0% found this document useful (0 votes)
46 views

BEE MCQ Unit II

This document contains 46 multiple choice questions about electrostatics and capacitors. The questions cover topics like the definition of capacitance, factors that capacitance depends on for different capacitor configurations, properties of dielectrics, and other concepts in electrostatics. The document is presented as a quiz or test on the topic for students to review.

Uploaded by

Umesh Patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
46 views

BEE MCQ Unit II

This document contains 46 multiple choice questions about electrostatics and capacitors. The questions cover topics like the definition of capacitance, factors that capacitance depends on for different capacitor configurations, properties of dielectrics, and other concepts in electrostatics. The document is presented as a quiz or test on the topic for students to review.

Uploaded by

Umesh Patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 17

BEE MCQ on Unit No.

II (A): Electrostatics

Q.-1) The _______ can never store energy.


(a) Resistance (b) Inductance (c) Capacitance (d) Energy source.
Q.-2) Lightning strikes earth from charged cloud 100m above its surface. If breakdown strength

of air is 3 x 106 V/m, the voltage between cloud and earth surface is

_________ Million Volts.

(a) 3 (b) 30 (c) 300 (d) 3000

Q.-3) During charging and discharging of capacitors, no current passes through

(a) connecting wire (b) battery (c) dielectric (d) circuit switch

Q.-4) 1 Pico Farad is equal to _____ Farad.

(a) 10-3 (b) 10-6 (c) 10-9 (d) 10-12

Q.-5) A capacitor is made of two parallel plates with an area of 11 sq. cm and are
separated by mica sheet 2 mm thick. If for mica relative permittivity is 6 then the
capacitance of the capacitor is
(a) 29.3 pF (b) 29.2182 pF (c) 29.2182 nF (d) 29.028 mF

Q.-6) Which factor of the following is not affecting the dielectric strength of a capacitor?

(a) temperature (b) thickness of material

(c) size and shape (d) type of circuit in which it is used

Q.-7) Unit of Electric flux density is

(a) V/m (b) F/m (c) N/C (d) C/m2

Q-8) In Capacitors, energy is stored in its

(a) Plates (b) Dielectric (c) Electric Field (d) Connecting Wire

Prof B S Bobdey
Q.-9) Relative Permittivity of a medium has a unit of

(a) V/m (b) C/m2 (c) F/m (d) None of these

Q.-10) Permittivity of free space is constant and its value is ______

(a) 8 F/m (b) 554 F/m (c) 8.854*10-12 F/m (d) 10-12 F/m

Q.-11) The time constant of R-C series circuit is given by______& its unit is_____

(a) R/C & ohm (b) RC & seconds (c) 1/RC & farad (d) RC & farad/ohm

Q.-12) The capacitance of capacitor is NOT influenced by

(a) Plate thickness (b) Plate separation (c) Plate area (d) Nature of dielectric

Q.-13) There is a capacitor with dielectric strength of 16 KV/mm. If a potential of 18 KV/mm

is applied across the plates of same capacitor. What will happen with capacitor

(a) Double charged (b) Full charged (c) Ruined (d) Not charge

Q.-14) If two conducting surfaces are separated by an insulating material forms _____

(a) Inductor (b) resistor (c) R-L (d) capacitor

Q.-15) The space around a charge or charged body is called _______


(a) Electric field (b) Magnetic field (c) Electromagnetic field (d) Magnetostatic field

Q.-16) The electric lines of force always enter or leave a conducting surface at
(a) 180° (b) 0° (c) 90° (d) 360°
Q.-17) Equivalent value of capacitance of two capacitors connected in parallel & series is
20 μF and 3.75 μF respectively. Then the value of two capacitors will be
(a) 4μF & 16μF (b) 5μF & 15μF (c) 10μF & 10μF (d) 11μF & 9μF
Q.-18) As charged capacitor discharges through resistor R, _________
(a) the voltage increases, current decreases
(b) the voltage increases, current increases
(c) the voltage decreases, current decreases

Prof B S Bobdey
(d) the voltage decreases, current increases
Q.-19) The total no. of lines of force in any particular electric field is
(a) Electric flux (b) Magnetic flux
(c) Electric flux density (d) Electric flux intensity
Q.-20) ______ is used as a dielectric in a capacitor.
(a) Copper (b) Aluminium (c) Paper (d) Carbon
Q.-21) The force between the two charges can be obtained by

(a) Joule’s law (b) Faraday’s law (c) Coulomb’s law (d) Lenz’s law

Q.-22) Three capacitors connected in series have equivalent capacitance of 2 μF. If one of the

capacitor is removed, then the effective capacitance becomes 3 μF. Therefore the

value of removed capacitor is _______ μF.

(a) 6 (b) 1.5 (c) 2/3 (d) Can’t be determined

Q.-23) The ease with which a dielectric medium permits an electric flux to establish in it is

(a) Permeability (b) Permittivity (c) Permeance (d) Persistance

Q.-24) Two capacitors 2 μF and 8 μF are in series and combination is connected across 50 V

Then the energy stored in 8 μF capacitor is _______ μJ

(a) 200 (b) 100 (c) 400 (d) 2000

Q.-25) The dielectric strength is measured in __________

(a) KV/N (b) V/C (c) KV/mm (d) F/m

Q.-26) Which of the following does not change when a glass slab is introduced between the plates

of a charged parallel plate capacitor.

(a) Electric charge (b) Electric energy (c) Capacitance (d) Electric field intensity

Q.-27) A charge Q1 exerts some force on a second charge Q2. A third charge Q3 is brought near.

The force of Q1 exerted on Q2

(a) Decreases
(b) Increases
(c) Remains unchanged

Prof B S Bobdey
(d) Increases if Q3 is of same sign as Q1 & decreases if Q3 is of opposite sign

Q.-28) Which of the following appliance will be studied under electrostatics

(a) Incandescent lamp (b) Electric iron (c) Lightning rod (d) Electric motor

Q.-29) An air capacitor has the same dimensions as that of a mica capacitor. If the capacitance of

mica capacitor is 6 times that of air capacitor then relative permittivity of mica is

(a) 36 (b) 12 (c) 3 (d) 6

Q.-30) Two charges are placed at a certain distance apart. A brass sheet is placed between

them. The force between them will

(a) Increases (b) decreases (c) remain unchanged (d) none of these

Q.-31) The relative permittivity of vacuum is

(a) 1 (b) 0 (c) 8.854*10-12 (d) none of these

Q.-32) The relative permittivity of a material is 10. Its absolute permittivity will be

(a) 9*10+8 (b) 88.54*10-12 (c) 5*10-5 (d) 9*10+5

Q.-33) Another name for relative permittivity is

(a) Dielectric constant (b) Dielectric strength (c) Potential gradient (d) None of these

Q.-34) The relative permittivity of most materials lies between

(a) 20 and 100 (b) 10 and 20 (c) 100 and 200 (d) 1 and 10

Q.-35) When the relative permittivity of the medium is increased, the force between two

charges placed at a given distance apart

(a) Increases (b) Decreases (c) Remains the same (d) None of these

Q.-36) Two charges are placed at a certain distance apart. A glass slab is placed between

them. The force between them will

(a) Increases (b) decreases (c) remain unchanged (d) Zero

Q.-37) If the relative permittivity of the medium increases, the electric field intensity at a point

Prof B S Bobdey
due to a given charge

(a) Increases (b) decreases (c) remain unchanged (d) None of these

Q.-38) Two charged spheres of radii 10 cm & 15 cm are connected by a thin wire. No current

will flow if they have

(a) The same charge (c) The same energy


(b) The same field on their surface (d) The same potential

Q.-39) The capacitance of a capacitor is ______________ relative permittivity.

(a) Directly proportional to (b) Inversely proportional to

(c) Independent of (d) Directly proportional to square of

Q.-40) The most convenient way of achieving large capacitance is by using

(a) Multiple construction (b) Decreased distance between plates

(c) Air as dielectric (d) Dielectric of low permittivity

Q.-41) A capacitor opposes

(a) Change in current (b) Change in voltage

(c) Can’t say ( d) Both change in current & voltage

Q.-42) If a multiplate capacitor has 7 plates each of area 6 sq. cm, then,

(a) 6 capacitors will be in parallel (b) 7 capacitors will be in parallel

(c) 7 capacitors will be in series (d) 6 capacitors will be in series

Q.-43) Two capacitors of capacitances 3 μF and 6 μF are connected in series, then the total

capacitance of their series combination is

(a) 9 μF (b) 2 μF (c) 18 μF (d) 24 μF

Q.-44) The capacitance of a parallel plate capacitor does not depend upon

(a) Area of plates (b) Medium between plates

(c) Separation between plates (d) Metal of plates

Prof B S Bobdey
Q.-45) In order to increase the capacitance of a parallel plate capacitor, one should introduce

between the plates a sheet of

(a) Mica (b) Tin (c) Copper (d) Stainless steel

Q.-46) The capacitance of a parallel plate capacitor depends upon

(a) Thickness of plates (b) Potential difference between plates

(c) Separation between plates (d) The type of metals used

Q.-47) The empty space between the plates of a capacitor is filled with a liquid of dielectric

constant K. The capacitance of capacitor

(a) Increases by a factor K (c) Decreases by a factor K


(b) Increases by a factor square of K (d) Decreases by a factor square of K

Q.-48) A parallel plate capacitor is made by stacking n equally spaced plates connected

alternately. If the capacitance between any two plates is C, then the resulting

capacitance is

(a) C (b) nC (c) (n-1) C (d) (n+1) C

Q.-49) Two capacitors have capacitances 25 μF when in parallel and 6 μF when in series.

The value of individual capacitances are

(a) 12 μF & 13 μF (b) 15 μF & 10 μF (c) 10 μF & 8 μF (d) None of these

Q.-50) A capacitor of 20 μF charged to 500 V is connected in parallel with another capacitor

of 10 μF capacitance and charged to 200 V. The common potential is

(a) 200 V (b) 250 V (c) 400 V (d) 300 V

Q.-51) A capacitor of 1 μF is charged to a potential of 50 V. It is now connected to an

uncharged capacitor of capacitance 4 μF. The common potential is

(a) 200 V (b) 250 V (c) 400 V (d) 300 V

Q.-52) There are two charges of 1μC and 5μC. The ratio of the forces acting on them will be

Prof B S Bobdey
(a) 1:1 (b) 1:5 (c) 5:1 (d) 1:25

Q.-53) Two capacitors of capacitances C₁ and C₂ are connected in parallel. A charge Q is

given to them is shared. The ratio of charges Q₁/Q₂ is

(a) C₂/C₁ (b) C₁/C₂ (c) C₁C₂ (d) 1/C₁C₂

Q.-54) The branch dealing with electricity at rest is called

(a) Electrostatics (b) Magnetostatics (c) Electromagnetics (d) Electromechanics

Q.-55) Which of the following statement is true for electric lines of force.

(a) They intersect each other at regular interval.


(b) They form a close loop.
(c) They can pass only through insulating medium.
(d) They can enter charged bodies and pass through them.

Q.-56) The electric flux passing at angles through unit area of surface is called as

(a) Electric charge (b) Electric field strength

(c) Electric flux (d) Electric flux density

Q.-57) The force experienced by a unit positive charge placed at any point in the electric field is

(a) Electric potential (b) Electric field intensity

(c) Displacement intensity (d) Electric flux density

Q.-58) The electric field intensity at a point is given by

(a) 1/2 VQ (b) Q/F (c) F/Q (d) FQ

Q.-59) ______ represents electric field intensity.

(a) V/d (b) Q/V (c) F/Q (d) VQ

Q.-60) Higher the value of E means

(a) Weaker is the value of electric field.


(b) Stronger is the value of electric field.
(c) Electric field is zero.
(d) None of these.

Q.-61) Which of the following relation is true.

Prof B S Bobdey
(a) E = ε/D (b) E = εD (c) D = εE (d) D = ε/E

Q.-62) The absolute permittivity of a medium is measured in

(a) V/m (b) A/m (c) F/m (d) H/m

Q.-63) The electric field intensity is numerically equal to

(a) Potential gradient (b) Potential difference

(c) Electric force (d) Electric potential

Q.-64) If Q₁ = Q₂ = 1 C and distance between them is 1 m then the force between them is

(a) 9 Х 10⁸ N (b) 9 Х 10⁹ N (c) 9 Х 10⁻⁹ N (d) 4π Х 10⁻⁷ N

Q.-65) The constant of proportionality in Coulomb’s law which depends upon surrounding

Is given by

(a) 4πε (b) 4πε₀ (c) 1 / 4πε (d) 1 / 4πε₀

Q.-66) The capacitance of a parallel plate capacitor is given by


(a) εA/d (b) εd/A (c) ε/dA (d) A/εd

Q.-67) The charge transferred on the plates of a capacitor is 2 nC while the distance between

the plates ia 1 mm. If area of cross section is 10 cm² and air is used as a dielectric then

the voltage across the plates is

(a) 880 V (b) 225 V (c) 22.588 V (d) 225.88 V

Q.-68) A capacitor of 10 μF has a charge of 1 mC. If the distance between the plates is 1 cm
Then the electric field intensity between the plates is

(a) 10 KV/m (b) 10 V/m (c) 0.1 V/m (d) 80854 KV/m

Q.-69) A capacitor of 2 μF connected in a circuit has one plate at +6 V and the other plate at

-6 V. The charge on the negative plate of the capacitor is

(a) 24 μC (b) -24 μC (c) 12 μC (d) -12 μC

Q.-70) The ability of an insulating medium to resist its breakdown is called its

Prof B S Bobdey
(a) Dielectric constant (b) Relative permittivity

(c) Dielectric strength (d) Insulation resistance

Q.-71) For the capacitors in series, _________ remain same for all of them.

(a) capacitance (b) time constant (c) voltage (d) charge


Q.-72) For the capacitors in parallel, _________ remain same for all of them.

(a) capacitance (b) time constant (c) voltage (d) charge


Q.-73) Three capacitors each of capacitance C and breakdown voltage V are connected

in series then the capacitance and breakdown voltage of the combination is

(a) C/3, 3V (b) 3C, V/3 (c) 3C, 3V (d) C/3, V/3

Q.-74) The capacitors of capacitances 15 μF, 10 μF and 3 μF are connected in series and

series combination is connected across 10 V. When the capacitors are fully charged

then the charge on 3 μF capacitor is

(a) 10 μC (b) 20 μC (c) 3 μC (d) 15 μC

Q.-75) Three capacitors each of capacitance C and breakdown voltage V are connected

in parallel then the capacitance and breakdown voltage of the combination is

(a) C/3, 3V (b) 3C, V/3 (c) 3C, V (d) C/3, V/3

Q.-76) Two capacitors of capacitances 6 μF and 3 μF are connected in series across 100 V d.c.

supply then the voltage across 3 μF capacitor is

(a) 0 V (b) 100 V (c) 33.334 V (d) 66.667 V

Q.-77) Which of the following expression will not represent the energy stored in a capacitor

(a) 1/2 CV² (b) 1/2 QV (c) 1/2 QC (d) 1/2 Q²/C

Q.-78) Ten identical capacitors each of capacitance 2 F are connected in series and this series

combination is connected across a regulated power supply of output 10 V. The energy

stored in any one of the 2 F capacitor is

Prof B S Bobdey
(a) 1 J (b) 2 J (c) 5 J (d) 10 J

Q.-79) What fraction of the energy drawn from the charging battery is stored in a capacitor.

(a) 100 % (b) 50 % (c) 75 % (d) 66.67 %

Q.-80) When a capacitor ‘C’ is charged through resistance R then the initial rate of rise

of capacitor voltage is

(a) VRC (b) VR/C (c) V/RC (d) VC/R

Q.-81) A charging time constant of RC circuit is time required by the capacitor voltage to

rise from

(a) 0 to 90 % of its final value.


(b) 0 to 63.2 % of its final value.
(c) 0 to 36.8 % of its final value.
(d) None of these.

Q.-82) A charging time constant of RC circuit is time required by charging current to fall to

(a) 90 % of its initial maximum value.


(b) 63.2 % of its initial maximum value.
(c) 36.8 % of its initial maximum value.
(d) None of these.

Q.-83) The time constant of RC discharging circuit is time required for

(a) Capacitor voltage to fall to 36.8 % of its initial value.


(b) Capacitor voltage to fall to 63.2 % of its initial maximum value.
(c) Capacitor current to increase to 36.8 % of its initial maximum value.
(d) Capacitor current to decrease to 36.8 % of its initial maximum value.

Q.-84) The time constant of RC discharging circuit is time required for

(a) Capacitor voltage to rise to 36.8 % of its initial value.


(b) Capacitor voltage to fall to 63.2 % of its initial value.
(c) Capacitor current to fall to 36.8 % of its initial value.
(d) Capacitor current to fall to 63.2 % of its initial value.

Q.-85) Three capacitors of equal value are connected in parallel across 100 V supply. The

charge on each capacitor is 5 μC hence the value of capacitance is

Prof B S Bobdey
(a) 50 μF (b) 50 nF (c) 50 pF (d) 100 nF

Q.-86) The capacitors of capacitances 1 μF, 2 μF and 4 μF are connected in series and

series combination is connected across 200 V. Then the voltage across 4 μF capacitor is

(a) 57.01 V (b) 200 V (c) 114.2 V (d) 28.5714 V

Q.-87) A capacitor of 1 μF is charged to a potential of 100 V. It is disconnected and then

connected across another 1 μF capacitor. Then the new voltage across them is

(a) 150 V (b) 50 V (c) 100 V (d) 0 V

Q.-88) A capacitor of 1 μF is charged through a resistor of 1MΩ from a 100 V source then

voltage across capacitor after 2 sec. is

(a) 63.212 V (b) 36.8 V (c) 86.466 V (d) 100 V

Q.-89) Initial rate of rise of current through a capacitor of 10 μF when charged across 50 V

is 5 V/sec then the value of resistance through which it is charged is

(a) 2 MΩ (b) 1 MΩ (c) 5 MΩ (d) 10 MΩ

Q.-90) A capacitor of 1 μF is charged through a resistor of 5MΩ from a 200 V source then

charging current after 2 sec. is

(a) 0 μA (b) 40 μA (c) 13.406 μA (d) 26.812 μA

Q.-91) Initial charging current through a capacitor is 40 μA when charged through 1.5 MΩ

Resistor then supply voltage is

(a) 60 V (b) 80 V (c) 40 V (d) 20 V

Q.-92) Permittivity is also called as

(a) Dielectric constant (b) Dielectric strength

(c) Potential gradient (d) None of these

Q.-93) The ______ is also called as electric space constant.

(a) absolute permittivity (b) relative permittivity

Prof B S Bobdey
(c) permittivity of air (d) none of these

Q.-94) The capacitance of a parallel plate capacitor is directly proportional to

(a) distance between plates (b) cross sectional area

(c) length (d) all of these

Q.-95) The total charge on the parallel combination of capacitors is equal to the _____

of the charge on individual capacitors.

(a) multiplication (b) vector sum (c) sum (d) subtraction

Q.-96) A multiplate capacitor is equivalent to several two plate capacitor connected in _____.

(a) star (b) series - parallel (c) parallel (d) series

Q.-97) Multiple parallel plates are _____to form a multiplate capacitor.

(a) interleaved (b) sandwitched (c) interconnected (d) none of these

Q.-98) A capacitor charges ________ through a resistor R, when their series combination is
connected across a source voltage V.
(a) linearly (b) exponentially (c) nonlinearly (d) none of these

Q.-99) ______ is not involved in the RC discharging circuit.

(a) R (b) C (c) Voltage source (d) Switch


Q.-100) The current at t = 0 in RC discharging circuit is

(a) zero (b) infinity (c) unity (d) V/R

Q.-101) The discharging current flows ___________ of the charging current.

(a) for half the time (b) in the opposite direction

(c) in the same direction (d) all of these

Q.-102) The energy stored by a capacitor is equal to

(a) force exerted (b) charge acquired


(c) voltage applied (d) work done
Q.-103) Coulomb’s second law is called as

Prof B S Bobdey
(a) Inverse square law (b) Charge law

(c) Induction law (d) Force law

Q.-104) When ________ current flows for _____ the electric charge carried through the

conductor is equal to 1 Coulomb.


(a) 1 A , 1 hr (b) 10 A , 1 sec

(c) 1 A , 1 sec (d) None of these

Q.-105) The electric or electrostatic lines of force are imaginary lines which represent the
________ distribution in electric field surrounding the charged body.
(a) force (b) stress (c) power (d) field strength

Q.-106) The electric lines of force act like stretched elastic bands and always try to _______
in length.

(a) contract (b) expand (c) maximize (d) minimize

Q.-107) The electric lines of force adjust themselves so as to have a minimum _______.
(a) flux density (b) reactance (c) permittivity (d) reluctance
Q.-108) The electric flux density is defined as the ________ per ________ measured at right
angles to the direction of flux.
(a) force, unit area (b) force, unit flux
(c) flux, unit force (d) flux, unit area
Q.-109) The electric ________ is defined as the mechanical force experienced by a unit positive
Charge when it is placed at any point in the electric field.
(a) field strength (b) flux density

(c) potential (d) charge

Q.-110) The equivalent capacitance is always smaller than the smallest capacitance connected
in the _______ combination.
(a) star (b) series as well as parallel (c) parallel (d) series

Prof B S Bobdey
Prof B S Bobdey
Prof B S Bobdey
Prof B S Bobdey
Prof B S Bobdey

You might also like