Scribd
Upload
41 views

Siren

The document provides information about the SONF1 Alarm Horn Sounder. It is a compact, high output, 100dB(A) alarm sounder with low current consumption and high sound pressure level. It is suitable for general signaling applications including fire, security and process control. The summary includes key details about the product and its applications.

Uploaded by

SM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views

Siren

The document provides information about the SONF1 Alarm Horn Sounder. It is a compact, high output, 100dB(A) alarm sounder with low current consumption and high sound pressure level. It is suitable for general signaling applications including fire, security and process control. The summary includes key details about the product and its applications.

Uploaded by

SM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

2-21-010 / Fire & ind us trial aud ib le & vis ual s ignals

SONF1 Alarm Horn Sounder


The SONF1 is a compact, high output, 100dB(A) alarm sounder. Low current
consumption and high SPL in a robust fire retardant housing ensure it is
suitable for general signalling applications including fire, security and
process control.
So no ra range o ffers co mpact audio visual signaling fo r fire, industrial, pro cess co ntro l and
machine safety applicatio ns. The range features lo w current co nsumptio n co mbined with high
perfo rmance. The SONF1 is available with two levels o f so und level o utput and is CPR co mpliant
(tested to EN54-3) fo r fire alarm use. Appro ved by VdS and UL.

Features
Automatic synchronisation on multi-sounder system.
Continuously rated.
Stainless steel fixings.
Mounting via internal BESA compatible fixing positions (standard
version) or via external mounting lugs.
Duplicate cable terminations (in & out for daisy-chain
installations).
Tropicalisation available on request.
Available with custom tone configurations and frequencies.

Ap p ro vals
VdS approved: EN54-3 (CPD 89/106/EEC).

UL & cULs approved: General signalling use.

GOST-R approved. Cert: POCC GB.JB05.H00144.

Marine Equipment Directive (MED) Certificate: MEDB00001EH


S p ecif icatio n Part C o d es
Maximum output: 100dB(A) @ 1 metre [91dB(A) @ 10ft/3m] Ver si on : P ar t c od e:
Nominal output: 99dB(A) @ 1m +/- 3dB – Tone 1 [90dB(A) @ 24V dc SONF1DC24[b][x]
10ft/3m] 24V ac SONF1AC24[b][x]
No. of tones: 10 (UKOOA / PFEER compliant) 115V ac SONF1AC115[b][x]
No. of stages: 2 (AC voltage variants 1 stage) 230V ac SONF1AC230[b][x]
Volume control: On board potentiometer [b] = Back box No identifier: Sonora type – 3 x side & 1 x rear 20mm knockouts
Effective range: 30m/98.4ft @ 1KHz type: A: A100 type with lugs – 2 x side & 1 x rear 20mm knockouts
M: Multi type with lugs – 1 x side 20mm entry with stopping plug
Voltages DC: 24V dc (10-30V dc) Reverse polarity diode protection
on DC units. [x] = Enclosure G: Grey (RAL7038)
MED version: 20-30V dc colour: R: Red (RAL3000)
W: White
Voltages AC: 24V ac; 115V ac; 230V ac
Suffix part number with ‘-UL’ for UL approved version
Ingress protection: IP66 (UL version Type 13 & 3R )
Suffix part number with ‘-M’ for MED approved version [24V dc unit only]
Housing material: High impact UL94 V0 & 5VA FR ABS
Colour: Red (RAL3000), grey (RAL7038) & white.
Alarm S o und er
Cable entries: 4 x M20 clearance gland knockouts in side & back Ver si on : Vol tage: Cu r r en t:
Terminals: 0.5 to 1.5mm² cables. 24V dc 10-30V dc 25mA
MED version: 20-30V dc
Operating temp: -25 to +55°C [-13° to +131°F]
24V ac 50/60Hz +/-10% 40mA
Storage temp: -40 to +70°C [-40° to +158°F]
115V ac 50/60Hz +/-10% 13mA
Relative humidity: 90% at 20°C [68°F]
230V ac 50/60Hz +/-10% 13mA
Vibration Test: 35 cycles per second 0.01” for a duration 4Hr
(UL464)
Jarring Test: 5ft/lb Impact (UL464)
Impact Test: 3x 1lb @ 5ft (UL464)
Weight: 0.30kg/0.66Ibs
T o ne tab le
S 1 D e s c ri p t i o n S 2
T2 500/1200Hz @ 0.3Hz 0.5 sec Slow Whoop T1
T3 1200/500Hz @ 1Hz - DIN / PFEER P.T.A.P. T8
T4 544Hz (100mS)/440Hz (400mS) - NF S 32-001 T9
T5 Bell T1
T6 800/1000Hz @ 7Hz Sweeping T8
T7 500-1200Hz 3.75sec /0.25sec. Australian Evac. T 10
T8 \2.1000Hz Continuous - PFEER Toxic Gas
T9 \2.Continuous 554Hz
T 10 \2.420Hz @ 0.625 sec Australian Alert
\4.AC
Version
(Single
stage
only):
S1 \2.Description
T1 \2.800/1000Hz @ 0.25 sec Alternating
T2 \2.500/1200Hz @ 0.3Hz 0.5 sec Slow Whoop
T3 \2.1200/500Hz @ 1Hz - DIN / PFEER P.T.A.P.
T4 \2.544Hz (100mS)/440Hz (400mS) - NF S 32-001
T5 \2.1000Hz Continuous - PFEER Toxic Gas
T6 \2.Bell
T7 \2.800/1000Hz @ 7Hz Sweeping
T8 \2.2400/2900Hz @ 50Hz Sweeping
T9 \2.420Hz @ 0.625 sec Australian Alert
T 10 \2.500-1200Hz 3.75sec /0.25sec. Australian Evac.

E2 S Warning S ignals s ales @ e2 s .com www.e2 s .com 21 Oct 2019


No liability is accepted for any consequence of the use of this document. The technical specification of this unit is subject to chang e without notice due to our policy of continual product development. All dimensions are approximate. This unit is sold subject to our standard
conditions of sale, a copy of which is available on request.

You might also like