380 2.25 SR+D08000 series
H80031102* 102 4" 118.0 4.65 16 240 48 720 450 17.72 4,420 2.95 SR+D08000 series
H80031127* 127 5" 145.0 5.71 16 240 48 720 635 25.00 5,800 3.87 MARKET FITTINGS
H80031152 152 6" 172.0 6.77 16 240 48 720 750 29.53 8,150 5.43 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -30 °C, -22 °F
• Compact, lightweight and flexible 70 °C, 158 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m
Black NBR rubber
(DN19 - DN102); 30.5m (DN127 - DN152)
REINFORCEMENT
High tensile synthetic cord with steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

• Fuels, oils, petroleum & its derivatives with aromatic COVER

content up to 50% Black synthetic CR rubber, fire-proof, anti-static, chemical, ozone
and weathering resistant

APPLICABLE SPECS
EN 1761 Type SD

STANDARD PACKAGING
Coil
 ANTI-STATIC FUEL HOSES

FUELFLEX/17 SDC
FUEL SUCTION & DELIVERY HOSE
WITH HIGH FLEXIBILITY

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80025019* 19 3/4" 31.0 1.22 17 255 68 1,020 19 0.75 670 0.45 SR+D08000 series
H80025025* 25 1" 37.0 1.46 17 255 68 1,020 25 0.98 840 0.56 SR+D08000 series
42

H80025031* 31 1.1/4" 44.0 1.73 17 255 68 1,020 32 1.26 980 0.65 SR+D08000 series
H80025038* 38 1.1/2" 49.0 1.93 17 255 68 1,020 38 1.50 1,120 0.75 SR+D08000 series
H80025051* 51 2" 64.0 2.48 17 255 68 1,020 51 2.01 1,480 0.99 SR+D08000 series
H80025063* 63 2.1/2" 77.0 3.03 15 225 60 900 63 2.48 1,950 1.30 SR+D08000 series
H80025076* 76 3" 89.0 3.50 15 225 60 900 76 2.99 2,150 1.43 SR+D08000 series
H80025102* 102 4" 117.0 4.61 10 150 40 600 102 4.02 3,000 2.00 SR+D08000 series
H80025152* 152 6" 170.0 6.69 10 150 40 600 152 5.98 5,700 3.80 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -30 °C, -22 °F
• Normal corrugated cover offers lowest bend radius in 100 °C, 212 °F
category
• Compact, lightweight and extremely flexible
TUBE
• Outstanding abrasion resistance
• Robust hose structure for longer life in severe Black NBR rubber
applications
• Long length assemblies available - Max length: 61m
(DN19 - DN102); 30.5m (DN152) REINFORCEMENT
High tensile synthetic cord with steel helix body wire and copper
APPLICATIONS & FLUIDS wire for grounding

• Fuels, oils, petroleum & its derivatives with aromatic COVER

content up to 60% Black synthetic, normal corrugated CR rubber, anti-static (R<106
Ohm/m), oil, fuel, abrasion and weathering resistant

APPLICABLE SPECS
Manuli design, safety factor 4:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES

FUELTANKER/10 SD
SUCTION & DELIVERY HOSE FOR FUEL
AND MINERAL OIL

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80060051* 51 2" 60.0 2.36 10 150 30 450 110 4.33 1,550 1.05 MARKET FITTINGS
H80060063* 63 2.1/2" 73.5 2.89 10 150 30 450 138 5.43 1,970 1.33 MARKET FITTINGS

43
H80060076* 76 3" 86.0 3.39 10 150 30 450 170 6.69 2,250 1.52 MARKET FITTINGS
H80060102* 102 4" 116.0 4.57 10 150 30 450 230 9.06 3,000 2.02 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall suction and delivery structure 80 °C, 176 °F
• Compact, lightweight and flexible
• Extreme abrasion resistance TUBE
• Designed for tankers Black NBR anti-static rubber
• Long length assemblies available - Max length: 40m
REINFORCEMENT

High tensile synthetic cord and 1 copper wire for grounding

APPLICATIONS & FLUIDS
• Suction & delivery hose for mineral oils, diesel fuel and
gasoline with aromatic contents up to 50% COVER
• Very light and flexible Black, smooth, glossy NBR/PVC rubber with red thermoplastic
spiral, resistant to abrasion, ozone and weathering
• Extraordinarily resistant to abrasion
• Ideal for fuel distribution company road tankers APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil

REMARKS
• Hose wall thickness: DN 51: 4.5mm; DN 63 & DN 76: 5.0mm; DN 102: 7.0mm
• Red thermoplastic spiral diameter: DN 51 & DN 63: 6mm; DN 76 & DN 102: 8mm
 ANTI-STATIC FUEL HOSES

MUDSERVICE/28 D
DELIVERY HOSE FOR DRILLING MUDS,
OIL & ABRASIVE SLURRIES

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80035076* 76 3" 96.0 3.78 28 400 112 1,600 559 22.01 3,700 3.27 MARKET FITTINGS
H80035102* 102 4" 124.0 4.88 28 400 112 1,600 762 30.00 4,900 4.33 MARKET FITTINGS
44

H80035127* 127 5" 153.0 6.02 28 400 112 1,600 1,118 44.02 7,000 6.19 MARKET FITTINGS
H80035152* 152 6" 178.0 7.01 28 400 112 1,600 1,524 60.00 8,400 7.43 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall delivery structure -30 °C, -22 °F
• Compact, lightweight and flexible 80 °C, 176 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m
Black X-NBR rubber
(DN76 - DN102); 30.5m (DN127 - DN152)
REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding

• Delivery of petroleum muds, drilling rig services and

COVER
crude oil with aromatic contents up to 50%
Black CR rubber, flame retardant, oil, grease, sea water and
• Fracking operations in oilfields ozone resistance

APPLICABLE SPECS
Manuli design, safety factor 4:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES

PROGAS LPG D
DELIVERY HOSE FOR LPG

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80011012* 12 1/2" 23.0 0.91 25 375 100 1,500 100 3.94 390 0.26 SR+D08000 series
H80011016* 16 5/8" 26.0 1.02 25 375 100 1,500 120 4.72 470 0.31 SR+D08000 series

45
H80011019* 19 3/4" 31.0 1.22 25 375 100 1,500 160 6.30 630 0.42 SR+D08000 series
H80011025* 25 1" 38.0 1.50 25 375 100 1,500 200 7.87 840 0.56 SR+D08000 series
H80011031* 31 1.1/4" 45.0 1.77 25 375 100 1,500 250 9.84 1,050 0.70 SR+D08000 series
H80011038* 38 1.1/2" 52.0 2.05 25 375 100 1,500 320 12.60 1,200 0.80 SR+D08000 series
H80011051* 51 2" 67.0 2.64 25 375 100 1,500 400 15.75 1,830 1.22 SR+D08000 series
H80011063* 63 2.1/2" 81.0 3.19 25 375 100 1,500 550 21.65 2,500 1.67 SR+D08000 series
H80011076* 76 3" 94.0 3.70 25 375 100 1,500 650 25.59 3,020 2.01 SR+D08000 series
H80011102* 102 4" 120.0 4.72 25 375 100 1,500 800 31.50 3,860 2.57 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall delivery structure 70 °C, 158 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe TUBE
applications Black NBR conductive rubber
• Long length assemblies available - Max length: 61m
REINFORCEMENT

High tensile synthetic cord

APPLICATIONS & FLUIDS
COVER
• Delivery hose for LPG
Black, pin-pricked CR rubber, fire-proof, anti-static
(R<106 Ohm/m), oil, abrasion and weathering resistant

APPLICABLE SPECS
EN 1762 Type D / TRbF

STANDARD PACKAGING
Coil
 ANTI-STATIC FUEL HOSES

PROGAS LPG SD
SUCTION & DELIVERY HOSE FOR LPG

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80057012* 12 1/2" 23.0 0.91 25 375 100 1,500 55 2.17 440 0.29 SR+D08000 series
H80057016* 16 5/8" 26.0 1.02 25 375 100 1,500 75 2.95 520 0.35 SR+D08000 series
46

H80057019* 19 3/4" 31.0 1.22 25 375 100 1,500 100 3.94 680 0.45 SR+D08000 series
H80057025* 25 1" 38.0 1.50 25 375 100 1,500 140 5.51 900 0.60 SR+D08000 series
H80057031* 31 1.1/4" 45.0 1.77 25 375 100 1,500 190 7.48 1,180 0.79 SR+D08000 series
H80057038* 38 1.1/2" 52.0 2.05 25 375 100 1,500 200 7.87 1,500 1.00 SR+D08000 series
H80057051* 51 2" 67.0 2.64 25 375 100 1,500 280 11.02 2,200 1.47 SR+D08000 series
H80057063* 63 2.1/2" 81.0 3.19 25 375 100 1,500 380 14.96 2,900 1.93 SR+D08000 series
H80057076* 76 3" 94.0 3.70 25 375 100 1,500 460 18.11 3,580 2.39 SR+D08000 series
H80057102* 102 4" 120.0 4.72 25 375 100 1,500 625 24.61 4,560 3.04 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-30 °C, -22 °F
• Hardwall suction & delivery structure 70 °C, 158 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe TUBE
applications Black NBR conductive rubber
• Long length assemblies available - Max length: 61m
REINFORCEMENT

High tensile synthetic cord and steel helix body wire

APPLICATIONS & FLUIDS
COVER
• Suction & delivery hose for LPG
Black, pin-pricked CR rubber, fire-proof, anti-static
(R<106 Ohm/m), oil, abrasion and weathering resistant

APPLICABLE SPECS
EN 1762 Type SD / TRbF

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
 CHEMICAL HOSES

The transport of aggressive chemicals is fraught with dangers

and technical difficulties, so the Manuli range of chemical hoses is
designed with safety as our watchword. With a range of different
tube materials designed to suit a wide range of fluids, the chemical
hose family offers peace of mind when transporting even the most
aggressive chemicals.
 HOSE HOSE
APPLICATION RANGE HOSE PAGE
TYPE STRUCTURE

FKM HOSE FOR AGGRESSIVE

CHEMKING/10 D
CHEMICALS
HIGH TENSILE SYNTHETIC CORD 49

FKM HOSE FOR AGGRESSIVE HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
CHEMKING/10 SD
CHEMICALS WIRE 50
EN 12115 ANTI-STATIC EPDM
HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
CHEMICAL CHEMKING CHEMKING/16 SDE HOSE FOR CHEMICAL
WIRE & COPPER GROUNDING WIRES 51
PRODUCTS
EN 12115 ANTI-STATIC
HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
CHEMKING/16 SDA UHMWPE HOSE FOR CHEMICAL
WIRE & COPPER GROUNDING WIRES 52
PRODUCTS
EN 12115 FEP HOSE FOR HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
CHEMKING/16 SD
CHEMICAL PRODUCTS WIRE & COPPER GROUNDING WIRES 53
CHEMICAL HOSES

CHEMKING/10 D
FKM DELIVERY HOSE FOR AGGRESSIVE
CHEMICALS

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80049006* 6 1/4" 16.0 0.63 10 150 40 600 - - 270 0.18 SR+D08000 series
H80049008* 8 5/16" 18.0 0.71 10 150 40 600 - - 320 0.21 SR+D08000 series

49
H80049010* 10 3/8" 20.0 0.79 10 150 40 600 - - 380 0.25 SR+D08000 series
H80049012* 12 1/2" 23.0 0.91 10 150 40 600 - - 450 0.30 SR+D08000 series
H80049016* 16 5/8" 26.0 1.02 10 150 40 600 - - 530 0.35 SR+D08000 series
H80049019* 19 3/4" 29.0 1.14 10 150 40 600 - - 600 0.40 SR+D08000 series
H80049025* 25 1" 35.0 1.38 10 150 40 600 - - 750 0.50 SR+D08000 series
H80049031* 31 1.1/4" 44.0 1.73 10 150 40 600 - - 1,150 0.77 SR+D08000 series
H80049038* 38 1.1/2" 50.0 1.97 10 150 40 600 - - 1,330 0.89 SR+D08000 series
H80049051* 51 2" 65.0 2.56 10 150 40 600 - - 2,100 1.40 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-35 °C, -31 °F
• Hardwall delivery structure 100 °C, 212 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
TUBE
applications
• Long length assemblies available - Max length: 20m Black FKM rubber
(DN6 to DN10); 40m (DN12 to DN51)
REINFORCEMENT

High tensile synthetic cord

APPLICATIONS & FLUIDS
• Delivery of aggressive chemicals and acids in high COVER
concentrations Black synthetic CR rubber, chemical, oil, ozone and weathering
resistant

APPLICABLE SPECS
Manuli design, safety factor 4:1

STANDARD PACKAGING
Coil
 CHEMICAL HOSES

CHEMKING/10 SD
FKM SUCTION & DELIVERY HOSE FOR
AGGRESSIVE CHEMICALS

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80050019* 19 3/4" 31.0 1.22 10 150 40 600 85 3.35 740 0.49 SR+D08000 series
H80050025* 25 1" 37.0 1.46 10 150 40 600 112 4.41 960 0.64 SR+D08000 series
50

H80050031* 31 1.1/4" 44.0 1.73 10 150 40 600 144 5.67 1,250 0.83 SR+D08000 series
H80050038* 38 1.1/2" 51.0 2.01 10 150 40 600 171 6.73 1,400 0.93 SR+D08000 series
H80050051* 51 2" 67.0 2.64 10 150 40 600 229 9.02 2,150 1.43 SR+D08000 series
H80050063* 63 2.1/2" 80.0 3.15 10 150 40 600 317 12.48 2,600 1.73 SR+D08000 series
H80050076* 76 3" 92.0 3.62 10 150 40 600 380 14.96 3,200 2.13 SR+D08000 series
H80050102* 102 4" 118.0 4.65 10 150 40 600 510 20.08 4,600 3.07 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-35 °C, -31 °F
• Hardwall suction and delivery structure
100 °C, 212 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 40m Black FKM rubber

REINFORCEMENT

High tensile synthetic cord and steel helix body wire

APPLICATIONS & FLUIDS
• Suction & delivery of aggressive chemicals and acids in COVER
high concentrations Black synthetic CR rubber, chemical, oil, ozone and weathering
resistant

APPLICABLE SPECS
Manuli design, safety factor 4:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
CHEMICAL HOSES

CHEMKING/16 SDE
ANTI-STATIC EPDM SUCTION &
DELIVERY HOSE FOR CHEMICAL
PRODUCTS - EN 12115

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80061019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 700 0.47 SR+D08000 series
H80061025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 920 0.62 SR+D08000 series

51
H80061031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 1,090 0.73 SR+D08000 series
H80061038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,350 0.91 SR+D08000 series
H80061051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 1,840 1.24 SR+D08000 series
H80061063* 63 2.1/2" 80.0 3.15 16 240 64 960 300 11.81 2,540 1.71 SR+D08000 series
H80061076* 76 3" 92.0 3.62 16 240 64 960 350 13.78 3,200 2.15 SR+D08000 series
H80061102* 102 4" 118.0 4.65 12 180 48 720 450 17.71 4,430 2.98 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall suction and delivery structure
100 °C, 212 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black, smooth anti-static EPDM rubber

REINFORCEMENT
High tensile synthetic cord and steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

COVER
• Suction & delivery for chemicals as per EN 12115 Black synthetic CR rubber, fire-proof, anti-static (R< 1M Ohm/m),
specification chemical, ozone and weathering resistant
• Fireproof and anti-static cover (R < 106 Ohm/m)
APPLICABLE SPECS
EN 12115 (Grade Ω) / TRbF

STANDARD PACKAGING
Coil
 CHEMICAL HOSES

CHEMKING/16 SDA
ANTI-STATIC UHMWPE SUCTION &
DELIVERY HOSE FOR CHEMICAL
PRODUCTS - EN 12115

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1

H80047019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 710 0.47 SR+D08000 series
52

H80047025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 870 0.58 SR+D08000 series
H80047031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 1,070 0.71 SR+D08000 series
H80047038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,350 0.90 SR+D08000 series
H80047051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 2,290 1.53 SR+D08000 series
H80047063* 63 2.1/2" 80.0 3.15 16 240 64 960 300 11.81 2,510 1.67 SR+D08000 series
H80047076* 76 3" 92.0 3.62 16 240 64 960 350 13.78 3,080 2.05 SR+D08000 series
H80047102* 102 4" 118.0 4.65 12 180 48 720 450 17.71 4,510 3.01 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-20 °C, -4 °F
• Hardwall suction and delivery structure
100 °C, 212 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m Black conductive UHMWPE

REINFORCEMENT
High tensile synthetic cord and steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

• Suction & delivery for chemicals, oils, fuels and COVER

bunkering
Black synthetic CR rubber, fire-proof, anti-static (R<1G Ohm/m),
• Cover compound is tested an approved according to chemical, ozone and weathering resistant
EN 60079-0:2012 (R ≤ 109 Ohm/m)
• Hose structure designed to assure and maintain the APPLICABLE SPECS
requirements for the ATEX working conditions EN 12115 (Grade Ω/T) / TRbF / FDA; EN 60079-0

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
CHEMICAL HOSES

CHEMKING/16 SD
FEP SUCTION & DELIVERY HOSE FOR
CHEMICAL PRODUCTS - EN 12115

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80048012* 12 1/2" 25.0 0.98 16 240 64 960 84 3.31 320 0.21 SR+D08000 series
H80048019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 470 0.31 SR+D08000 series

53
H80048025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 580 0.39 SR+D08000 series
H80048031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 920 0.61 SR+D08000 series
H80048038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,200 0.80 SR+D08000 series
H80048051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 2,120 1.41 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-50 °C, -58 °F
• Hardwall suction and delivery structure 170 °C, 338 °F
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe TUBE
applications
White glossy non-conductive FEP (Fluorinated ethylene
• Max length: 61m propylene)

REINFORCEMENT
High tensile synthetic cord and steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding

• Suction & delivery for chemicals, petroleum and food

COVER
stuffs as per EN 12115 specifications
Black synthetic CR rubber, fire-proof, anti-static (R<106 Ohm/m),
• Hose tube is FDA approved chemical, ozone and weathering resistant

APPLICABLE SPECS
EN 12115 (Grade M)/ TRbF / FDA

STANDARD PACKAGING
Coil
 CHEMICAL HOSES
HOSES
54

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
 FOOD & BEVERAGE HOSES

All Manuli food and beverage hoses incorporate a taste- and

odour-free inner tube ideally suited for use with both alcoholic
and non-alcoholic liquids, as well as fatty and dry foods. All hoses
are compliant with the relevant food preparation equipment
regulations, and their high temperature resistance also allows
them to be sterilised at 110°C to eliminate the risk of cross-
contamination.
 HOSE HOSE
APPLICATION RANGE HOSE PAGE
TYPE STRUCTURE

HIGH TENSILE SYNTHETIC CORD & STEEL HELIX

BREWERS BREWERS/12 SD BEER, WINE & ALCOHOL HOSE
BODY WIRE 57

HIGH TENSILE SYNTHETIC CORD & STEEL HELIX

BREWERS BREWERS/12 SDC BEER, WINE & ALCOHOL HOSE
BODY WIRE 58
LIQUID FOOD
& BEVERAGE HIGH TENSILE SYNTHETIC CORD & STEEL HELIX
MILKYWAY MILKYWAY/ 10 SD MILK & FATTY FOODS HOSE
BODY WIRE 59

MULTI-PURPOSE LIQUID FOOD HIGH TENSILE SYNTHETIC CORD & 2 STEEL HELIX
MULTIFOOD MULTIFOOD/10 SD
HOSE BODY WIRES 60

LAYFLAT HOSE FOR DRY HIGH TENSILE SYNTHETIC CORD & COPPER
DRY FOOD ABRAFOOD ABRAFOOD/10
FOODS GROUNDING WIRES 61
FOOD & BEVERAGE HOSES

BREWERS/12 SD
BEER, WINE & ALCOHOL SUCTION
& DELIVERY HOSE

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80042019* 19 3/4" 32.0 1.26 12 180 36 540 80 3.15 780 0.52 SR+D08000 series
H80042025* 25 1" 38.0 1.50 12 180 36 540 115 4.53 920 0.61 SR+D08000 series

57
H80042031* 31 1.1/4" 46.0 1.81 12 180 36 540 145 5.71 1,190 0.79 SR+D08000 series
H80042038* 38 1.1/2" 52.0 2.05 12 180 36 540 180 7.09 1,480 0.99 SR+D08000 series
H80042051* 51 2" 65.0 2.56 12 180 36 540 245 9.65 1,890 1.26 SR+D08000 series
H80042063* 63 2.1/2" 81.0 3.19 12 180 36 540 340 13.39 2,910 1.94 SR+D08000 series
H80042076* 76 3" 95.0 3.74 12 180 36 540 410 16.14 3,410 2.27 SR+D08000 series
H80042102* 102 4" 122.0 4.80 12 180 36 540 580 22.83 4,960 3.31 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall suction and delivery structure
120 °C, 248 °F (sterilization at 110 °C/230 °F for 30 minutes)
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m White BIIR (butyl) rubber, food quality, odourless & taste-free

REINFORCEMENT

High tensile synthetic cord and steel helix body wire

APPLICATIONS & FLUIDS
COVER
• Suction & delivery for beer, wine, alcohol and soft drinks
Orange EPDM rubber, ozone, abrasion and weathering resistant

APPLICABLE SPECS
FDA title 21 art. 177.2600 (e) for liquid foods; BfR; ADI free;
CE 1935/2004; PHTHALATE free

STANDARD PACKAGING
Coil
 FOOD & BEVERAGE HOSES

BREWERS/12 SDC
BEER, WINE & ALCOHOL SUCTION
& DELIVERY HOSE, IMPROVED FLEXIBILITY

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80043031* 31 1.1/4" 46.0 1.81 12 180 36 540 115 4.53 1,040 0.69 SR+D08000 series
H80043038* 38 1.1/2" 52.0 2.05 12 180 36 540 140 5.51 1,510 1.01 SR+D08000 series
58

H80043051* 51 2" 65.0 2.56 12 180 36 540 195 7.68 1,950 1.30 SR+D08000 series
H80043063* 63 2.1/2" 81.0 3.19 12 180 36 540 270 10.63 3,100 2.07 SR+D08000 series
H80043076* 76 3" 95.0 3.74 12 180 36 540 285 11.22 3,600 2.40 SR+D08000 series
H80043102* 102 4" 122.0 4.80 12 180 36 540 335 13.19 5,100 3.40 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -40 °C, -40 °F
• Normal corrugated cover for improved flexibility 120 °C, 248 °F (sterilization at 110 °C/230 °F for 30 minutes)
• Compact, lightweight
• Robust hose structure for longer life in severe TUBE
applications
White BIIR (butyl) rubber, food quality, odourless & taste-free
• Long length assemblies available - Max length: 61m
REINFORCEMENT

High tensile synthetic cord and steel helix body wire

APPLICATIONS & FLUIDS
COVER
• Suction & delivery for beer, wine, alcohol and soft drinks
Orange, normal corrugated EPDM rubber, ozone, abrasion and
weathering resistant

APPLICABLE SPECS
FDA title 21 art. 177.2600 (e) for liquid foods; BfR; ADI free;
CE 1935/2004; PHTHALATE free

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FOOD & BEVERAGE HOSES

MILKYWAY/10 SD
MILK & FATTY FOODS SUCTION
& DELIVERY HOSE

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80044019* 19 3/4" 29.0 1.14 10 150 30 450 40 1.57 650 0.43 SR+D08000 series
H80044025* 25 1" 35.0 1.38 10 150 30 450 55 2.17 820 0.55 SR+D08000 series

59
H80044031* 31 1.1/4" 44.0 1.73 10 150 30 450 74 2.91 1,250 0.83 SR+D08000 series
H80044038* 38 1.1/2" 50.0 1.97 10 150 30 450 86 3.39 1,450 0.97 SR+D08000 series
H80044051* 51 2" 64.0 2.52 10 150 30 450 112 4.41 1,960 1.31 SR+D08000 series
H80044063* 63 2.1/2" 77.0 3.03 10 150 30 450 136 5.35 2,450 1.63 SR+D08000 series
H80044076* 76 3" 90.0 3.54 10 150 30 450 160 6.30 2,970 1.98 SR+D08000 series
H80044102* 102 4" 116.0 4.57 10 150 30 450 380 14.96 6,700 4.47 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall suction and delivery structure
80 °C, 176 °F (sterilization at 110°C/230°F for 30 minutes)
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m White NBR rubber, food quality odourless and taste-free

REINFORCEMENT

High tensile synthetic cord and steel helix body wire

APPLICATIONS & FLUIDS
COVER
• Suction & delivery of milk and fatty foods
Blue NBR rubber, ozone, abrasion and weathering resistant

APPLICABLE SPECS
FDA title 21 art. 177.2600 (f) for fatty foods; BfR; ADI free;
D.M. 21/03/73; CE 1935/2004; PHTHALATE free

STANDARD PACKAGING
Coil
 FOOD & BEVERAGE HOSES

MULTIFOOD/10 SD
MULTI-PURPOSE LIQUID FOOD SUCTION
& DELIVERY HOSE

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80045038* 38 1.1/2" 50.0 1.97 10 150 30 450 150 5.91 1,440 0.96 SR+D08000 series
H80045051* 51 2" 63.0 2.48 10 150 30 450 205 8.07 2,100 1.40 SR+D08000 series
60

H80045063* 63 2.1/2" 78.0 3.07 10 150 30 450 285 11.22 2,530 1.69 SR+D08000 series
H80045076* 76 3" 91.0 3.58 10 150 30 450 390 15.35 3,220 2.15 SR+D08000 series
H80045102* 102 4" 120.0 4.72 10 150 30 450 500 19.69 4,630 3.09 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall suction and delivery structure
140 °C, 284 °F (sterilization at 110°C/230°F for 30 minutes)
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m White EPDM rubber, food quality odourless and taste-free

REINFORCEMENT

High tensile synthetic cord and 2 steel helix body wires

APPLICATIONS & FLUIDS
• Suction & delivery multi-purpose hose, COVER
• Fatty foods, wine, beer, potable water etc. Blue EPDM rubber, ozone, abrasion and weathering resistant

APPLICABLE SPECS
FDA title 21 art. 177.2600 (f) for fatty foods; BfR; ADI free;
D.M. 21/03/73; CE 1935/2004; PHTHALATE free

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FOOD & BEVERAGE HOSES

ABRAFOOD/10
LAYFLAT HOSE FOR DRY FOODS
(GRAINS, SEED, RICE ETC.)

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80046102* 102 4" 112.0 4.41 10 150 30 450 - - 2,430 1.62 SR+D08000 series
H80046152* 152 6" 166.0 6.54 10 150 30 450 - - 4,790 3.19 MARKET FITTINGS

61
KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE
-40 °C, -40 °F
• Layflat delivery structure
80 °C, 176 °F (sterilization at 110°C/230°F for 30 minutes)
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m White NR rubber, food quality odourless and taste-free

REINFORCEMENT
High tensile synthetic cord and 2 crossed copper wires for hose
APPLICATIONS & FLUIDS grounding

• Delivery hose for dry and abrasive food stuffs (eg: grains, COVER
seed, rice, sugar, flour and animal food) Black CR rubber, fire proof, anti-static (R<1G Ohm/m), chemical,
ozone and weathering resistant
• Cover compound is tested an approved according to
EN 60079-0:2012 (R ≤ 109 Ohm/m)
APPLICABLE SPECS
• Hose structure designed to assure and maintain the
FDA title 21 art. 177.2600 (a, b, c, d) for dry foods; BfR; ADI free;
requirements for the ATEX working conditions D.M. 21/03/73; CE 1935/2004; PHTHALATE free; EN 60079

STANDARD PACKAGING
Coil
 FOOD & BEVERAGE HOSES
HOSES
62

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
 ABRASIVE FLUID HOSES

The abrasive fluid hose family from Manuli is specifically designed

to withstand the damaging action of the fluids they convey. Ranging
from sand and other dry materials, to high-pressure concrete
slurries, the Manuli abrasive fluid hose family has you covered.
 HOSE HOSE
APPLICATION RANGE HOSE PAGE
TYPE STRUCTURE

LAYFLAT HOSE FOR ABRASIVE

ABRADRY ABRADRY
DRY MATERIALS
HIGH TENSILE SYNTHETIC CORD 65
ABRASIVE
SOLIDS SANDBLASTING & ABRASIVE
SANDSERVICE SANDSERVICE/21 D/4
FLUID HOSE
HIGH TENSILE SYNTHETIC CORD 66

ABRASIVE FLUID HOSE, HEAVY HIGH TENSILE SYNTHETIC CORD,COPPER GROUNDING

ABRASERVICE/10 D
DUTY WIRES 67

ABRASIVE FLUID HOSE, HEAVY HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
ABRASERVICE/10 SD
DUTY WIRE & COPPER GROUNDING WIRES 68

ABRASIVE REVERSE CYCLE DRILLING HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
ABRASERVICE ABRASERVICE/35 SD
HOSE WIRE 69
FLUIDS
ABRASERVICE/40 D PLASTER SPRAYING HOSE HIGH TENSILE SYNTHETIC CORD 70

HIGH-PRESSURE CONCRETE
ABRASERVICE/100 D
PUMPING HOSE
HIGH TENSILE STEEL CORD 71
ABRASIVE FLUID HOSES

ABRADRY
LAYFLAT DELIVERY HOSE FOR CONCRETE,
SAND, GRAVEL & OTHER ABRASIVE
DRY MATERIALS

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80051090* 90 3-35/64” 100.0 3.94 6 90 18 270 - - 1,250 0.83 MARKET FITTINGS
H80051102* 102 4" 112.0 4.41 4 60 12 180 - - 1,390 0.93 MARKET FITTINGS

65
H80051127* 127 5" 137.0 5.39 4 60 12 180 - - 1,720 1.15 MARKET FITTINGS
H80051152* 152 6" 162.0 6.38 4 60 12 180 - - 2,050 1.37 MARKET FITTINGS
H80051203* 203 8" 213.0 8.39 4 60 12 180 - - 2,740 1.83 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Layflat delivery structure -40 °C, -40 °F
• Compact, lightweight and flexible 70 °C, 158 °F
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m
Black NR/SBR rubber
(DN90 - DN102); 30.5m (DN127 - DN203)
REINFORCEMENT

High tensile synthetic cord

APPLICATIONS & FLUIDS
• Delivery hose for dry abrasive materials, concrete, sand COVER
and gravel Black synthetic SBR/NR/PVC rubber, anti-static, abrasion and
weathering resistant

APPLICABLE SPECS
DIN 53516 70 ±5mm3

STANDARD PACKAGING
Coil
 ABRASIVE FLUID HOSES

SANDSERVICE/21 D
SANDBLASTING & ABRASIVE FLUID HOSE

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80019019* 19 3/4” 32.8 1.29 21 300 63 910 90 3.54 524 0.35 SR+D08000 series
H80019025* 25 1” 39.2 1.54 21 300 63 910 115 4.53 668 0.45 SR+D08000 series
66

H80019031* 31 1.1/4” 49.0 1.93 21 300 63 910 150 5.91 1,072 0.72 SR+D08000 series
H80019038* 38 1.1/2” 56.8 2.24 21 300 63 910 180 7.09 1,575 1.06 SR+D08000 series
H80019051* 51 2” 71.4 2.81 21 300 63 910 240 9.45 2,326 1.56 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Softwall delivery structure 80 °C, 176 °F
• Highly robust construction
• Long life in extreme conditions
TUBE
• Long length assemblies available - Max length: 61m
Black, NR/SBR rubber, abrasion resistant thick tube

REINFORCEMENT
APPLICATIONS & FLUIDS High strength synthetic cord

• Sand blasting or transfer of highly abrasive materials COVER

such as grit and gravel. Black, NR/SBR rubber, abrasion resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ABRASIVE FLUID HOSES

ABRASERVICE/10 D
ABRASIVE FLUID HOSE, HEAVY DUTY

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80021051* 51 2” 67.8 2.67 10 150 30 450 - - 1,656 1.11 SR+D08000 series
H80021076* 76 3” 96.4 3.80 10 150 30 450 - - 3,151 2.11 SR+D08000 series

67
KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE
-40 °C, -40 °F
• Softwall delivery structure
80 °C, 176 °F
• High resistance to continuous abrasion
• Long length assemblies available - Max length: 61m
TUBE
Black, NR/SBR rubber, abrasion resistant thick tube

APPLICATIONS & FLUIDS REINFORCEMENT

High strength synthetic cord, 2 crossing copper wires for
grounding
• Dry and liquid abrasive mix transfer
COVER
Black, NR/SBR rubber, abrasion resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 ABRASIVE FLUID HOSES

ABRASERVICE/10 SD
ABRASIVE FLUID HOSE, HEAVY DUTY

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80012051* 51 2” 69.6 2.74 10 150 30 450 200 7.87 2,392 1.60 SR+D08000 series
H80012063* 63 2.1/2” 85.5 3.37 10 150 30 450 250 9.84 3,636 2.44 SR+D08000 series
68

H80012076* 76 3” 98.4 3.87 10 150 30 450 300 11.81 4,590 3.08 SR+D08000 series
H80012102* 102 4” 124.6 4.91 10 150 30 450 450 17.72 6,019 4.04 SR+D08000 series
H80012127* 127 5” 149.0 5.87 10 150 30 450 600 23.62 7,250 4.87 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• Hardwall suction and delivery structure -40 °C, -40 °F
• High resistance to continuous abrasion 80 °C, 176 °F
• Long length assemblies available - Max length: 61m
(DN51 - DN102); 30.5m (DN127) TUBE
NR/SBR rubber, abrasion resistant, thick tube

APPLICATIONS & FLUIDS REINFORCEMENT

High tensile synthetic cord and steel helix body wire, and 2
crossing copper wires for grounding
• Dry and liquid abrasive mix transfer
COVER
Black NR/SBR abrasion resistant rubber

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ABRASIVE FLUID HOSES

ABRASERVICE/35 SD
REVERSE CYCLE DRILLING HOSE

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80018063* 63 2.1/2” 89.7 3.53 35 508 105 1,523 250 9.8 4,327 2.91 MARKET FITTINGS
H80018076* 76 3” 104.7 4.12 35 508 105 1,523 300 11.8 5,714 3.84 MARKET FITTINGS

69
H80018102* 102 4” 136.0 5.35 35 508 105 1,523 400 15.75 9,272 6.23 MARKET FITTINGS

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

• High robustness of the hose structures -40 °C, -40 °F
• Long lasting in severe applications 80 °C, 176 °F
• High abrasion resistance of the tube compound
• Max Length: 61m TUBE
NR/SBR rubber, antistatic rubber, abrasion resistant, thick tube

APPLICATIONS & FLUIDS REINFORCEMENT

High tensile synthetic cord and steel helix body wire
• Drilling slurry with stones and mixed materials during
reverse cycle drilling operations
COVER
Black antistatic abrasion resistance NR/SBR

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil
 ABRASIVE FLUID HOSES

ABRASERVICE/40 D
PLASTER SPRAYING HOSE

TECHNICAL DATA
HOSES

PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80014019* 19 3/4” 32.5 1.28 40 580 120 1,740 150 5.90 540 0.36 SR+D08000 series
H80014025* 25 1” 39.3 1.55 40 580 120 1,740 170 6.69 682 0.46 SR+D08000 series
70

H80014031* 31 1.1/4” 45.2 1.78 40 580 120 1,740 200 7.87 883 0.59 SR+D08000 series
H80014035* 35 1.3/8” 51.0 2.01 40 580 120 1,740 200 7.87 1,101 0.74 SR+D08000 series
H80014038* 38 1.1/2” 54.6 2.15 40 580 120 1,740 230 9.05 1,236 0.83 SR+D08000 series
H80014051* 51 2” 67.8 2.67 40 580 120 1,740 270 10.62 1,852 1.24 SR+D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Softwall delivery structure
80 °C, 176 °F
• High resistance to continuous abrasion
• Long length assemblies available - Max length: 61m
TUBE
Black, NR/SBR rubber, abrasion resistant thick tube

APPLICATIONS & FLUIDS REINFORCEMENT

High strength synthetic cord
• Mortar, gypsum, grout spraying at open air, indoor or
underground construction sites, etc. COVER
Black, NR/SBR rubber, abrasion resistant

APPLICABLE SPECS
Manuli design, safety factor 3:1

STANDARD PACKAGING
Coil

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ABRASIVE FLUID HOSES

ABRASERVICE/100 D
DELIVERY HOSE FOR HIGH-PRESSURE
CONCRETE PUMPING

TECHNICAL DATA

HOSES
PART. REF HOSE SIZE R.O.D O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80015051* 51 2" 66.0 2.59 70.6 2.78 100 1,450 250 3,626 250.0 9.84 2,991 2.01 FF + D08000 series
H80015063* 63 2.1/2" 78.4 3.08 83.0 3.27 100 1,450 250 3,626 320.0 12.59 3,688 2.48 FF + D08000 series

71
H80015076* 76 3" 90.8 3.57 95.4 3.76 100 1,450 250 3,626 380.0 14.96 4,404 2.96 FF + D08000 series
H80015089* 89 3.1/2" 105.0 4.13 109.6 4.31 100 1,450 250 3,626 450.0 17.71 5,353 3.6 FF + D08000 series
H80015102* 102 4" 117.0 4.6 122.5 4.82 100 1,450 250 3,626 500.0 19.68 6,363 4.28 FF + D08000 series
H80015127* 127 5” 147.0 5.79 153.0 6.02 100 1450 250 3625 630 24.80 11,000 7.39 FF + D08000 series

KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
• Hardwall delivery structure 80 °C, 176 °F
• Robust hose structure for longer life in severe
applications
TUBE
• High abrasion resistance
• Integrated crimped fitting solution Black, NR/SBR anti-static rubber, abrasion resistant thick tube
• Long length assemblies available - Max length: 40m
REINFORCEMENT

High tensile steel cord

APPLICATIONS & FLUIDS
• High-pressure pumping of concrete, plaster, bentonite COVER
etc. in construction Black NR/SBR rubber, anti-static, abrasion and weathering
resistant

APPLICABLE SPECS
Manuli design safety factor 2.5:1

STANDARD PACKAGING
Coil
 ABRASIVE FLUID HOSES
HOSES
72

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FITTINGS

The Manuli Hydraulics fittings range for crimped hose connections comprises 2 families, the Serrated Range
and Full Flow:

• Serrated Range (SR) - universal solution for low and medium pressure hose lines
• Full Flow (FF) - Fittings for high pressure lines, designed to provide low resistance to flowing of
concrete during working operations (such as Abraservice/100 D)
Theses fittings are available upon request. Please contact your local Manuli Hydraulics representative with
your requirements.

DN 16 19 22 25 31 38 51 63 76 102
Inch /8”
5
¾” /8”
7
1” 1¼” 1½” 2” 2½” 3” 4”

FITTINGS
Size -10 -12 -14 -16 -20 -24 -32 -40 -48 -64

FERRULES

SERRATED

73
FULL FLOW

BEVELLED TO WELD
EN 14420-4, SERIES 1

EN 14420-4, SERIES 2

BSP FEMALE FRONT SEAL FULL HEXAGON

EN 14420-5 / DIN 2817, TYPE A

BSP FEMALE FRONT SEAL GROOVE HEXAGON

EN 14420-5 / DIN 2817, TYPE B

BSP MALE FRONT SEAL

EN 14420-5 / DIN 2817

FIXED FLANGE
EN 14420-4, PN16
ASA 150, ASME B16.5
ASA 300, ASME B16.5

SWIVEL FLANGE

EN 14420-4, PN16

VICTAULIC GROOVED END

SERRATED

FULL FLOW

CALIFORNIA RAISED END

SERRATED

FULL FLOW
 ASSEMBLY MACHINES

As one of the world’s leading suppliers of hose connector solutions Manuli Hydraulics is able to offer some of
the most technically advanced, robust and reliable hose assembly equipment on the market today.

With a product range that encompasses all stages of the hose assembly process, the Manuli range of
machines can cater for everything from on-site repairs to high volume, large-bore production cells.

Full details of the entire range can be found in the Manuli Equipment Catalogue, but some machines that
are specifically suited to industrial hose assembly operations can be found below:

DECOILER
INDUSTRIAL DECOILER
• Max. Capacity: 6”
• Adjustable centre pins
• Remote start / stop controller
MACHINES

• High torque 3kW motor with speed control

CUTTING MACHINES
M75 CUT
• Max. Capacity: 3”
• Powerful 7.5kW motor
74

• High visibility
• Integrated safety cover

M90 CUT
• Max. Capacity: 3½”
• Heavy duty design
• Electronic soft start
• Integrated smoke extraction

MDH 15 CUT
• Max. Capacity: 10”
• Sensor for blade tensioning
• Water cooling system
• Automatic cutting cycle

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ASSEMBLY MACHINES

INSERT PUSHING MACHINES

M2000 INS
• Max. Capacity: 6”
• Compact design
• Sturdy
• Available with both automatic and manual operation

CRIMPING MACHINES
MB 450-200
• Max. Capacity: 6”
• Crimp force up to 450 tonnes
• Ergonomic and robust

MACHINES
• Large opening and long master dies
MS 320 OPEN HEAD
• Max. Capacity: 6”
• Crimp force up to 320 tonnes
• Lateral opening and no limit on end connector dimension

75
• Separate power pack and integrated safety system
MS 550 / MS 550-16
• Max. Capacity: 12” / 16”
• Crimp force up to 550 tonnes
• Safe Crimp System (SCS) control
• Step crimping capability
 SELECTING THE CORRECT HOSE

The Manuli Hydraulics Industrial Hoses range is a specialised selection of products dedicated to the
conveyance of specific substances in non-hydraulic applications. Each hose type has been designed to cope
with the unique rigours associated with the transport of substances as diverse as fluids, solids and gases. This
dedicated range of products is made from the highest quality materials using state-of-the-art manufacturing
techniques to ensure quality, reliability and long service life.
The Manuli Hydraulics Industrial Hoses range comprises the following product categories:
WATER, AIR & STEAM HOSES - Dedicated to the transport of water, steam and compressed air.
FUEL HOSES - Dedicated to the transport of fuels, oils and fluids with an aromatic content of up to 50%.
CHEMICAL HOSES - Dedicated to the transport of highly aggressive chemicals.
FOOD & BEVERAGE HOSES - Dedicated to the transport of beverages and solid and liquid foodstuffs.
ABRASIVE HOSES - Dedicated to the transport of abrasive fluids such as concrete, plaster, cement and dry
powders.
CHOOSING THE CORRECT HOSE
In order to choose a hose suitable for a specific use it is necessary to determine at least the following basic
points:
APPLICATION
Manuli Industrial Hoses have been designed to suit specific types of applications such as water, air, fuel, etc,
APPENDICES

which should be considered when selecting a hose type.

DELIVERY OR SUCTION
Delivery and suction of materials require different properties in hose structure. In addition to the high strength
cords of delivery hoses, suction hoses have an interior helical wire to prevent hose collapse during suction.
PRESSURE
The maximum working pressure of the system should be evaluated when selecting an industrial hose. The
76

working pressure allowance should include any peaks and surges that can occur during normal usage.
FLUID COMPATIBILITY
The nature, designation, concentration, temperature and state (liquid, solid, gaseous) of the conveyed fluid
must be determined. In the case of solid substances the granulometry, density and quantity of the solid
substance should be considered as well as the nature, speed and flow of the fluid carrying it.
TEMPERATURE
Ambient temperatures should be considered when selecting hose types.
ENVIRONMENT AND LOCATION
The environmental factors which could affect hose performance and service life should be evaluated when
selecting a hose. Factors such as humidity, exposure to atmospheric agents etc. should be considered.
Environmental conditions such as UV rays, ozone, sea water, chemicals and aggressive elements can cause
premature degradation of the hose. Also consider whether the hose will be located on the ground, suspended
or immersed in a liquid.
MECHANICAL STRESS
The minimum bend radius (ref. product data sheet) required must be evaluated as well as any stresses
related to traction, torsion, bending, vibration, compression, deflection and longitudinal or transversal loads.
ABRASION RESISTANCE
Manuli Industrial Hoses are manufactured to ensure a good overall resistance to abrasion. However, if the
hose is to be used in conditions where there may be excessive corrosion, dragging or impact then it is
advisable to use additional protection to prevent untimely wear of the cover.
FITTINGS
In order to guarantee safe and reliable performance, the fittings used must be selected according to the
manufacturer’s recommendation(s). The complete assembly must guarantee the working pressure listed by
the hose manufacturer and fittings must be crimped in accordance to the latest published specifications.

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY

POLYMERS USED IN INDUSTRIAL HOSES

MAIN CHARACTERISTICS AND RESISTANCE INFORMATION

Resistance to:

Physical Strength

Gas permeation

temperatures

temperatures
Mineral oils
Weather /

Gasolines
Abrasion

Ozone

High

Low
International Common /
Elastomer Symbol Trade Name

Natural Rubber NR Gum Rubber E E P G P P F G

Acrylonitrile-Butadiene NBR Nitrile (Buna-N) G F P G E E G F
Styrene-Butadiene SBR Buna-S E E P G P P F G
Polychloroprene CR Neoprene E E G G G F G G
Chlorinated Isobutylene-Isoprene CIIR Chloro Butyl F P E E P P E E
Bromobutyl rubber BIIR Bromo Butyl G P E E P P E E
Chlorosulfonated Polyethylene CSM Hypalon G F E E G F E G
Chlorinated Poyethylene CM CPE G F E G G G E G
Ethylene Propylene Diene EPDM EPDM G F E F P P E E

APPENDICES
Ethylene Propylene Copolymer EPM EPM G F E G P P E E
Ultra High Molecular Weight Polyethylene UHMWPE UHPE G E E G G G F G
Polyester resin PET PET G E G G G G G G
Polyamid Resin PA Nylon G E E E E E E G
Polyurethane PU Urethane E E G F G F G E
Polyvinyl Chloride (plasticized) PVC PVC F G E G G G P P
Fluorinated Ethylene Propylene PTFE Teflon G F E E E E E G

77
Silicone VMQ Silicone G G G G F F E E
Fluoropolymer FKM Viton G G E E E E E E
Carboxylated Nitrile Rubber X-NBR Carboxylated Nitrile G E G G E E G G
Fluorinated ethylene propylene FEP FEP G G G G E E E G

LEGEND (IN ORDER OF PERFORMANCE)

E - Excellent
G - Good
F - Fair
P - Poor

CHEMICAL COMPATIBILITY CHART FOR INDUSTRIAL HOSES

BEHAVIOUR TO CHEMICALS FOR INDUSTRIAL HOSES APPLICATIONS

BASED ON LITERATURE DATA

Tube polymers in contact with the fluid

Manuli Hydraulics Industrial Hoses are designed for fluid transfer applications with a specific transfer fluid which is specified in the
relevant hose data sheet. They are not intended for diversified applications with various chemicals.

The following recommendations regarding generic chemicals are based on literature data regarding the polymers used for the tube
compound. The actual field results of the fluid conveyed in the hose should be carefully tested and field validated by users.
 FLUID COMPATIBILITY

LEGEND OF HOSE TYPES BY TUBE COMPOUNDS

Tube compound categories Hose Types

FUELSERVICE/5 SDC, FUELSERVICE/10 D, FUELSERVICE/10 SD,

FUELSERVICE/16 D, FUELSERVICE/16 SD, FUELSERVICE/20 D,
FUELSERVICE/21 D, FUELSERVICE/21 SD, FUELDISPENSER/D,
Nitrile (NBR)
FUELDISPENSER/SD, FUELTRUCK/16 D, FUELTRUCK/16 SD,
FUELFLEX/17 SDC, PROGAS LPG D, PROGAS LPG SD
MILKYWAY/10 SD,

MULTISERVICE/12 D, MULTISERVICE/12 SD, MULTISERVICE/21 D,

Styrene-butadiene (SBR) MULTISERVICE/21 SD, AIRSERVICE, AIRSERVICE/27,
WATERFLAT 5/10,
ABRAFOOD/10, ABRADRY, SANDSERVICE/21 D,
Natural rubber (NR) ABRASERVICE/10 D, ABRASERVICE/10 SD, ABRASERVICE/35 SD,
ABRASERVICE/40 D, ABRASERVICE/100 D
Vinyl-Methyl-Silicone (VMQ) COOLER/5
GLACIER/60, GLACIER/100, MULTIFOOD/10 SD,
Ethylene-Propylene-Diene-Monomer (EPDM)
CHEMKING/16 SDE, COOLSERVICE/G
Polychloroprene (CR) FIREX
APPENDICES

Ethylene-Propylene (EPM) AIRKING/40, STEAMER/18, STEAMER/18 OR, STEAMSAFE/7

Carboxylated Nitrile (X-NBR) MUDSERVICE/28 D

Fluoroelastomer (FKM) CHEMKING/10 D, CHEMKING/10 SD

Ultra-High Molecular Weight Polyethylene (UHMWPE) CHEMKING/16 SDA

Fluorinated-Ethylene-Propylene (FEP) CHEMKING/16 SD

78

Butyl (BIIR) BREWERS/12 SD, BREWERS/12 SDC

LEGEND OF RATINGS

E = Excellent - Small or negligible changes of compound properties: no problem for use. Service life can exceed the expectations.

G = Good - There are only minor changes of some compound properties. Service life is normally in line with state of the art (standard)
expectations.

FT = Field Test recommended - A field test is recommended to allow the end user to either validate the selection in the actual working
conditions or to reject the selection. Compatibility data shows significant changes on some compound properties, service life can be
reduced. Higher durability can be achieved with reduced severity of working conditions (temperature in particular) or with an upgraded
hose selection. After the results of the recommended field test, if the end user decides to use the selected hoses under his validation,
the end users assumes all responsibility with regard to any possible effects and consequences arising out of the using of hoses in the
actual working conditions and Manuli Hydraulics cannot be held responsible for any claims in relation to or connected with the hoses
for which it was recommended to perform a field test.

X = Not recommended - Unsuitable, severe effects on physical properties.

REMARKS
O-Rings used with couplings must also be considered for chemical compatibility with the fluid to be conveyed. This includes fittings
containing internal O-Rings. Standard O-Ring of Manuli Hydraulics fittings are made of Nitrile rubber (NBR). If you use special fluids
or very high temperatures, different O-Ring materials should be used, contact Manuli Hydraulics for specific information.

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY

COMPATIBILITY BEHAVIOUR OF TUBE POLYMERS CONTACTING FLUIDS (BASED ON LITERATURE DATA)

CHLOROPRENE
NBR / X-NBR

EPDM / EPM
CHEMICALS

UHMWPE
VMQ

FKM
SBR

CIIR

FEP
NR
ACETALDEHYDE X FT FT G G G E G E E
ACETHIL ACETONE X E X X E - X X E X
ACETIC ACID 10% G E G FT E G FT G E E
ACETIC ACID 50% X FT X X G G FT G E FT
ACETIC ACID GLACIAL 100% X X X X FT G FT X E G
ACETIC ANHYDRIDE 50% FT FT G X E G E X E FT
ACETONE X FT FT X E E G X E E
ACETYLENE (GAS) E E E G E G E E E E
ACRYLIC NITRATE X E G - E - G G E E
ADIPIC ACID E E E - E - - E E E
AIR ATMOSPHERIC UP TO °C 70 80 70 70 120 120 175 200 100 90
AIR COMPRESSED UP TO °C X 80 X X X 120 175 200 100 90
ALIMENTARY VINEGAR E E E FT E - E FT E E
ALLYL CHLORIDE X X X - X - E - E X

APPENDICES
ALUMINIUM ACETATE (AQUEOUS) E E E FT E E X - E E
ALUMINIUM AND POTASSIUM SULPHATE (DOUBLE) G E E G E E G E E E
ALUMINIUM CHLORIDE (AQUEOUS) E E E G E e X E E E
ALUMINIUM FLUORIDE E E E FT E E E E E E
ALUMINIUM HYDROXIDE E E E G E - E E E E
ALUMINIUM NITRATE (AQUEOUS) E E E G E E G - E E
ALUMINIUM PHOSPHATE (AQUEOUS) E E E - E - E E E E
A AMMONIA (AQUEOUS) E E E FT E G E E E E

79
AMMONIA (LIQUID) G G G FT E G FT X E E
AMMONIA 20°C (VAPOUR) E E E - E G E E E E
AMMONIUM CARBONATE (AQUEOUS) G E G - E E G E E E
AMMONIUM CHLORIDE (AQUEOUS) E E E G E E E E E E
AMMONIUM DIPHOSFATE (AQUEOUS) E E E - E E G E E E
AMMONIUM METAPHOSPHATE E E E - E E E E E E
AMMONIUM NITRATE E E E - E E G - E -
AMMONIUM NITRATE (AQUEOUS) E E E FT E E E E E E
AMMONIUM PERSULPHATE (AQUEOUS) E E E - E E E - E E
AMMONIUM PHOSPHATE (AQUEOUS) E E E G E E G E E E
AMMONIUM SULPHATE E E E G E E E E E E
AMMONIUM THIOCYANATE E E E - E E E - E E
AMYL CHLORIDE X X X X X X FT - E X
AMYLIC ALCOHOL E E E FT E G E E E E
ANILINE X FT X X X G G G E E
ANIMAL GLUE E E G - FT - E E E E
ANTIMONY CHLORIDE 50% FT E E - E X X E E E
AQUA REGIA G X X X FT - FT G E X
ARGON (GAS) E E E G E E E E E E
ARSENIC ACID E E G FT E E E E E E
ASPHALT G G X X X X G E E E
BARIUM CHLORIDE (AQUEOUS) E E E G E E E E E E
BARIUM HYDROXIDE E E E G E E E E E E
BARIUM SULPHATE E E E G E - E E E E
BENZALDEHYDE X X FT X G E FT G E -
B BENZENE, BENZOL X X X X X X X G E X
BENZOIC ACID (AQUEOUS) X X X X X X X E E E
BENZYL ALCOHOL X FT G X E - E E E FT
BENZYL BENZOATE X X X - G G - E E -
BENZYL CHLORIDE X FT FT - X X G E E FT
 FLUID COMPATIBILITY

COMPATIBILITY BEHAVIOUR OF TUBE POLYMERS CONTACTING FLUIDS (BASED ON LITERATURE DATA)

CHLOROPRENE
NBR / X-NBR

EPDM / EPM
CHEMICALS

UHMWPE
VMQ

FKM
SBR

CIIR

FEP
NR
BISMUTH CARBONATE E E E - E E E E E E
BISULPHATE (SO2 SOLUTION) FT - E - E - - E E E
BITUMEN UP TO °C 120 X X - X X X 180 130 X
BORIC ACID (AQUEOUS) E E E - E E FT E E E
BRINE (KITCHEN SALT SOLUTION) E E E G E E E E E E
BROMINE X X X X X X X E E X
BROMINE WATER X X X X X X X E E X
BROMOBENZENE X X X X X - X E E X
BROMOCHLOROMETHANE X X X X FT X X E E X
BUTADIENE X G X X FT X - E E E
BUTANE (GAS) E E G X G X FT E E X
BUTANE (LIQUID) E E X X X X FT E E E
B
BUTIL ACETATE X X FT X G G FT X E -
BUTYL ALCOHOL (BUTANOL) E E E G E G G E E X
APPENDICES

BUTYL AMINE FT X X - X X G X E -
BUTYL BENZOATE X X X - E X - E E -
BUTYL ETHER E G X X FT FT FT - E E
BUTYL GLYCOLE E FT E - E G G E E E
BUTYL OIL - X X X G - - E E -
BUTYL PHTALATE (DIBUTYL PHTHALATE) FT FT FT X G - G G E FT
BUTYL STEARATE G X X X FT X E E E X
BUTYLENE (LIQUID) G FT FT - G X - E E X
80

BUTYRALDEHYDE (BUTIRIC ALDEHYDE) FT G FT X G E FT - E E

BUTYRIC ACID (AQUEOUS) X FT X G G G G FT E X
CALCIUM ACETATE G G E X E E - X E E
CALCIUM BICARBONATE E E E E E E E E E E
CALCIUM BISULPHATE (AQUEOUS) E E E G E E E E E E
CALCIUM BISULPHITE FT G G G E E G E E E
CALCIUM CARBONATE E E E G E E E E E E
CALCIUM CHLORIDE (AQUEOUS) E E E G E E E E E E
CALCIUM HYDROXIDE (AQUEOUS) G E E G E E G E E E
CALCIUM NITRATE E E E G E E G E E E
CALCIUM OXIDE E E E - E E G E E E
CALCIUM SULPHATE (AQUEOUS) E E E G E E E E E E
CALCIUM SULPHIDE G E G G E G G E E -
CARBON OXIDE (CARBON MONOXIDE) G G G - FT E E E E E
CARBONIC ACID GAS E E E G E E E E E E
CARBONIC ANHYDRIDE E G X X G E E E E E
C CARBONIC GAS E E E - E - E E E E
CASTOR OIL E E E - G FT E E E FT
CELLULOSE ACETATE E FT FT X G G E - E E
CHLORIC ACID (AQUEOUS) G FT E - E E E E E E
CHLORINATED WATER 3% FT G FT FT FT E G G E G
CHLORINE (DRY) FT X G X FT X X E E X
CHLORINE (HUMID) X X FT X FT - X E E X
CHLORO PEROXIDE X X X - FT - FT E E X
CHLORODIPHENIL X X X - X - G E E E
CHLOROFORM (TRICHLOROMETHANE) X X X X X X X E E X
CHLOROSULFONIC ACID X X X X X X X X E X
CHROMIC ACID 10% X X X X G X FT E E E
CHROMIC ACID 25% X X X X G X X E E E
CHROMIC ACID 50% X X X X G X X E E FT
CITRIC ACID E E G G E G E E E E

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY

COMPATIBILITY BEHAVIOUR OF TUBE POLYMERS CONTACTING FLUIDS (BASED ON LITERATURE DATA)

CHLOROPRENE
NBR / X-NBR

EPDM / EPM
CHEMICALS

UHMWPE
VMQ

FKM
SBR

CIIR

FEP
NR
COAL TETRACHLORIDE FT X X - X X X E E X
COCONUT OIL E G X X E FT E E E X
COLZA OIL G G X X E - X E E -
COPPER CHLORIDE E E E FT E E E E E E
COPPER CYANIDE E E E FT E E E E E E
COPPER HYDROXIDE X G E - E - E - E E
COPPER NITRATE E E E FT E - E E E E
COPPER SULPHATE (AQUEOUS) E E E FT E G E E E E
C
CORN OIL E G X X G FT E E E X
COTTONSEED OIL E G X X E FT G E E E
CREOSOTE X X X X G X G E E X
CRESOLS FT FT X X X - G E E X
CRUDE OIL FT X X X X X X E E FT
CYCLOEXANE (HEXAIDROBENZENE) E X X X X X X E E E

APPENDICES
CYCLOEXANOL G E G X X - G E E E
CYCLOHEXANONE X X X X FT G G X E E
DECAHYDRONAPHTALENE (DECALIN) G X X X X X X E E E
DETERGENTS SYNTHETIC 20°C E E E FT E E E E E E
DIACETONE ALCOHOL X FT X FT E E E X E G
DIAMINE ETHYLENE G E E FT E - FT G E E
DIBENZYL ETHER X X X X G G G E E -
DIBUTHYL PHTLATE G FT FT X X FT - G E FT

81
DIBUTHYL SEBACATE X X X X G FT E G E E
DIBUTHYLAMINE X X X X X X FT X E -
DIBUTHYLKETONE X FT FT X G G - - E G
DICHLORBENZENE FT X X X X X X E E FT
DICHLORETHYLENE X X X X X X X G E X
DICHLOROMETHANE FT X X X X X X G E X
DIESEL FUEL (50°c) - FLUID TRANSFER ONLY E FT X X X X X E E X
DIESEL FUEL BIO RME E FT X X X X X E E X
DIESEL OIL G FT X X X X X E E G
DIETHANOLAMINE FT - - FT E E - - E E
D DIETHYL ESTER OF ADIPIC ACID X FT FT - E - - X E -
DIETHYL ETHER X FT X X X - X X E X
DIETHYLAMINE FT FT G FT G - G X E FT
DIETHYLBENZENE X X X X X X X - E -
DIETHYLENE GLYCOL E E E G E - G E E E
DIETHYLPHTALATE (DEPH) X X X X X - - FT E E
DIMETHYLAMINE X X X FT G - - X E FT
DIMETHYLANILINE X X FT - G X G E E -
DIMETHYLETHER FT FT X X X - - FT E G
DIMETHYLFORMAMIDE G FT E - G G G X E E
DIOCTYL PHTHALATE X X X X G - FT G E FT
DIOCTYL SEBACATE X X X - G FT FT G E -
DIOXIN X X X - G G X X E E
DIPHELYL FT X X - X X X E E G
DIPHENIL OXIDE X X X - X - G FT E -
DISTILLED WATER E E E E E E E E E E
DODECYL ALCOHOL E E - - E G - E E -
EPICHLOROHYDRIN (LIQUID) X X X - G G X X E E
ESSENCES WITH HIGH AROMATIC CONTENT G FT X - X X X E E X
E
ESSENCES WITH LOW AROMATIC CONTENT E FT X - X X X E E X
ESSENTIAL OILS G X X X - X X E E X
 FLUID COMPATIBILITY

COMPATIBILITY BEHAVIOUR OF TUBE POLYMERS CONTACTING FLUIDS (BASED ON LITERATURE DATA)

CHLOROPRENE
NBR / X-NBR

EPDM / EPM
CHEMICALS

UHMWPE
VMQ

FKM
SBR

CIIR

FEP
NR
ETHANE (GAS) E G X - X X FT E E E
ETHANOLAMINE G E E FT E G FT G E E
ETHIL ACETATE X FT FT X G G G X E G
ETHYL ACRYLATE (ETHYLACRILIC ESTER) X FT FT X G G G X E -
ETHYL ALCOHOL E E E G E E E E E E
ETHYL BENZENE FT X X X X X X G E X
ETHYL BROMIDE E E G - E X X E E G
E ETHYL CHLORIDE (CHLOROETHYL) X X X X X FT X G E X
ETHYL ETHER X FT X X X - X X E X
ETHYL GLYCOL X X G - G G - X E E
ETHYL MERCAPTAN X FT X - FT X FT X E -
ETHYLENE (GAS) E G X X - X G E E E
ETHYLENE CHLORIDE (DICHLOROETHYLENE) FT FT FT X G X X E E X
ETHYLENE GLYCOL E E G G E E E E E E
APPENDICES

ETHYLENE OXIDE X X X - FT FT X X E X
FERROUS CHLORIDE (AQUEOUS) E E E G E - E E E E
FERROUS SULPHATE E E E - E - E E E E
FLUORINE - - - - FT - - G E X
FLUOROBENZENE X X X - X X X E E -
FLUOROBORIC ACID 65% G G G FT G - X - E E
FLUOROSILICIC ACID G FT E FT G - X X E E
FORMALDEHYDE G G G FT G G E E E E
82

F FORMALIN G E E FT E - G E E E
FORMIC ACID G E E FT E - G FT E G
FUEL A (iso-octane) E FT X X X X X E E X
FUEL B (70% iso-octane, 30% toluene) G FT X X X X X E E X
FUEL C (50% iso-octane, 50% toluene) G X X X X X X E E X
FUEL HIGH AROMATIC FT X X X X X X E E X
FUEL LOW AROMATIC G X X X X X X E E X
FURFURYL ALCOHOL X G G X G G G FT E X
GALLIC ACID X X FT - G G E E E E
GLUCOSE E E E G E E E E E E
G
GLYCERINE E E E G E E E FT E E
GREASY ACIDS IN GENERAL G G FT - FT X FT E E FT
HELIUM E E E G E E E E E E
HEPTANE E G X X X X X E E E
HEXALDEHYDE X G FT X G G FT - E E
HEXANE E E X X X X X E E E
HEXIL ALCOHOL (HEXANOL) G G E G E - FT - E E
HYDRAULIC BRAKES FLUID G FT X X X FT X E E G
HYDRAULIC OILS ESTER BASED G X X X G X X G G -
HYDRAULIC OILS GLYCOL BASED E G X X E FT G FT E E
HYDRAULIC OILS MINERAL BASED E FT X X X X X E E FT
H HYDRAULIC OILS PHOSPHATE ESTER BASED X X X X G G G E E X
HYDRAZINE G G G X E E X X E E
HYDRAZINE HYDRATE (AQUEOUS) FT FT X X E G FT E E E
HYDROBROMIC ACID FT G FT G G E G E E E
HYDROCHLORIC ACID (GAS) X X X X G G - X E E
HYDROCHLORIC ACID 15% (MURIATIC ACID) G FT E G E FT E E E E
HYDROCHLORIC ACID 38% (MURIATIC ACID) FT FT G FT E X FT E E E
HYDROCYANIC ACID 20% FT FT X X E - G E E -
HYDROFLUORIC ACID 10% FT X FT X X - E G E G
HYDROFLUORIC ACID 30% X X X X X - E G E G

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY

COMPATIBILITY BEHAVIOUR OF TUBE POLYMERS CONTACTING FLUIDS (BASED ON LITERATURE DATA)

CHLOROPRENE
NBR / X-NBR

EPDM / EPM
CHEMICALS

UHMWPE
VMQ

FKM
SBR

CIIR

FEP
NR
HYDROFLUORIC ACID 75% X X X X X - G G E X
HYDROGEN (GAS) E E G FT E G FT E E E
H HYDROGEN PEROXIDE 10% (PERHYDROL) FT X FT X G G E G E G
HYDROGEN PEROXIDE 30% (PERHYDROL) X X X X G G E E E E
HYDROGEN SULPHIDE X FT X X E E - G - -
IODINE (ALCOHOLIC SOL. 5-10%) G X G - G - X E E FT
ISOBUTYL ALCOHOL G E G FT E E E E E E
ISO-OCTANE E G X X X X E E E X
ISOPROPYL ACETATE X X FT X G G G X E -
I
ISOPROPYL ALCOHOL G E E G E E E E E E
ISOPROPYL BENZOL X X X G X - X E E -
ISOPROPYL CHLORIDE X - X - X - - E E -
ISOPROPYL ETHER FT FT X X FT X - FT E FT
K KEROSENE G FT X X X X FT E E X

APPENDICES
LACTIC ACID (AQUEOUS) FT FT G FT G G E E E G
LANOLIN E G X - FT - FT E E G
LAURYL ALCOHOL E E - - E - - E E -
L LEAD ACETATE (AQUEOUS) E E E FT E E E - E E
LEAD NITRATE E E E - E E G - E -
LEAD SULPHATE E E E G E E E - E E
LINSEED OIL E G X X FT FT E E E X
MAGNESIUM CHLORIDE (AQUEOUS) E E E G E E E E E E

83
MAGNESIUM HYDROXIDE G E G FT E E - E E -
MAGNESIUM SILICATE (TALC) E E E - E E E E E E
MAGNESIUM SULPHATE G E G G E E E E E E
MAGNESIUM SULPHITE (AQUEOUS) E E E - E E E E E E
MALEIC ACID (AQUEOUS) X X FT X FT X - E E E
MALIC ACID (AQUEOUS) E E E FT E X E E E E
MERCURY E E E G E E E E E E
MERCURY CHLORIDE FT G E - E E E E E E
MERCURY NITRATE E E E - E E E - E E
MESITYL OXYDE X X X X G X X X E -
METHANE (GAS) E FT X X FT X FT E E E
M
METHIL ACETATE X X X X G G X X E E
METHYL ALCOHOL (METHANOL) E E E G E E E G E E
METHYL CHLORIDE X X FT X G FT X FT E X
METHYL GLYCOL - G X - G - - X E E
METHYL PHTHALATE X X X - G - - G E -
METHYLAMINE (AQUEOUS) X E E - E - - E E E
METHYLETHYLKETONE X X X X G FT FT X E E
METHYLISOBUTHYLKETONE X X X - FT FT FT X E E
METHYLMETACRYLATE X X X X X X - X E G
MILK - - - - E E G - G E
MONOCHLOROACETIC ACID X X X FT G E X X E X
MONOCHLOROBENZOL X X X - X - FT G E X
NAPHTA (OIL) E X X X X X G E E X
NATURAL GAS E E E X E X X E E E
NATURAL GAS (HUMID) E E FT X FT X X E E G
NICKEL SULPHATE (AQUEOUS) E E E G E E E E E E
N
NITRIC ACID 10% FT FT FT X E - FT G E E
NITRIC ACID 25% X X X X E - X G E E
NITRIC ACID 40% X X X X G - X G E X
NITRIC ACID 60% X X X X FT - X G E X
 FLUID COMPATIBILITY

COMPATIBILITY BEHAVIOUR OF TUBE POLYMERS CONTACTING FLUIDS (BASED ON LITERATURE DATA)

CHLOROPRENE
NBR / X-NBR

EPDM / EPM
CHEMICALS

UHMWPE
VMQ

FKM
SBR

CIIR

FEP
NR
NITROBENZENE X X FT X X FT X G E X
NITROGEN E E E G E E E E E E
NITROPROPANE X X X - G G X X E -
N
NITROTOLUENE FT X X - FT FT - FT E E
NITROUS OXIDE (GAS) E E E G E - E E E E
NONYLALCOHOL (NONANOL) X E X - E - G E E E
OCTANE E FT X X X X X E E E
OCTYL ALCOHOL G E G FT E G G E E E
OIL & GREASES ANIMAL BASED E G X X G X FT E E E
OIL & GREASES MINERALS BASED UP TO °C 120 80 X X X X X 200 130 70
OIL & GREASES SILICONE BASED E E E G E X G E E E
OIL & GREASES VEGETABLE BASED E FG FT X FT FT FT E E G
Oil IRM (ASTM) n°1, 100°C E G X X X X G E E G
O
Oil IRM (ASTM) n°2, 100°C E G X X X X FT G E FT
APPENDICES

Oil IRM (ASTM) n°3, 100°C E FT X X X X FT G E FT

OLEIC ACID G FT X X X X X G E G
OLIVE OIL E E X X FT G G E E E
OXALIC ACID G G G X G E E E E E
OXYGEN UP TO °C X 90 X FT 120 120 175 200 130 70
OZONE X G X X E G E E E G
PALM OIL E G X X E G E E E X
PALMITIC ACID FT G FT X FT G E G E E
84

PARAFFIN, PARAFFIN OIL E G X X FT X G E E FT

PARAFORMALDEHYDE G G FT - G E E G E E
PENTACHLOROPHENOL X X X - G E FT - E -
PENTANE E E X X X X X - E X
PERCHLORIC ACID (AQUEOUS) FT FT G X G G X E E E
PERCHLOROETHYLENE (TETRACHLOROETHYLENE) FT X X X X X G E E X
PETROLEUM 70°C G FT X X X X X E G FT
PHENOL (PHENIC ACID) X FT FT X X X G E E X
PHOSPHORIC ACID 20% FT G FT G E - G E E E
PHOSPHORIC ACID 50% G E E FT E - G E E E
PHOSPHORIC ACID 85% FT E E FT E - FT E E E
PHOSPHOROUS OSSYCHLORIDE (PHOSPHORYL CHLORIDE) X X X - E - - E E FT
PHOSPHORYL CHLORIDE X X X - G - - E E FT
P PHTHALIC ACID X E E - E E - X E E
PICRIC ACID (TRINITROPHENOL) FT FT FT FT E E E G E E
PINE OIL G X X X X X G E E FT
POTASSIUM ACETATE (AQUEOUS) G G X X E E X X E E
POTASSIUM BICARBONATE (AQUEOUS) E E E G E E E E E E
POTASSIUM BROMIDE E E E - E E E E E E
POTASSIUM CARBONATE (POTASH) E E E G E E E E E E
POTASSIUM CHLORATE E E E - E E G E E E
POTASSIUM CHLORIDE E E E G E E E E E E
POTASSIUM CYANIDE E E E G E E E G E E
POTASSIUM DICHROMATE G FT FT - E E E E E E
POTASSIUM HYDROXIDE (CAUSTIC POTASSIUM) E E E FT E E FT E E E
POTASSIUM HYPOCHLORITE (JAVEL WATER) G X G - G E G E E FT
POTASSIUM IODIDE 10% (AQUEOUS) E E FT FT E E - E E E
POTASSIUM NITRATE (AQUEOUS) E E E G E E E E E E
POTASSIUM PERMANGANATE 10 % (AQUEOUS) G FT FT - E E E E E E

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY

COMPATIBILITY BEHAVIOUR OF TUBE POLYMERS CONTACTING FLUIDS (BASED ON LITERATURE DATA)

CHLOROPRENE
NBR / X-NBR

EPDM / EPM
CHEMICALS

UHMWPE
VMQ

FKM
SBR

CIIR

FEP
NR
POTASSIUM PHOSPHATE E G E - E E X E E E
POTASSIUM SULPHATE E E E - E E E E E E
POTASSIUM SULPHITE E E E - E E E E E E
PROPANE (GAS) E G G X FT X X E E G
PROPANE (LIQUID) E G X X X X FT E E X
PROPIONIC ACID X FT X - E E - E E E
PROPYL ACETATE X E X X E G - X E G
PROPYL ALCOHOL G E E G E E G E E E
PROPYL AMINE X X X - X E X X E -
P PROPYLENE FT X X X X X X E E -
PROPYLENE CHLORIDE X X X X X X X - E X
PROPYLENE GLYCOL FT E E G E G E E E E
PROPYLENE GLYCOL G E E G E E - E E E
PROPYLENE OXIDE X X X - G G X X E -

APPENDICES
PRUSSIC ACID 20% (HYDROCYANIC ACID) FT FT G X E - G G E E
PRUSSIC ACID 80% (CONC.) FT FT FT X G - G G E E
PURINE E E E - E - E E E E
PYRANOLS (OIL FOR TRANSFORMER) E X X - X - G E E FT
PYRIDINE X X X - E G X FT E E
SEA WATER (BRINE, BRACKISH) E G G G E E E E E E
SILICA E E E - E E E E E E
SOAP AND SOAP SOLUTIONS E E E FT E E E E E E

85
SODIUM ACETATE E E E X E FT E G E E
SODIUM BICARBONATE E E E G E E E E E E
SODIUM BISULPHATE E E E FT E - E E E E
SODIUM BISULPHITE E E E FT E - E E E E
SODIUM CARBONATE (SODIUM CALCINATE) E E E G E E E E E E
SODIUM CHLORATE E E E - E X E E E E
SODIUM CHLORIDE (KITCHEN SALT) E E E G E E E E E E
SODIUM CYANIDE E E E X E - E E E E
SODIUM DICHROMATE FT G FT X E - G E E E
SODIUM FLUORIDE E E E - E E G E E E
SODIUM HYDROXIDE 20°C (CAUSTIC SODA, SODIUM HYDRATE) G E E X E E G FT E E
SODIUM HYDROXIDE CONC. 100°C X FT X X G G X X E X
SODIUM HYPOCHLORITE 30% G X FT - E G FT FT E G
S
SODIUM METAPHOSPHATE E E E FT E - E E E E
SODIUM NITRATE E E E G E E E E E E
SODIUM PERBORATE E E E FT E E E E E E
SODIUM PEROXIDE G FT G FT G E X G E -
SODIUM PHOSPHATE AND TRISODIC PHOSPHATE E E E - E E E E E E
SODIUM SILICATE (AQUEOUS) E E E G E E E E E E
SODIUM SULPHATE (AQUEOUS) E E E - G E E E E E
SODIUM SULPHITE E E E - E G E E E E
SODIUM THIOSULPHATE (ANTICHLORINE) E E E - E E E E E E
SOYBEAN OIL E G X X FT FT E E E X
STANNOUS CHLORIDE E E E G G E G E E E
STARCH (AQUEOUS) E E E - E - E E E E
STARCH SYRUP E E E - E - E E E E
STEARIC ACID G G G X G G E G E X
STYRENE (MONOMER) X X X X X X X G E X
SUGAR (AQUEOUS) E E E G E E E E E E
 FLUID COMPATIBILITY

COMPATIBILITY BEHAVIOUR OF TUBE POLYMERS CONTACTING FLUIDS (BASED ON LITERATURE DATA)

CHLOROPRENE
NBR / X-NBR

EPDM / EPM
CHEMICALS

UHMWPE
VMQ

FKM
SBR

CIIR

FEP
NR
SULPHONITRIC ACID X X X X X - X X E X
SULPHOPHOSPHORIC ACID X FT X X G - - E E FT
SULPHUR 90°C (MOLTEN) X X X - X FT E E E X
SULPHUR DIOXIDE X FT X X E G FT E E G
SULPHUR TRIOXIDE FT X G X G G FT E E E
SULPHURIC ACID 10% E E E FT E G G E E E
SULPHURIC ACID 30% (FOR ACCUMULATORS) G G G FT E FT X E E E
S SULPHURIC ACID 50% FT FT FT X E X X E E E
SULPHURIC ACID 75% X X X X G X X E E FT
SULPHURIC ACID 90% X X X X FT X X E E X
SULPHURIC ACID OR OLEUM (STEAMING) X X X X X FT X E E X
SULPHUROUS ACID 10% HUMID FT FT FT FT E G E G E E
SULPHUROUS ACID 75% HUMID X X X X G FT FT G E FT
SULPHUROUS HYDROGEN (DRY) G FT FT - G - E E E E
APPENDICES

SULPHUROUS HYDROGEN (HUMID) FT FT X - G - E E E E

TALC (MAGNESIUM SILICATE) E E E - E E E E E E
TANNIC ACID G G G FT G E G G E E
TARTARIC ACID (AQUEOUS) E E E X G G E E E E
TETRACHLOROETHYLENE G X X X X X G E E X
TETRAHYDROFURAN FT X X X X G - X E FT
TETRALYNE (TETRAHYDRONAPHTALENE) FT X X X X - X E E FT
TOLUENE, TOLUOL FT X X X X X X E E X
86

TRIBUTYL PHOSPHATE X X X - E X - X E E
T TRICHLOROETHANE (CHLOROETHANE) X X X X X X X E E X
TRICHLOROETHYLENE FT X X X X X X G E X
TRICHLOROMETHANE (CHLOROFORM) X X X - X X X E E X
TRICRESYLPHOSPHATE X FT E X E - E G E FT
TRIETHANOLAMINE G E FT FT FT G E E E E
TRIETHYLAMINE FT - - X X - - - E E
TRIOCTHYLPHOSPHATE G X X X X E FT X E E
TRISODIC PHOSPHATE E E E - E E E - E E
TURPENTINE (ESSENCE, OIL) E X X X X X X E E FT
U UREA E E E - E E E E E E
VASELINE G G G G G - - - - G
V VINYL ACETATE E E E X E - - G E -
VINYL CHLORIDE (MONOMER) X X G X G X X E E X
WATER E G E E E E G G G G
WATER STEAM UP TO °C 80 X X X 130 130 120 150 120 X
W
WEATHER (EXPOSURE TO): GEN. REG. X G X FT E E E E E G
WOOD OIL G FT X X X - FT E E G
XYLENE, XYLOLO X X X X X X X G E X
X
XYLENOL X X X - X X X G E X
ZINC ACETATE (AQUEOUS) G G X G E - X X E E
Z ZINC CHLORIDE (AQUEOUS) E E E G E E E G E E
ZINC SULPHATE (AQUEOUS) E E E G E E E E E E

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY

WARNING

MANULI HYDRAULICS HAVE NOT PERFORMED TESTING ON FINISHED HOSE ASSEMBLIES WITH ANY OF THE CHEMICALS
MENTIONED ABOVE.

THE RATING OF THE TUBE POLYMERS IN RELATION TO SPECIFIC CHEMICALS AND FLUIDS IS BASED ON LITERATURE
DATA AND DOES NOT IMPLY ANY GUARANTEE FROM MANULI HYDRAULICS THAT A HOSE USING THAT SPECIFIC
POLYMER IS SUITABLE FOR CONVEYING SAID CHEMICAL OR FLUID. ANY USE OF MANULI INDUSTRIAL HOSES WITH
FLUIDS OTHER THAN THOSE SPECIFIED IN THE HOSE DATA SHEETS IS DONE UNDER THE SOLE AND EXCLUSIVE
RESPONSIBILITY OF THE END USER AND NO LIABILITY WHATSOEVER CAN BE ATTRIBUTED TO MANULI HYDRAULICS
IN THAT REGARD.

ANY APPLICATION OF INDUSTRIAL HOSES WITH VARIOUS FLUIDS AND CHEMICALS, MUST BE FIELD TESTED AND
APPROVED BY USERS.

COMPATIBILITY OF HOSE AND FITTINGS WITH CONVEYED FLUID IS AN ESSENTIAL FACTOR IN AVOIDING CHEMICAL
REACTIONS THAT MAY RESULT IN RELEASE OF FLUIDS OR FAILURE OF THE HOSE OR CONNECTION. THIS CHEMICAL
COMPATIBILITY GUIDE MUST NOT BE USED IN CONJUNCTION WITH ANY OTHER COMPATIBILITY GUIDES FROM
PREVIOUS OR FUTURE CATALOGUE EDITIONS, BULLETINS OR PUBLICATIONS. INCORRECT USE OF THESE CHARTS
COULD RESULT IN DEATH, PERSONAL INJURY OR PROPERTY DAMAGE.

EXAMPLES OF SUBSTANCES IN CHEMICAL FAMILIES

The following table summarizes some relevant characteristic substances that are typical representatives of

APPENDICES
some chemical families used in various industrial sectors

Benzene, cumene, p-cumene, naphtalene, toluene, xylene, cresol, styrene,

Aromatic solvents
cyclohexanol and combinations

87
Aliphatic solvents Propane, butane, pentane, hexane, helptane, dipentene, tripropylene

Chloroform, dichlorobenzene, dichloroethylene, methylenbromide,

Halogenated solvents methylenchloride, benzylchloride, carbon tetrachloride, trichloroethylene, carbon
bisulphite, turnetine, perchloroethylene, dichloroethane

Acetone, methylketone, isobutylketone, methylethylketone,

Ketonic solvents
methylisobuthylketone

Esters solvents Butyl acetate, methyl acetate, amyl acetate, isobutyl acetate

Aniline, ethylene diamine, diethanol amine, triethanolamine, dimethyl amine,

Amines
monoethanolamine

Alcohols Mthanol, ethanol, propanol, butanol, glycerol

 APPENDICES

CLEANING & SANITIZATION OF FOOD GRADE HOSES

The quality of food products depends on many factors from the composition and hygienic storage conditions
of raw materials, to technology, production equipment, environment and stocking methods.
For this reason it is critical that, in addition to using common sense, all required production steps are correctly
followed – especially those related to cleaning and sanitization of equipment.
Manuli rubber food hose products are ideal for use in the delivery of many dry and liquid foodstuffs and,
if correctly cleaned and sanitized in accordance with industrial norms and specifications, will provide long
lasting, reliable foodstuff conveyance with no adverse effects on the quality or taste of the product.
Due to the huge variation in cleaning regulations and requirements in the food industry Manuli Hydraulics
does not presume to provide a definitive cleaning and sanitization handbook, but rather offers the following
recommendations which the end user is free to determine the appropriate schedule and usage of.
Table 1
MAX.
STEP PRODUCT CONC. TEMP. COMMENTS
TIME
Drainage & elimination of organic
PRE-WASH DRINKING WATER - 20°C 10 mins
solid waste
See manufacturer’s instructions
CLEANSING & LIQUID DETERGENT (see 5% - Max. for correct usage - Manuli only
APPENDICES

15 mins
WHITENING Table 2) 15%* 100°C indicates the temperature and
time that must not be exceeded
INTERMEDIATE Drainage to complete removal of
DRINKING WATER - 20°C 5 mins
RINSE organic waste
See manufacturer’s instructions
PESTICIDES PURSUANT
5% - Max. for correct usage - Manuli only
SANITIZATION TO APPLICABLE LAW IN 30 mins
15%* 100°C indicates the temperature and
COUNTRY OF USE
88

time that must not be exceeded

Continue to flush hose until all
visible residue and foam from
FINAL RINSE DRINKING WATER - 20°C 10 mins
detergents and disinfectants is
removed
Recommended to ensure that
FINAL DRYING STATIC: DRAINING
future hose use does not result
& ANTI-MOLD DYNAMIC: AIR BLOWING - *† 10 mins
in taste or smell contamination of
TREATMENT DRY & CLEAN
foodstuffs
* As indicated by the manufacturer
† According to convenience to avoid condensation

The recommendations listed below are intended to prevent damage to the rubber hoses. For more accurate
cleaning & sanitization procedures follow your regional and national laws concerning foodstuff hose cleaning.
Table 2
PRODUCT RUBBER COMPOUNDS CONCENTRATION TEMPERATURE
HOT WATER ALL 0 Max. 95°C
STEAM ALL 0 Max. 110°C
Max. 2% Max. 85°C
CAUSTIC SODA ALL
Max. 5% Max. 25°C
Max. 0.1% Max. 85°C
NITRIC ACID NO SBR/NR
Max. 2% Max. 25°C
CHLORINE ACETIC ACID NO SBR/NR Max. 1% Max. 25°C
PER ACETIC ACID NO SBR/NR Max. 1.5% Max. 25°C
PHOSPHORIC ACID NO SBR/NR Max. 2% Max. 65°C
OTHER T.B.C. T.B.C. T.B.C.

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
APPENDICES

BRANDING OF HOSES
Manuli Industrial Hoses are clearly marked with indelible mylar tape and are branded with the Manuli Ryco
group logo.
STORAGE OF HOSES AND ASSEMBLIES
All hose products manufactured by Manuli Hydraulics are designed to be robust, reliable and long-
lasting. Our proprietary rubber compounds are among some of the most advanced in the world and,
as a company, we fully stand behind the quality and reliability of our products.
However, by its nature even the highest quality rubber will degrade over time, and certain environmental
conditions have been categorically linked to an increase in the rate at which this deterioration can occur.
Industrial standards such as BS 5244, SAE J1273, DIN 20066, ISO 8331 & ISO 2230 all vary in their
recommendations of safe storage conditions and maximum shelf-life.
Manuli hoses can be safely stored for extended periods in most typical warehousing conditions, but in order
to minimise deterioration of stored hoses Manuli Hydraulics recommends the following:
• Bulk hoses should be stored for no longer than 6 years (based on hose production date), including no
more than 6 months storage time as assemblies.
• Extremes of temperature and humidity, along with abnormal fluctuations in temperature, can affect
storage life. Manuli recommends a cool, dry storage location away from direct sunlight.
• If bulk hoses are stored coiled, the inside coil diameter should not be less than 2x the minimum bend

APPENDICES
radius of the specific hose. Coiled hoses should also never be stacked on top of one another.

89
 APPENDICES

HANDLING AND USAGE OF HOSES AND ASSEMBLIES

Manuli Hydraulics has a global reputation as one of the premium suppliers of high quality, robust
rubber hoses. Our products are designed with ease of use and durability in mind, but as with any
technical product it is important that Manuli hoses are used according to their purpose and within
their limits of operation. This includes how the hoses are handled both before and during use.

HANDLING
Most precautions necessary when handling Manuli hoses are simple common sense and, as long as the user
respects the technical nature of the hose and treats it accordingly, it is unlikely that they will encounter any
issues caused due to incorrect handling.
A few considerations to bear in mind are:
• If a hose is twisted do not pull it suddenly to attempt to untwist it.
• Avoid dragging hoses over abrasive surfaces. If you are moving bulk hose or large assemblies,
consider using pallets or other similar methods.

PRE-USAGE
All Manuli hoses are made to meet or exceed their stated specifications, so assuming the hose is properly
assembled you can be confident that the hose will perform as expected without any issues.
APPENDICES

To ensure that the hose is correctly assembled:

• Always ensure that the fittings are fully inserted into the hose and that the ferrule is crimped to the
proper diameter according to the crimping data provided by the fitting manufacturer.
• It is advisable to perform pressure and leak testing on all assemblies prior to putting them into service.
Testing should be carried out according to the relevant instructions for the testing equipment.

USAGE
90

Similarly, general good practice for the intended application will usually prevent any excessive wear or damage
to the hose.
A few important considerations are:
• Do not kink or crush the hose as this can irreparably damage the hose reinforcement structure which
can lead to bursting.
• Only use the hoses to convey their intended fluids / substances.
• Do not exceed the stated working pressure of the hose.

MAINTENANCE
Manuli hoses are designed to be reliable and easy to maintain. Standard equipment maintenance schedules
should be sufficient to ensure that any signs of damage or wear on hoses can be spotted well in advance of
them becoming problematic.

REPAIR
Used rubber hoses are not usually considered to be repairable if signs of deterioration are noted during
maintenance inspections. However, if damage or wear is limited to the ends of the hose then it may be
possible to cut off the worn section and reassemble the hose. However, a reassembled hose will not have the
expected service life of a new hose and should still be replaced according to the maintenance schedule as if
it were the original hose assembly.

WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
Global Marketing Office
Email: [email protected]

www.manuli-hydraulics.com/industrial-hoses

© Copyright 2023 Manuli Hydraulics. All rights reserved.

All product names are either trademarks or registered trademarks of
Manuli Hydraulics or the Manuli Ryco group unless otherwise stated.