Scribd
Upload
42 views

Exercis-3 Student-Project

The document provides instructions and dimensions for students to create components of various mechanical assemblies in Pro/ENGINEER Wildfire, including a butterfly valve, double bearing, wheel support, and bracket support. Students are asked to create the individual parts and then assemble them for each project based on the provided figures and dimensions.

Uploaded by

Monty Kushwaha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
42 views

Exercis-3 Student-Project

The document provides instructions and dimensions for students to create components of various mechanical assemblies in Pro/ENGINEER Wildfire, including a butterfly valve, double bearing, wheel support, and bracket support. Students are asked to create the individual parts and then assemble them for each project based on the provided figures and dimensions.

Uploaded by

Monty Kushwaha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Student’s Project - Pro/ENGINEER Wildfire 1

Student’s Project 1

For information about Engineering Services offered by CADCIM, visit www.cadcim.com


Create all the components of the Butterfly Valve shown in Figure 1 and Figure 2 and then
assemble them. The dimensions for the various components are given in Figure 3 through
Figure 11. Assume the missing dimensions for the components.

Figure 1 Butterfly Valve assembly Figure 2 Inside view of the Butterfly Valve

Figure 3 Solid model of the Body Figure 4 Top view of the Body

Figure 5 Left side view of the Body Figure 6 Sectioned front view of the Body
2 Student’s Projects - Pro/ENGINEER Wildfire
For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 7 Top view of the Arm Figure 9 Dimensions of the Shaft

Figure 8 Sectioned front view of the Arm Figure 10 Dimensions of the Retainer

Figure 11 Dimensions of the Plate, the Nut, and the Screw


Student’s Project - Pro/ENGINEER Wildfire 3

Student’s Project 2

For information about Engineering Services offered by CADCIM, visit www.cadcim.com


Create different components of the Double Bearing assembly and then assemble them as
shown in Figure 12. Figure 13 shows the exploded view of the assembly. The dimensions of
various components are given in Figure 14 to Figure 18.

Figure 12 Double Bearing assembly

Figure 13 Exploded view of Double Bearing assembly


4 Student’s Projects - Pro/ENGINEER Wildfire
For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 14 Top view of the Cap Figure 16 Top view of the Base

Figure 15 Front view of the Cap Figure 17 Front view of the Base

Figure 18 Dimensions of the Bushing and the Bolt


Student’s Project - Pro/ENGINEER Wildfire 5

Student’s Project 3

For information about Engineering Services offered by CADCIM, visit www.cadcim.com


In this tutorial you will create all the components of the Wheel Support assembly and then
assemble them together as shown in Figure 19. The exploded view of the assembly is shown in
Figure 20. The dimensions of the components are shown in Figure 21, to Figure 25.

Figure 19 Wheel Support assembly


6 Student’s Projects - Pro/ENGINEER Wildfire
For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 20 Exploded view of the Wheel Support assembly

Figure 21 Dimensions of the Base Figure 22 Dimensions of the Support


Student’s Project - Pro/ENGINEER Wildfire 7

For information about Engineering Services offered by CADCIM, visit www.cadcim.com


Figure 23 Front view of the Wheel Figure 24 Sectioned side view of the Wheel

Figure 25 Dimensions of the Shoulder Screw, Bolt, Nut, Bushing,


and Washer
8 Student’s Projects - Pro/ENGINEER Wildfire

Student’s Project 4
Create all the components of the Bracket Support assembly and then assemble them as shown
in Figure 26. The Bill of Material is shown in Figure 27 and exploded view of the assembly is
For getting training on high-end CAD/CAM packages, visit www.cadcim.com

shown in Figure 28. The dimensions of the components are given in Figure 28 to Figure 33.

Figure 26 Pulley Support assembly

Figure 27 Parts list for the Pulley Support assembly


Student’s Project - Pro/ENGINEER Wildfire 9

For information about Engineering Services offered by CADCIM, visit www.cadcim.com


Figure 28 Exploded view of the Pulley Support assembly

Figure 29 Dimensions of the Pulley Figure 30 Dimensions of the Bushing


10 Student’s Projects - Pro/ENGINEER Wildfire
For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 31 Left side view of the Bracket Figure 32 Sectioned front view of the Bracket

Figure 33 Dimensions of the Washer, Cap Screw, Turn Screw, and


Nut

You might also like